Stopping on error 12 during DD ACTIVATION during TP import

Hi Experts,
I am trying to import a request suggested by SAP Note 32236, and while doing the import i can add the request to the buffer successfully but getting the following error during tp import.
TSAL-ERP-DEV:devadm 22> tp addtobuffer DEVK074490 DEV pf=/usr/sap/trans/bin/TP_D
OMAIN_DEV.PFL
This is tp version 372.04.36 (release 700, unicode enabled)
Warning: Parameter DBLIBPATH is no longer used.
Addtobuffer successful for DEVK074490
tp finished with return code: 0
meaning:
Everything OK
TSAL-ERP-DEV:devadm 23> tp import DEVK074490 DEV U26 pf=/usr/sap/trans/bin/TP_DO
MAIN_DEV.PFL
This is tp version 372.04.36 (release 700, unicode enabled)
Warning: Parameter DBLIBPATH is no longer used.
ERROR: stopping on error 12 during DD ACTIVATION
stopping on error 12 during DD ACTIVATION
tp returncode summary:
TOOLS: Highest return code of single steps was: 12
WARNS: Highest tp internal warning was: 0118
tp finished with return code: 12
meaning:
A tool used by tp aborted
TSAL-ERP-DEV:devadm 24>
Did i miss something? please suggest a way to solve this problem.
Regards
Karthik D

Are you trying to check in RZ20 --> SAP CCMS Monitor Templates -->
Change & Transport System --> navigate to your domain and system (or first press on Ctrl+F1 "Open alerts")
--> Transports -- >Imports , find your error press on it, and press on "Log overview" button.
find where your error , place cursosr on error and press "Ctrl+f4" (Logs).
P.S. you can navigate to this log from other place, but this one does as he wishes
Regards.

Similar Messages

ERROR: stopping on error 7777 during MAIN IMPORT

Dear Expert,
When i am applying Basis and ABAP Support pack 700-17 levels i am getting following red( In Bold) entries in the action log.
   Import phase 'IMPORT_PROPER' (30.12.2008, 14:56:58)
   Error during executing the tp command 'tp IMPORT all CHE ...'
   tp return code: '0014' , tp message: 'A tool used by tp terminated for unknown reasons' , tp output:
     This is tp version 372.04.36 (release 700, unicode enabled)
     ERROR: stopping on error 7777 during MAIN IMPORT
     stopping on error 7777 during MAIN IMPORT
     tp returncode summary:
     TOOLS: Highest return code of single steps was: 14
     WARNS: Highest tp internal warning was: 0118
     standard output from tp and from tools called by tp:
   Details of the error situation can also be found in the import logs
   Interrupt the import due to an error situation (30.12.2008, 15:11:06)
   Display detailed informations concerning the error in phase 'IMPORT_PROPER'
Abort the import due to an error situation (30.12.2008, 15:12:15)
I have found following Notes from the SAP also applied but still i am facing the same error message
Note 1274493 - Windows: TP/R3trans might terminate with old DB library
Note 998004 - Update the Oracle Instant Client on Windows
Regards
Chandra

Hi,
Have you checked note 1288862? Otherwise I recommend to open a message to SAP.
Cheers

STMS - ERROR: stopping on error 12 during MOVE NAMETABS

Hello,
my STMS suddenly stopped working and is giving following error messages:
This is tp version 372.04.71 (release 701, unicode enabled)
ERROR: stopping on error 12 during MOVE NAMETABS
stopping on error 12 during MOVE NAMETABS
tp returncode summary:
TOOLS: Highest return code of single steps was: 12
WARNS: Highest tp internal warning was: 0118
standard output from tp and from tools called by tp:
Checking logs showed:
2 ETP399 -
DB-COMMIT() -
2 ETP399 -
DB-ROLLBACK() -
2AETP344 dbslerror "26" occured at location "LOC095"    (object "DDXTT")
2 ETP301 -
3 ETP361 "0" Shadow-Nametabs activated, DDL executed
2 ETP362 "6" Shadow-Nametab activations failed
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2010/11/26 18:43:30")
2 ETP363 End : Act. of Shadow-Nametabs with DDL ("2010/11/26 18:43:31")
2 ETP301 -
2 ETP301 -
And
=====================================================================
Update fails (mode flag   to V in DDXTT. Table: /BEV3/CHBPAKNA1S)
Result   /BEV3/CHBPAKNA1S:    Action: CNV      Mode flag: V    Return code: 0
(many entries similar to that).
Any ideas what can be wrong?
Looking forward to any tips!
Regards,
FS

Had to activate manualy objects from DDXTT. Now its working

Transport Issue - ERROR: stopping on error 12 during MOVE NAMETABS

Hi Gurus,
Good day!
Can you someone help me with my transport error.
ERROR: stopping on error 12 during MOVE NAMETABS
Appreciate your help.
Cheers,
Virgilio

Thanks for the reply. Here you go.
START MOVE NAMETABS        <SAPSID>      20090921154118              <sidadm>       20090921154115003083
START tp_getprots         <SAPSID>      20090921154118              <sidadm>       20090921154115003083
ERROR ALL                  <SAPSID> 0012 20090921154253              <sidadm>     20090921154115003083
STOP tp_getprots          <SAPSID>      20090921154253              <sidadm>       20090921154115003083
STOP MOVE NAMETABS        <SAPSID>      20090921154253              <sidadm>   20090921154115003083
ERROR: stopping on error 12 during MOVE NAMETABS
Edited by: Virgilio Padios on Sep 21, 2009 9:52 AM

Length error occurred during in IMPORT statement

Dear Friends,
(length error occurred during in IMPORT statement),when im using the SUBMIT syntax..can i know what is the reason.
Thanks
Rajkumar.A

Hello,
I would like to know how did you solve the issue as i came across the same issue.
Thanks,
FBK

The import was stopped, an error occurred during the phase DDIC_ACTIVATION

Dear all,
When I import the SAP_BASIS support package SAPKB70019 , it appears the error as below :
The import was stopped, since an error occurred during the phase
DDIC_ACTIVATION, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
     -   Error in phase: DDIC_ACTIVATION
     -   Reason for error: TP_STEP_FAILURE
     -   Return code: 0008
     -   Error message: OCS Package SAPKB70019, tp step A, return code
         0008
Notes on phase DDIC_ACTIVATION
In this phase the imported Dictionary objects are activated. This phase
can terminate due to the following reasons:
o   TP_INTERFACE_FAILURE: The tp interface could not be called.
o   TP_FAILURE: The program tp could not be executed. For more
     information, see the SLOG or ALOG log file.
o   TP_STEP_FAILURE: The tp step DDIC activation could not be performed
     successfully. To see the cause of the error in the activation log,
     choose Goto -> Log -> Queue.
     If you import two or more Support Packages in one queue, and you do
     not activate them in the correct sequence, activation errors may
     occur. In this case, the activation errors disappear when you repeat
     the activation run. To do this, choose Support Package -> Import
     Support Package Queue.
    A prerequisite of the Support Package Manager is that the Change and
    Transport System (CTS) is configured correctly. For more detailed
    information, read the online documentation available from Help -> SAP
    Library -> mySAP Technology Components -> SAP Web Application Server ->
    Change and Transport System .
    A list of the most important SAP Notes for Online Correction Support
    (OCS) is available in SAP Note 97620, which is updated regularly.
I have used se11 to avtive the domain SEFS_CRAWL_ALGORITHM , but the error still exist.
Hope anyone can help. Thanks!
B.R
Michael

P762713 wrote:>
> Hi ,
>
>     This is general issue now a days occuring in Support Packs .The only solution for this issue is to delete structure ::
>
> these were the structure deleted from system afterwards patches were installed successfully.
>
> /1PYXXFO/SAP_PAYSLIP_____L0001
> /1PYXXFO/SAP_PAYSLIP_____T0001
> /1PYXXFO/SAP_PAYSLIP
>
> /1PYXXFO/SAP_PAYSLIP_____L0020
> /1PYXXFO/SAP_PAYSLIP_____T0020
>
> You can do this via Tcode se11 .give these info in data type & in turn you have to delete 1PYXXFO/SAP_PAYSLIP also.This has solved my issue & after this support pack went fine.
>
> Thanks..
> Mohit
>
> Edited by: mohit gupta on Sep 23, 2009 9:15 AM
Hi, mohit
      I have tried to use the t-code se11 to delete the structures, but the system telled me that they are all not exist .
A part of the queue log as below:
   Field name KEY is reserved (Do not use structure as include in DB table)
   Field name PRIOR is reserved (Do not use structure as include in DB table)
   Field KEY: Component type or domain used not active or does not exist
   Exactly one field SPRAS of type LANG: Selection as text language possible
Nametab for table /1PYXXFO/SAP_PAYSLIP_____L0001 cannot be generated
   Enhancement category for table missing
   Enhancement category for include or subtype missing
   Field name KEY is reserved (Do not use structure as include in DB table)
   Field name PRIOR is reserved (Do not use structure as include in DB table)
   Field KEY: Component type or domain used not active or does not exist
   Nametab for table /1PYXXFO/SAP_PAYSLIP_____L0020 cannot be generated
   Enhancement category for table missing
   Enhancement category for include or subtype missing
   Field name KEY is reserved (Do not use structure as include in DB table)
   Field name PRIOR is reserved (Do not use structure as include in DB table)
   Exactly one field SPRAS of type LANG: Selection as text language possible
   Enhancement category for table missing
who can help me ?
thank you very much
BR.
Michael
Edited by: Michael Hong on Sep 23, 2009 12:36 PM

"iTunes has stopped working" error message during syncing

I've downloaded the latest version of iTunes, and just started to download Podcasts. But now I get the error message during syncing....almost everytime. Is there a solution out there or update that I haven't downloaded??

Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

Error messages during XML import of Project Pro 2010 files

Hi folks,
I'm trying to diagnose a couple of sick Project Pro 2010 files loaded from Project Server by saving them locally as XML files and then reimporting (not connected to the server during import). The anomalous behavior exhibited by both files
is that one takes 15 minutes to load from the server, while another takes over 20 minutes. These are not typical load times for this server. In both cases, Project consumes about 25% of the CPU during the load process. There's little network I/O
while this goes on, and when externally linked schedules are loaded to the cache, they load very quickly. Other than the long load times, the schedules appear to be behave normally, except for some very odd print preview behaviors in one of the schedules
that I asked about in a different thread (among other things, the default print preview start date is 17 years after the default finish date, and the finish date is about 11 years before the schedule actually starts).
The questions I'm asking here are about errors I see when I try to import the files exported as XML, and whether they might provide any clues as to what's causing the load time issues.
When attempting to import one of the files saved as XML, a pop-up appears that says, "The actual finish date is before some of the previously entered timephased actual work values. If you continue with this operation, Project will truncate
some of the previously entered timephased actual work values. To continue, click OK..."
When attempting to import the other file saved as XML, I get a series of pop-ups identifying a series of tasks that say, "The timephased edit will cause 'Develop Requirements Review Meeting Mi...' to start before 'Conduct Requirements Review"
finishes. As a result the task link cannot be honored. You can: () Continue. Keep the timephased edit and ignore the link. () Cancel. Ignore the timephased edit. (OK/Cancel/Help)".
Interestingly, both files contain external Project Server predecessor / successor links. In the case of the first file, the XML import just appears to strip those out. In the case of the second file, I get a long series of pop-ups (with
some buggy text inserts) in pairs. The first message in the pair is typically "An import error occurred. The element <PredecessorLink> in the <Task> element with <UID>=611 has invalid data. Verify that the file
name and path are correct, and then try again. (OK)", where the indicated UID varies. The second pop-up in the pair appears to have a buggy text constructor and looks like this, with "[stet]" indicating the apparent buggy text inserts,
"An import error occurred. The element [stet] Verify that the file name and path are correct, and then try again. [stet] in the 309 element with <UID>=7 has invalid data. [stet] ^4 (OK)"
In the second pop-up of the pair, the "xyz element" varies, but the "<UID>=7" reference and "^4" are consistent. In the XML, UID 7 appears to refer to a calendar, a task which includes a number
of entries similar to:
<TimephasedData>
<Type>24</Type>
<UID>7</UID>
<Start>2014-10-03T08:00:00</Start>
<Finish>2014-10-04T08:00:00</Finish>
<Unit>2</Unit>
<Value>PT8H0M0S</Value>
</TimephasedData>
... and to an assignment:
<Assignment>
<UID>7</UID>
<TaskUID>10</TaskUID>
<ResourceUID>-65535</ResourceUID>
<PercentWorkComplete>100</PercentWorkComplete>
which includes blocks like:
<TimephasedData>
<Type>2</Type>
<UID>7</UID>
<Start>2014-10-17T08:00:00</Start>
<Finish>2014-10-17T17:00:00</Finish>
<Unit>2</Unit>
<Value>PT8H0M0S</Value>
</TimephasedData>
Eventually, the second file also does load with no external file links indicated.
Again, I'm just looking for anything that might be a clue to the long Project Server load times.
Thanks in advance,
LP

Slow performance can come from a number of different things. Without knowing more detailed information about your setup or workflow, it's difficult to accurately troubleshoot.
-What kind of Mac are you using?
-What is your source format?
-Where is your source footage located?

Error occurred during solution import in CRM 2013

Hi,
Error occurred during import the solution in CRM 2013. before export the solution I changed the Publisher Name then export the solution. When I import the solution on another server error occurred.

Have you done any manual edit of Solution XML?
Can you share error logs and server traces if available?

Length error occurred during the IMPORT statement.

i have problem in Zprogram.its working fine in 4.6b ,but its problem in ECC5.0.its giving dump and saying
Error analysis
   An exception occurred. This exception will be dealt with in more detail
below. The exception, assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was
not caught, which led to a runtime error. The reason for this exception is:
The system found when importing that the target object was longer or
shorter than the object to be imported.

Hi Madhu,
Suggested to post this in logistics forum for better answer.
Software Logistics
Regards,
Debasis.

Error Occurred During the import

Hi friends,
When i tried to import the sql file of my already build apex application into my work space, and at the time of installation it is returning error like
Error     ERR-1029 Unable to store session info. session=1798024046224326 item=40006855470898
ORA-02091: transaction rolled back ORA-02291: integrity constraint (APEX_040100.WWV_FLOW_PAGE_DA_A_AR_FK) violated - parent key not found
OK     Suppose, if i tried to import that same application via back-end through Sql developer means then too im facing the same error like
Error starting at line 231,323 in command:
commit
Error report:
SQL Error: ORA-02091: transaction rolled back
ORA-02291: integrity constraint (APEX_040100.WWV_FLOW_PAGE_DA_A_AR_FK) violated - parent key not found
02091. 00000 - "transaction rolled back"
*Cause:    Also see error 2092. If the transaction is aborted at a remote
           site then you will only see 2091; if aborted at host then you will
           see 2092 and 2091.
*Action:   Add rollback segment and retry the transaction.
RollbackI dont know the reason behind this problem and what could be the problem. Because of that i couldn't import the application to my work space successfully.
Brgds,
Mini

Hi Mini,
Sorry you've hit this also. As described in Jitendra's linked thread and threads linked from that thread, this is caused by an inconsistent metadata state that can occur in dynamic actions in any version prior to 4.1.1. This was tracked with oracle bug ##1344144, and was fixed in 4.1.1, such that the inconsistent metadata state can no longer occur and that existing inconsistencies are corrected on upgrading or importing to 4.1.1.
Were you able to resolve this as outlined in the linked thread, identifying the problematic DA's and resetting the affected element? Also, are you be able to import the application on apex.oracle.com (4.1.1) successfully?
Regards,
Anthony.

Error occurred during the phase IMPORT_PROPER

Hi All,
We are currently installing Add-on ST-PI Rel.2008_1_620 SAPKITLRBA, and the corresponding 3 support packages SAPKITLRB1 to SAPKITLRB3, in one of the quality systems. However, an error is encountered during the installation which is as follows:
The installation was stopped, since an error occurred during the phase
IMPORT_PROPER, which the Add-On Installation Tool is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Continue in the queue display.
The following details help you to analyze the problem:
    -   Error in phase: IMPORT_PROPER
    -   Reason for error: TP_BUFFER_INCONSISTENCY
    -   Return code: 0008
    -   Error message: Pkgs. in queue don"t exist in the tp buffer (e.g.
        SAPKITLRBA)
Also, below is the SLOG of the system:
ERROR SAPKITLRBA ST6 I 0016 20110602203832 STPIUSER INUP
cpafisr5 20110602203531
STOP MAIN IMPORT ST6 I 20110602203833 INUP
cpafisr5 20110602203531
ERROR: stopping on error 16 during MAIN IMPORT
STOP imp all ST6 0016 20110602203833 INUP
cpafisr5 20110602203531
START MAIN IMPORT ST6 I 20110602203943 INUP
cpafisr5 20110602203943
START TRANSMIT BUFFER ENTR ST6 g 20110602204020 INUP
cpafist0
STOP TRANSMIT BUFFER ENTR ST6 g 0000 20110602204020 INUP
cpafist0
START COMMIT BUFFER ENTRIE ST6 g 20110602204020 INUP
cpafisk0
HALT 20110602204020
ERROR: tpsettainfo: Cofile /usr/sap/trans/cofiles/KMARK.SYN does not
exist!
ERROR: EXIT(16) -> process ID is: 10932
WARNING: TA SAPKITLRB1 not found via index, reading whole buffer
The same add-on and support packages we successfully installed in its respective developement system and in other systems as well. However, request you all to kindly assist in resolving the error.
Thanks in advance.
Regards,
Indraneel Upponi

ERROR: tpsettainfo: Cofile /usr/sap/trans/cofiles/KMARK.SYN does not exist!
Does this file exist on this location ? It seems buffer insoncistency from the error message.
Regards,
Subhash

Adobe Premiere CC"has stopped working error"

Ran an update on Adobe Premiere CC last night. Now this error occurs. I did a system restore to 1 hour before the update. Adobe worked fine this morning. After I closed the program and logged in tonight the "has stopped working error" displays. Also Adobe will not import and .MOV files and the .MOV files that are already on the timeline are no longer there. Any help would be appreciated thanks.

I have just had the same thing happen to me too. Everything has been working fine but today, Premiere has crashed/stopped working twice. I have managed to get back into it now, but it won't playback either the Source or Program Monitors, saying there is a 'Low-level exception in Adobe Player (Player)'.

My IMessage has stopped working as every time I try to sign in it says 'An error occurred during activation'. How do you fix this?

My IMessage has stopped working as every time I try to sign in it says 'An error occurred during activation'. How do you fix this?

Hi,
Have you activated messages on your settings page?
HW

IMessage and FaceTime just stopped working. Everytime I try to sign in it says 'An error occurred during activation. Try again' . Any fix?

iMessage and FaceTime just stopped working. Everytime I try to sign in it says 'An error occurred during activation. Try again' . Any fix?

You can try here:
Can't Activate FaceTime
However, I suspect an Apple server problem. Many users have been reporting problems with Messages and Facetime today.

Stopping on error 12 during DD ACTIVATION during TP import

Similar Messages

Maybe you are looking for