Stopping the Enterprise Manager Console (Oracle 10g on SuSE 9.1)

I'm trying to stop the Enterprise Manager Console by issuing the command:
${ORACLE_HOME}/bin/emctl stop dbconsole
Unfortunately, the command fails to stop the EM Console. Here's the output I get:
TZ set to US/Pacific
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://<hostname>:5505/em/console/aboutApplication
Stopping Oracle Enterprise Manager 10g Database Control ...
--- Failed to shutdown DBConsole Gracefully ---
failed.
The only way I can stop the EM Console (and related services--i.e., emagent) is to kill its process.
Everything (Listener, DB Instance, EM Console) starts fine. I can stop the Listener and DB Instance without any problems. It's just the EM Console shutdown that doesn't happen cleanly.
Has anyone else encountered the same condition? If so, what was the solution?
Here's my operating environment:
SuSE 9.1 (Kernel 2.6.5-7.108-default)
Oracle 10g
Thanks in advance for any help/insight.

Has anyone else encountered the same condition? If so, what was the solution?Yes. Shutdown/reboot of the system made the error go away.
Sorry, no better clues,
Toni

Similar Messages

Enterprise manager console for 10g.

How do I get enterprise manager console for 10g? I installed 10g on my machine awhile ago and just noticed that enterprise manager console was not installed with it. When I installed Oracle 9 a while back, the console was installed automatically.

DB Control Repository is needed to run EM. To create it you can use emca or dbca command.
See http://download-west.oracle.com/docs/pdf/B12013_01.pdf
Paul

Create a recovery catalog by using the Enterprise Manager Console

Dear Sirs:
I am using the Oracle9i database release 2. After installing the management server and running the Enterprise Manager Configuration Assistant, there was no recovery catalog and no CATTBS tablespace created. According to the Help and to your documentation entitled Oracle Enterprise Manager Configuratrion Guide this recovery catalog and CATTBS tablespace should be created automatically.
Of course I am not running any target database on the same machine.
How can I create a recovery catalog by using the Enterprise Manager Console, and not by using the rman command prompt?
Please its urgent and I need an answer as soon as possible.
Thank you in advance with best regards

Dear Sir:
Thank you very much for your reply, but unfortunately it didnt help me. This article is repeating what is mentioned in the Help and the documents that I downloaded earlier. As I said earlier I know how to setup the recovery catalog by using the rman command prompt, but I couldnt do it by using the Oracle Enterprise Manager Console. By using the wizards it is supposed to be created automatically but nothing of this happened.
Please I need help urgently.

Unable to launch Enterprise Manager console(Oracle 9.2.0.4.0)

I am using oracle 9i db (9.2.0.4.0).
when i try to launch oracle enterprise manager console i am not able to do so.
In short
After putting username, password,service,connect as ...
and clicking on OK button.
nothing happens.No message,no warning.
but i am able to connect to the same schema in sql*plus.
please suggest wat needs to be done.

I met the same problem, can use plsql to connect db (oracle 10g release2), but in the enterprise manager webpage, when I keyed in the right userid/password, nothing happen, but if I purposely key in wrong userid or password, it will show "invalide userid or password", can anyone help?

Job option in the Enterprise Manager Console

Hello,
I had just installed an 9.2.0.1 oracle db. In my Enterprise Manager Console, i don't see the job and event option like the documentation shows it. Can anybody tells me how to have these options in my Console ?
Thank's in advance

Log into the OEM Console as the SYSMAN account. Click the "Manage Administrators" selection from the "Configuration" Menu. Select your ID and click the "Edit" button. Click the "Access to Job System" and "Access to Event System" check boxes, and click OK.
Refresh the OEM session under your ID and you should see the "Events" and "Jobs" branches of the Navigator tree.

Unable to access Oracle Enterprise Manager in Oracle 10g AS Machine

Hi All,
We are working on oracle forms 10g in 3 tier architecture. I have installed oracle 10g Infrastructure (OraHome_1) followed by oracle 10g Application server (middle-tier,OraHome_2). I have copied all the forms to OraHome_2\forms folder and compiled them successfully.
When i tried to access enterprise manager (Infrastructure)thru http://myappserver:18100, i was unable to do so. It displayed "page cannot be displayed".
Also
When i tried to access enterprise manager (middle-tier)thru http://172.16.1.1:18101, i was unable to do so. It displayed "page cannot be displayed".
I checked for port status, thru “netstat –na” command, It was displaying
172.16.1.1 18100 TIME_WAIT
172.16.1.1 18101 TIME_WAIT
172.16.1.1 7777 TIME_WAIT
Why is that i am unable to access the Enterprise Manager?

Hi All,
I was able to resolve the issue. Thr was a proxy server enabled in the IE in AS machine. Once i checked the option for bypassing it and turned off the windows firewall(OS was win 2003 server). I was able to view the home page at http://myappserver, then was able to access EM also.

Where is the Enterprise Manager in Oracle 8.1.5

Hi,
After installing Oracle 8i (8.1.5), I can't find the
Oracle Enterprise Manager. Where is it? In Oracle 8.0.5 on
NT, you can access it from the START button. In the Oracle 8.1.5
documentation, it talks about the Microsoft Management Console
where you can access the Database Administration Assistant.
When I select the database administration assistant menu
from the Start button menu, nothing happens. Do I need to
have Oracle 8.1.5 installed on an NT Server?
TIA,
Phil
null

Hi, beeftastic-
There are two color pickers - one is for solids and the other is for gradients. Here's a screenshot of the properties panel with the gradient picker icon highlighted.
Hope that helps!
-Elaine

SQL Tuning using Enterprise manager in oracle 10g

Hi,
In oracle 10g you have the enterprise manager which can be used to tune sql statements using the SQL Tuning ADvisor and SQL access advisor.
I believe in oracle 10g the process of SQL Tuning is slightly easier using the Enterprise Manager ...so if some one could explain me that process...
Again thanking you in advance
regds
Manoj Gokhale

Hi Manoj,
Didn't you already start two other threads about this same question the SQL forum?
How do i do the SQL Statement tuning
Enterprise Manager - sql tuning advisor , Access advisor for SQL Tuning

How to start the enterprise Manager console in GUI based.

I am totally confuse while using oracle10g Enterprise Manager Console based. I can't able to get the administrator privileges. Even though I had the administrator privileges and password I knew. But while administrating through Enterprise Manager in 10g little bit confuse for me.
Help me .. I am here to hear a quick response as soon as possible

DBA database privilege is different from EM Administrator privilege. Check to ensure you have the right one.

Installation of Enterprise Manager for oracle 10g

Hello.
have a database created on oracle 10.2.0.1.0, but I don't have installed the enterprise manager.
I need to install the enterprise manager to manage the database.
Anyone knows any procedure or any link to see some examples of installation.
Thank you for your help

A couple of quick points:
1. 10.2.0.1 is many years old an in desupport mode. Currently supported versions are 11.1.0.6 and above.
2. Enterprise Manager is not required to do anything and many of us prefer to not use it.
That said ... did you read the installation docs? Which ones? Please provide the link and explain what in the doc is not clear.

How can I enable Enterprise Manager in Oracle 10g?

Hi,
We recently installed Oracle 10g on a MS Window server and after the installation which we created 2 instances each with a default schema from an existing data file (.dmp). After the installation, I realized that somehow, the DBConsole entry is missing in the Windows Services which then prevent me from being able to launch the new browser-based EM.
We thought we have picked all the components during the installation but for some reasons, it seems like the necessary files or configurations for EM was not there. So I was wondering if anyone know how I can manually install and configure EM?
Initially I thought if I go thru Oracle Universal installer and re-install everything again, it might help but I am concern that it will then wipe out the 2 instances and schemas that we have already created, especially since I have also applied the 10.2.0.3 patch already. So there was some discussions on calling the emctl program which when I tried, it I got error saying that ORACLE_SID not found. Then there was also some documentation on using the EMCA command to build the dbconsole, is that what I should do?
Lastly, I was under the impression that one will only setup one EM per server, which means in a perfect world, I will have one instance of the EM which will then allow me to manage the multiple instances (and their schemas) from the same console, is that correct? Or is one EM instance only manages one instance of the database? So if I have TESTDV & TESTUT configured on the same server, I will need to also create two EM consoles?
I am an amature and am more familiar with Oracle 9i which the EM seemed to be easier to use and setup. So I think I must have skipped or missed some steps during my 10g installation but am concerned that if I reinstall, I will lose everything.
Thank you very much.

First of all, thank you as always for taking the time...
I apologize in advance if I am not using the right terminology. Basically, I have only one Oracle Home directory on that server but I am able to create two different instances and in both cases, I have left the port number to be the same thinking that it's only one physical installation. I thought I would attach my TNSNAME and LISTNER ora files below to give you a better picture of my current setup.
So for me to connect to the database and the appropriate instance for example, like using SQL Developer, all I have to do is specify the Host Name to DBServer and then the Service Name to either TESTDV or TESTUT. Then I can connect to each of the instance directly.
But I only have one Oracle_Home directory and use the same port number as the default choice. So to your comment, if I only have one Oracle_HOME and one Port number, should I only install one EM instance?
Thanks much.
******In the TNSNAMES.ORA file:*****
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
TESTDV =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = DBSERVER)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = TESTDV)
TESTUT =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = DBSERVER)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = TESTUT)
*****In the LISTNER.ORA file:*****
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_NAME = TESTDV)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME = TESTDV)
(SID_DESC =
(GLOBAL_NAME = TESTUT)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME = TESTUT)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = DBSERVER)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
)

Need to configure Enterprise Manager after Oracle 10g installed on Windows7

I have installed Oracle 10g on Windows7 machine. At end of installation a error msg pop up saying "Enterprise Manager is not installed properly. You can install it using emca.bat file later".
I then run emca.bat file. But EM was not installed yet.
Any solution to install Enterprise Manager would be great.
Thanks.
Edited by: 889075 on Mar 23, 2013 7:34 AM
Edited by: 889075 on Mar 23, 2013 7:35 AM

889075 wrote:
I have installed Oracle 10g on Windows7 machine. At end of installation a error msg pop up saying "Enterprise Manager is not installed properly. You can install it using emca.bat file later".
I then run emca.bat file. But EM was not installed yet.
Any solution to install Enterprise Manager would be great.
Thanks.
Edited by: 889075 on Mar 23, 2013 7:34 AM
Edited by: 889075 on Mar 23, 2013 7:35 AMBTW, V10 Oracle is unsupported
which version of Oracle to 4 decimal places?
which edition of Windows 7?
How do I ask a question on the forums?
SQL and PL/SQL FAQ

Where is the Enterprise Manager Console going to in 10?

All , where can i find out the EM in 10g? I've installed the Enterprise version ? The EM would be removed in new 10g? or is there another tool replaced it ? thanks..

Do you want to create Oracle Enterprise Manager
manually? I don't believe that's possible-- you need
to install OEM.
Are you asking how to create a database manually,
rather than through the DBCA?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC
I have created database through DBCA, but in the end I choice "Generate Database Creation Scripts" but no "Create Database". Later I have run script, but OEM no created. My OS - w2k. After completion scripts I not detected Windows service "OracleDBConsoleSID". Why? In DBCA I checked "Configure the database with Enterprise Manager".
Sorry for bad English.

Problem In Enterprise manager with Oracle 10g AS 10.1.3.1.0

dear all,
I installed Oracle Application server 10g (10.1.3.1.0) on REDHAT Enterprise Linux 4 AS Update 4, so evrything done throu installation , but after installing when i try to open EM with browser http://localhost:7778/em not working and appear mesage (The Request URL/em was not found on this server) so i tried with ip-addressand with FQDN but not working, opmnctl service all running successfuy !!! (OC4J ,HTTP all working done - i made restat to all opmn services and the same result!!!!)
how can i solve this problem????
Thanks

Thanks Dear Jacco,
but i installed only OC4j and HTTP components , so control is working opmnctl working every think and components working good , but the strange in this case when i tried to fine emctl file but its not found !!!! (emctl start iasconsole) in this version of Oracle 10g AS .
what u think?

Oracle 10g Enterprise Manager Console bug?

I think I have come across a bug in the Oracle 10g Enterprise Manager Console. If I go into my database, then into the schema, select your schema from the list, then tables. Now once your in your tables, find one that you know of and know fairly well, right click it, and select the show dependencies. A small window will open with just that table and its tablespace and user. Select user, database name, profile, then default. If you right click on the "default" and select "show dependencies" a blank blinking window will open and stay stuck in an infinite loop until you kill the application window. I think that this is a cumbersome tablespace issue. Any thoughts?

Hi Ugonic
Sorry both are same, it's spelling mistake it's " WCMMISLINK". Acutally, my database is getting updated but this alert log is getting generated in enterprise manager console of 10g.
The sql statement is
CREATE MATERIALIZED VIEW ADASNAP REFRESH FAST START WITH SYSDATE NEXT SYSDATE+1 AS
SELECT * FROM ADA@WCMMISLINK;
CREATE MATERIALIZED VIEW BGTABSNAP REFRESH FAST START WITH SYSDATE NEXT SYSDATE+1 AS
SELECT * FROM BGTAB@WCMMISLINK;
The above query is sheduled to run every day .
and i get the following Alert log in 10g enterprise manager console
Generic Alert log ORA-12012: error on auto execute of job 54
ORA-04052: error occured when looking up remote object WCMM.SYS@WCMMSERVERLINK
ORA-00604: error occured at recursive SQL level 3
ORA-12514: tns no listener
ORA-06512: AT "SYS.DBMS_SNAPSHOT" line 1883
can you guid me why the above error are occuring
Regards
Niranjan

Stopping the Enterprise Manager Console (Oracle 10g on SuSE 9.1)

Similar Messages

Maybe you are looking for