Stopping image distortion on different monitors?

Hi All,
When testing my website on another computer my imported movie
keeps stretching when viewed on a wide screen monitor. How do I
stop this????
Any advice would be much appreciated.

"nat200" <[email protected]> wrote in
message
news:giqbuv$f9v$[email protected]..
> Hi All,
>
> When testing my website on another computer my imported
movie keeps
> stretching when viewed on a wide screen monitor. How do
I stop this????
>
do you have the image/movie's width set to 100% If so, that
is the problem.
Set the width of the item to its actual width.

Similar Messages

When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back. I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor. How do I stop this?

When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back. I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor. How do I stop this?

Does Firefox switch to full screen if you press F11 ?
You can also try the F10 key to see if that brings up the menu bar.
* If the above steps didn't help then see http://kb.mozillazine.org/Corrupt_localstore.rdf
Note: Do not delete localstore.rdf in the program folder (Windows: "C:\Program Files\Mozilla Firefox\defaults\profile\") (Mac: "/Applications/Firefox.app/defaults/profile/")

Lightroom 4.2 - Experiencing problems with images viewed on 2nd monitor

Hi All,
This problem seems to have started with my updating from 4.1 to 4.2. I have my second monitor set as Loupe - Normal and Fit. As I crop an image on my main monitor, the 2nd monitor view does not always change to the cropped view. If I switch to a different photo and then back to the one I just cropped, the 2nd monitor view will then show the cropped image, but it is almost always blurry. Sometimes I can click the image in the 2nd monitor view to change to a 1:1 view and it will look sharp, and then click again back to Fit and then it too will be sharp. Other times I get a message in the 2nd monitor view that says "no image selected" and bouncing back and forth between a different image will correct this.
This all started off with the majority, but not all cropped images showing as blurred and progressed to what I have described above. I seriously though I had a focus problem with my camera!
Is anyone else experinecing this since updating? Suggestions?
Below is the suggested information to provide...
What version of Lightroom? 4.2
Have you installed the recent updates? Yes, 4.2
What operating system? Windows 7 Ultimate 64 bit
What kind(s) of image file(s)? All images are converted to .dng upon import
If you are getting error message(s), what is the full text of the error message(s)? No error messages.
What were you doing when the problem occurred? I am in the develop module cropping images etc.
What other software are you running? Silver Efex Pro 2, but I have had that installed in many prior versions of Lightroom
Tell us about your computer hardware. How much RAM is installed? 32 GB - Yes, I know - overkill...
How much free space is on your system (C:) drive? 119 GB of 223 GB of my solid state drive c:\
Has this ever worked before? Yes
If so, do you recall any changes you made to Lightroom, such as adding Plug-ins, presets, etc.? No other changes other than updating to 4.2
Did you make any changes to your system, such as updating hardware, printers or drivers, or installing/uninstalling any programs? No, no other changes.
Thanks!

Same problem. Not a soloution, but this may be relevant.
http://forums.adobe.com/message/4782916#4782916
Alan

Updating images on a second monitor

I am sending 4 different fringe patterns to a second monitor using a VI whose front panel I've configured to open on that monitor. I'm then using a camera to capture these images. This works reasonably well with the exception that I am limited to updating the image every 200 millisecs before the camera image quality begins to degrade,although not all images are affected int he same way. The resolution on my second monitor is set to 1280 x 720 and the refresh rate is 60Hz. My graphics card is an nVidia K2000 quadro.
Ideally I would like to update the image every 100msecs and still obtain acceptable image quality. Any suggestions as to how I might be able to speed up my image display and capture without image degradation?
Thanks LW
Attachments:
RIM_GetImages.vi ‏23 KB
Fringes.docx ‏601 KB

I'm not sure that I understand your suggestion. I am using the image in the subVI to display my fringe pattern on a second monitor. I don't want to create an image of my subVI front panel or save it anywhere. The for next loop in my subVI displays my sequence of fringe patterns in the image window which is expanded to fill the whole of the monitor. My second monitor is a pattern generator in effect.
There seems to be a limit as to how fast I can update the displayed image before I start to see image corruption from the camera. As of now I'm not sure what the root cause is. It could be that LV takes some time to send the image to the monitor, maybe it's windows not responding in a timely fashion to an instruction to update the image, maybe the it's the camera, the graphics card or the fact I'm using a subVI. Given that computer games must be updating monitors at high frequencies routinely I'm puzzled as to why a monitor update rate greater than once every 200 millisecs should be causing me problems.
Is there a way that LV can write an image directly to a monitor and bypass any delay brintroduced by windows?

Vector image distortion upon resize in Adobe Illustrator CS6

I am experiencing image distortion with vector shapes or outlined letters with scale down. Shift + Alt + Click locks in the proportions of the image as a whole but what happens is individual letters/shapes become distorted resulting in a completely different look. Does anyone know what is wrong?

Am 18.12.2012 um 16:39 schrieb markpstreeter:
but what happens is individual letters/shapes become distorted resulting in a completely different look. Does anyone know what is wrong?
Check if "align to pixel grid" is turned on.

Image Distortion When Printing

Had an ad supplied for a book that was printed digitally. Entire book printed fine except for page with this ad. I got an image drop shadow, but it was way out of position and distorted. Printed claimed it was a bad PDF. All's I did was place a customer-supplied PDF on the page in InDesign, then exported entire book to print-ready PDF. It was fine throughout all proof stages, but when book delivered, I got the strange image distortion. ???
Thanks.

Hi peterpica,
You might try printing this image with a different printer and then check.
What version of Acrobat are you using?
There might be some problem of low resolution from the printer.
So, please check and let me know.
Regards,
Anubha

Running a Front Pannel and SubVI on different monitors when using a DAQ

I have developed a test rig monitoring system. Since there are a large number of transducers and thermocouples I have had to divide the monitoring system into two parts. An air system Front pannel, which is interactive,alloying me to start stop pause the program, and a fuel system SubVI which is purly for displaying information. When the front pannel is opened I would like the SubVI to be displayed as well. I dont mind waiting for it to be called by data being sent to it, but since data will be constantly sent to it I dont want it continnuously called. Basically I want it there running in the back ground so that I can acess it whenever I need it but I dont want it getting in the way. Does this make sense?
Thanks

They will be running on different monitors from the same PC. To allow us to view both at the same time. The problem that I am having right now is that the window is being continuously called through the data, so it will appear and disapear. If i select the close if originally closed option, and I open the subVI originally, then it will stay open for awhile then start to open and close again. I think this a labVIEW softwear issue as it happends at a different time each time I run the program. The other issue is that I need the Front Pannel to be the active Window, but not necesiarily on top.
Hopefully this makes more sense, I can attach the program if you like, but it is pretty large and requires a number of subVI's and the keithley 2700 driver package

Why Does Image Distort When I move the Bones?

http://postimage.org/image/jjcef8ebt/
Hi, I just watched a tutorial where they apply bnes to deform a "bitmap" image. Their image didn't distort like my image. Why is this happening.
I imported an image then I "selected "break apart" and then I added bones to it. When I move the bones it makes the image distort, but in this tutorial here the image doesn't distort. What is wrong?

The tutorial you watched is very simplistic. He doesn't use the bones in a realistic way and skips over the fact that his image isn't actually distorting the way he implies it will.
When you break apart a bitmap on the Stage, you end up with a shape that has its fill set as the bitmap (which is still in the library). When you bend and distort this shape with bones, the effect on the bitmap fill is unpredictable. Note that in the tutorial you cited, the author does not show the bitmap actually distorting in any useful way.
The better way to do this is to select the bitmap instance on stage and then choose Modify > Bitmap > Trace Bitmap. This converts the bitmap instance to a vector drawing. The problem here is that you end up with mulitple shapes of different colors if you have a multi-color image like your dinosour tail. You can add bones to the main green part of the tail, but the yellow parts will not be associated with those bones and so will not move with them. If you are animating the tail in the timeline, you can animate the main part of the tail via the bones and then animate the other parts to compliment that movement by moving those other parts to different layers and animating with normal motion tweens.

Still Image distortion and washed out image quality after exporting

Hi,
I am a relatively new Final Cut Studio 2 user I've taken a few classes and I know the basics and a little beyond. So far my projects have been coming out well until I started having to add still images to my projects. When I add these images I size down in Photoshop CS3 appropriately, usually they are really large tiffs or standard jpegs. Then when I import them into Final Cut I size them one more time to match the wire frame. When I play the movie I created in Final Cut it looks great but after I export it using compressor I either get a pixilated type of image distortion or the images are washed out, but its usually only on certain images not all images in the project are affected. My projects usually end up embedded on our website or up on youtube or bliptv, so I have been bouncing between the H.264 300Kbps for medium bandwidth streaming and H.264 800 Kbps for high bandwidth. Would someone be able to tell me if there is a better codec I should use for the web that would get rid of these problems that I am having or do I need to size my images in a different way? Any tips would be greatly appreciated.
Sincerely,
The Louse~

No help on this

Need help diagnosing cause of printing issue w/ image distortion

Hello, I'm looking for some expert advice for my print issue with image distortion (see above) on my files once setup and proofed by my printer.
I have a large PSD background file out of photoshop (CMYK, 170mb psd) that is being placed into an InDesign document. No preflight errors, all correct SWOP cmyk settings, and I keep having issues where images distort on my printers proofs - they seem unable to explain the issue and can't offer any other suggestions beyond ("just try resaving/uploading again" which of course has an added fee with each upload...).
The files are all fine on our end: on-screen, on our cmyk proofs, and our saved PDFs/packaged files. But everytime our printer opens these they seem to have these distorted image problems - scrambled images (almost as if there was a ghosted transparent image in the distorted area), strange lines (see above, and color distortion (usually greens and pinks, see above).
Is this an issue with my settings/file formats? Maybe the issue lies on our printers end? I'll keep checking this throughout the day and provide quick answers to anyone who can help me get to the bottom of this.
Adobe forums have been a huge help in years past so I decided this was by best bet for a resolution from those who know more than myself (or my printer), thanks for taking the time to help!
- Ian

Hello, I'm looking for some expert advice for my print issue with image distortion (see above) on my files once setup and proofed by my printer.
I have a large PSD background file out of photoshop (CMYK, 170mb psd) that is being placed into an InDesign document. No preflight errors, all correct SWOP cmyk settings, and I keep having issues where images distort on my printers proofs - they seem unable to explain the issue and can't offer any other suggestions beyond ("just try resaving/uploading again" which of course has an added fee with each upload...).
The files are all fine on our end: on-screen, on our cmyk proofs, and our saved PDFs/packaged files. But everytime our printer opens these they seem to have these distorted image problems - scrambled images (almost as if there was a ghosted transparent image in the distorted area), strange lines (see above, and color distortion (usually greens and pinks, see above).
Is this an issue with my settings/file formats? Maybe the issue lies on our printers end? I'll keep checking this throughout the day and provide quick answers to anyone who can help me get to the bottom of this.
Adobe forums have been a huge help in years past so I decided this was by best bet for a resolution from those who know more than myself (or my printer), thanks for taking the time to help!
- Ian

Set front panel size to fit different monitor ( 2 monitors-pattern to 1 monitor-pattern)

Hello, Everybody,
I have here some questions about front panel size.
At first I have create my LabVIEW programs with 2 monitors and run them with 2 monitors, because of this reason I have created a huge front panel with many objects.
But sometimes I will run the program only with 1 monitor, the problem is, the front panel is too big, I can not see the front panel with all objects completely on one monitor! I know, I can scroll aroud it, but I don´t like this way. I would like to set the front panel size automatically to fit the window ( to differenz window sizes or resolutions), how can I do that?
I have tried with "Maintain proportions of window for different monitor resolutions" and "Scale all objects on front panel as the window sizes" to finish that, but they did`t work, I can not see the front panel at once on one monitor;-(
Can you help me?
regards,
Johnny

As noted in the KB article What Is the Difference Between the Options
"Scale All Objects on Panel" and "Maintain Window Proport..., the "Scale All Objects on Panel causes all the objects inside the panel to scale when the panel itself is resized". If the panel isn't resized, the objects arent's scaled. You may also want to read the KB article How Do I Scale All of the Objects of My Front Panel with the Window Size?.

How do I stop images in sequence from being resized by QT

After editing photos and saving them to a file, I've opened them as an image sequence in QT only to find that some of the images have been resized to fit the QT window causing image distortion. I've looked for a setting in QT to maintain image ratio but no luck. Am I missing something? I've resized all of the images so that either the height or the width are the same. Why aren't the images being displayed in QT with a border if they don't fit the window rather than forcing the fit?

An image sequence import must start with identically sized files or the import will be based on the first image dimensions.
If your first image is 640X480 and the next image is 800X600 it will be scaled down to 640X480 at import. You also can't mix portrait and landscape images.
You could use software like Graphic Converter to "batch" export your images to the same scale.
Another method would be to use iPhoto (drag your folder of images to a new album). It can make nice slide show movies and it will "center" smaller images and scale others.

Multi Monitor - different Screeen Saver for different monitor - Setting for notebook computers...

Hi,
I have a question about the multi monitor, screen saver setting for Windows 7. I'd like to know 2 questions.
1.) if I can set different screen saver settings on different monitors
2.) If I can do it, can I work on the external (or non-primay) monitor, when I have the primary monitor with "blank" screen saver?
Basically, I put my notebook computer at the docking station at work, and the docking station is connected to a 22" monitor, desktop keyboard and mouse. So, at work, the 22" monitor and K/B would be my primary use. However, I still "flip"
open the notebook monitor for dual monitor use.
I'd like to "save" the notebook monitor when I don't use it for 30 min. or so... I'd like to "power" it off or set it so that it would only turn on if I move my mouse to that screen.
Is there a way to do it?
Thanks

Hi
There isn't any way to do what you are describing.
The reason is that both monitors have the same source for the video. You can extend the video to the second monitor, but this just gives you more screen space.
The screen saver will only display on the monitor that is set as the default and when the screen saver starts, the other monitor will be blank.
Hope this helps.
Thank You for using Windows 7
Ronnie Vernon MVP

3 front panels on 3 different monitors

Hey all
I was browsing the web and the developers forum but nothing seemed to help me with this problem. I have three front panels I need to run. I have a control room .vi (which is still in the works) a fire tech subVI and a viewing room subVI. I need to show the Fire Tech and Viewing room VI on different monitors.
Now when I say monitor I literally mean like a TV screen. The only computer available in the desired space for testing is in the control room. Therefore I somehow need to get the Fire Tech panel in the fire test area and the Viewing Room panel in the viewing room. Is there a way I can do this without using a web browser? Maybe there is some sort of S-Video I can use or something I can wire from my computer to the other monitors.
Any information would be great. I looked into the web browser thing like I said and due to the confidentiality I don't feel comfortable using it. I'm not sure how remote panels work, but like I said I don't have computer access other than the control room.
Thanks
Tanya
Solved!
Go to Solution.

Hi Tanya,
as there are graphics card available which support up to 6 monitors your 3-monitor request should be possible from the hardware side.
In LabVIEW you can control on which monitor the frontpanel is opened, just look for the "FP Window.Monitor" property of the VI...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Images page in different language

The language on my images pages is different, Czech, I think.
How do I reset to English. Only page effected and is not an issue when using IE.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

Stopping image distortion on different monitors?

Similar Messages

Maybe you are looking for