Stopping, Refreshing deployments, Re-starting managed server from cmd line

I'm trying to put together an automatic redeployment batch script that will basically stop my managed weblogic 9 server, delete the deployed on the file system, move new ones in there (with the same names and structure), tell weblogic to refresh and pickup the changes, and restart it.
Does anyone have a script that can do this or something similar?

Jared Blitz <> wrote:
I'm trying to put together an automatic redeployment batch script that
will basically stop my managed weblogic 9 server, delete the deployed on
the file system, move new ones in there (with the same names and
structure), tell weblogic to refresh and pickup the changes, and restart
it.
Does anyone have a script that can do this or something similar?Which operating system?
Bart
Schelstraete Bart
[email protected]
http://www.schelstraete.org

Similar Messages

  • Error starting managment server from command line

    I tried to start the managment server from the command line like this:
    <jvm_home>/bin/jrcmd <pid start_management_server
    and I'm getting the following error:
    <pid> Not enough storage is available to run this command
    The system has plenty or resources. I'm unsure what storate the command refers too.
    The pid was found by using tasklist /svc at the command line to find the pid matching the domain service name.
    this is jrockit 1.42_13

    What operating system are you on? What is the complete version of JRockit ("java -version" will tell)?
    Regards,
    /Staffan

  • Error start managed server from admin console in SSL mode

    I have configured Admin server, managed servers and node manager on the same physical server and commonly using a single SSL sertificate.
    There is no problem to start node manager, admin server and managed server individually. But if I try to start managed server from the admin console then I am getting the following errors.
    <Feb 22, 2005 11:02:26 AM CST> <Info> <[email protected]:6666> <Starting Server peoplesoft::PIA1 ...>
    <Feb 22, 2005 11:02:26 AM CST> <Info> <NodeManager@xxxxxxxxxx:6666> <BaseProcessControl: saving process id of Weblogic Managed server 'PIA1', pid: 285390>
    <Feb 22, 2005 11:02:35 AM CST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Classic VM Version 1.4.1 from IBM Corporation>
    <Feb 22, 2005 11:02:36 AM CST> <Info> <Management> <BEA-141140> <The managed server is going to contact the admin server at http://xxxxxxxx:admin_server_portnumber to check if there exists a running admin server at this URL.>
    <Feb 22, 2005 11:02:36 AM CST> <Info> <Configuration Management> <BEA-150017> <This server is being started as a dependent managed server.>
    <Feb 22, 2005 11:02:36 AM CST> <Info> <Management> <BEA-141107> <Version: WebLogic Temporary Patch 8 CR174605 for PeopleSoft 09/09/2004 18:11:35
    WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284
    WebLogic XMLX Module 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 >
    <Feb 22, 2005 11:02:37 AM CST> <Info> <Configuration Management> <BEA-150015> <Connecting to the administration server http://xxxxxxxxx.org:Admin_server_portnumber to retrieve the initial configuration.>
    <Feb 22, 2005 11:02:45 AM CST> <Notice> <Log Management> <BEA-170019> <The server log file /home/xxxx/webserv/peoplesoft/PIA1/PIA1.log is opened. All server side log events will be written to this file.>
    <Feb 22, 2005 11:03:01 AM CST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Feb 22, 2005 11:03:01 AM CST> <Warning> <Security> <BEA-090066> <Problem handling boot identity. The following exception was generated: java.lang.NullPointerException>
    <Feb 22, 2005 11:03:10 AM CST> <Critical> <Security> <BEA-090174> <The trust keystore configuration specified on the command line or in boot.properties does not match the trust keystore configuration specified in config.xml.>
    <Feb 22, 2005 11:03:10 AM CST> <Warning> <NodeManager> <BEA-300038> <The node manager is unable to monitor this server. Could not create an SSL connection to the node manager. Reason : null>
    <Feb 22, 2005 11:03:10 AM CST> <Emergency> <WebLogicServer> <BEA-000342> <Unable to initialize the server: weblogic.management.configuration.ConfigurationException: Due to faulty SSL configuration, this server is unable to establish a connection to the node manager.>
    The WebLogic Server did not start up properly.
    Exception raised: 'weblogic.management.configuration.ConfigurationException: Due to faulty SSL configuration, this server is unable to establish a connection to the node manager.'
    Reason: weblogic.management.configuration.ConfigurationException: Due to faulty SSL configuration, this server is unable to establish a connection to the node manager.
    I am running everything on IBM UNIX server.
    I appriciate your help.
    Thanks & regards,
    Laxman.

    Hi
    From the admin console ... Are you able to check the status of Node Manager ?
    If yes ... please check the SSL configuration of managed servers ...
    Check the domain administration port also.
    Jin

  • How to start managed server from admin server both running

    I have an admin server on one machine and created a managed server on different
    machine, I am not able to start managed server from either machine. When I used
    the admin server machine to start the managed server remotely I got this message
    Connecting to http://fkeita:7001...
    <Jul 17, 2002 11:11:06 AM EDT> <Notice> <Security> <090082> <Security initializi
    ng using realm myrealm.>
    <Jul 17, 2002 11:11:06 AM EDT> <Notice> <WebLogicServer> <000328> <Starting WebL
    ogic Managed Server "managedserver3" for domain "admindomain">
    <Jul 17, 2002 11:11:28 AM EDT> <Emergency> <WebLogicServer> <000350> <Unable to
    create a server socket on Channel Default for: BFINKELMAN/90.0.0.25, port: 8002.
    java.net.BindException: Cannot assign requested address: JVM_Bind Perhaps the
    a
    ddress BFINKELMAN/90.0.0.25 is incorrect or another process is using port 8002.>
    <Jul 17, 2002 11:11:29 AM EDT> <Emergency> <Security> <090085> <Server failed
    to
    bind to any port such that it is not reachable from the console.>
    <Jul 17, 2002 11:11:29 AM EDT> <Emergency> <WebLogicServer> <000342> <Unable to
    initialize the server: Fatal initialization exception>
    When I tried to connect managed server from its machine to admin server (running
    on separate machine ) I got this error
    Starting WebLogic Server...
    Connecting to http://fkeita:7001...
    <Jul 17, 2002 11:15:18 AM EDT> <Notice> <Security> <090082> <Security initializi
    ng using realm myrealm.>
    <Jul 17, 2002 11:15:18 AM EDT> <Critical> <WebLogicServer> <000364> <Server fail
    ed during initialization. Exception:java.lang.SecurityException: Authentication
    for user system denied
    java.lang.SecurityException: Authentication for user system denied
    at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
    SecurityServiceManager.java:978)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
    erviceManager.java:1116)
    at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
    at weblogic.Server.main(Server.java:31)
    >
    <Jul 17, 2002 11:15:18 AM EDT> <Emergency> <WebLogicServer> <000342> <Unable to
    initialize the server: Fatal initialization exception
    Throwable: java.lang.SecurityException: Authentication for user system denied
    java.lang.SecurityException: Authentication for user system denied
    at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
    SecurityServiceManager.java:978)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
    erviceManager.java:1116)
    at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
    at weblogic.Server.main(Server.java:31)
    >
    The WebLogic Server did not start up properly.
    Exception raised:
    java.lang.SecurityException: Authentication for user system denied
    at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
    SecurityServiceManager.java:978)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
    erviceManager.java:1116)
    at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
    at weblogic.Server.main(Server.java:31)
    Reason: Fatal initialization exception
    Throwable: java.lang.SecurityException: Authentication for user system denied
    java.lang.SecurityException: Authentication for user system denied
    at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
    SecurityServiceManager.java:978)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
    erviceManager.java:1116)
    at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
    at weblogic.Server.main(Server.java:31)
    Thanks.

    "fkeita" <[email protected]> wrote in message
    news:[email protected]...
    >
    I have an admin server on one machine and created a managed server ondifferent
    machine, I am not able to start managed server from either machine. When Iused
    the admin server machine to start the managed server remotely I got thismessage
    >
    Connecting to http://fkeita:7001...
    <Jul 17, 2002 11:11:06 AM EDT> <Notice> <Security> <090082> <Securityinitializi
    ng using realm myrealm.>
    <Jul 17, 2002 11:11:06 AM EDT> <Notice> <WebLogicServer> <000328><Starting WebL
    ogic Managed Server "managedserver3" for domain "admindomain">
    <Jul 17, 2002 11:11:28 AM EDT> <Emergency> <WebLogicServer> <000350><Unable to
    create a server socket on Channel Default for: BFINKELMAN/90.0.0.25, port:8002.
    java.net.BindException: Cannot assign requested address: JVM_Bind Perhapsthe
    a
    ddress BFINKELMAN/90.0.0.25 is incorrect or another process is using port8002.>
    >
    Try running netstat to see whether another process is actually running at
    the given address/port.
    Also check using ifconfig/ipconfig or directly checking /etc/hosts file of
    the box to see whether the ips addreses are correct.
    <Jul 17, 2002 11:11:29 AM EDT> <Emergency> <Security> <090085> <Serverfailed
    to
    bind to any port such that it is not reachable from the console.>
    <Jul 17, 2002 11:11:29 AM EDT> <Emergency> <WebLogicServer> <000342><Unable to
    initialize the server: Fatal initialization exception>
    When I tried to connect managed server from its machine to admin server(running
    on separate machine ) I got this error
    Starting WebLogic Server...
    Connecting to http://fkeita:7001...
    <Jul 17, 2002 11:15:18 AM EDT> <Notice> <Security> <090082> <Securityinitializi
    ng using realm myrealm.>
    <Jul 17, 2002 11:15:18 AM EDT> <Critical> <WebLogicServer> <000364><Server fail
    ed during initialization. Exception:java.lang.SecurityException:Authentication
    for user system denied
    java.lang.SecurityException: Authentication for user system denied
    atweblogic.security.service.SecurityServiceManager.doBootAuthorization(
    SecurityServiceManager.java:978)
    atweblogic.security.service.SecurityServiceManager.initialize(SecurityS
    erviceManager.java:1116)
    at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
    at weblogic.Server.main(Server.java:31)
    >Seems to be some issue with security credentials.
    Try running the manageed server directly (as sort of admin) by not passing
    the admin server url and bringing it just like an admin server.
    See if this works. If it works, then soemthing wrong in the way the admin
    server is receiving the request/security credentials from managed server.
    Also make sure both managed and admin servers are on the same patch/service
    pack level.
    -Sabha

  • How to start managed server from admin server both running on separate machines

              I have an admin server on one machine and created a managed server on different
              machine, I am not able to start managed server from either machine. When I used
              the admin server machine to start the managed server remotely I got this message
              Connecting to http://fkeita:7001...
              <Jul 17, 2002 11:11:06 AM EDT> <Notice> <Security> <090082> <Security initializi
              ng using realm myrealm.>
              <Jul 17, 2002 11:11:06 AM EDT> <Notice> <WebLogicServer> <000328> <Starting WebL
              ogic Managed Server "managedserver3" for domain "admindomain">
              <Jul 17, 2002 11:11:28 AM EDT> <Emergency> <WebLogicServer> <000350> <Unable to
              create a server socket on Channel Default for: BFINKELMAN/90.0.0.25, port: 8002.
              java.net.BindException: Cannot assign requested address: JVM_Bind Perhaps the
              a
              ddress BFINKELMAN/90.0.0.25 is incorrect or another process is using port 8002.>
              <Jul 17, 2002 11:11:29 AM EDT> <Emergency> <Security> <090085> <Server failed
              to
              bind to any port such that it is not reachable from the console.>
              <Jul 17, 2002 11:11:29 AM EDT> <Emergency> <WebLogicServer> <000342> <Unable to
              initialize the server: Fatal initialization exception>
              When I tried to connect managed server from its machine to admin server (running
              on separate machine ) I got this error
              Starting WebLogic Server...
              Connecting to http://fkeita:7001...
              <Jul 17, 2002 11:15:18 AM EDT> <Notice> <Security> <090082> <Security initializi
              ng using realm myrealm.>
              <Jul 17, 2002 11:15:18 AM EDT> <Critical> <WebLogicServer> <000364> <Server fail
              ed during initialization. Exception:java.lang.SecurityException: Authentication
              for user system denied
              java.lang.SecurityException: Authentication for user system denied
              at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
              SecurityServiceManager.java:978)
              at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
              erviceManager.java:1116)
              at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
              at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
              at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
              at weblogic.Server.main(Server.java:31)
              >
              <Jul 17, 2002 11:15:18 AM EDT> <Emergency> <WebLogicServer> <000342> <Unable to
              initialize the server: Fatal initialization exception
              Throwable: java.lang.SecurityException: Authentication for user system denied
              java.lang.SecurityException: Authentication for user system denied
              at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
              SecurityServiceManager.java:978)
              at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
              erviceManager.java:1116)
              at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
              at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
              at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
              at weblogic.Server.main(Server.java:31)
              >
              The WebLogic Server did not start up properly.
              Exception raised:
              java.lang.SecurityException: Authentication for user system denied
              at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
              SecurityServiceManager.java:978)
              at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
              erviceManager.java:1116)
              at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
              at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
              at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
              at weblogic.Server.main(Server.java:31)
              Reason: Fatal initialization exception
              Throwable: java.lang.SecurityException: Authentication for user system denied
              java.lang.SecurityException: Authentication for user system denied
              at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
              SecurityServiceManager.java:978)
              at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
              erviceManager.java:1116)
              at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
              at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
              at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
              at weblogic.Server.main(Server.java:31)
              Thanks.
              

              I used startmanagedweblogic managedserver1 http://fkeita:7001 to try to start managed
              server, but it did not work, and got error messages. Error messages are posted
              on my first posting.
              "pankaj" <[email protected]> wrote:
              >Use the startManagedWeblogic.cmd / .sh script to start your
              >Managed/Clustered servers
              >
              >
              >"fkeita" <[email protected]> wrote in message
              >news:[email protected]...
              >>
              >> I have an admin server on one machine and created a managed server
              >on
              >different
              >> machine, I am not able to start managed server from either machine.
              >When I
              >used
              >> the admin server machine to start the managed server remotely I got
              >this
              >message
              >>
              >> Connecting to http://fkeita:7001...
              >> <Jul 17, 2002 11:11:06 AM EDT> <Notice> <Security> <090082> <Security
              >initializi
              >> ng using realm myrealm.>
              >> <Jul 17, 2002 11:11:06 AM EDT> <Notice> <WebLogicServer> <000328>
              ><Starting WebL
              >> ogic Managed Server "managedserver3" for domain "admindomain">
              >> <Jul 17, 2002 11:11:28 AM EDT> <Emergency> <WebLogicServer> <000350>
              ><Unable to
              >> create a server socket on Channel Default for: BFINKELMAN/90.0.0.25,
              >port:
              >8002.
              >> java.net.BindException: Cannot assign requested address: JVM_Bind
              >Perhaps
              >the
              >> a
              >> ddress BFINKELMAN/90.0.0.25 is incorrect or another process is using
              >port
              >8002.>
              >>
              >> <Jul 17, 2002 11:11:29 AM EDT> <Emergency> <Security> <090085> <Server
              >failed
              >> to
              >> bind to any port such that it is not reachable from the console.>
              >> <Jul 17, 2002 11:11:29 AM EDT> <Emergency> <WebLogicServer> <000342>
              ><Unable to
              >> initialize the server: Fatal initialization exception>
              >>
              >> When I tried to connect managed server from its machine to admin server
              >(running
              >> on separate machine ) I got this error
              >>
              >> Starting WebLogic Server...
              >> Connecting to http://fkeita:7001...
              >> <Jul 17, 2002 11:15:18 AM EDT> <Notice> <Security> <090082> <Security
              >initializi
              >> ng using realm myrealm.>
              >> <Jul 17, 2002 11:15:18 AM EDT> <Critical> <WebLogicServer> <000364>
              ><Server fail
              >> ed during initialization. Exception:java.lang.SecurityException:
              >Authentication
              >> for user system denied
              >> java.lang.SecurityException: Authentication for user system denied
              >> at
              >weblogic.security.service.SecurityServiceManager.doBootAuthorization(
              >> SecurityServiceManager.java:978)
              >> at
              >weblogic.security.service.SecurityServiceManager.initialize(SecurityS
              >> erviceManager.java:1116)
              >> at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
              >> at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
              >> at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
              >> at weblogic.Server.main(Server.java:31)
              >> >
              >> <Jul 17, 2002 11:15:18 AM EDT> <Emergency> <WebLogicServer> <000342>
              ><Unable to
              >> initialize the server: Fatal initialization exception
              >> Throwable: java.lang.SecurityException: Authentication for user system
              >denied
              >> java.lang.SecurityException: Authentication for user system denied
              >> at
              >weblogic.security.service.SecurityServiceManager.doBootAuthorization(
              >> SecurityServiceManager.java:978)
              >> at
              >weblogic.security.service.SecurityServiceManager.initialize(SecurityS
              >> erviceManager.java:1116)
              >> at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
              >> at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
              >> at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
              >> at weblogic.Server.main(Server.java:31)
              >> >
              >>
              >***************************************************************************
              >> The WebLogic Server did not start up properly.
              >> Exception raised:
              >> java.lang.SecurityException: Authentication for user system denied
              >> at
              >weblogic.security.service.SecurityServiceManager.doBootAuthorization(
              >> SecurityServiceManager.java:978)
              >> at
              >weblogic.security.service.SecurityServiceManager.initialize(SecurityS
              >> erviceManager.java:1116)
              >> at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
              >> at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
              >> at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
              >> at weblogic.Server.main(Server.java:31)
              >> Reason: Fatal initialization exception
              >> Throwable: java.lang.SecurityException: Authentication for user system
              >denied
              >> java.lang.SecurityException: Authentication for user system denied
              >> at
              >weblogic.security.service.SecurityServiceManager.doBootAuthorization(
              >> SecurityServiceManager.java:978)
              >> at
              >weblogic.security.service.SecurityServiceManager.initialize(SecurityS
              >> erviceManager.java:1116)
              >> at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
              >> at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
              >> at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
              >> at weblogic.Server.main(Server.java:31)
              >>
              >> Thanks.
              >
              >
              

  • Error when trying to start managed server from node manager

    I have a managed server which is authenticated through a WeblogicAuthenticProvider. When starting the managed server from command line I need to setup certain jars in the classpath in order to start it successfully. However when I try and start the managed server from a node manager, I receive the following error.
    Any ideas as to what is going on are appreciated. Is there any way to force Weblogic Node manager to invoke the actual startManagedWeblogic.cmd when bringing up the managed server
    Thanks
    <Jun 5, 2006 9:21:05 AM EDT> <Info> <NodeManager@*.*:5555> <Starting Server TweCluster::TaxwareServer1 ...>
    <Jun 5, 2006 9:21:07 AM EDT> <Info> <NodeManager@*.*:5555> <Server TweCluster::TaxwareServer1 started, process id = 3,012>
    <Jun 5, 2006 9:21:11 AM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA WebLogic JRockit(TM) 1.4.2_05 JVM R24.4.0-1 Version ari-38120-20041118-1131-win-ia32 from BEA Systems, Inc.>
    <Jun 5, 2006 9:21:12 AM EDT> <Info> <Management> <BEA-141140> <The managed server is going to contact the admin server at http://zeus3dev:7001 to check if there exists a running admin server at this URL.>
    <Jun 5, 2006 9:21:12 AM EDT> <Info> <Configuration Management> <BEA-150017> <This server is being started as a dependent managed server.>
    <Jun 5, 2006 9:21:12 AM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
    WebLogic XMLX Module 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647 >
    <Jun 5, 2006 9:21:12 AM EDT> <Info> <Configuration Management> <BEA-150015> <Connecting to the administration server http://zeus3dev:7001 to retrieve the initial configuration.>
    <Jun 5, 2006 9:21:16 AM EDT> <Notice> <Log Management> <BEA-170019> <The server log file E:\bea8.1\weblogic81\common\nodemanager\TaxwareServer1\TaxwareServer1.log is opened. All server side log events will be written to this file.>
    The WebLogic Server did not start up properly.
    java.lang.NoClassDefFoundError: com/taxware/twe/util/crypto/CryptoUtil
    at com.taxware.twe.auth.server.GenericPrincipalValidator.<init>()V(GenericPrincipalValidator.java:41)
    at com.taxware.twe.auth.server.WeblogicPrincipalValidator.<init>()V(WeblogicPrincipalValidator.java:38)
    at com.taxware.twe.auth.server.WeblogicAuthenticationProvider.getPrincipalValidator()Lweblogic.security.spi.PrincipalValidator;(WeblogicAuthenticationProvider.java:188)
    at weblogic.security.service.PrincipalAuthenticator.initialize(Ljava.lang.String;[Lweblogic.management.security.ProviderMBean;)V(PrincipalAuthenticator.java:154)
    at weblogic.security.service.PrincipalAuthenticator.<init>(Ljava.lang.String;[Lweblogic.management.security.ProviderMBean;)V(PrincipalAuthenticator.java:262)
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.doATN(Ljava.lang.String;Lweblogic.management.security.RealmMBean;)Lweblogic.security.service.PrincipalAuthenticator;(SecurityServiceManagerDelegateImpl.java:581)
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(Lweblogic.management.security.RealmMBean;Ljava.util.HashMap;)V(SecurityServiceManagerDelegateImpl.java:420)
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm(Ljava.lang.String;)V(SecurityServiceManagerDelegateImpl.java:700)
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms()V(SecurityServiceManagerDelegateImpl.java:733)
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(Lweblogic.security.acl.internal.AuthenticatedSubject;)V(SecurityServiceManagerDelegateImpl.java:876)
    at weblogic.security.service.SecurityServiceManager.initialize(Lweblogic.security.acl.internal.AuthenticatedSubject;)V(SecurityServiceManager.java:734)
    at weblogic.t3.srvr.T3Srvr.initializeHere()V(T3Srvr.java:822)
    at weblogic.t3.srvr.T3Srvr.initialize()V(T3Srvr.java:670)
    at weblogic.t3.srvr.T3Srvr.run([Ljava.lang.String;)I(T3Srvr.java:344)
    at weblogic.Server.main([Ljava.lang.String;)V(Server.java:32)
    Reason: com/taxware/twe/util/crypto/CryptoUtil                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Found a workaround:
    Manually, add PATH (and probably the other environment variables also) to
    ${WLS_HOME}/common/bin/commEnv.sh.

  • Error: starting remote managed server from command line

    I have enabled SSL on the admin server, and configured/added the managed server
    via my admin server console. However, when I attempt to start the managed server
    via cmd line (script) on the remote machine, I get the following message:
    Starting WebLogic Server ....
    Connecting to http://adminservermachine:7001...
    <Nov 18, 2002 11:42:28 AM EST> <Emergency> <Configuration Management>
    <Errors detected attempting to connect to admin server at wk-gferguson:7001 during
    initialization of managed server ( null:7001 ). The reported error was: < weblogic.security.acl.DefaultUserInfoImpl
    Start server side stack trace:
    java.lang.ClassCastException: weblogic.security.acl.DefaultUserInfoImpl
    at weblogic.kernel.BootServicesImpl.authenticate(BootServicesImpl.java:189)
    at weblogic.kernel.BootServicesImpl.invoke(BootServicesImpl.java:145)
    at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:620)
    at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:581)
    at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:164)
    at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:640)
    at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:454)
    at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:643)
    at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    End server side stack trace
    > This condition generally results when the managed and admin servers are using
    the same listen address and port.>
    <Nov 18, 2002 11:42:28 AM EST> <Emergency> <Server> <Unable to initialize the
    se
    rver: 'Fatal initialization exception
    Throwable: weblogic.management.configuration.ConfigurationException: weblogic.se
    curity.acl.DefaultUserInfoImpl

    This particular log entry looks like your problem:
    <Jan 8, 2010 11:33:30 PM PST> <Error> <Server> <BEA-002606> <Unable to create a server socket for listening on channel "Default". The address 10.249.22.43 might be incorrect or another process is using port 20014: java.net.BindException: Cannot assign requested address.>
    Check using netstat to see if that port is already in use.
    Shared libraries don't need to be on the classpath, they are deployed similar to applications, so I'm confused by your comment about putting them on the classpath. I assume you're using Node Manager to start the server from the AdminConsole, if you want to use a difference classpath either use the StartupScriptEnabled=true in nodemanager.properties OR put the extra classpath entries on the Server Start tab in the console.

  • Starting Managed Server from Administration Console

    Hi
    I am new for SOA and fusion. Can anyone share the brief steps that are needed to start/stop a Managed Server from Admin Console.
    I did a fresh install on RHEL5 and configure a domain. i was able to start the services from script which are created when creating a domain.
    But when i assigned a Managed Server to a Node Manager and try starting the Managed server. It does not start and in the log i can see exceptions like below
    Failed to invoke startup class "JPS Startup Class", java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsStartupClass
    java.lang.ClassNotFoundException
    Failed to invoke startup class "ODL-Startup", java.lang.ClassNotFoundException: oracle.core.ojdl.weblogic.ODLConfiguration
    java.lang.ClassNotFoundException
    I start the services in below order
    Weblogic Server
    node Manager
    and
    soa_server
    Thanks
    Hari

    you must set to true the StartScriptEnabled property in nodemanager.properties

  • How to start managed server from console?

    Hi,
    After several unsuccesful attempts to start a managed server from admin console,
    which starts fine by script and stops by console, can somebody please mail me
    what to enter in the "remote start" tab!
    The documentation is very uncertain if the path have to be absolute or not. It
    seems to be a problem with the classpath.
    thanks in advance
    Kai

    The ServerStart element should look like below (WLS6.1sp1+). Using absolute
    path is definitely OK. Please provide us more info if you still have this
    problem such as files under WL_HOME\NodeManagerLogs\<mgr'ed servername>
    especially config and <mgr'ed server name>_error.log
    <ServerStart Arguments="-mx64m -ms64m" BeaHome="d:\bea"
    ClassPath="d:\bea\load1;d:\bea\load1\lib\weblogic_sp.jar;d:\bea\load1\lib\we
    blogic.jar"
    Name="Server-1005280911753"
    OutputFile="d:\bea\load1\config\NodeManagerClientLogs\managed1\startserver_1
    005280991998.log"
    RootDirectory="d:\bea\load1"
    SecurityPolicyFile="d:/bea/load1/lib/weblogic.policy"/>
    "Kai" <[email protected]> wrote in message news:3bea490f$[email protected]..
    >
    Hi,
    After several unsuccesful attempts to start a managed server from adminconsole,
    which starts fine by script and stops by console, can somebody please mailme
    what to enter in the "remote start" tab!
    The documentation is very uncertain if the path have to be absolute ornot. It
    seems to be a problem with the classpath.
    thanks in advance
    Kai

  • Facing error in starting managed server from nodemanager

    Hi All,
    I have installed WebLogic server 10.3.4 and installed OSB 11.1.1.4.0. I created domain with one admin server and one managed server for osb. When I started managed server with the startManagedWebLogic command it got started successfully but when I am trying tp start the managed server from nodemanager I am getting the following error
    starting weblogic with Java version:
    FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
    [ERROR] aborted
    JRockit aborted: Unknown error (50)
    ERROR: transport error 202: bind failed: Address already in use
    ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
    JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
    Starting WLS with line:
    D:\JDK\JROCKI~1.0\bin\java -jrockit -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms256m -Xmx512m -Dweblogic.Name=osb_server1 -Djava.security.policy=D:\ORACLE~1\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Dweblogic.system.BootIdentityFile=D:\Oracle_OSB\Middleware\user_projects\domains\osb_domain\servers\osb_server1\data\nodemanager\boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false -Xverify:none -da:org.apache.xmlbeans... -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=D:\ORACLE~1\MIDDLE~1\WLSERV~1.3 -Dwls.home=D:\ORACLE~1\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=D:\ORACLE~1\MIDDLE~1\WLSERV~1.3\server -Dcommon.components.home=D:\ORACLE~1\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1 -Djrockit.optfile=D:\ORACLE~1\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\servers\osb_server1 -Doracle.domain.config.dir=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\carml -Digf.arisidstack.home=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1\servers\osb_server1\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=D:\ORACLE~1\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,D:\ORACLE~1\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dem.oracle.home=D:\Oracle_OSB\Middleware\oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=false -Dweblogic.management.server=http://soaspt-app01.scotwat.net:7010 -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\ORACLE~1\MIDDLE~1\patch_wls1034\profiles\default\sysext_manifest_classpath;D:\ORACLE~1\MIDDLE~1\patch_ocp360\profiles\default\sysext_manifest_classpath weblogic.Server
    [WARN ] Use of -Djrockit.optfile is deprecated and discouraged.
    FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
    [ERROR] aborted
    JRockit aborted: Unknown error (50)
    ERROR: transport error 202: bind failed: Address already in use
    ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
    JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
    <11-Mar-2013 13:22:17> <FINEST> <NodeManager> <Waiting for the process to die: 5916>
    <11-Mar-2013 13:22:17> <INFO> <NodeManager> <Server failed during startup so will not be restarted>
    <11-Mar-2013 13:22:17> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
    My nodemanager is started and reachable. The error above says "Address already in use" but I am able to start my managed server through startManagedWebLogic.cmd command.
    Can anyone please tell me what could be the issue. It is really urgent. Please help!!

    Hi Roshni,
    It is likely that a configuration is missing or not set properly in the Node Manager properties file (nodemanager.properties) since the managed server can be started up using startManagedWebLogic.cmd but not with Node Manager. I would complete the following steps to fix the problem:
    1. Go to %WLS_HOME%\common\nodemanager and open up nodemanager.properties (Make a backup of the file first). NOTE: WLS_HOME is your WebLogic Server home.
    2. Look for the parameters "StartScriptEnabled" and "StopScriptEnabled". They should be set to true. If not, please set them to true.
    3. Save and close the file.
    4. Restart the Node Manager
    If you are still unable to start the manager server using Node Manager, you may need to update the DEBUG_PORT parameter in setDomainEnv.cmd located in %MIDDLEWARE_HOME%\user_projects\domains\%DOMAIN_HOME%\bin (always make a backup before changing a configuration file). You may refer to Oracle Support note 1272642.1 for more information about the nodemanager.properties file and how to configure the DEBUG_PORT parameter in setDomainEnv.cmd if needed.
    Thanks,
    Scott (PITSS)
    http://pitss.com/us

  • Not able to start managed server from command prompt

    Hi,
    I am trying to start manged server from command prompt. The command i am using is as follows:
    startManagedWebLogic.cmd MS1 [http://]&lt;Listen_Address&gt;:&lt;Admin_port&gt;
    Where MS1 is the name of my managed server.
    But i am getting following exceptions:
    There are 1 nested errors:
    weblogic.management.ManagementException: Unable to obtain lock on C:\bea\user_pr
    ojects\domains\PB530Domain\servers\AdminServer\tmp\AdminServer.lok. Server may a
    lready be running
    at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.ja
    va:159)
    at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.ja
    va:58)
    at weblogic.management.internal.DomainDirectoryService.start(DomainDirec
    toryService.java:73)
    at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesMan
    ager.java:459)
    at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServ
    icesManager.java:164)
    at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:711)
    at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:482)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:440)
    at weblogic.Server.main(Server.java:67)
    >
    <Feb 10, 2009 6:48:16 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
    te changed to FAILED>
    <Feb 10, 2009 6:48:16 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical
    service failed. The server will shut itself down>
    <Feb 10, 2009 6:48:16 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
    te changed to FORCE_SHUTTING_DOWN>
    Please help me to resolve this issue.
    thanks,
    Sonal
    Edited by: [email protected] on Feb 10, 2009 5:16 AM

    Looking at your error message a little closer, I don't believe it has anything to do with port conflicts but rather that even though you are executing the startManagedWeblogic.cmd with your managed server name (MS1), the error indicates that it is trying to start the Admin Server (not MS1). Note in your error message the following: Unable to obtain lock on C:\bea\user_pr
    ojects\domains\PB530Domain\servers\AdminServer\tmp\AdminServer.lok. Server may a
    lready be running
    It is saying that it cannot start the Admin Server because it is already running (which is probably true in your case). Have you made any changes to the startManagedWeblogic.cmd or the startWeblogic.cmd scripts? I would start debugging there and try to figure out why the script is trying to start your admin server instead of MS1 as you requested on the cmd line.

  • Problems starting managed server from admin console WL70 portal

    I get the following exception when I try to start the managed server from admin server console. Both Admin server and managed server are on the same machine.
              

    I get the following exception when I try to start the managed server from admin server console. Both Admin server and managed server are on the same machine.
              

  • Start managed server from console?

    If I try to start a new weblogic 10.3 managed server from the console then i get this error:
    "The server myserver does not have a machine associated with it.
    All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager or you are not authorized to perform the action requested. No action will be performed."
    Starting the same managed server from the dos prompt "bin/startManagedServer.bat myserver" works, so why is the weblogic console not working?

    Hi,
    To start any managed servers from Admin Console you need to have a Machine associated with that Managed server and have to start nodemanager, then only you can start a managed server from console.
    Following are the steps:
    1) Create a Managed Server (MS-1)
    2) Create a Machines (MachineA)
    3) In the above created MachineA add the MS-1 which can be done from the below console path
    Console Path:
    Machines --> MachineA --> Configuration [Tab] --> Servers [Sub-Tab]
    4) Now start nodemanager using the startNodeManager.sh script which can be found in the below path
    Path:
    wlserver_10.3/server/bin/
    5) Now you can try to start your MS-1 using the Admin Console.
    Note: If you still cannot start the your managed servers then would suggest you to have a look at the below post
    Topic: NodeManager is not reachable
    http://middlewaremagic.com/weblogic/?p=5205
    Topic: Common NodeManager Issues in WebLogic
    http://middlewaremagic.com/weblogic/?p=2887
    Regards,
    Ravish Mody

  • Can i start managed server from another UNIX BOX ..

              Hello,
              I have created Admin Server on 1 UNIX Box & Managed SErver on 2nd UNIX Box. After
              starting ADMIN server on one UNIX Box, i wanted to start managed server using
              same script.I can manually login to 2nd unix box & start managed server. I am
              wondering if i can start using startup script from 1st UNIX Server.
              Thanks
              

    You have to run the startup script from the machine where you want to start the server
              for now. Also the script has to be different for admin and managed server as the init
              arguments to java commands are different.
              We have plans in future to start managed servers from admin servers itself.
              Viresh Garg
              Principal Developer Relations Engineer
              BEA Systems
              Wlstech wrote:
              > Hello,
              >
              > I have created Admin Server on 1 UNIX Box & Managed SErver on 2nd UNIX Box. After
              > starting ADMIN server on one UNIX Box, i wanted to start managed server using
              > same script.I can manually login to 2nd unix box & start managed server. I am
              > wondering if i can start using startup script from 1st UNIX Server.
              >
              > Thanks
              

  • How to start sql server from cmd

    
     i am starting sql server from command prompt but i get error message as under :
    2014-04-04 23:41:55.90 Server      Error: 17058, Severity: 16, State: 1.
    2014-04-04 23:41:55.90 Server      initerrlog: Could not open error log file ''.
     Operating system error = 3(failed to retrieve text for this error. Reason: 1510
    5).
    2014-04-04 23:41:56.21 Server      Error: 17058, Severity: 16, State: 1.
    2014-04-04 23:41:56.21 Server      initerrlog: Could not open error log file ''.
     Operating system error = 3(failed to retrieve text for this error. Reason: 1510
    5).
    2014-04-04 23:41:56.50 Server      Error: 17058, Severity: 16, State: 1.
    2014-04-04 23:41:56.50 Server      initerrlog: Could not open error log file ''.
     Operating system error = 3(failed to retrieve text for this error. Reason: 1510
    5).
    2014-04-04 23:41:56.80 Server      Error: 17058, Severity: 16, State: 1.
    2014-04-04 23:41:56.80 Server      initerrlog: Could not open error log file ''.
     Operating system error = 3(failed to retrieve text for this error. Reason: 1510
    5).
    2014-04-04 23:41:57.10 Server      Error: 17058, Severity: 16, State: 1.
    2014-04-04 23:41:57.10 Server      initerrlog: Could not open error log file ''.
     Operating system error = 3(failed to retrieve text for this error. Reason: 1510
    5).
    2014-04-04 23:41:57.41 Server      Error: 17058, Severity: 16, State: 1.
    2014-04-04 23:41:57.41 Server      initerrlog: Could not open error log file ''.
     Operating system error = 3(failed to retrieve text for this error. Reason: 1510
    5).

    Hi,
    I agree with Erland. You need to verify and specify the correct path for the error log in Startup parameters.
    For example: -eC:\Program Files\Microsoft SQL Server\MSSQL.n\MSSQL\LOG\ERRORLOG
    To configure startup options
    1.In SQL Server Configuration Manager, click SQL Server Services.
    2.In the right pane, right-click SQL Server (<instance_name>), and then click Properties.
    3.On the Startup Parameters tab, in the Specify a startup parameter box, type the parameter, and then click Add.
    For example, to start in single-user mode, type -m in the Specify a startup parameter box and then click Add. (When you restart SQL Server in single-user mode, stop the SQL Server Agent. Otherwise, SQL Server Agent might connect first and prevent you from
    connecting as a second user.)
    4. Click OK.
    5.Restart the Database Engine.
    For more information, please see:
    Configure Server Startup Options (SQL Server Configuration Manager)
    http://technet.microsoft.com/en-us/library/ms345416.aspx
    Database Engine Service Startup Options
    http://technet.microsoft.com/en-us/library/ms190737.aspx
    Thanks.
    Tracy Cai
    TechNet Community Support

Maybe you are looking for

  • "Empty" images in my library

    Having a huge library of both JPGs (and their RAW equivelants -I have my digital SLR set to shoot both RAW and JPG simultaneously) I decided it was time to split up my library into two: a JPG-only library for normal use, and a separate RAW library fo

  • Cover Flow w/ Individual Tracks

    I have a number of singles in my library with no album info listed. When I view in grid or cover flow, each individual track shows up with the generic iTunes icon as cover art. Is there a way to either: a) consolidate all the singles for each artist

  • Joining Issue

    Hi , I have 4 tables , Locations , Countries , Regions , Employees . In which EMPLOYEES is the fact table , and in physical i have joined them ...... Countries----->Regions------>Locations------>Employees Countries(Dimension) is not directly joined t

  • JCABindingException when running published PL/SQL stored procedure on OSB

    Hi, JDEV 10.1.3.4 OSB 10.3.1 I have published a simple PL/SQL function on OSB. FUNCTION pubProc(pinput XMLTYPE) RETURN XMLTYPE. I used DBAdapter wsdls,jca created by JDEV 10.1.3.4. When I test business service with message: <soapenv:Envelope xmlns:so

  • IPhoto Calendar Print command ghosted out in file menu

    I've created a calendar within iPhoto's calendar application but when I try to print to my local printer, the print command is ghosted out in the drop down file menu. All other print functions work fine.