Stopping the "flip" effect during music playback and photo screensaver

Hi,
I love apple TV but have two things that I find really irritating.
Every minute or so as the screen saver plays the floating photo's it flips the entire screen around. Any way to turn this off?
Also, when playing music the album art starts on the left then flips to the right every couple of minutes then flips back. It would be great to turn this effect off! Any ideas?
thanks,
Dan

The flipping for the album art is I believe a lame screensaver attempt, but if so not a very good one.
Can't be disabled anyway.
AC

Similar Messages

  • My Apple TV stops and returns to main menu during movie playback and photo slide show via homesharing. I have a second Apple TV in another room that works fine.

    My Apple TV stops and returns to main menu during movie playback and photo slide show via homesharing. I have a second Apple TV in another room that works fine.

    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel.

  • After 1.1.1 update: iPod locks the phone during music playback

    My iPhone gets locked during music playback. It worked fine during the the first few hours after the upgrade but now it stalls or locks up completely. Anyone else experiencing the same?

    First, for safety, do a quick diagnostic of the iPod.
    You can do this by starting a sync as usual with iTunes, then enabling Disk Use. Now, go to Utilities/Disk Utility on your desktop, and perform a diagnostic - it should take only a few seconds. Now, go back onto iTunes and Disable Disk Use (so you can take your cable out).
    As long as you have the iTunes desktop up, click Check for Updates, and then Update. (They update thee software every month.)

  • IPod freezes randomly for a few secs during music playback

    Hi,
    My 'iPod Classic 160' is playing up of late.
    It started a few months ago. During music playback, it would freeze for a 'fraction' of a second randomly but as time has gone on, it freezes for up to 5 secs now. I've used iTunes to 'restore' my iPod and have the latest firmware updates, but still the same problem. I use MP4 for music.
    Troy

    Hi,
    My 'iPod Classic 160' is playing up of late.
    It started a few months ago. During music playback, it would freeze for a 'fraction' of a second randomly but as time has gone on, it freezes for up to 5 secs now. I've used iTunes to 'restore' my iPod and have the latest firmware updates, but still the same problem. I use MP4 for music.
    Troy

  • N70-ME, scree flicker during music playback

    Hi,
    I noticed that the screen flickers (with some white banding lasting few milliseconds, every few seconds) during music playback (128kbps AAC). Is it because the processor is too slow, or is there a known software glitch ?
    thanks,
    bd

    Is this happening in iTunes or on the iPod?
    If iTunes, can you open the same song in QuickTime and does it pop and click also?
    I don't know the apple contact stuff, it's posted around here somewhere though.

  • Clicking noise during music playback

    During music playback on my iphone 3G I get a faint continuous clicking noise in the background, its just audiable over the music and really gets on my nerves. I've tried my iphone with several different types of ear phones, apple and non-apple but its always there, on every song I play.
    I have also listened to tracks from the macbook through itunes to see if the sound is on the track but the music plays through nice and clear from my macbook.
    Has anyone else had this problem? Has anyone got any ideas about how to fix it?
    Sam

    Hi Sam,
    Are you seeing this issue with tracks purchased from the iTunes Store or with tracks imported from CD?
    Try testing with FREE on iTunes content> go to iTunes Store> FREE on iTunes near the bottom center of the page.
    If the issue happens with music purchased from the iTunes Store try restoring the iPhone.
    http://docs.info.apple.com/article.html?artnum=305744
    If its only happening with content imported from CD or sources other than the iTunes Store, try importing the tracks again or converting them in iTunes.
    Jason

  • Does the Iphone 3G support music playback via a bluetooth headset?

    Hi All,
    Does the Iphine 3g support music playback via a bluetooth headset at all, I suspect not...

    It's been on many a user's requested feature list since the first iPhone, and people were disappointed when it didn't show up on the 3G. The adaptor he links to will get the job done.
    I have to admit I've demoed a couple of bluetooth stereo headsets, and the music sounded awful. Perhaps it's improved, but for this reason it's not a feature I've personally wished was included.

  • How can I stop the execution on a JSP page and start it again

    Hi
    I am making a program that simulates how to manage transactions when accessing a database by using locks. I have run into a problem and I hope someone has the time to help me.
    When a user does an update the transaction commits and releases its locks when the program executes
    <%stmt.executeUpdate("commit!"); %>
    I need to put a break in to stop the program executing this statement, to illustrate the lock is set correctly.
    I have tried to put in an alert box but this does not prevent the rest of the java code being executed.
    I have tried to use prompt boxes, JavaScript functions, but these functions cannot have any java code in them.
    I have tried using the java.swing JOptionPane boxes but this didn?t work either
    I have tried to get input from the user but I don?t know how to retrieve this data on the same page. (As far as I know you have to use submit and even refresh the page or retrieve it on the next page).
    Does anyone know how I can stop the execution on a JSP page and start it again (on same page)
    Mette

    I already have another client (Tomcat jsp application) running and it throws a SQLException correctly when I don�t put in a commit=true statement and don't close the database connection.
    But the problem is how to get the code above to stop to illustrate I have set this lock.
    I have tried to use the JOptionPane but because my program is running in a web browser I cannot use the JOptionPane dialog box.
    I have tired using an alert box but it executes the commit statement before the alert box is dispayed. So this does not work
    While (i < 2)
    if( i==1)
    %>alert(�The transactions commits when you press Ok�); <% //what it to stop execution here
    else
    stmt.executeUpdate(�commit�);
    I am not using threads so I cannot use the sleep function.
    I am using mysql and have already configured it to detect deadlocks and how long to wait for locks.
    Thanks for your help
    Mette

  • I'm getting the grey screen during start up and can't boot the computer. I did a cmnd R but worried it would automatically wipe my hard drive and reinstall OS.  Is there a risk at cmnd R will result in wiped HD without me actively making that choice?

    I'm getting the grey screen during start up and can't boot the computer - MacBook Pro with lion.
    I did a command r after doing some research but got nervous that it would automatically wipe my hard drive and reinstall OS.
    I was nervous because it asked me for language for software use before any options were presented (such as repair via disk utility). It looked similar to an OS install.So I powered off....Is there a risk at command r will result in wiped HD without me actively making that choice?

    Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                    three times faster than wireless.

  • A small but very irritating bug in Mail: after pressing the spacebar after typing an apostrophe in a word such as "we're", the cursor moves to the left i.e. backwards, and not to the right, effectively deleting a space and not creating one.

    When composing an email in Mac Mail I've noticed a small but very irritating bug: pressing the spacebar after typing an apostrophe in a word, e.g. "we're", the cursor moves to the left i.e. backwards, and not to the right, effectively deleting a space and not creating one.
    Any ideas?

    I just recreated this problem on my iMac (wired KB, no wireless KB) by changing Mail > Preferences > Composing > Spellcheck from "as I type" to "never". Then type a contraction ending in 're and the space bar causes the cursor to jump back as others have stated, to the spot 'r|e
    Next, I went into System Preferences > Keyboard > Text, and turned off "use smart quotes" and the problem went away again.
    From this point (smart quotes off, spell checking never), if I turn Smart Quotes ON, the problem returns.
    The problem is dependent on the state of both settings.
    The spacebar in Mail "works" if I have either of the following setting combinations:
    Keyboard: smart quotes OFF, Mail: check spelling ANY SETTING
    Keyboard: smart quotes ON, Mail: check spelling AS I TYPE
    Other combinations FAIL
    Keyboard: smart quotes ON, Mail: Check spelling NEVER
    Keyboard: smart quotes ON, Mail: Check Spelling WHEN I CLICK SEND
    Looks to me like there's a bug in Mail > Preferences > Check spelling > NEVER and WHEN I CLICK SEND that interacts badly with Keyboard > Smart quotes ON.
    Thanks.
    Todd Smithgall

  • How do I stop the spinning ball that keeps going and going and going

    How do I stop the spinning ball that keeps going and going and going.  I think I have to remove cookies, but I don't know how.

    I think I solved it.
    I searched my extensions folder (in my profile) for all image files (PNG and JPG), and found the pop-up images to be in an extension folder related to Firefox Sync (not an external extension, actually). But even though I had already disabled it and un-linked this computer from Firefox Sync, the message still popped-up.
    I think the image filename was SYNC.PNG, or something like that. Close Firefox, find the folder where that image is in, and rename the main folder (the one right under the extensions folder) to some other name (such as "original name_copy"). Then start Firefox. Check if it works OK and if the pop-up ceases to appear. If everything OK, then you can delete that folder.
    If something goes wrong, just rename the folder to what it was before.

  • I can not adjust the automatic download for music, apps and books at the iPhone and the iPad. where is the mistake?

    I can not adjust the automatic download for music, apps and books.
    This is a problem by my iPhone and my IPad.
    Where is the mistake??

    Settings > Store > Change the settings you want.

  • Ow do I stop the ipad from playing music automatically when plugging into my car?

    I'd like to play my Scorch application through my car speakers but the iPad starts my music instead and doesn't give me an option to not play it.  Anyone know if it's possible to change it so it doesn't start automatically?

    I have the same issue.  Was attending a major conference, sitting in the VIP section, and suddenly in the middle of the keynote address, I heard music playing, coming from my leather bag.  Struggled to turn it off quickly before disrupting the event, but alas I wasn't quick enough.  Also have the new iPad.  Have tried everything, but it keeps launching sometime after I close the cover.  Need a solution, please!

  • If I download and update my iphone 3G will I loose all my music, apps, and photos?

    If I download and update my iphone 3G will I loose all my music, apps, and photos?

    No.  Look at the section titled Updating your iPhone, iPad or iPod Touch in http://support.apple.com/kb/ht1414

  • My start up disc is full i have a macbook air, i back everuthing up with time capsule and  have movies all my music libraries and photos onto that too so as i have free space, but my max still says my startup disc is full with "other"

    my start up disc is full i have a macbook air, i back everuthing up with time capsule and  have movies all my music libraries and photos onto that too so as i have free space, but my max still says my startup disc is full with "other"

    First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    If you're using Time Machine to back up a portable Mac, some of the available space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
    To locate large files, you can use Spotlight as described here. That method may not find large folders that contain a lot of small files.
    You can also use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Proceed further only if the problem hasn't been solved.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    Install ODS in the Applications folder as usual.
    Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
    When you're done with ODS, quit it and also quit Terminal.

Maybe you are looking for

  • Camera not switching ios7 Ipod Touch 5th Gen

    I have an ipod touch 5th generation and the camera won't switch around (for selfies).  Have tried to switch it with usual method as have owned it for a year and its just started doing this

  • Measue aggregation not used when OBIEE hits MV

    Hi, We are facing 1 issue in MV implementation in OBIEE i.e. aggregation is not used for measure when OBIEE hits the MV and it's using the aggregation when OBIEEhits the base table.Ex. A is a column with aggregation sum when we pull measure A for tti

  • Adobe photoshop elements 13 downloading errors

    I/m not about to install my adobe photoshop elements 13 for my windows pc can someone please assist

  • MacOs X 10.8 desktops change order by themselves

    Dear all, I am running MacOsX 10.8.2 I have enabled 4 desktops. I organize my workflow according to the placement of these desktops (by the way, I find it unconfortable that now the desktops are accessed in a linear fashion, not in the "box" fashion

  • Canon MP600 Scanner not recognised

    OSX 10.8.4 does not recognize my scanner in the Canon MP600 anymore plase advise why this is and how to correct it