Stopping Data Reception/Synchronization at the Phone

I have a user that will be traveling out of the country and does not want email redirection being stopped at our BES server - he wants to be able to use the phone but not receive emails unless he turns a setting on the phone on (and conversely wants to be able to turn it off again).  I did not see anything in the manual about stopping / starting synchronization at the phone itself.  Any advice would be appreciated.  Thank you  in advance.

The only option would be to turn data off on the device. Mobile Network options would be your best bet there.
If you are the original poster (OP) and your issue is solved, please remember to click the "Accept as Solution" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the Star on the left of their post.

Similar Messages

  • HT201210 I have 4s facing hang problem after updating when i dicline the call the keypad geting locked ,touch stop working unable to unlock the phone .then what i can do i restart the phone with pressing home key & power key together then i am able to ace

    I have 4s with 16GB storage capacity using IOS 7.1.2.
    Facing hang problem after updating when i decline the call the keypad getting locked ,touch stop working unable to unlock the phone .
    Then what i can do i restart the phone with pressing home key & power key together then i am able to access it.
    Kindly resolve the issue as soon as possible
    Ashish
    [email protected]

    Did you already try to set it up as a new device, as explained in this article?
    iOS: How to back up your data and set up your device as a new device

  • HT201210 my iphone was being updated when it was ready to restore it stops sayin an error ocured, the phone wont oparate cant get it to restore

    my iphone was being updated when it was ready to restore it stops sayin an error ocured, the phone wont oparate cant get it to restore

    any specific error messages? If so, check out http://support.apple.com/kb/ts3694 for solutions
    if not, force restore: http://support.apple.com/kb/ht1808
    NB: make sure you have a backup, because following the last article will remove all data/content on the device.
    Good luck

  • How to get backed up data in iphone3gs when the phone is disabled

    how to get backed up data in iphone3gs when the phone is disabled

    can someone help? this is shaking my trust in icloud backups.
    i am on iOS 6.1.

  • Iphone 5 stuck on connect to itunes screen- if i try and get it out of recovery mode it trys to extract the data and then says the phones memory is full

    iphone 5 stuck on connect to itunes screen- if i try and get it out of recovery mode via itunes,  it trys to extract the data and then says the phones memory is full- cant seem to get it sorted, any ideas? I have an ipad mini if that helps?!

    Hey craigfromsheffield,
    I would suggest that you use the following information in order to help you resolve this issue:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • I live in an area with poor data reception. Will the Maps app work without internet access?

    I live in an area with poor data reception. Will the Maps app work without internet access?

    Google Maps
    Type in 'Ok maps' (no quotes) in the search and press enter
    It will download the map area shown on the screen for offline use

  • I somehow erased everything (all important dates) off my ical on my mac and I'm afraid that if I connect my iphone that it will do the same there.  Will my iphone sync the dates that are on the phone and add them to the ical?  Or will it delete everything

    I somehow erased everything (all important dates) off my ical on my mac and I'm afraid that if I connect my iphone that it will do the same there.  Will my iphone sync the dates that are on the phone and add them to the ical?  Or will it delete everything

    Contacts are designed to be synced to a supported application on the computer or a cloud service.
    Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
    If you have failed to use the device as designed it may be too late to recovery anything.
    Is the device regularly backed up to a computer via iTunes?  If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

  • How do I use cellular data while talking on the phone?

    How do I use cellular data while talking on the phone?

    If your carrier supports it, you just use it like you would if you were not on the phone. Use a headset or put it on speaker, press the home button, and do whatever you want...
    If you use a CDMA carrier (Sprint, Verizon, etc.) then you can not use cellular data while on a voice call.

  • My iphone 5 speakerphone just stopped working today while on the phone?  whats going on?, My iphone 5 speakerphone just stopped working today while on the phone?  whats going on?

    My iphone 5 speakerphone just stopped working today as i was on the phone.  i have tried to use it, and it doesnt work.  THis really stinks because now im completly unable to video chat and do other things.. please help!!!

    Booked into the Genius Bar at the Apple store in the Manchester Arnedale shopping centre and arrived on time today.
    The staff asked if I had backed it up, which I responded that I had. I also explained that I had been on the forums and followed some of the advice.
    My iphone 5 was only 7 months old and still under warranty, so I should have expected excellent service, and I got it. The phone was repaired by the store and returned to me approximately 30 minutes earlier.
    Happy days.

  • My i phone 3gs seems to have crashed and all that is on the screen is the i tunes logo and the usb cable, will i lose all my data if i restore the phone or is there a way of doing it without losing all data ?

    my i phone 3gs has crashed and all that is left on the screen is the i tunes logo and the usb cable picture, when i plug the phone into my laptop its asking me to restore the phone and this will erase all my data. is there any way around this so i dont lose all my pictures ?

    Connect your iphone to your computer
    Hold down the home button and the power button until the screen goes blank
    Turn back on your phone.
    Your phone has seemed to enter recovery mode, but its ok! The steps above should bring it out

  • HT4623 i reset my iphone by erasing the data without backup. now the phone is empty. what should i do?

    When i on the phone, it shows itunes icon. I downloaded itunes, it detected the iphone but asking me to restore before i can sync. how do I get to useable mode?

    Either you will have to restore something on the phone before you can sync it or your only other alternative if you deleted everything without a backup is to restore the phone as new.

  • Streaming audio data won't stop unless I turn off the phone for 5 minutes.

    I have been testing the Curve 8330 regarding streaming audio from an icecast server. The address of the station is http://www.AirProgressive.org, click on "listen". (I have already run this by the icecast experts and they say it is a Blackberry "bug")
    BLACKBERRY USERS! PLEASE BE AWARE THAT THE STREAM (dataflow) DOES NOT STOP WHEN YOU CLICK "STOP" ON THE MEDIA PLAYER! (and will continue for as long as you leave it on, and even if you turn off your BB for less than 5 Minutes.) I'm not sure if you are charged for these streams, but it seems that the battery is depleted rapidly if this continues without aborting it. See details of my testing below:
    > Access icecast stream by clicking on the link on the website:
         http://www.airprogressive.org:8000/stream.m3u
    > Stream consists of mp3 at 32kbps / 22050 Hz.
    > Stock media player launches, stops at "Do you want to open or save the item."
        > No connections started yet (viewing "List Clients" page of icecast admin interface).
    > Click "open", stream begins playing.
    > Two connections are started instead of just one, always offset by 2 seconds.
        -- but sometimes only one connection starts.
    > FYI, Icecast config: <client-timeout>30</client-timeout>
    Here is the output from the "List Clients" page of Icecast2 Admin
    IP
    Seconds Connected
    User Agent
    Action
    68.7.238.55
    406
    WinampMPEG/5.62, Ultravox/2.1
    Kick
    74.82.68.16
    6
    Mozilla/4.8 [en] (Windows NT 5.0; U)
    Kick
    74.82.68.16
    4
    Mozilla/4.8 [en] (Windows NT 5.0; U)
    Kick
    Note the last two entries with the same IP address. This is the Blackberry. Top entry is winamp player on PC for reference. Don't know why two listener connections are generated.
    > Stream is "Stopped" (i.e. click stop)
    > Stream is restarted (i.e. click Play)
    > A new connection is started, this time with a new +1 IP address.
    IP
    Seconds Connected
    User Agent
    Action
    68.7.238.55
    687
    WinampMPEG/5.62, Ultravox/2.1
    Kick
    74.82.68.16
    287
    Mozilla/4.8 [en] (Windows NT 5.0; U)
    Kick
    74.82.68.16
    285
    Mozilla/4.8 [en] (Windows NT 5.0; U)
    Kick
    74.82.68.17
    8
    Mozilla/4.8 [en] (Windows NT 5.0; U)
    Kick
    I can understand that the player may continue to communicate when "stopped" to fill the lookahead buffer, but when it is restarted, it should use the same connection and not start a new one.
    > Click Stop.
    > Click Play.
    IP
    Seconds Connected
    User Agent
    Action
    68.7.238.55
    803
    WinampMPEG/5.62, Ultravox/2.1
    Kick
    74.82.68.16
    403
    Mozilla/4.8 [en] (Windows NT 5.0; U)
    Kick
    74.82.68.16
    401
    Mozilla/4.8 [en] (Windows NT 5.0; U)
    Kick
    74.82.68.17
    124
    Mozilla/4.8 [en] (Windows NT 5.0; U)
    Kick
    74.82.68.18
    24
    Mozilla/4.8 [en] (Windows NT 5.0; U)
    Kick
    > Yet another connection is started with a new "listener".
    > Click "back" to exit from browser in Blackberry.
    > All threads continue.
        --> I have tested this many times and the threads continue without being cleaned up indefinitely, even though the player is stopped and the stream is not "playing" on the handset.
    > Turn off mobile network. Handset not communicating.
    > Threads continue
    > Handheld turned off.
    IP
    Seconds Connected
    User Agent
    Action
    68.7.238.55
    995
    WinampMPEG/5.62, Ultravox/2.1
    Kick
    74.82.68.16
    595
    Mozilla/4.8 [en] (Windows NT 5.0; U)
    Kick
    74.82.68.16
    593
    Mozilla/4.8 [en] (Windows NT 5.0; U)
    Kick
    74.82.68.17
    316
    Mozilla/4.8 [en] (Windows NT 5.0; U)
    Kick
    74.82.68.18
    216
    Mozilla/4.8 [en] (Windows NT 5.0; U)
    Kick
    Finally, after over 300 seconds, the threads are finally cleaned up.
    IP
    Seconds Connected
    User Agent
    Action
    68.7.238.55
    1139
    WinampMPEG/5.62, Ultravox/2.1
    Kick
    So, to stop the streaming server from communicating with the Blackberry handset, you must either turn it off or disable mobile network for at least 5 minutes.
    It appears that the handset continues to transfer data (and therefore incur charges, if the user does not have an unlimited data plan) if the handset is not turned off or mobile network disabled for at least five minutes. It also runs down the battery much faster because the radio transmitter is actively being used, even if the user is not listening to the stream.
    The Blackberry network has intervening servers that continue to receive data from the streaming server even if the handset is off. This behavior likely has utility to deal with the realities of the cellphone network, to allow the stream to be transferred from one cell to another, and deal with the possibility that the handset may be out of range for up to 5 minutes without "interruption." However, it is hard to turn off the stream.
    QUESTIONS:
    1. Is there a way to stop this sort of behavior using a configuration setting or something? It seems particularly stupid to start a new stream connection each time a STOP/START cycle is completed, allowing the old connections to continue streaming data (even if the data does not make it to the handset).
    2. IS IT TRUE that the user will be "charged" for the data streams that are not disconnected?
    3. Is there a way for a developer to send a signal to the intervening cellphone network to discontinue the orphan streams?
    THANKS!!

    No, I'm using something like this :
    to start...
                       channel = new SoundChannel();
                                            soundPlay = new Sound();
                                            urlReq=new URLRequest;
                                            urlReq.url=mylUrl;  // url of radio mp3
                                            soundPlay.load(urlReq);
                       channel = soundPlay.play();
    to stop it...
                          channel.stop();
                          channel=null;
                          try{soundPlay.close();} catch (e:Error) {} // error or not, the sream won't stop.
    Any idea ? Did you try with a NetStream object ?
    Bernard

  • Resetting the date and time after the phone has be...

    Hi,
    I keep having to reset the date and time very time I turn my phone off. I was thinking it was to do with the battery so I fully charged it, turned it off then turned it on again and it asks me for the date and time.
    I only noticed this because I've had exams and I have to turn my phone off for them.
    Could it be a dying internal battery?
    I know with computers there's a BIOS battery that controls date and time. When they start to die the date and time are inaccurate.
    I'll have to find time to take it to the 3-Mobile shop either on Sunday or sometime next week if it is an internal battery problem.
    Thanks,
    Omar
    "A Jade stone is useless before it is processed; a man is good-for-nothing until he is educated."

    Hi omar3256
    I believe that there is a very small component on the motherboard which serves this purpose, although whether battery or sort of capacitor I am not certain. The N80 especially seemed to be prone to this failure.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Start and stop data saving while running the vi

    Hi everybody!
    Maybe someone can help me on this topic:
    I
    would like to run a vi which displays voltage values on a waveform graph without saving the values automatically. But - while running the vi - I would like to have the option to
    save the data. That's why I created a switch (on: save data, off: don't
    save data). I wanted to wire the switch to a case structure, but I
    don't know where to put the case structure and the "open/create
    file-vi". If I put both into the while loop (where I write the data to
    the spreadsheet file) then - of course - it asks me with every run of
    the loop where to save the data.
    If I put the "open/create file-vi"
    outside the loop it asks me at the beginning of the application where
    to save the data, even though I maybe don't want to save data.
    I don't know if it's understandable what I mean:
    If
    I run then vi I would like to see the data without saving it first
    (on the waveform graph), then I maybe would like to save it, so I
    want to press a button to save the data. The vi should ask me where I
    want to save the data while still running. I would also like to stop
    saving data without stopping the run of the vi. Maybe I would like to
    save data to another file within the same run.
    Do you know what I mean?
    Thank you very much.
    Kind regards,
    Steffi

    Hi Steffi,
    your first solution was ok as long as you don't restart the vi without removing it from memory before.
    When loading the vi into memory the shift register (SR) is reset to zero and is keeping the value from last iteration.
    Now you initialized the SR in each iteration to zero, hence the 0-0.250 range of the time scale. To keep the last value you can use another SR as shown in the attachment or use some math based on the iteration count (start time= i * 0.25).
    You should only learn from this: initializing SRs makes your vi more reliable... A SR is nothing more than a variable in text based languages, so keep them initialized!
    Message Edited by GerdW on 11-07-2007 01:27 PM
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome
    Attachments:
    ekg2_mod.vi ‏394 KB

  • HT4623 I just bought an Iphone 4S. My version of Itunes on my windows Vista computer is out of date to sync with the phone. How do I upgrade?

    My new Iphone 4s will not sync to my Itunes. I have windows vista on my computer ant when i plug in my phone it tells me I need a version 10.6.3 or later but my computer will not run this download. What is the solution?

    Very top left corner>half white half black box> show menu bar> Hit help and then Check for update
    Hope this helps!

Maybe you are looking for

  • Body of email displayed is not from the sender in the header

    I could not find anything about this in a search, and a visual scan of the discussions. After two weeks of being shut down (vacation), and occasionally during that time accessing email through dotMac, I encountered the following when I restarted my h

  • How can you tell which computer that is authorized as the master?

    I have several computers that I have connected my iPhone to. How can I tell which computer I should connect to before updating the operating system? I don't want to loss data if I don't have to.

  • Configuration of Waiting List in T&D 4.6

    Hi Experts, Once again I need a help. Could you, please, tell me where can I change the pre-configuration of the maximum number of accepted attendees in an event Waiting list? I am still in doubt if this is possible to do, but I expect it is. Tks in

  • Join two tables which stored in difference database

    Hi, i have a problem how to join two tables which are stored in difference databases. I'm using MS access and need to use Jsp to solve it. is anyone have idea to solve it. thxx

  • Determine VKONTO only with the help of SERNR

    Hello to all, I'm new in IS-U EDM. I have to specify VKONTO out of the device SERNR. Is there a function module in order to do this or must this be done manually? What tables are involved in order to get this information? Are the duplicate devices. W