Stopping revovery

Hi
I have a problem where by every time I open Iphoto 09 it says that 2 photos have been found in the iPhoto Library that were not imported. and if i answer yes or no it then asks again and on the third attempt it will then open iphoto. How do i stop this?

QUit iPhoto and go to your pictures folder (the default location of the iPhoto library - or its location if yo have moved it) and right click (control Click) on the iPhoto library and select show package contents - find the folder names Import (or importing) and drag it to the desktop - do not make any other changes
launch iPhoto and you will be fine - open the import(ing) folder and if there are any photos in it that you want drag them onto iPhoto - then trash the import(ing) folder
LN

Similar Messages

HP Pavilion dm4-2070us Sound stop when put the headphone jack

Hi
When I remove or put the headphones jack, the sound stops to work in the speakers and in the headphones. To turn it back, I have to close the player(music, video or sound streamer from the web site) and start it again, but if the headphones is pluged in it works very well, if I remove the jack stop again, it happens in reverse case.
Could you please tell me the solution for this problem?
Notebook info
IDT High Definition Audio CODEC
Genuine Windows 7 Home Premium 64-Bit SP1
Intel(R) Core(TM) i5-2410M
6GB system memory
Thanks
Roberto
This question was solved.
View Solution.

I had the same problem with dm4-2070us and I just finished chatting with HP customer service. The representative asked me to do few things including setting the BIOS to default. I also reinstalled the driver. NOTHING WROKED.
He told me to do a complete revovery of the system to factory reset. I didn't want to go that route.
What I did is downloaded the older driver for dm4-1162us and installed on my dm4-2070 and it fixed the problem. Now the only thing I'm missing is the Dolby sound, about which I don't care that much.
Hope this help you also.
Conclusion: It's a software problem. May HP come uo with a new driver to fix it, SOON.
Thanks.

IPhone got half way through ios6 update and stopped working...

I was half through updating my iPhone when it suddenly stopped and then keeps putting it itself into revovery mode, turning itself off and every so often a yellow screen appears. Help!!

I would perform a DFU Mode Restore of iPhone on computer with iTunes.
Here are the steps. Open iTunes on computer. Connect iPhone to computer with USB Cable. Hold both home and power buttons for exactly 10 seconds, release the power button, keep holding the home button until iTunes recognizes iPhone in Recovery Mode. Usually about 20 seconds of holding home button. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes. DFU Mode is sometimes difficult to get. So keep trying the steps until you get it. DFU mode is iTunes saying iPhone in Recovery Mode except screen is black, blank.

HT204053 I have multiple family members using one apple id account and all of each others information is going onto each others phones/how do i stop this?

I have multiple family members using one apple id and all of our data is going onto each others phones/how do i stop this?

Each person needs to have their own separate Apple ID along with their own separate computer user account and iTunes Library.

TS3989 My 5th gen ipod touch was stolen. I removed the device from my iTunes account, but their pictures still show up on the photostream on the one I purchased to replace it. How do I get this to stop, the cops have no interest in their faces, nor do I

My 5th gen iPod touh was stolen a month ago. I immediately removed that device from my account and yet today I looked at my photostream and there are tons of pics of these people on my photostream. How do I get this to stop?!?

Change your iCloud ID password: http://support.apple.com/kb/HT5624. After doing so, go to Settings>iCloud, tap Delete Account, then sign back in with the new password.

Need help with Sharepoint foundation web application stuck on "STOPPING" error job-service-instance-GUID Number already exists

Hi All,
I cant get to stop SharePoint foundation web app service. Its stuck on status stopping
I have tried the following:
reset IIS
restarted the Timer Service
When I try to use powershell command to stop I get the following error:
Can anyone who went through this help PLEASE
Stop-SPServiceInstance : An object of the type
Microsoft.SharePoint.Administration.SPServiceInstanceJobDefinition named
"job-service-instance-1ff39eb2-12d2-457d-a749-265e350eb1b1" already exists
under the parent Microsoft.SharePoint.Administration.SPTimerService named
"SPTimerV4". Rename your object or delete the existing object.
At line:1 char:127
+ ... pplication"} | Stop-SPServiceInstance
+ ~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (Microsoft.Share...ServiceInstance:
SPCmdletStopServiceInstance) [Stop-SPServiceInstance], SPDuplicateObjectEx
ception
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletStopServ
iceInstance

Hi,
It seems that the issue is in the timer job definition for executing this operation.
My suggestion is to start the service again and delete the job definition from the error and again try to stop it.
This might be helpful:
http://sharepoint.stackexchange.com/questions/22368/is-there-a-powershell-cmdlet-to-delete-a-timer-job
I had a lot of issues in the past when try to stop this instance after the Web apps are provisioned.
As general rule now If I have multi-server Farm topology that has servers that should not serve Web App requests I turn off the service prior to provisioning any Web Apps in the Farm.
BR,
Ivan

IPhone mail app stopped pushing mail

I am having the same problem with all 3 of my mail accounts including my mac mail and gmail. I've tried all of the fixes, resetting the accounts, restarting the phone, etc.. but as of four days ago, it simply stopped pushing email in or out. It looks like it's trying with the spinning wheel at the bottom, but the wheel doesn't appear at the top of the screen so I know it's actually accessing the server. I can still access the Internet and such, so it's not a connection problem.
Please advise.

Try locating and deleting these two preference/plist files:
~(yourUserName)/Library/Preferences/com.apple.mail.plist
~(yourUserName)/Library/Preferences/com.apple.LaunchServices.plist

When i login to my account and it takes me to the desktop, the error sound plays, then the rainbow wheel appears, and finder immediately stops responding

It started yesterday when i was listening to itunes when all of a sudden the music stopped playing and i had to hold down the power button to shut it down and reboot, and then, when i logged back in, the error sound played, and then finder opened up, but the window was grayed out like i had another app selected, bu i didn't, so i tried to open up itunes and the icon started bouncing and then it stopped midbounce and i had to reboot again because finder wasnt responding. now when i log in, the error sound plays, and finder immediately stops working and then i have to reboot again because i cant click anything and i cant properly relaunch finder. please help

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Itunes wont open and recently stop giveing the quit unexepectly meesage.

well one day i was burning song songs off itunes and itunes quit everrytime i tryied to reopen it gave me the quit unexepectedly message. i took a few tips from other post but these did not help. i tunes just stop show in the message. it jumps once like its about to activate but stops and does nothing if there is some one who can help me please do i need new music for my ipod sos please

Thanx alot for all your answers.idid do it on my own

Itunes wont open and gives me a message saying "Itunes has stopped working". What can I do to fix this?

I use windows vista and I have upgraded my itunes. Now when I open it, it gives me a message saying "itunes has stopped working" and then gives me a message saying it will notify me for a solution. What can I do to fix this so it can open and not give me any more problems???

First you can try;
Try restarting PC and run itunes again!
If error again than perform clean instal of itunes (uninstal first and than instal again)!

Each time I try to synch photos from my Windows 7 PC to my iPad2, iTunes stops working, and the error report says Problem Event Name:     APPCRASH   Application Name:     iTunes.exe   Application Version:     10.3.1.55   Application Timestamp:     4deec35

Each time I try to synch photos from my Windows7 PC to my iPad2, iTunes stops working and the error message is:
Problem Event Name:                          APPCRASH
Application Name:                             iTunes.exe
Application Version:                           10.3.1.55
Application Timestamp:                    4deec351
Fault Module Name:                          ntdll.dll
Fault Module Version:                        6.1.7601.17514
Fault Module Timestamp:                 4ce7ba58
Exception Code:                                  c0000005
Exception Offset:                                0002e3fb
OS Version:                                          6.1.7601.2.1.0.768.3
Locale ID:                                             1033
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
I reloaded iTunes 10 (64 bit) successfully, but the problem remains the same.
Any suggestions?

I looked in the folder from which I want to synch photos, but there is no such thing as an "ipod photo cache" in that folder, or sub-folders, as suggested in the link which you were nice enough to provide.
I have also tried removing photos from my iPad2 Photos App, and "iTunes has stopped working" shows up again as soon as I click on the "Synch photos from" button.

Since I installed a printer software Satellite L300 has stopped working

Hello there!
I'm new here so not really sure if I'm posting in the right place. Mods, please feel free to move to the relevant section, thank you.
OK I have a Toshiba Satellite L300 Laptop and ever since I installed a printer software on Wednesday night, my laptop has suddenly stopped working!
Ever since Thursday night, I have been trying to get it working but I'm faced with this message:
when i load it up it goes to Windows error recovery:
'windows has failed to start.a recent hardware or software change might be the cause
if windows files have been damaged or configured incorrectly,startup repair can help diagnose and fix the problem.if power was interrupted during startup,choose start windows normally'
then it gives two options: Launch startup repair (recomended)
start windows normally
==========
-so i click launch startup repair (reccomended)
-then a scren loads up called 'system recovery options'.. it says: select an operating system to repair and click next.only windows vista operating systems are listed and can be repaired
if you do not see your operating system listed, click load drivers to load drivers for your hard disks'.....
but nothing comes up so i click load drivers and it just gives me loads of random folders...and i haven't a clue which ones to load
========
5 years ago Report Abuse
Additional Details
so i just click 'next'
========
then i have 5 options:
-startup repair
-system restore
-windows complete pc restore
-windows memory diagnostic tool
-command prompt
==========
startup repair says it cannot manually fix any problems
-system restore just says your computer is in a limited state and performing this action cannot be changed...but there is no option to do so
-windows comple pc restore says i need to insert a backup disk which I dont have
windows memory diagnostics tool says that windows is preventing this
============
but on the system resotre it tells me to type something like: rstrui.exe /OFFLINE:C:\Windows
but i don't know where...i typed it in the command prompt but don't understand how to use it
=========
i also tried to click start windows normally but it won't work

If the problem is installed software, start notebook in safe mode and try to start system restore from there.
Please let me know which options are available. Can you roll back OS few days back?
Are some restore points listed there?

How do I stop FF from restoring previous session, I've already played with all the options I can find but nothing stops it unless I delete history each time.

Recently, FF has started opening my last tabs when I start a fresh session. I have already checked to make sure that none of the applicable settings are enabled, such as under Options->General: When FF starts "SHOW MY HOMEPAGE" is selected. But for some reason, it opens my last session. The only way I've been able to get it to stop doing this is by having it delete my browsing history after I close the session. I don't want this since I often use my history to re-find information I need for class research. I have made certain that all my settings are the same from before FF started doing this. It only started doing this after the computer was turned off for a long weekend.
I've already searched through the Mozilla help pages and all I can find is how to restore the previous session or similar. I don't want to restore my previous session, I want it to stop restoring my previous session without having to delete my browsing history each time.

Using the instructions here:
http://kb.mozillazine.org/Session_Restore#Disabling_crash_recovery
I was able to turn off that feature entirely without having to create a new profile.

Report generation toolkit and signal express user step : problem of closing reference in "Stop" event

Hi all,
I'm trying to make a package of Vis to easily make Excel reports with Signal Express. I'm working on LabVIEW 8.2.1.
I'm using the report generation toolkit, so I build a .llb from my project which contains all the hierarchy of my steps, but also the hierarchy of dynamic VIs called.
I have made some steps, like "Open Workbook", "Write Data", etc.
My steps run well, excepts one step : "Close Workbook".
If my "Close Workbook" step is firing on "Run" Signal Express event, I have no error, so my reference is properly closed.
But if my "Close Workbook" step is firing on "Stop" Signal Express event, I have an error "1", from "Generate Report Objectrepository.vi".
I feel that I'm trying to use a reference which has been killed in the "Stop" step...
I would like to know what exactly do Signal Express on "Stop" event and why my close function does'nt run well.
Thanks,
Callahan

Hi Callahan,
SignalExpress (SE for short) does the following on the Stop event:
1. Takes the list of parameters that SE found on your VI's connector pane, and sets the values that the user set from the "Run LabVIEW VI" configuration page, if any.
2. Then tells the VI that SE is running the Stop event by setting the Enum found on your VI's front panel. This in turn should produce some boolean values telling your VI to execute the Stop case.
3. The VI is then run, with those values and states.
4. SE checks to see if any errors where returned.
5. Since this is the Stop event, SE releases the reference to the VI which it possesses.
Questions for you would be, is the reference to your Workbook linked to a control on your connector pane, or held in a uninitialized Shift Register. If it's held in a Shift Register, SE would not be aware of it, and would not be able to affect that reference.
Hope that helps. Feel free to post your LLB if it doesn't.
Phil

Stop the report from firing until the user clicks the Go button?

Hi All,
Is there a way to stop the report from firing until the user clicks the Go button? At the moment it is populating when I open the dashboard page. I found something online that said i could use the Page Options>Save Current Settings> For Others.. but even though i am signed in as an administrator i only see a For Me.. option. Also, even after setting this option i would like to be able to hit the 'Go' button to run the report and have it uncollapse the section. Is this possible?
Thanks

Thanks for the replies,
In my report i am trying to constrain the report to todays data only. However the only prompt i have is for another column. If i place a filter on the date column with Year=0000 it will not change with the prompt selection and so will never return any results. Is there any other way?
It seems wasteful to fire a request to the database onload of the page. Is there an option to only fire a request what the prompts are entered? I will be using a stored proc which needs parameters to run the request so it would be good to be able to set the report to not run until it has parameters entered
Thanks

Stopping revovery

Similar Messages

Maybe you are looking for