Stopping idocs coming into XI production system

Hi Frndz,
We have XI production for the maintenance purpose, we have to stop only the idocs coming into and going out of the SAPXI system.
So how to stop the idocs coming into the system keeping SAPXI system running(other traffic related FILE, JDBC, JMS etc....) ???
<removed by moderator>
Regards
Sai Ganesh
Edited by: Mike Pokraka on Jul 24, 2008 1:17 PM

Hi,
Adding to the Michal post, You can also do
If you dont want to Push the Idocs to XI in future means, In R/3 We20--Change the Port( create dummy file port and assign it)
If u want to post the Idocs to Xi means follow Michal Reply
And also In reverse case while posting the Idocs to R/3, change the RFC Destination name in IDoc Receiver Adapter.The messages will be stay in XI in Errored state
Afterwards if u want to push the Idocs From XI to R/3 means, change the RFC Destination name in Idoc receiver adapter and say Restart.
Regards
Seshagiri

Similar Messages

CX_XMS_SYSERR_PERSIST dump coming in XI production system

hi,
we are having SAP PI 7.0 EHP 1 for NW7.0 with SP level 7. from the last 3 weeks, we are getting too many CX_XMS_SYSERR_PERSIST dumps in our xi prd system. moreover we have seen some lookups not performing ok and giving dummy values if target value is not found even though target value exists. Please suggest what is the cause of this error and how to rectify it.

Hi,
Sometimes this is happening due to database issue.
Check your Short dump thru Tcode- ST22
Also try to activate the cache in IE and CPA cache on the J2ee engine.
t might be the case that XI environment is on a SP that is non compatible.Just chk this issue .
It might be of because of a patch issue. take help of SAP Notes 864542 & 865467.
Apply the SP14 to resolve this issue as this is resolved in that .
Regards,
Rohit

Error message while transporting SapScript to productive system

Hi,
I have tried to transport an order sapscript form (modified Medruck) into the productive system. But I got errors in transaction stms.
The error message is displayed like this:
R3TRFORMZMEDRUCKN was repaired in this system
Message no. TW 104
Diagnosis
Object R3TRFORMZMEDRUCKN is in repair status. Therefore, it cannot be imported.
System Response
The object is not imported.
Procedure
If you still want to import the object, release the relevant repair andrepeat the import.
Does anybody know something about that problem?
Cheers

Hi,
maybe somebody has already create your form in the productive system. Now you would like to create something already created.
Maybe, you have to check in the TADIR table (key R3TR / FORM / name of the form) if the form already exist. What is the system source for the form. (in the PROD)
And finaly, you can go to the SE03, select the first line and execute (to find object R3TR FORM ..) in all the request order. That will show you who has play with this form, and if a request was lost between DEV & PROD. (in the DEV)
Rgd
Frédric
Message was edited by: Frédéric Girod

Importing parameters not available in Production system

Hi Experts,
I am facing an issue after moving my objects into Production system.
I have created a calss and which contains five methods. Each method contains itsown importing parameter. There is one method to send mail, which contains three importing Parameters. I have captured this class and the methods in a TR and basis team moved this TR into production system.
The TR has moved successfully into the production system. But when I checked the Parameters of the class SEND_EMAIL has only one importing parameter insted of three.
Again I created a new TR and captured all the objects related to Class, which contains class definition, methods etc.
I have moved it to quality system successfuly. When I checked in quality i can see the three importing parametrs in SEND_EMAIL method.
This TR has moved to Production successfully. When I checked in production I can see only one importing parameter in SEND_EMAIL method.
But it is showing same active version in Quality and Production.
Please suggest me how can I resolve this issue?
Thanks
Pradeep.

Dear Pradeep
First you check the parameter which u are sending that are already in prd server exist or not
some there are some thing we can see which are available in qua those are not seen in production
see in se06 and try to modify the exact component to modifaible state
check sp pack of qua and prd are one and the same
check kernal rel level in both
check chmod and chown are same in both
Regards

Transporting Iviews from QA/DEV system to production system

Hello All,
I have some iviews that are based on BW report Iview (BEX ). I have them developed in the qa environment. How can I transport the same iview to the production server.
The portal landscape is some thing like this.
We have a devlopment and qa portal , these are accessing the DEV and QA bw systems respectively.
Then we have a production portal server and a production BW server.
Now we have developed some reports in BEX and those are published on the development portal using Web Application Designer.
How can we trasport the same iviews to the production environment? or first of all is it possible to transport the same? We are on EP 5.0 Sp4 and BW 3.5
Thanks in advance
Pradeep Bhojak

Bhojak,
Yes it is possible to do it. Look at export option under System Admin menu. You can export everything as a package and import the same pakage into your Production system.
Good Luck.
GO.

Collective inbound idocs into R/3 system using master_idoc_distribute FM

Hi All,
I want to process inbound idocs (4 idocs collectively) in R/3 using master_idoc_distribute function module. The idoc is coming into system as one idoc having 4 segments (each segment for each idoc and contains sub segments too). I want to call master_idoc_distribute for each idoc for sending it to external system. I am using a custom FM for calling the master_idoc_distribute and assigning it into process code inbound for processing the incoming idoc.
The FM is working for one idoc perfectly but throwing error for more than idocs coming in collectively. Any help is appreciated.
Thanks

use commit work saparately after each function module call

IDOC Message coming from R/3 system to XI , but waits in Qeue

IDOC Message coming from R/3 system to XI , but waits in Qeue
XI doesn't send the message FTP receiver.In XI sxmb_moni the "c" column contains green flags that mean "message scheduled on outbound side".
In smq1 It writes "SYSFAIL" means "Password logon no longer possible - too many faile"
But I use "anonymus" in FTP adapter. Which password is this, which component is related with this error.
How can I do?
thanks

Hi Cemil,
it may be that the FTP server where you want to send your output file does not accept anonymous connections.........so just get the username and password of that FTP server, which has access to do FTP to that machine, for doing ftp to that machine, then your output msg will be FTP to your target FTP server........
Thanks,
Rajeev Gupta

Can i use SWWL to stop a sync send in IP, in production system

hi forum,
in a scenario of mine, theres a BPM and in the BPM there is a sync send to a rfc function module,
after the scenario ran, i can see in the PE, workflow, that the scenario is hanging in the synchronous send step for 3 days 15 hours, and has not yet returned the response....
i could identify the problem ...because in the SXNB_ADM runtime parameter, HTTP_TIMEOUT , the current value is 2700000, which comes out to be some 31 days......
may be due to this the step is still waiting,
how can i stop the process,
can i stop the IP using SWWL, will there be any proble,
coz its in PRODUCTION system......

Hi Sudeep,
if you dont have any correlation: just wait for the 31 days, nothing bad can happen. It is important, to correct the reason, so think about, to reduce the timeout and put an exception branch to the send step, which is stopping the process.
If you have a correlation, other messages can share in the hanging process; in that case you should delete the workitem at SWWL.
Regards,
Udo

IDOCs error in Production System

Hi Gurus,
In Production system, there is a CRM oppertunities process chain is running on hourly basis, the data was updated to DSO successfully, but for the past one week it was not updating to further processing InfoCube, there is an error.
error: Idoc Ready to be transferred to application.
Please update me step by step procedure.
Thanks

Hi,
Check the DataSource in RSA3, if it is working fine and able to see the data in RSA3, there is no problem in DS level, then checl the Mappings and any routines in BW for that DS, if this is also fine then check the below options.
See Dumps in ST22, SM21 also.
Check RFC Connection between ECC and BW systems, i.e. RSA1-->Source System->Right Click on Source system and Check.
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract the data from ECC, so add these profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
Thanks
Reddy

Emails will not stop coming into Inbox. Even when deleted duplicates reappear over and over.

I am trying to find out how to stop this. It happens with all of my mail accounts, not just one.
I have tried deleting the accounts and setting them up again, but I have the same problem.
All of my new mail will load, over and over, this never stops unless i 'take all accounts offline'. I have been unable to check my emails due to the volume of emails coming into my inbox.
Any help would be greatly appreciated, thanks!

What kind of account? IMAP, POP, Gmail?

How can i stop messages from coming into my macbook air

how can i stop messages from coming into my macbook air

Open the Messages app on your MacBook Air. Click Messages > Preferences from the menu bar. Click the "Accounts" tab on top. Uncheck "Enable this account" for each account that is currently enabled.

CRM Survey Responses not coming back into the CRM system - WHY????

Hey guys,
I am trying to implement the campaign automation. My problem now is, that I am not getting the survey responses back into the CRM System so the next campaign element cannot start.
We do not use a BW; and in terms of the .xml for the URL generation I used bsp and not for example mailto. When I tested the URL it worked fine. I as well checked the workflows, they also seem fine. When I created the mailform and inserted the hyperlink I choosed the option no tracking as I said before, we do not use a BW.
Can you tell me if I missed any configuration steps? I also started the internal CatServer, as mentionend in many notes.
I highly appreciate your help.
Best regards,
Janine

Hi,
we are using campaign automation with Surveys and we are able to see responses. Maybe try these steps:
- generate a survey like in Create, run and analyze an E-Mail Campaign with a Survey (Part 1)
- generate the url for your survey and insert it inside a mail form,activating the option "tracking via target site" (since you need to track responses and your survey is on the CRM domain)
-create a simple campaign that sends a mail using your mail form and pass some BP in the target group, then make them answer the survey: under "contact statistics" you should see the number of outbound mails and the number of inbound contacts with the number of BPs that answered to your survey
Once you are sure that this scenario is working, you can set conditions in campaign automation on the type of response received in the survey, etc... (like in http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20283126-36ca-2d10-6983-92ed18d36644?QuickLink=index&overridelayout=true )
Hope this helps,
regards,
laura

PM Delta problem. Notifications coming into lbwq but Orders are not coming.

Hi,
I'm talking about 2 datasources of PM modules. I've problem with one of them only.
1. 2LIS_17_I3HDR(I've problem here)
2. 2LIS_17_I0NOTIF(I've no problem here)
When I create or modify some notification I get the information immediately in lbwq and then I take it to bi system. But when I create some orders or modify some I don't get them in lbwq.
My analysis:
The difference between these two datasources in our server is
1. I've converted 2LIS_17_I3HDR data flow to bi7 i.e. transformations and dtps. I've deleted the update rules and infosources and transfer rules i.e. 3.x objects.
2. I've enhanced 2LIS_17_I3HDR and written some code in cmod or exit to fill the enhanced fields.
I've searched the sdn thoroughly and couldn't find any solution. Please help.
Regards,
Sujit.

Hi All,
I've found solution to my problem. After trying so many methods I found one which solved my problem. The function module PMEX_UPDATE_17_1_QRFC was not active. I activated that and delta records started coming into lbwq.
Now one more question is do I need to activate this function module in Production server also when we go live? What is the exact procedure?
Another doubt is : is there any way to recover the delta records which didn't come to lbwq before the activation of function module. I know I need to delete the setup tables and fill it again. But is there any other way?
Thanks,
Sujit.

Generate Export DataSource from InfoCube In Production System

Software component : BI release 7.0 SP 18
Dear Gurus,
we have a strange situation in our production system from a month till now.
We want to generate an export data source from an infocube to load data into another one but now when we try to generate in prod ( right click on infocube and select "Generate Export DataSource" ) we can't create anymore.
Following message appears :
no changes to repository and cross client customizing object allowed
and the generation is stopped.
We always did it in production system in the same way as in the other system and then transported the update rule or transformation, but now it seems that is no more possible.
No setting has been changhed in SCC4 and in object changeability. Maybe is an authorization problem or is due to any other setting?
Does anybody has a way to solve this problem?
<removed by moderator>!
Kind Regards
Stefano
Edited by: Siegfried Szameitat on Nov 24, 2008 4:18 PM

Hi Stefano,
If you want to generate an export datasource you ask your basis team to open the system so that you can do.
As per the Sap Best Practise you can do the export datasoorce in your development system and move it to the quality and after testing you transport to Production.
Generallly if you can look in to production authorizations you may have only some operation like to display only.SOme times basis may give authorizations like creation of DTP and Infopacks like that.
Regards

Role not displayed in Production system

Dear all,
I have CUA set up (CUA is configured in solution manager), and I assigned 10 roles to a user in solution manager using SU01 and selected Production system while assigning roles and the roles were already existing in production system.but after role assignment to the user, I verified in Production system and I found that they are not reflecting in PROD. Infact, I have done user comparision but still no change.
Please let me know do I need execute SCUL by selecting the User ID.
If yes please let me know the steps to execute SCUL.
Your help is much appreciated!
Many thanks
Anil.

Hi,
Please go to the Transaction SCUL, and give the user id and the system as the prodution system ID (eg. PRD100). By default the Error, Warnings and Unconfirmed Distribution will be already checked. Do not change them and then click on Execute.
If you receive the message saying No Data, then it means that the IDOCs for that user were successfully pushed from CUA to the production system.
But, since the change was not reflected, when you execute, you will be able to see the status where the IDOC is struck. Expand the tree and see the nature of the error, and try to resolve that error. And then select the entire tree and click on the Distribute button.
It will give you a pop up, let all the checkboxes as it is, and continue. After the distribution is triggered, you will get a message in SCUL.
Refresh the SCUL data, and you should be able to see the current status of the distribution.
If all the data is cleared in SCUL, you can log into your produciton system adn check the users roles. New role should be visible there.
I hope this will clear your doubt. Let me know if you have any questions on this.
Regards,
Sneha Vyas.

Stopping idocs coming into XI production system

Similar Messages

Maybe you are looking for