Stopping exchnage trasnport service

there is a problem with the forefront protection for exchange server, troubleshooting it needs the forefront servie to be stopped. However, the forefront protection controller service is dependent on exchange transport service. Is there any way to stop
forefront protection controller service without affecting the exchange transport service? or what happens if the transport service is stopped. Where will all the mails go?

Hi Soma,
Thank you for your question.
In order to meet your requirement, We could let Exchange server disconnect Forefront by the following link:
https://support.microsoft.com/en-us/kb/929076?wa=wsignin1.0
After we do it, we could troubleshoot Forenfront. After we troubleshoot, we should recovery connectivity.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Similar Messages

I forgot my Apple ID password and security question. Also the email I'd is not accessible as the organisation has stopped their email service. How can I now update my applications which I downloaded using this Apple ID. Please help

I forgot the password of my Apple ID that I used for downloading apps when I newly bought my mac book back in 2011 October.
Now I forgot the password and also the security question.
Also the email service provider has stopped their email service and hence m not able to use email authentication as well.
Now I am lost, how will i update the applications that I downloaded using this Apple ID.
Please help

Saunakhvshg,
contact Apple directly.

How to start and stop the BI Services in Solaris 10

Hello All,
Can anyone guide me on how to start and stop the BI Services in Solaris 10. In windows there are options set in Start->Programs->Middleware_Home->Start/Stop BI Services.
Primarily after doing changes to the scheduler configuration, I need to restart the services to get it implemented? If yes how can I do it?
Any help will be appreciated
Thank you
Ash
Edited by: 902739 on Jan 11, 2012 12:17 PM

Please help me by showing action plan for stop sap , offline backup and then start sap.
i am little bit confuse How to start and stop SAP on cluster for offline backup
Below are the systems name with host name , please explain me in sequence
Systems name                                   Hostname
# Hope SAP ERP Prod DB Primary       gsgbbux860
# Hope SAP ERP Prod DB Standby      gsgbbux861
# Hope SAP ERP Prod Cluster              gsgbbux862
# Hope SAP ERP App 1                       gsgbbux864
# Hope SAP ERP App 2                       gsgbbux865
Thanks in advance
Zaheer

The visual Studio Test controller service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs

We are using VS2013 Premium. i have installed vs2013 Test controller in my dev environment. While i am configuring (https://msdn.microsoft.com/en-us/library/hh546459.aspx) getting error message in
the Configuration summary dialog box displaying following error's : 1. Failed to Configure TFS Team Project Collection, 2. Could not complete operation as the time out expired. ''
I have checked the "visual Studio Test controller " in the
Services --> Administrative. Its automatically stopped the service. When i started the manually its showing message like as 'The visual Studio Test controller
service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs'
Please guide me how to resolve this problem.
Thanks in Advance...

Hi Divakar,
What’s the version of your TFS?
How do you configure the test control?
Please make sure you are specify the team collection instead of team project.
On the other hand, you may enable test controller logs. (You could share the log file on the OneDrive)
# How to enable test controller logs
http://blogs.msdn.com/b/aseemb/archive/2009/11/28/how-to-enable-test-controller-logs.aspx
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I stop a report service manually ?

How can I stop a report service manually in DOS command?
I only know start a report service manually in DOS command.For example:rwserver service=repljbass

My start/stop scripts for Solaris looks like this.
Start:
rwserver.sh server=reportserver batch=yes
Note: batch=yes means that the extra control window doesn't start (at least on Unix)
Stop:
rwserver.sh server=reportserver shutdown=immediate authid=repadmin/reports
Just remove the .sh and it'll work on your PC.
PS. The complete Solaris start command I use is:
exec nohup rwserver.sh server=reportserver batch=yes &

Start and Stop Oracle BI services on UNIX box?

Hi All,
We have OBIEE installed on the Unix Servers and want to start and stop the Bi services.
What is the command to do so?

user11001347 wrote:
Hi,
At the Unix prmompt I am executing the following command but it throws an error saying : run-sa.sh command not found,I am in the OracleBI\Set up Directory on the unix machine
-bash-3.00$run-sa.sh stop
does anyone has idea is that the exact command to I am missing anything?In what directory are you trying to execute that command? Do "pwd" to see where you are. You seem to need Unix training. In Unix (like in DOS) you can only execute a command/program that exists the PATH environment variable. Most likely the OBIEE bin directory won't be in the path, unless someone specifically added it. Further more the current directory (referred as ".") is not usually in the PATH variable either so when you execute commands you have to prefix them with the full path or with the current directory as Vinodh suggested.

Allow a user access to start and stop a particular service in Solaris 11 using RBAC controls

So, using svcbundle I created a service called "oracle" that starts and shutdown a db. I'm aware of how to grant RBAC access to be a "service operator" to be able to control start/stop ALL services. But I'd like to grant a user access to start and stop JUST this service.
in this document on page 15, it states that it's possible to do this kind of granularity but doesn't explain how to do it step by step.
how does one achieve this?
thanks.

You need to add a property group such as
<property_group name='general' type='framework'>

<propval name='action_authorization' type='astring'
value='solaris.smf.manage.oracle' />
</property_group>
Then add the solaris.smf.manage.oracle authorization to the user profile.
As an example, see Less known Solaris features: RBAC and Privileges - Part 2: Role based access control - c0t0d0s0.org

Stop and Start Services

Hi All,
We are stopping and starting the services for daily backup. Is it advisable to stop and start services.
Because client wants to stop the services before taking the backup anf start the services after backup.
In this scenario, what services do we need to stop for backup process.
Regards,
Kumar

Hi Saichand,
Thanks for the response.
Do u have any idea on the below:
Our scenario is the below:
We have a daily back of BI folders and Loading data from ERP to 10g database.
We logged in with remote desktop user A from ABC system to BI system and We created a batch file to start and stop all the BI the services and scheduled this batch file using windows schedule tasks. These batch files will stop the BI services and after 30 minutes another batch file will load data into the database, after 2 hours start services batch file will start the BI services.
When we open the BI Dashboards in the morning, all the dashboards and reports are working fine. But when I login to BI system, OC4J windows is not visible and dashboards are not coming and when we check the logs, LOGs says OC4J is running.
Please suggest us the solution.
Regards,
Kumar
Regards,
Kumar
Edited by: user597882 on Aug 26, 2010 3:35 AM

Start/stop the OMS Services on Same Host

Hi,
I have OMS, Repository database and Agent on the same host.....
I want to stop and start the services...
==========================
FOR Shutdown
=====================================
Stop the Agent
$cd $ORACLE_HOME/agent10g/bin/emctl stop agent
stop the OMS Services
$cd $ORACLE_HOME/oms10g/opmn/bin/opmnctl stopall
Stop the Repository Databas Listner
$cd $ORACLE_HOME/bin/lsnrctl stop LISTENER
STOP THE database
$cd $ORACLE_HOME/bin/sqlplus '/as sysdba'
sql> shutdown immediate
====================================
FOR Startup
=====================================
start the Repository Listener
$cd $ORACLE_HOME/bin/lsnrctl start LISTENER
start the Database
$cd $ORACLE_HOME/bin/sqlplus '/as sysdba'
sql> startup
start the OMS Service
$cd $ORACLE_HOME/oms10g/opmn/bin/opmnctl startall
start the Management Agent
$cd $ORACLE_HOME/agent10g/bin/emctl start agent
======================================
is this the correct procedure...
can anybody help in this regard....

As an outline, it looks ok I think.
You may need some env variables set up in the script, add some error handling, etc...
I want to stop and start the services...
$cd $ORACLE_HOME/agent10g/bin/emctl stop agent
$cd $ORACLE_HOME/oms10g/opmn/bin/opmnctl stopallRemove the "cd" from your command lines.

Stopping sql server services while applying Service pack On SQL server 2008 and 2008 R2

Hi,
I am planning to apply service pack 3 for SQL 2008 R2 and Service pack 4 for SQL server 2008. This is my first time and I am applying first QA and DEV environment. I have one confusion. In cluster once you fail over sql resources to active node all of the
sql services including SQLSERVER and Agent are automatically stopped in passive node where we apply service pack. But in Stand alone, The services are not automatically stopped. Do I need to manually stop those services like SQLSERVER, Agent, Browser
and others if any before I start applying service pack?
Early Response is highly appreciated.
Thanks In Advance

Hello,
You don’t need to stop SQL Server services. Let SQL Server setup do it as needed.
Please read the following article for the cluster you would like to update:
https://support.microsoft.com/kb/958734?wa=wsignin1.0
The following article may be useful too:
http://www.sqlcoffee.com/Tips0014.htm
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How do starting/stopping of application services differ in R12 ??

How do starting/stopping of application services differ in R12 when compared to 11i ??
Can I start/stop services using opmnctl ??

Can you plese refer me a document where role of OPMN and OC4J in R12 is mentioned ??? In short:-
OPMN - Oracle Process Manager & Notification Server is component in Oracle Application Server (10g) to manage (start/stop/status) Application Server components (HTTP, OC4J)
For more:-
http://download.oracle.com/docs/cd/B14099_19/core.1012/b13996/intro.htm
OC4J -- oracle container for java.
In R12 we have 3 groups of OC4J's.
oacore OC4J - framework based applications
forms OC4J - forms based applications
oafm OC4J - Fusion Middleware - for mapviewer, webservices, ascontrol.
For more, pls read
http://download.oracle.com/docs/cd/B10464_05/web.904/b10326/intro.htm
thanks,
JD

When starting the AMDS it just says "the apple mobile device service on local computer started then stopped. Some services stop automatically if they are not in use by other services or programs."... help?

when trying to fix the ipod syncing/recognition by starting the AMD (apple mobile device) in admin tools section on my computer it came up with the message in the question aboce (the apple mobile device service on local computer started then stopped. Some services stop automatically if they are not in use by other services or programs.)
i have restarted my comp etc and reinstalled itunes... recurrent issue.
note - i wiped my ipod before this issue occurred, does this affect the problem?

I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Next see the the other actions of the following concerning the AMD
iOS: Device not recognized in iTunes for Windows

Start and Stop a Windows Service From Java

Is there any way to start and stop a Windows service from Java? The only post I found on it (http://forum.java.sun.com/thread.jspa?threadID=647509) had a link to one of the many aps that allow Java programs to be services, which is not what I am interested in doing.
I am attempting to get data from performance counters from the Windows Performance Monitor into a Java ap without using JNI. I can get the data from C++ or a .net language pretty easily and was going to create a service that would listen for socket requests and feed back the data. However, I'd like to start and stop that service when my java code starts and stops. Is this possible? Would it make more sense to just use a .exe and Runtime.exec()?

If it's only to start or stop a service then you could use the net command without any need for JNI.import java.io.*;
public class MsWinSvc {
    static final String CMD_START = "cmd /c net start \"";
    static final String CMD_STOP = "cmd /c net stop \"";
    public static int startService(String serviceName) throws Exception {
        return execCmd(CMD_START + serviceName + "\"");
    public static int stopService(String serviceName) throws Exception {
        return execCmd(CMD_STOP + serviceName + "\"");
    static int execCmd(String cmdLine) throws Exception {
        Process process = Runtime.getRuntime().exec(cmdLine);
        StreamPumper outPumper = new StreamPumper(process.getInputStream(), System.out);
        StreamPumper errPumper = new StreamPumper(process.getErrorStream(), System.err);
        outPumper.start();
        errPumper.start();
        process.waitFor();
        outPumper.join();
        errPumper.join();
        return process.exitValue();
    static class StreamPumper extends Thread {
        private InputStream is;
        private PrintStream os;
        public StreamPumper(InputStream is, PrintStream os) {
            this.is = is;
            this.os = os;
        public void run() {
            try {
                BufferedReader br = new BufferedReader(new InputStreamReader(is));
                String line;
                while ((line = br.readLine()) != null)
                    os.println(line);
            catch (Exception e) {
                e.printStackTrace();
}Regards

How do I stop the Runtime Service (UNIX) for a period of time (24 hours)

Greetings
Environment:
OWB Client 10g on Windows XP Professional
Repository - 9.2.0.4 on UNIX (AIX 5.2)
Target schema - 9.2.0.4 on UNIX (AIX 5.2)
I need to stop the Runtime service for 24-48 hours while the database is being upgraded from 9i to 10g. It seems the running service is causing some problems as the database is being started and stopped by the upgrade process (dbma).
What starts the Runtime service at database startup?
How can I prevent it from starting for 24-48 hours?
Anyone else have issues upgrading from 9i to 10g using the migration assistant (dbma)?
I realize I can stop it with the stop_service.sh script but that won't prevent it from satrting by itself when the database is bounced.
I looked at the JOB queues but it doesn't seem to be there as a job that can be controlled with the DBMS_JOB package.
Any help is greatly appreciated.
-gary

Hi and thanks for the responses.
In my case there have been no additions to the server startup script to start the Runtime service, it just starts when the database starts.
As I stated, I am aware of the start_service.sh and stop_service.sh but these don't prevent the service from starting after a reboot of the server or a bounce of the database.
Can anyone tell me how the Runtime service starts?
After a database shutdown and startup I see the Runtime service running as an 'ACTIVE' UNIX process and also one or more Runtime User processes that are 'INACTIVE' but become active when a map is run.
Any help is appreciated.
-gary

Script Start/Stop Oracle Applications Services

Hi
I am constructing some scripts to stop or start some Oracle Applications services (APP, Apache, DB, Construct Manager, discover, forms, etc)
I now that are some script in the folder \viscomn\admin\scripts\, but my questions are, what services must I stop/start first?? The APP?? Then the BD vision?? Then apache?? Or first BD, discover, apache, app, etc?
Please can anyone help on this? Tank you
JailBreak

Hi
Tank you for your reply’s.
Yes i will use the Oracle scripts to stop and start services.
But when the Network Administrator shutdown the server, he must shut down some services, and I will include this scripts in the main script. But my dough was what services will stop first.
The IAS services don’t need to be started?? My IAS service are all stopped and if I start Apache Server Service first, the IAS HTTP Server service don’t start. I must start IAS HTTP Server first, then start apache server. IF not give an error and the service don’t start. But then after the Apache Server will stop by itself.
And some times the Oracle script doesn’t start the Concurrent Manager Service. I must start it manually.
My services that are started are:
Oracle Apache Server
Oracle Fulfiment Server
Oracle Metrics Server
Oracle Metrics Client
Oracle Reports Server
Oracle Concrrent Manager
Oracle Discover Server
Oracle Forms Server
Oracle OracleVIS_db920_RDBMSTNSListenerVIS(from the OracleVIS_db920_RDBMSTNS this is the only service that are started, the others are stopped. Is this correct?)
Oracle OracleVISOra806_2TNSListener80APPS_VIS
This is all the services that are started.
But I have a problem in my discover. When I login to the applications as a user, and pick some options (that will open discover) it gives me one error.
Locator unable to start session altranitsgp.altranit.pt_8000OracleDiscovererSession4. - Hint: An administrator can further diagnose connection problems by running the "checkdiscoverer" script under <ORACLE_HOME>/806/discwb4/util.
But I have started the Discover Server and tested, and all went ok. The problem is in the applications. I don’t know why.
Any one can give a hand on these issues?
Tank in advance.

Stopping exchnage trasnport service

Similar Messages

Maybe you are looking for