Stopping Services

I too, am getting the stopping services error. It will load to that point and stop with a messages saying an error occurred. I went to control panel under admin tools and went to ipod and changed serices to automatic. I tried to install again and got the same message. What else is wrong?

that can happen sometimes if the itunes installer is having a hard time shutting down either itunes or quicktime (or applications using quicktime) prior to the install. so let's try a "download, restart, then install strategy."
leave your ipod unplugged.
download and save a copy of the itunes installer to your hard drive. (do not run the install on line, and do not start the install by clicking on the iTunesSetup.exe (installer) file just yet.)
iTunes 7.0.2.16 Installer
shut down running applications and restart the PC.
do not open any other applications prior to attempting the iTunes install. switch off antivirus and antispyware applications prior to the install.
now start the install by doubleclicking the iTunesSetup.exe file.
does the install go through properly this time?

Similar Messages

Failover Cluster in SQL 2012 in not auto switch when stop service SQL

Good Morning to all,
I'm Mr.Tuyen from VietNam. I have a big problem with AlwaysOn High Availabity in SQL 2012.
I setup 3 server and join Availabilty Group. Ex: Server A (Primary), Server B (Secondary), Cluster Qourum is only node. I have test:
1. Stop service SQL server A, immediately server B is Primary
Start servicel SQL server A, Server A is secondary
2. Stop service SQL server B, server is not Primary and "status is Resloving" and role cluster failed with error as belows
[i]Clustered role 'XXX' has exceeded its failover threshold. It has exhausted the configured number of failover attempts within the failover period of time allotted to it and will be left in a failed state. No additional attempts will be made to bring the role
online or fail it over to another node in the cluster. Please check the events associated with the failure. After the issues causing the failure are resolved the role can be brought online manually or the cluster may attempt to bring it online again after
the restart delay period.[/i]
or
The Cluster service failed to bring clustered role 'XXX' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered role.
Do you have same error?

http://blogs.msdn.com/b/sqlserverfaq/archive/2012/03/15/inf-alwayson-the-secondary-database-doesn-t-come-automatically-when-the-primary-instance-of-sql-server-goes-down.aspx
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

Batch file to start and stop services

I've setup a CF Probe on my Development Server to ensure my
CF Production server is up and running (services = Apache and CF
Application Server). It checks the PROD login page and if it times
out in 30 sec the probe fails. I understand I can execute a file
(batch file with net start and net stop) but the problem is I need
to have the probe somehow point to the .bat file on the PROD server
and not on the local machine. How can I remotely access this batch
file and execute it? I don't know how to point to the file on the
other server... can anyone help?

Hi Ken,
You had pointed me in the right direction regarding the
psstools in order to create a batch file that can remotely start
and stop services.
i used the psexec command and am able to successfully restart
the services needed remotely... however when i pick the file in the
coldfusion administrator (in the probes section) how to i point to
the batch file to run? it seems like the probe is not running the
script like i want... the file is located on the c:\ so i entered
c:\test2.bat...
Thanks,
Matt
Matt,
You should review the online help in the cfadmin for probes
and the links it points you to in the developer's guide. Basically
you need to define a new probe in the cfadmin by clicking the
"Define New Probe" button. One of the probe's attributes will be
what action. Define the action as a program and point it at a batch
file running psexec. You will probably need to run CFMX as a
specific user and not as localsystem, which is the default.

Error 1921: Stopping Services

During the middle of the installation and error pops up, tittled 1921. The error says I need to verify my Apple Services something. Can somebody please help me? Thank You.

I'm having the exact same problem.
Here's my situation: I downloaded iTunes a few years ago, never thinking I would get an iPod. It's version 4 or so. Now I just got an iPod and I needed to update to the newest iTunes because iTunes 4 wouldn't recognize the iPod. I try to install and it stops at "Stopping Services", then after a little while this error pops up:
"Error 1921.Service iPod Service (iPodService) could not be stopped. Verify that you have sufficient privileges to stop system services."
I click Retry and it happens again. I click Cancel and it exits.
I tried to uninstall thru Control Panel, and the exact same thing happens: it stops at "Stopping Services" and the same error pops up.
I still have dial-up, and I have some songs that I haven't downloaded yet. I wonder if this has anything to do with it...
Please, if anyone can help, this is driving me nuts! Thanks.

Start/stop service log for workgoup server

customer would like to know who start or stop the service on workgroup server.
But we could not find such log. Is there any way to see this information?

This one may help.
http://windowsitpro.com/systems-management/access-denied-auditing-users-who-might-be-starting-and-stopping-services
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Does Golden Gate provide any Webservices to start and stop services?

Hi all,
We are trying to use GG in our application. But we need a way to start and stop services from java code.
Is there any Webservice interface or API to start and stop Golden gate services like GG manager, extract and replicat processes??
Thanks in advance for your help.
Yamini.

You can control this at a database level using EVENTACTIONS parameter.
Create a table at source & target called "EVENT" with field EVENT_TYPE ( example names only - please call it what you like ) .
at Replicat config actions based on the data passed into the EVENT_TYPE column
MAP GG_ADM.EVENT TARGET GG_ADM.EVENT, &
FILTER ( (@STREQ(@IF(@COLTEST(EVENT_TYPE,PRESENT),EVENT_TYPE,"No EVENT"),"STOP") = 1)), &
EVENTACTIONS (IGNORE , LOG,STOP);
You'll need a seperate replicat to handle the start
MAP GG_ADM.EVENT TARGET GG_ADM.EVENT, &
FILTER ( (@STREQ(@IF(@COLTEST(EVENT_TYPE,PRESENT),EVENT_TYPE,"No EVENT"),"START_APP_02") = 1)), &
EVENTACTIONS ((SHELL (${GG_HOME}/diroby/start.ksh R1APP_02 )));
Hope that helps

BI server start/stop services

Hi,
We have OBIEE installed on a unix server. Previoulsy I worked on OBIEE on windows server and would go to services and start/stop services. My question is if we modify the rpd and ftp it to unix server, do we have to stop and start the BI server for the modified rpd to work. Is it mandatory to stop the BI server, ftp the rpd and then start BI server again. Or if we do not stop the BI server and just do Refresh matadata from Answers..will this work? Thanks.

Hi User,
You should restart the services if u ftping the rpd to unix means deploying the rpd to effect the changes
When comes to refresh metadata this ll work in case when the rpd opened in online mode and some one has made changes to get the available changes u have to do "Refresh Metadata"
Thanks,
Saichand.v

Stopping Services Installation Error

When i try to uprgrade/install the new itunes, for the new ipod i just got it installs for a bit but stops at stopping services and waits a few minutes then bring up a pop up saying "service "ipod service"(ipodservice) could not be stopped. Verify that you have sufficent privellages to stop system services. Can anyone help me?

That can happen sometimes if the itunes installer is having a hard time shutting down either itunes or quicktime (or applications using quicktime) prior to the install. So let's try a "download, restart, then install strategy."
Leave your ipod unplugged.
Download and save a copy of the itunes installer to your hard drive. (Do not run the install on line, and do not start the install by clicking on the iTunesSetup.exe (installer) file just yet.)
Latest iTunes Installer
Shut down running applications and restart the PC.
Do not open any other applications prior to attempting the iTunes install. Switch off antivirus and antispyware applications prior to the install.
Now start the install by doubleclicking the iTunesSetup.exe file.
Does the install go through properly this time?

Error: "Stopping Services" when upgrading itunes :-( help!

i needed to upgrade my itunes so that i could use my new ipod nano. when i went to do this, i got almost all the way through the download until it says "stopping services." Then after thinking for a long time an error comes up saying the "ipodservice" could not be stopped. Verify that you have sufficient privileges to stop system services. Now, my old itunes is missing. And the new one isn't finished installing. What should i do!?
i have windows xp

that can happen sometimes if the itunes installer is having a hard time shutting down either itunes or quicktime (or applications using quicktime) prior to the install. so let's try a "download, restart, then install strategy."
leave your ipod unplugged.
download and save a copy of the itunes installer to your hard drive. (do not run the install on line, and do not start the install by clicking on the iTunesSetup.exe (installer) file just yet.)
Latest iTunes Installer
shut down running applications and restart the PC.
do not open any other applications prior to attempting the iTunes install. switch off antivirus and antispyware applications prior to the install.
now start the install by doubleclicking the iTunesSetup.exe file.
TRY THAT THE GUY TOLD ME THAT AND IT WORKS NOW. its cool.

Starting and stopping services of SAP and database

pls tell what are the Starting and stopping services of SAP and database

Hi Ranga,
The services dealing with SAP and database(Ex: Oracle in this case) are:
SAP<SID>_<Instance No.> (For ex: SAPECC_01)
SAPOsCol
Oracle<SID><No>Listener
OracleCSSservice
OracleService<SID>
Reward points if it is helpful##
Thanks & Regards,
Santhosh P
Please change the status to answered if you got the solution...
Message was edited by:
Santhosh Kumar P

Worth it? Auto start/stop services and change iptables rules

I have recently set up a crontab to start/stop services based on my schedule, such as when I'll be home or away. I intend to only have a service running when I'll probably use it.
I also integrated rules for iptables into the start/stop of the services (systemd), so they automatically modify rules to accept/reject on their ports when the services start/stop.
I am behind a router, so I only forward outside ports I use like ssh (which is not on port 22). I manually forward ports, but am looking at UPnP. This is my home network so I should be able to trust the devices on it.
Now, to my question. Is it worth the time and effort to set this up? Would it be fine to just enable the services I use, let them run and always have firewall ports open for them? I feel like it's good to limit the time that ssh is running, but what about services not open to the Internet? Resources aren't really an issue. What do you guys think?
I enjoyed learning about systemd, iptables, and cron in the process of setting it up. I'd just like to also learn about how much benefit there actually is, or if anyone has other ideas. Or if it's something that could go on the wiki (not really cron, but maybe the iptables/systemd stuff).

I'd say, if resources aren't an issue; why limit the time ssh is reachable from the outside? You should have PasswordAuthentication and RootLogin disabled anyway so your vulnerability doesn't really decrease by updating iptables? This script probably works fine until you forget about it and it makes a boo-boo; making your machine unreachable.

HyS9BPMA_ProcessManager "Failed to stop service"

Consultants are installing and configuring Hyperion 11.1.1.2, when shutting down services, HyS9BPMA_ProcessManager, fails to stop and generates the following message in the event log.
Failed to stop service. System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it xx.xx.xxx.xx:5250
(IP address masked for security reasons)
Server stack trace:
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.Runtime.Remoting.Channels.RemoteConnection.CreateNewSocket(EndPoint ipEndPoint)
at System.Runtime.Remoting.Channels.RemoteConnection.CreateNewSocket()
at System.Runtime.Remoting.Channels.SocketCache.GetSocket(String machinePortAndSid, Boolean openNew)
at System.Runtime.Remoting.Channels.Tcp.TcpClientTransportSink.SendRequestWithRetry(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream)
at System.Runtime.Remoting.Channels.Tcp.TcpClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
at System.Runtime.Remoting.Channels.BinaryClientFormatterSink...
Is this a configuration issue within Hyperion?
For more information, see Help and Support Center at

resolved.. Took some time for the port to be released.

Must I stop services of sharepoint 2007 for cleaning audit logs?

must I stop services of sharepoint 2007 for cleaning audit logs, if I cleaning them by
utilities
http://technet.microsoft.com/en-us/library/cc706879(v=office.12).aspx) or
http://sharepointauditlog.codeplex.com/ ?

SharePoint service will be slow or not accessible during the time you trim your log. I suggest to do this activity after business hours.

What is "stopping services"???

when trying to re-load Itunes, it goes through the motions, but gets hung up on "stopping services" and tells me to check that I have authorization to stop these services... How do I do this? How do I get Itunes re-installed on my computer. My Ipod wasn't being loaded, so I figured there was a situation with my programming, but now, I can't even get it back...
HELP!!!
All suggestions welcomed.

when trying to re-load Itunes, it goes through the motions, but gets hung up on "stopping services" and tells me to check that I have authorization to stop these services... How do I do this? How do I get Itunes re-installed on my computer. My Ipod wasn't being loaded, so I figured there was a situation with my programming, but now, I can't even get it back...
HELP!!!
All suggestions welcomed.

Windows pc cant run latest version of itunes message "cant stop services"

I purchased an ipod nano for my daughter, I loaded the latest version of Itunes found at the apple website. tried to run the program and the program stopped an said "cant stop services"
What can I do?
THANKS

I am having a similar problem. When running iTunes setup, I receive a message Service 'iPod service' could not be stopped. Verify that you ahve sufficient priveleges to stop system services. Any help would be appreciated!

Stopping Services

Similar Messages

Maybe you are looking for