Stopping scom 2007 & 2012

How to completely stop Stopping scom 2007 & 2012.
thanks
Mike
Regards, Mike ||Persistent Work Triumphs||

Hi,
it seems, putting RMS and MS in maintenance mode is not the best choice, old article from Cameron Fuller (2011, so this should mean: SCOM 2007):
http://www.systemcentercentral.com/so-i-accidentally-put-my-rms-into-maintenance-mode-what-do-i-do-now/
New article on SCOM 2012:
http://windowspowered.wordpress.com/2011/09/09/management-server-maintenance-mode-in-scom-2012/
Excerpt: "The only thing you need to do, is make sure you never put more then 50% of your Management Servers into Maintenance Mode, because this makes your Resource Pool unusable."
HTH, Holger (alias Marvin)
Holger alias InternetSmurf, Munich, Germany

Similar Messages

Can overrides from SCOM 2007 R2 be used in a new SCOM 2012 R2 installation?

Hi All,
I'm wondering if we can "easily" use our overrides/configuration from our current SCOM 2007 R2 implementation and use them in a new SCOM
2012 R2 environment that we plan on standing up. We are using SCOM to monitor approx. 400 servers (physical and virtual).
We have been using 2007 R2 for a few years and we'd like to start using 2012 R2. Instead of using the update path (2007 R2 to 2012
to 2012 SP1 to 2012 R2), we are planning on setting up a new 2012 R2 environment and configuring our servers to start reporting to 2012 R2 (after it has been configured in such a way as to "mimic" our 2007 R2 environment).
Ideally, we'd like to avoid going through the upgrade path. (We'll leave our 2007 R2 environment running so that we can still access "historical
data" until the new 2012 R2 environment has had a chance to build up its own "historical data".)
So ... I was thinking we could export our overrides from 2007 R2 and import them into 2012 R2, but I'd like to verify that this approach makes
sense. We haven't done extensive customizations to 2007 R2 in terms of Distributed Applications or Management Pack Objects (although we have made some changes - which I guess we could manually configure in 2012 R2 to offer the same "experience").
The following are some of the Management Packs that we are using in 2007 R2:
Microsoft Windows Active Directory
Active Directory Certificate Services
EMC Storage Monitoring
IBM Hardware
Microsoft Exchange Server 2010
McAfee
Microsoft Forefront Server Protection 2010
Microsoft Office SharePoint Server 2007
Microsoft SQL Server
Microsoft Windows DNS Server
Microsoft Windows WINS
Microsoft Windows Hyper-V
Microsoft Windows Internet Information Services
Microsoft Windows Server
Microsoft Windows DHCP
NetBackup Operations Manager
Office Communications Server
OpsLogix (BlackBerry)
Service Level Dashboard for OpsMgr 2007 R2
SolarWinds Orion
Schedule Maintenance Mode
Team Foundation Server 2010
Virtual Machine Manager
Microsoft Windows Cluster
Operations Manager 2007 R2
I appreciate all feedback and the sharing of you expertise.
Thanks, Joe.

As long as the base pack works and you wish to retain the customisation then you should be ok, there’s a good article
here which explains how to perform the migration and some of implication/things to check.
There will be complications if you’ve stored anything in the default mp but this is explained in the above article.

Stop SCOM services before installing UR5 for SCOM 2012 SP1?

Hello,
Shall I stop SCOM services on management server before upgrade to UR5?
ENV: 3 SCOM 2012 SP1 management servers without UR.

You didn't need to stop services within upgrade.
To upgrade to UR5, you can refer below link
http://www.ms-opsmgr.eu/?p=488
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical

Scom 2007 and scom 2012 agent multi home

is there version limit for the agent multihom for scom 2007 and scom 2012?
In technet i found it for SCOM upgrade it mentioned need scom 2007 CU4 and above, how about for multihome approach for SCOM agent?
Besides that, instead of agent upgrade, could we perform agent uninstallation scom 2007 and reinstall scom 2012?
Thanks for your advice.

Hi Cylim,
You can upgrade your agents to SCOM 2012 only from SCOM 2007 R2 CU4. Please look at these helpful links:
http://blogs.technet.com/b/kevinholman/archive/2014/01/20/do-i-need-a-specific-cumulative-update-release-ur-in-order-to-upgrade-to-scom-2012-or-2012-sp1-or-2012-r2.aspx
http://blogs.catapultsystems.com/cfuller/archive/2012/05/31/quicktricks-multi-homing-an-agent-to-opsmgr-2012-scom-sysctr.aspx
http://blogs.catapultsystems.com/cfuller/archive/2014/04/02/multihomed-migrations-in-operations-manager-lessons-from-the-field.aspx
As Scott mentioned, you can uninstall SCOM 2007 agent and install SCOM 2012 agent on one or a few servers, and see if they report properly to both management groups SCOM 2007 and SCOM 2012:
http://dynamicdatacenter.wordpress.com/2012/10/15/om-2012-agent-report-to-scom-2007-not-r2-scom-2012/
Natalya

SQL or Powershell query to get the SCOM management group id for SCOM 2007 R2 & 2012 / 2012 R2

Hi All,
Can any one provide me the SQL or Powershell query to get the SCOM management group id for SCOM 2007 R2 & 2012 / 2012 R2
I had a SQL query which will query the data from data warehouse and give the management group id but i have lost it for all 3 above.
Gautam.75801

Hi Gautam,
Hope it helps:
http://blog.tyang.org/2013/03/13/data-aggregation-field-became-empty-in-opsmgr-2007-linked-performance-report/
http://blog.tyang.org/2012/09/05/mp-authoring-targeting-rms-or-ms/
Natalya
### If my post helped you, please take a moment to Vote as Helpful and\or Mark as an Answer

Update agent from SCoM 2007 to SCOM 2012

Expets,
We have SCOM 2007 R2 CU7on 1 server.
we installed another single SCOM 2012 r2 on another server.
when i push the agent from the SCOM 2012 to machine still monitored by SCOM 2007, the machine appear in pending management under device management under setting
tab
but when i remove the SCOM 2007 manualy, there is no problem and the installing of SCOM 2012 agent done successfully
any way to make SCOM 2012 agent automatically without remove SCOM 2007 agent ?
Ahmad Samir | MCSE 2003 | MCTS: Exchange 2010, MCTS: Lync 2010. MCTS: SCOM 2007

Hi,
If SCOM 2012 and SCOM 2007 R2 belong to the same management group, then you are trying to make your agents multi-homing, and if so, just discovery them and push agent to them should work.
Here is a similar thread, please go through it:
http://social.technet.microsoft.com/Forums/en-US/c6d15d7f-1779-47ea-a437-bc6ab00e2f64/upgrading-scom-2007-r2-to-scom-2012?forum=operationsmanagergeneral
And we may need to logon to one agent and check its event viwer for operation manager log for more details.
Regards,
Yan Li
Regards, Yan Li

Import System Center Monitoring Pack for System Center 2012 - Service Manager into SCOM 2007 R2

I would like to know if there is SCSM 2012 SP1 MP available for SCOM 2007 R2 ?
I downloaded the "System Center Monitoring Pack for System Center 2012 - Service Manager" MP from
http://www.microsoft.com/en-us/download/details.aspx?id=29980 and then import into SCOM 2007 R2, however, I found that there are some MP dependencies issue.
For example, the "Microsoft System Center Service Manager Library" MP requires "Microsoft SystemCenter Library" and "System.Health.Library" MPs of version 7.0.8427.0. Howerver, the "Microsoft SystemCenter Library"
and "System.Health.Library" MP in SCOM 2007 R2 is of version 6.1.7221.0

Import Management Pack from DVD disk SCOM 2012 R2
SW_DVD5_Sys_Ctr_2012_R2_English_OpsMgr_MLF_X19-18307.ISO\ManagementPacks
Have a nice day !!!

SCOM 2012 R2 agent with SCOM 2007 R2?

Server: SCOM 2007 R2 (now); eventual upgrade to SCOM 2012 R2
OS to monitor: Windows Server 2012
I understand SCOM 2012 agents can be installed on Windows Server 2012 and report back to SCOM 2007 R2 MGs.
I haven't been able to find documentation for or against whether SCOM 2012 R2 agents can be installed on Windows Server 2012 and can report back to SCOM 2007 R2 MGs... Is this supported?
I can't find anything on any specific CU level that might be required on SCOM 2007 R2 to support this.

Hi,
I have not found any document talking about this. The only thing I can find is SCCM 2012 r2 agent can talk with SCCM 2012 SP1.
Juke Chou
TechNet Community Support

Upgrade from SCOM 2007 R2 to SCOM 2012 R2 on a single server

we are planning to Upgrade from SCOM 2007 R2 to SCOM 2012 R2 on a single server.We are planning to do in place upgrade.

If you looking for a guide, check : http://blogs.4ward.it/how-to-upgrade-to-scom-2012-from-scom-2007-inplace-upgrade/
MS documentation for the upgrade is located at: http://technet.microsoft.com/en-us/library/hh476934.aspx
thx
Pranav

SCOM 2007 R2 to SCOM 2012 Migration\Upgrade

What are the different ways to migrate\Upgrade from scom 2007 r2 to scom 2012 r2 ?

This link lists multiple upgrade paths.
Is this what your looking for?
http://technet.microsoft.com/en-us/library/hh476934.aspx
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

SCOM 2007 R2 to SCOM 2012 SP1 upgrade issues.

We have SCOM 2007 R2 on one of our development Environment.
The plan was to upgrade to SCOM 2012 R2 so we installed the SCOM 2007 R2 CU5.
We are having issues to upgrade now from SCOM 2007 R2 CU5 to SCOM 2012 SP1.
While upgrading we received the below message:
Unable to Proceed
Setup is unable to proceed with installation for the following reason:
At least one of the following application is installed on the computer.Due to incompatibility with system center 2012 - operations manager,these applications must be uninstalled.
-System Center 2012 - operations manager beta
-system center operations manager 2007
-system center operations manager 2007 sp1
--system center operations manager 2007 r2
-system center service manager agent
--system center essentials agent

Hi,
You cannot upgrade from SCOM2007R2 to SCOM2012SP1, you must upgrade to SCOM2012 and the upgrade to SCOM2012SP1
Cameron Fuller has a blog:
http://blogs.catapultsystems.com/cfuller/archive/2013/02/11/can-you-upgrade-from-opsmgr-2007-r2-to-opsmgr-2012-sp1-scom-sysctr.aspx
Upgrading System Center 2012 – Operations Manager to System Center 2012 SP1
http://technet.microsoft.com/en-us/library/jj899854.aspx
"The only supported upgrade path to System Center 2012 Service Pack 1 (SP1), Operations Manager is from System Center 2012 – Operations Manager. If you are upgrading from System Center Operations Manager 2007 R2, you must first upgrade to System Center 2012
– Operations Manager"
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Difference between Scom 2007 and Scom 2012 Gateway server setup.

Hi All,
Greetings!!
I would like to know the differences for gateway server setup in Scom 2007 and 2012 versions..
Are there any changes in the data collection or in the configuration? and also the prerequisites for it.
Please let me know these info..
Regards,
Gokul

There is no great different in settng up gateway server in SCOM 2007 R2 and SCOM 2012. As summary, it requires
1.Request certificates.
2. Import those certificates into the target computers by using the MOMCertImport.exe tool.
3. Distribute the Microsoft.EnterpriseManagement.GatewayApprovalTool.exe to the management server.
4. Run the Microsoft.EnterpriseManagement.GatewayApprovalTool.exe tool to initiate communication between the management server and the gateway
5. Install the gateway server.
However, the prerequisites has different between SCOM 2007 R2 and SCOM 2012
SCOM 2007 R2 gateway server support folloiwng OS
Windows Server 2003 Standard Edition with Service Pack 1 (SP1)
Windows Server 2003 Standard Edition with Service Pack 2 (SP2)
Windows Server 2003 Standard x64 Edition with SP1 or SP2
Windows Server 2003 Enterprise Edition with SP1
Windows Server 2003 Enterprise Edition with SP2
Windows Server 2003 Enterprise x64 Edition with SP1 or SP2
Windows Server 2003 R2 Standard Edition with SP1 or SP2
Windows Server 2003 R2 Standard x64 Edition with SP1 or SP2
Windows Server 2003 R2 Enterprise Edition with SP1 or SP2
Windows Server 2003 R2 Enterprise x64 Edition with SP1 or SP2
Windows Server 2008 Standard 32-Bit with SP1 or SP2
The 64-bit edition of Windows Server 2008 Standard with SP1 or SP2
Windows Server 2008 Enterprise 32-Bit with SP1 or SP2
The 64-bit edition of Windows Server 2008 Enterprise with SP1 or SP2
Windows Server 2008 Datacenter 32-Bit with SP1 or SP2
The 64-bit edition of Windows Server 2008 Datacenter with SP1 or SP2
Windows Server 2008 R2
Windows Server 2008 R2 with SP1
SCOM 2007 R2 gateway server
CPU :2.8 GHz or faster
Memory: 2 GB of RAM or more
available Space: 20 GB of available hard disk space
NET Framework 2.0
Microsoft Core XML Services (MSXML) 6.0
SCOM 2012 Gateway server
Disk space: %SYSTEMDRIVE% requires at least 1024 MB free hard disk space.
Server Operating System: must be Windows Server 2008 R2 SP1, Windows Server 2012, Windows Server 2012 Core Installation or Windows Server® 2012 R2.
Processor Architecture: must be x64.
Windows PowerShell version: Windows PowerShell version 2.0, or Windows PowerShell version 3.0.
Microsoft Core XML Services (MSXML) version: Microsoft Core XML Services 6.0 is required for the management server.
.NET Framework 4 is required if the Gateway server manages UNIX/Linux agents or network devices.
Roger

SQL 2012 DB Engine [Login failed: Account locked out] alerts not received from SCOM 2007 R2

Dear Experts,
In our SCOM 2007 R2 environment SQL 2012 DB Engine [Login failed: Account locked out] alerts not received but we are receiving the following alerts fr the DB instance.
1. Database Backup Failed To Complete
2. Login failed: Password expired
3. Log Backup Failed to Complete
4. Login failed: Password cannot be used at this time
5. Login failed: Password must be changed
6. IS Package Failed.
Why we are not receiving the "Login failed: Account locked out" ? Customers are asking the notification email alert for this Rule even I have checked the override settings everything is enabled by default same as above rules.
What can be the issue here ?
Thanks,
Saravana
Saravana Raja

Hi,
Could you please check the Windows security log for (MSSQLSERVER) event ID 18486? The rule should rely on this event.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

SCOM 2007 Runbook "Missing Extensions"

Yes, I have the OM console installed on the Runbook server.
We are using SCO 2012 R2 with SCOM 2007 R2 CU7.
I have a simple runbook which starts with the Monitor Date/Time activity > finds warnings > the age > and either closes the warning or creates a critical alert depending on some variables. The runbook runs great in the tester. But when we
actually run it, it will start and then abruptly stop. The log will say that it is missing extensions.
Even when i create a 1 activity runbook (Get Alert) it will succeed in the tester and fail with missing extensions when run live.
Very similar to: http://social.technet.microsoft.com/Forums/en-US/2f30bc5a-4387-4ff2-a518-2d80cfaa0686/runbook-error-some-of-the-extensions-are-missing.
Except we have the console installed.
Question 1: What else may cause the SCOM IP to be missing some extensions/binaries?
Question 2: When using SCO 2012 R2 with SCOM 2007 R2, should we have the SCOM 2007 R2 console, or does the IP actually need the SCOM 2012 console?
Question 3: Why arent these extensions/binaries built into the SCOM IP, or at even installed when SCO is installed? I'm no software developer, but it seems incomplete. (This question was mostly rhetorical)
- Get on the floor, do that dinosaur

Hi,
the problem in the thread you referred to was that the Integration Pack was not Installed on the executing Runbook Server: "Runbook 'Name' stopped some of the Extensions are missing"
See
http://www.sc-orchestrator.eu/index.php/scoblog/99-functionality-differences-executing-a-runbook-with-runbook-tester
The knowledge with the SCOM2012 IP and Operator Console is a combination from my experience from field and here:
http://social.technet.microsoft.com/Forums/en-US/8247b6b8-d84b-46f5-a964-2d04568eb5cb/orchestrator-2012-with-ip-for-operations-manager-2007-r2?forum=scoscip
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

MS System Center Operations Manager 2010 Download required for Upgrade from SCOM 2007 R2 (Select)

We need the download of SCOM 2012 without Service Pack1.
Upgrade from SCOM 2007 R2 (select license) fails while upgrade check with error: Logs shows "At least one of the following applications is installed on this computer. Due
to incompatibility with System Center 2012 - Operations Manager, these applications must be uninstalled."
Upgrade was started from dos elevated prompt with modified parameters like this:
setup.exe /silent /upgrade
/AcceptEndUserLicenseAgreement:1
/UseLocalSystemDASAccount
/DataReaderUser:<domain\user>
/DataReaderPassword:<password>
Research in internet and we found another person with same issue, which reports that direct upgrade from SCOM 2007 R2 to SCOM 2012 SP1 is not possible but if upgrade is done over
SCOM 2012 to SCOM 2012 SP1 it succeeds.
Unfortunately, we don't find any downloads for the first release of System Center 2012 e.g. Operations Manager.
Everything shows Service Pack 1 or the newer R2.
Who can help?

Our “Recommended” rolling upgrade path looks like the following:
SCOM 2007R2 CU4+ > SCOM 2012 RTM UR2+ >
SCOM 2012 SP1 UR4+ > SCOM 2012 R2
Also you can refer below link
http://blogs.technet.com/b/kevinholman/archive/2014/01/20/do-i-need-a-specific-cumulative-update-release-ur-in-order-to-upgrade-to-scom-2012-or-2012-sp1-or-2012-r2.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical

Stopping scom 2007 & 2012

Similar Messages

Maybe you are looking for