Stopping connections to Service Manager server during an upgrade

Planning an upgrade from 2012 SP1 to R2. The more I read, the more questions I have. Document from MS says to make sure there are no connections to the Service Manager server during the upgrade. How is this possible? Most of our connections are through
Citrix so we can check Citrix connections and disconnect them but what about local installs of the console on client computers? Is there some shell command to run to see active connections and terminate them? If so, how to you keep them from reconnecting?

It's not really a big deal. just declare downtime and shut down your load balancer. a few errant connections won't cause a problem, but any changes that are submitted may not be saved.

Similar Messages

Oracle Services & Management Server

(1) I had installed Oracle 8.1.7 on Window2000 Advance Server. Generally in NT Server, upon restarting
server all services come up automatically, but my Oracle Services shows started and when I try to
connect through SQL Plus it gives me error "0RA-27101 - SHARED MEMORY REALM DOES NOT EXIST". So to
start up database I am using svrmgrl option.
Can somebody help in configuring services so that when I start server all services also come up
automatically.
(2) Also when I am trying to take Backup, it prompt message saying that connect to Oracle Management Server
and launch this Wizard. But I am not been able to configure my Oracle Management Server.. Can somebody
tell me how to configure Oracle Management Server so that I can take-up cold as well logical back up
using this option.

Hi,
If you have installed Enterprise Manager on your system, it comes with Configuration Wizard. The Configuration Wizard helps you to configure and set up OEM interactively.
You can find the information to configure the OEM under Oracle Enterprise Manager Configuration Guide has step-by-step procedure for setting up the OEM. You can find this documentation under the link
http://technet.oracle.com/docs/products/oracle8i/doc_library/817_doc/em.817/index.htm
Best of Luck
Mahesh

[SOLVED] "No connection to service manager" when enabling services

Following the wiki, trying to convert one of my Arch boxes to pure systemd. At step five ( https://wiki.archlinux.org/index.php/Sy … stallation ) where I am supposed to enable units to replace the daemons from rc.conf I hit a brick wall. Basically any time I use the systemctl command I get the message "No connection to service manager"
So running:
# systemctl status dbus
returns:
Failed to get D-Bus connection: No connection to service manager.
Any idea what is going on?
Last edited by marko2010 (2012-08-17 02:34:42)

I have this same error:
# systemctl -a
Failed to get D-Bus connection: No connection to service manager.
# systemctl enable syslog-ng.service
ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/syslog.service'
ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/multi-user.target.wants/syslog-ng.service'
[root@FX-8120 etc]# systemctl start syslog-ng
Failed to get D-Bus connection: No connection to service manager.
[root@FX-8120 etc]#
# uname -a
Linux FX-8120 3.8.4-1-ARCH #1 SMP PREEMPT Wed Mar 20 22:10:25 CET 2013 x86_64 GNU/Linux
# pacman -Q systemd
systemd 198-1
I can't remove initscript becouse more demons don't work propely with systemd like network, cond, aiccu, cpufreq, spamd, teamspeak3-server, etc....
Have you any idea why don;t work statu option systemctl?
Last edited by batot (2013-03-26 07:47:05)

To connect to oracle manager server

i try to connect to manager server but maybe i am with windows 2000 pro this function don't start.
when i go to de Panneau de configuration > Services. i don't find manager server so what i can do to connect to oracle manager server?
thanks for answer

If you have installed the Oracle AS 10.1.3 using an Apache in front the default port is 7777 as far as I know.
You wrote that the main page is accessible, that's why I would suspect that you might have a problem with your hostname. Are you accessing the mainpage via the full qualified hostname or via ip?
Please ensure that you can reach the server using the full qualified hostname!
If you are not sure about it, add an entry to your local hosts-file.
Please tell us if this was your problem!
Regards,
Eric

Cannot connect to service: sess_iiop://server:2481:orcl

Hello everybody,
I am trying to run Sample code HelloWorld to deploy session beans but getting this error Cannot connect to service: sess_iiop://server:2481:orcl.
Even sess_sh command giving the same error,how to configure iiop on client side.
I am doing everything acorrding to http://technet.oracle.com/sample_code/tech/java/ejb_corba/files/orderentry/EJBDirections.PDF
Using JDeveloper is also giving the same error UNKNOWN_SERVICE
Pls Can Any from u help me to solve this problem any version 815,816,817,9i,9ias.
Mangesh

for usability, performance reasons, as of 9i DB R2 we are discontinuing J2EE and CORBA stack support from within the database
EJBs should be deployed rather in iAS/OC4J - I won't get cycles from dev team to debug EJB in Database - unless it is a high priority/production system then customer should file a bug
Kuassi
Hi folks,
we have the same problem! We can connect with sess_sh to the Oracle9i system but we get the exception
javax.naming.CommunicationException: Unbekannter Dienst: 192.168.2.150:2481:rdrsl
while looking for the EJB from a java client.
We really need help!
Thx.

Service manager console can't connect to Service manager data warehouse SQL reporting services

When I start Service manager console, it gives this kind of error:
The Service Manager data warehouse SQL Reporting Services server is currently unavailable. You will be unable to execute reports until this server is available. Please contact your system administrator. After the server becomes available please close your
console and re-open to view reports.
Also in EventViewer says:
cannot connect to SQL Reporting Services Server. Message= An unexpected error occured while connecting to SQL Reporting Services server: System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.EnterpriseManagement.Reporting.ReportingService.ReportingService2005.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, SearchCondition[] Conditions)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String searchPath, IList`1 criteria, Boolean And)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String itemPath)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItem(String itemPath, ItemTypeEnum[] desiredTypes)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.GetFolder(String path)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReportingGroup.Initialize()
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath, NetworkCredential credentials)
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath)
at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupServerSession.TryConnectToReportingManagementGroup() Remediation = Please contact your Administrator.
We have a four server set-up where SCSM, SCDW, and sqls for both are on different servers. Also I have red that this could be a SPN problem, but this has been worked on last week without the SPNs.

On the computer you get the "SQL Reporting Services server is currently unavailable" message please open the Internet Explorer and try to connect to the URL <a href="http:///reports">http://<NameOfReportingServer>/reports
This should open the reporting website in IE. If this isn't working you should check the proxy settings in IE. If the URL doesn't work in IE it won't work in the SCSM console as well (and vice versa).
Andreas Baumgarten | H&D International Group
Actually I can't access to the reporting website. It asks me credentials 3 times and then return a blank page. Also error message comes to the EventViewer System log with id 4 and source Security-Kerberos.
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server "accountname".
The target name used was HTTP/"reporting services fqn". This indicates that the target server failed to decrypt the ticket provided by the client.
This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using.
Ensure that the target SPN is only registered on the account used by the server.
This error can also happen if the target service account password is different than what is configured on the Kerberos Key Distribution Center for that target service.
Ensure that the service on the server and the KDC are both configured to use the same password.
If the server name is not fully qualified, and the target domain (domain.com) is different from the client domain (domain.com), check if there are identically named server accounts in these two domains,
or use the fully-qualified name to identify the server.
I can access the website directly from the server which hosts Reporting Services.
Also I query "setspn -Q HTTP/"reporting services fqn" whit result NO SUCH SPN FOUND.

Newbee's question: Error connecting to the management server for the first time

Dear all, I am very new to the oralce world and got stuck today the first time I install oracle 8i on my win2k pro.
After the installation, I was trying to connect the Enterprise Manager Console for the first time, using the default user name sysman and password oem_temp (correct?). The problem is that I don't know exactly what is a management server, and what name it should be called. I named the database/sid name orarem, under D:\Oracle\admin\OraRem, does it have something to do with this issue?
I only installed the oracle enterprise server edition 8.1.6.0.0, not the Client part, will that matter if I only wanna run oracle on my stand alone desktop as a testing procedure for now?
Any help would be really appreciated!!

Bingo!! I had been trying dumping various .plist files
Not surprisingly i was a little hesitant about throwing the Airport folder in the bin.
First thing I did was to check it had been replaced on restarting!
Glad to say that "Check for updates" is now doing its thing.
I don't know why it gave me such grief, I just felt it could develope into something nasty down the line.
Thank you again.
Unfortunately they don't seem to have a points system for this topic.
Your fix should be available in Google from now on

Issue with installing second Service Manager server

We decided to install a second SM server to use as a test following the KB from MS below:
http://technet.microsoft.com/en-us/library/dn520899.aspx
We later found out that this install process had some issues and we needed a hotfix from MS to resolve it. The hotfix is basically a whole new installer MSI. MS had me uninstall SM and then reinstall using the MSI they gave me.
I am not getting the following error trying to do the install
Install Services
An error occurred while executing a custom action:_CreateMOMRegKey.
The upgrade attempt has failed before permanent modifications were made.
Upgrade has successfully rolled back to the original state of the syste. Once
the corrections are made, you can retry upgrade for this role.
The install rolls back and thats it. MS has been somewhat helpful but we still haven't gotten it resolved. Anyone else try installing this hotfix version of SM and run into the same issue?
The KB that refers to the replacement MSI is
KB2862620.

among other things, _CreateMOMRegKey creates registry keys related to ops manager and service manager. This is a common error with a management server reinstall, since these keys are not removed by an uninstall, and the creation method apparently does
not handle the case where they already exists. Consider
this thread.
The long and short of it is that you will probably need to remove the registry keys [HKLM\Software\Microsoft\Microsoft Operations Manager] and [HKLM\Software\Microsoft\System Center] as well as restore your management server's encryption key from the backup
you made after installing the first time.

Agents stopped repoting to the manager server

Hi,
I have two forests which connected via two way trust relationship. (lets call them A.domainA & B.domainB)
My MS server is a member server on Forest A.domainA and there are some servers on domin A.domainA which reports It.
Additionally there are some servers in domain B.domainB that reports to the MS server on domain A,DomainA.
After upgrading one of the Domain Controllers in domain B, All the agents stopped reporting to the MS. (the servers from domain A still reports)
I verified the trust relationship and it seem to be working fine.
What could be the reason for this kind of problem ? What should I check to understand the root cause of the problem ?
Kobi

1) I suggest that you should check the event log of the agent machine especially the operations manager event log and check any error message.
2) Open the operations console, go to monitoring workspace --> Operations Manager --> Agent Details --> Agent Health state --> Select the agent machine and click flush health service state and cache
Roger

Unable to connect siebel gateway name server during configuration enterprise server

Hi,
when I try to configure Siebel enterpise after entering the port of the gateway server name I get the following error: "Unable to connect gateway server name".
I perform the following steps:
1) Configuration Gateway Server Name
     Entered port TCP/IP = 2320
     Enable automaticaly start server gateway name server
     Show pop up "Configuration siebel succesful"
2) Configuration Enterprise Server
     Entered name account authentication gateway server name = SADMIN
     Entered passoword account authentication gateway server name = SADMIN
     Entered name host gateway server name = VDIMTNSIEBEL01 (name my machine)
     Entered port TCP/IP gateway server name = 2320
     show pop up error : "Unable to connect gatawey server name"
I can not find the log file in order to understand the issue.
When I try to connect to the gateway from the browser with the url
vdimtnsiebel01:2320 I get this screen mode:
???@??????? ?????????? ????????QÈ ??? ??????????? ??? ??? ? ?h????
and writes this log in the file "C:\siebel\8.1.1.0.0\ses\gtwysrvr\log\NameSrvr.log
SisnapiLayerLog Error 1 0000001151c810a0:0 2013-06-25 10:11:27   4980: [SISNAPI]: Rx msg len=0 peer=VDIMTNSIEBEL01.ISCVDI.LOCAL avail=325 Hello expected session=13
474554202F66617669636F6E2E69636F
20485454502F312E310D0A486F73743A
207664696D746E73696562656C30313A
323332300D0A557365722D4167656E74
3A204D6F7A696C6C612F352E30202857
696E646F7773204E5420362E313B2057
4F5736343B2072763A32312E30292047
65636B6F2F3230313030313031204669

Hi,
Please clarify me the following.
You specified the login name as 'SADMIN'. Is this the login id, that you used for your Operating System? "Entered name account authentication gateway server name" expects you to enter the NT login, not the DB login.
You may also expected to specify your network name, if your login id is specific to a network. e.g Oracle\Rajkumar assuming that Oracle is your network and Rajkumar is the user name.
You may not expected to have the DSN created, as Gateway may not be interested in knowing which DB you are connected to. And you neither enter the 'DB name' anywhere in the 'Gateway Server Configuration', if my understanding is right.
Please confirm.
Below pages are for reference (not directly relevant to your question):
http://docs.oracle.com/cd/B40099_02/books/SiebInstWIN/SiebInstCOM_Prep18.html
Bookshelf v8.0: Requirements for Siebel Gateway Name Server Installation and Configuration
Thanks.
Regards,
Rajkumar Raju

Passing environment variables to managed server during nmStart

I'm trying to script automated start with WLST using node managers but noticed that we're having some applications depending on some environment variables being set during startup.
How can I pass these from the node manager? Is it possible?
I'm trying to keep the number of nodemanagers to a minimum, otherwise I just could have just used a second one with these variables defined.
Edit: Could I just use os.environ perhaps for this?
Edit2: Say I wan't to use the admin console to restart said managed servers, is it possible to set these variables when starting from the adminconsole through the node manager?
Edited by: user13100625 on Aug 23, 2011 11:23 AM
Edited by: user13100625 on Aug 23, 2011 12:04 PM

os.environ did not work because the nodemanager forks a new process inherited on it self... seems like I need a second nodemanager...

Cannot connect to service manager portal wcf service

I only get this error on one request offering. Everything else on the portal works fine. This RO worked until I update one of the user prompts. The prompt is a query result that is configured to return domain users only of display name
equals the users that I have listed. I have about 40 users display names listed under the criteria. I didnt set token, do I have to?
What else might effect the WCF service for only one item on the portal?
- Get on the floor, do that dinosaur

Well I looked in the silverlight trace log which said:
The maximum string content length quota (24576) has been exceeded while reading XML data. This quota may be increased by changing the MaxStringContentLength property on the XmlDictionaryReaderQuotas object used when creating the XML reader.'. Please
see InnerException for more details.
I'm not sure how to increase this though.
- Get on the floor, do that dinosaur

RE:connection to port 6241 failed during java upgrade

Hi all,
We are performing Java Upgrade and we are stuck in the intial stage stage. The problem is connection to port 6241 failed .
We have retained the default port.
Thanks and Regards,
sowmya

Hi Regelio
As Van mentioned above,the issue may caused by the TAO NT Naming service.
Please check the status of TAO NT Naming service/License Manager
when the issue happens.And in case the error is really caused by
those services,please try to re-install the whole server tools.
Also,if the issue still persists,as another workaround we suggest you to use a simple
batch script to test the Status of the TAO NT naming service,
and restart it when the services was stopped.
Such a script can be launched with windows scheduled every several
minutes.
@echo off
net start find "TAO NT Naming Service"
IF %ERRORLEVEL% EQU 0 (
echo Ok - "TAO NT Naming Service" is running
) ELSE (
echo Error - "TAO NT Naming Service" is not running
net stop "TAO NT Naming Service"
net stop "SAP Business One License Manager 2005"
net start "TAO NT Naming Service"
net start "SAP Business One License Manager 2005"
Regards,
Syn Qin
SAP Business One Forums Team

Service Manager Data Warehouse Install - Analysis Server Configuration For OLAP Cubes Fail

Hello everyone,
I have an issue with my installation of the Data Warehouse for System Center Service Manager 2012 SP1.
My install environment is the following:
Windows Server 2012 – System Center Service Manager (Successfully Installed) - Virtual
Windows Server 2012 – System Center Data Warehouse (Pending) - Virtual
Windows Server 2012 – MS SQL Server 2012 – Physical, Clustered 1<sup>st</sup> of Four Servers
The SQL Server is a clustered installation with named instances, specifically for SharePoint and Service Manager. Each instance has its own IP address and dynamic ports are turned off. I’m installing using the domain administrator account and I also chose
to run the installer as administrator. The domain admin has sysadmin rights to the service manager server and instance I’m trying to install on. However, the account does not have sysadmin rights to some of the other instances.
The install is smooth up until it needs to connect to the Analysis server database. I have tried connecting to the analysis servers on other SQL servers on site and all were successful. The only difference between the older SQL servers, the SQL 2012 development
server and the SQL 2012 Production server I’m trying to install to is that the that the domain admin account doesn’t have sysadmin access on all the databases on the new production server. The SQL server is being installed and configured by a contractor so
if you all have troubleshooting suggestions, I’ll need to coordinate with the contractor.
Starting with the screen below, I began searching for help online. There seems to be no one else with this issue or it is not documented properly. I opened a ticket with MS, called the contractor and troubleshot with him, troubleshot as far as I could on
my own and I’m still at a loss as to what is preventing the installer from connecting specifically to the analysis server.
I first thought the installer was at issue or that the data warehouse sever was at issue. But all signs are pointing at the SQL server. The installer is able to connect to all the other SQL servers – including other 2012 servers (same versions) – so it can’t
be the installer. I’m pretty sure the SQL server is going to be at issue.
After looking at this error, I opened the resource monitor and clicked the dropdown to see if it was trying to connect to the correct server and it was. I then connected to the old and new test and development servers successfully. Then connected to the
SQL 2008 R2 production cluster successfully. I then compared the two servers. The only difference other than the version numbers is that the admin account doesn’t have sysadmin rights on all the SQL 2012 database servers. But the database servers are not the
problem. The analysis servers are.
I then checked the event logs and they are empty as far as this issue is concerned. Actually, there are no errors on the SQL 2012 production box and the Data Warehouse box. I then checked the log that the installer creates during every step of the installation
and this is what is created when the dropdown is clicked for the analysis server configuration screen. The log file location is:
“C:\Users\admin\AppData\Local\Temp\2\SCSMSetupWizard01.txt”
In the file is the following text.
01:03:34:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012
01:03:34:Using SQL Server 2012 management scope on SCSMSQL2012
01:03:36:Collecting SQL instances on server SCSMSQL2012
01:03:36:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:36:Using SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:38:Found SQL Instance: SCSMSQL2012\PWGSQL2012
01:03:38:Found SQL Instance: SCSMSQL2012\SCSMSQL2012
01:03:39:Error:GetSqlInstanceList(), Exception Type: Microsoft.AnalysisServices.ConnectionException, Exception Message: A connection cannot be made. Ensure that the server is running.
01:03:39:StackTrace:   at Microsoft.AnalysisServices.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo)
   at Microsoft.AnalysisServices.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo)
   at Microsoft.AnalysisServices.XmlaClient.OpenConnection(ConnectionInfo connectionInfo, Boolean& isSessionTokenNeeded)
   at Microsoft.AnalysisServices.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession)
   at Microsoft.AnalysisServices.Server.Connect(String connectionString, String sessionId, ObjectExpansion expansionType)
   at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetASVersion(StringBuilder sqlInstanceServiceName)
   at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetSqlInstanceList(String sqlServerName, Int32 serviceType)
I’m now investigating the issue according to this output, and decided to ask you all if you’ve run into this issue and found a resolution.

I am running into same issue . But I don't anything in the instances section related to portipv6 . I do see in the listener section , I tried to remove it . But it comes up again . Please help
<ConfigurationSettings>
<Security>
<RequireClientAuthentication>0</RequireClientAuthentication>
<SecurityPackageList/>
</Security>
<Network>
<Listener>
<RequestSizeThreshold>4095</RequestSizeThreshold>
<MaxAllowedRequestSize>0</MaxAllowedRequestSize>
<ServerSendTimeout>60000</ServerSendTimeout>
<ServerReceiveTimeout>60000</ServerReceiveTimeout>
<IPV4Support>2</IPV4Support>
<IPV6Support>2</IPV6Support>
</Listener>
<TCP>
<MaxPendingSendCount>12</MaxPendingSendCount>
<MaxPendingReceiveCount>4</MaxPendingReceiveCount>
<MinPendingReceiveCount>2</MinPendingReceiveCount>
<MaxCompletedReceiveCount>9</MaxCompletedReceiveCount>
<ScatterReceiveMultiplier>5</ScatterReceiveMultiplier>
<MaxPendingAcceptExCount>10</MaxPendingAcceptExCount>
<MinPendingAcceptExCount>2</MinPendingAcceptExCount>
<InitialConnectTimeout>10</InitialConnectTimeout>
<SocketOptions>
<SendBufferSize>0</SendBufferSize>
<ReceiveBufferSize>0</ReceiveBufferSize>
<DisableNonblockingMode>1</DisableNonblockingMode>
<EnableNagleAlgorithm>0</EnableNagleAlgorithm>
<EnableLingerOnClose>0</EnableLingerOnClose>
<LingerTimeout>0</LingerTimeout>
</SocketOptions>
</TCP>
<Requests>
<EnableBinaryXML>0</EnableBinaryXML>
<EnableCompression>0</EnableCompression>
</Requests>
<Responses>
<EnableBinaryXML>1</EnableBinaryXML>
<EnableCompression>1</EnableCompression>
<CompressionLevel>9</CompressionLevel>
</Responses>
<ListenOnlyOnLocalConnections>0</ListenOnlyOnLocalConnections>
</Network>
<Log>
<File>msmdredir.log</File>
<FileBufferSize>0</FileBufferSize>
<MessageLogs>Console;System</MessageLogs>
<Exception>
<CreateAndSendCrashReports>0</CreateAndSendCrashReports>
<CrashReportsFolder/>
<SQLDumperFlagsOn>0x0</SQLDumperFlagsOn>
<SQLDumperFlagsOff>0x0</SQLDumperFlagsOff>
<MiniDumpFlagsOn>0x0</MiniDumpFlagsOn>
<MiniDumpFlagsOff>0x0</MiniDumpFlagsOff>
<MinidumpErrorList>0xC1000000, 0xC1000001, 0xC100000C, 0xC1000016, 0xC1360054, 0xC1360055</MinidumpErrorList>
<ExceptionHandlingMode>0</ExceptionHandlingMode>
<MaxExceptions>500</MaxExceptions>
<MaxDuplicateDumps>1</MaxDuplicateDumps>
</Exception>
</Log>
<Memory>
<HandleIA64AlignmentFaults>0</HandleIA64AlignmentFaults>
<PreAllocate>0</PreAllocate>
<VertiPaqPagingPolicy>0</VertiPaqPagingPolicy>
<PagePoolRestrictNumaNode>0</PagePoolRestrictNumaNode>
</Memory>
<Instances/>
<VertiPaq>
<DefaultSegmentRowCount>0</DefaultSegmentRowCount>
<ProcessingTimeboxSecPerMRow>-1</ProcessingTimeboxSecPerMRow>
<SEQueryRegistry>
<Size>0</Size>
<MinKCycles>0</MinKCycles>
<MinCyclesPerRow>0</MinCyclesPerRow>
<MaxArbShpSize>0</MaxArbShpSize>
</SEQueryRegistry>
</VertiPaq>
</ConfigurationSettings>

Stop managed server without node manager and admin server

What are the commonly used ways to stop managed Weblogic server without node manager running and without administration server running?
(I have only one solution: on the managed server startup dump process ID to a file, and then when I want to stop it, send a signal to this process ID and kill JVM. But it seems not very clean way.)
(The managed server is started when both node manager and admin server are down, and I provide boot.properties of admin server to the managed server to start.)
UPDATED: And I don't want to start neither admin server, nor node manager even temporarily.
Edited by: user12163080 on Jun 24, 2010 4:40 AM

Hai,
I read the Oracle weblogic wlst script document without Admin server you cannot connect the managed server through the WLST script. see the below lines
"The start command starts Managed Servers or clusters in a domain using Node Manager.
To use the start command, WLST must be connected to a running Administration Server.
To start Managed Servers without requiring a running Administration Server, use the
nmStart command with WLST connected to Node Manager."
"You shut down a server to which WLST is connected by entering the shutdown command
without any arguments.
When connected to a Managed Server instance, you only use the shutdown command to shut
down the Managed Server instance to which WLST is connected; you cannot shut down another
server while connected to a Managed Server instance.
WLST uses Node Manager to shut down a Managed Server. When shutting down a Managed
Server, Node Manager must be running.
In the event of an error, the command returns"
They are two option if you are using adminserver then we can stop the any Managed server.
The option is if you are using the nodemanager without admin server we can stop the any Managed server.
The last final solution to kill the particular Managed server pid.
Regards,
S.vinoth babu

Stopping connections to Service Manager server during an upgrade

Similar Messages

Maybe you are looking for