Stopping tracks after each play

I broadcast athletic events and I'm using iTunes to play clips from ID's, to interviews and highlights. Is there any way in iTunes to get each item to stop after each play....so that it wont automatically go onto the next track?
Thanks!
Scott

Also, if you type in the title of the track at the top where it says "search," as long as there's nothing with too similar of a title, it will show only that one track that you typed in, and it will stop when it's over. It's almost like making a temporary playlist of the items containing only your search terms. That's what I do because I have far too many tracks to check/uncheck them each time I want/don't want one to play.

Similar Messages

When I export photos to Iphoto slideshow they crop more after each play. Is this common?

When I export photos to IPhoto slideshow they crop more and more after each play. Is this common?

No. In fact, I've never heard of it before.
It might help if you could give us some details. What do you mean by "export photos to iPhoto Slideshow"? DO you mean you're adding photos to a slideshow in iPhoto? Or hat you created a slideshow in iPhoto and exported that to the Finder?

AirTunes stops streaming after each song but iTunes shows it playing

I've read through a lot of posts and either people are having the same issue just describing them differently or I'm seeing an entirely different issue.
My setup is Windows Vista running iTunes 8, Airport Express and an iPod Touch running the Remote app. I just bought it all yesterday and did all the firmware and software updates it asked me to when setting it all up.
I had it setup wirelessly and working -- the remote controlled iTunes which send audio to my AE and it worked beautifully. Then I realized the music stopped, I went to check and iTunes still showed the music playing, but no sound was coming out of the remote speakers. If I change the speaker output to computer then back to the remote speakers it starts playing again.
I've disabled wireless on the AE and put a long wire across to rule out wirless interference or problems. I've disabled the Windows Vista firewall as well.
I've tested both from the remote and from using iTunes directly. So I've ruled out the Remote App from the equation (I think). I say that, because first thing this morning I ran using just iTunes and it worked for 15 straight songs. I used the remote to change albums and start another and after the first song played it went silent. I noticed in iTunes a playlist called "Remote" comes up so I was thinking the Remote was causing it. I switched over to my library local on iTunes again removing the remote and it keeps happening anyway. So I'm not sure if by using the remote I put it in this "state" or if it's really not the Remotes problem.
OK, so once it happens, it stops streaming after very single song however iTunes still shows it's playing fine. To fix, turn the speaker off then on again or switch to computer then back to remote again. It works doing this via the Remote App or on iTunes directly.
This is FRUSTRATING! I spent a lot of money on the iPod, AE and getting a cheap stereo receiver/amp to feed my in-house speakers and now it's pretty much not even useful.
Suggestions? Help? Anything?
Message was edited by: TimLindner

I wanted to post a follow-up. I solved my own issue after starting to rule out every possible cause.
I have a Western Digital networked hard drive (NAS) which houses all of my MP3's. I knew accessing this drive was pretty slow but I've had my MP3's on it and iTunes' library is all coming off this drive. It has worked fine on my computer for years. However, it appears that the lag doesn't play nice with AirTunes.
I moved my entire iTunes library (about 80 GB) to my local machine's hard drive, rebuilt my library and now it plays flawlessly!
Just so people know, I've updated firmware on the AirportExpress and the iPod Touch, I have the new version of Remote on the touch and am running iTunes 8 on Windows Vista with its library on the local harddrive. No glitches, pauses, or problems. I ran it for 6 hours during a party over the weekend without flaw.
-Tim

How to stop popups after each field

This is probably a really dumb question...
When I test a form, for each field after leaving the field it brings up a box with the past entries in it. So it takes 2 key strokes to
leave each field.
Unfortunately not knowing the name of this feature it's hard to figure out what it is so I can turn it off.
This happens for number and text fields.
I don't think the users would ever want this. If they did it'd be in only a few cases.
Anyone know how to turn it off?

Hi,
to change that behavior open the page attributes of your page. Go to section "Security" and set "Form Auto Complete" to No.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Re-syncing mp3s after each play?

Hey y'all,
I can't figure out what's happening- it seems every time I play a file on my Apple TV it re-syncs the same file when I open iTunes! This is, as you can imagine, frustrating. I'm using iTunes 8 and am in the process of downloading the recent Apple TV update (in the hopes that this will remove the issue).
But in case it doesn't, any ideas?
Thanks in advance!

Um, I was previously using the "automatic sync" for music content- but now the music tab of my Apple TV has disappeared completely. Help please! Although the content still remains, only the Movies and Photos tab are visible.

Playlist of podcasts stopping after each podcast

I manage which podcasts, and the order, I want to listen to using a playlist and until recently this worked as I wanted, i.e. when one podcast had finished playing my iPod started playing the next podcast in the playlist. Now it seems to be stopping playback after each podcast, this is very annoying.
Anyone know how I can get the iPod to not stop playback after each podcast?

No, for some reason it's not included as one of the features of the Podcast App.
If you need playlists (as many of us do), then delete the Podcast App and podcasts will return to the music app, complete with podcast playlist functionality.

USB hub and internet sharing stop working after sleep

Hi,
I have a relatively new Bluestork USB hub I purchased to connect multiple USB devices I have at the same time. It used to work correctly under Leopard, but now it stops working each time the computer wakes up from sleep. I have to restart the computer for it to start working again. Both link and power LEDs stay on, even when the hub is not recognized.
My second problem is related to internet sharing. It stops working after each sleep/wakeup cycle and the only way to make it work again is to restart the computer. It used to work correctly before Snow Leopard as well.
I have all the Mac updates installed.

Thanks Barry.
The hub is on its way to the manufacturer for after sales service...
But the issue with AirPort remains the same, even after resetting SMC.
Some clarification:
* It happens just after computer wakes up from sleep. Restarting solves the problem and the issue doesn't arise until computer goes standby again.
* The whole WiFi card becomes unresponsive. It is not only the Turn Off button, but the whole functionality is stopped. The card can not be activated/deactivated and it doesn't connect to any network. If it is used for internet sharing, clients are unable to connect.

Smart Playlists Stop Playing After Each Track

After updating iTunes to version 10.0.1.22 my smart playlists stop playing after each track. All songs or Podcasts in my smart playlists are checked so they should be playing consecutively but they're not.
Any help would be appreciated.

Make sure the little boxes to the left of the song names are checked. If you need to check all the songs in a single view at once, hold the CTRL key and check any one of the boxes.

Cant play tracks continuously - stops after each

Hi there - sorry, tried to do everything I could before resorting to this... I just got a new computer with Windows 7 so downloaded the latest iTunes and imported my library - all good except it stops after each track and doesn't play the next. So I uninstalled it, downloaded it again, and the same problem. Am I just being dumb and is there some setting I need to change? Thanks!

For unknown reasons, iTunes seems to have a bad habit of unchecking all the tracks when you reinstall or update. Certainly not always, but often enough that after every update there are a few people with the same problem.
Glad I was able to help.

Ipod stops after each track ends in a playlist?

I have a problem: Suddenly, my ipod stops after each track ends in a playlist. This happens with every playlist and every track, all of which worked fine until this week. All tracks' settings are "yes" on 1) part of a compilation; 2) remember playback position and; 3) skip when shuffling. I have not updated any software or added any new content to my ipod. I imagine that some setting has been switched on or off, but I am unable to identify which one. Please help as these are my audio books! Thanks!
nano 6th gen

Yilofall wrote:
I have an iPod Classic (I am fairly new to the medium) and when playing music the Pod goes smoothly from one song to the next but, when listening to a book (brought in from a CD copied into iTunes) it plays one track and stops.
See below for a link on how to copy a CD into iTunes if you want an Audibook.
I have tried checking the gap less album box (what is that for by the way) but it makes no difference.
If you've heard of Dark Side of The Moon by Pink Floyd then it's used there when you want no break between tracks. Or any DJ mixed continuos play CD. Or some classical music. Take your pick
Third question, can I make a book copied into iTunes an Audiobook? How?
[How to Import Audio CD audiobooks into iTunes|http://aldoblog.com/audiobooks/itunes/importing-audio-cds>
Thank you!
No problem, hang around and read a few posts, there's always plenty to learn in here.
Regards,
Colin R.

Stopping a recording after each track

I have an odd request...Is there any way to stop a recording after each track? Such that there are three tracks on a recording, after each track I would like the CD to stop. After it has stopped, I would like to be able to push play and move to the next track. That is, I put the CD in the player, push play, the CD plays track 1, and then stops; I push play again, and the CD begins playing track 2, and so on. I have Logic Pro and iTunes, which I have used to create the tracks and compile onto a CD. Using these can I create a CD with these parameters? Any advice would be helpful, and thanks in advance for your time.

Yilofall wrote:
I have an iPod Classic (I am fairly new to the medium) and when playing music the Pod goes smoothly from one song to the next but, when listening to a book (brought in from a CD copied into iTunes) it plays one track and stops.
See below for a link on how to copy a CD into iTunes if you want an Audibook.
I have tried checking the gap less album box (what is that for by the way) but it makes no difference.
If you've heard of Dark Side of The Moon by Pink Floyd then it's used there when you want no break between tracks. Or any DJ mixed continuos play CD. Or some classical music. Take your pick
Third question, can I make a book copied into iTunes an Audiobook? How?
[How to Import Audio CD audiobooks into iTunes|http://aldoblog.com/audiobooks/itunes/importing-audio-cds>
Thank you!
No problem, hang around and read a few posts, there's always plenty to learn in here.
Regards,
Colin R.

Ipod stops playing after each podcast

When I play music, each song plays one after the other like you expect. When I play my podcasts after each one the ipod stops and goes back to menu screen. How do I get it to play the podcasts one after the other like songs? Is this a setup item I missed? Thanks for any help.

The iPod does not use folders like you do in Windows or Mac OS. They are invisible to the user.
You are not explaining yourself very well or you have never used an iPod.
I don't understand how using folders will make it easier than it already is.
If everything is in folders and you do not use playlists, then you have to move everything around into folders to listen to specific music.
I never said playlists were cumbersome but they are sometimes ineffective. Some times you don't want a certain rating or a certain grouping but maybe you just want to listen to one album in order or one podcast.
So select that album or that one podcast and press play.
It's much easier to find that podcast or album by name then it is to scroll through thousands of entries to find the starting title of the group.
Why don't you do it this way now?
I go to
Music -> Albums -> pick one and play
Music -> Podcasts -> pick one and play
That's what the problem was last week I would go to artists choose the artist then the album and then it would play one song and skip to the top menu.
That seems to have been a glitch.
I go to Music -> Artist -> Album and press play. It plays the entire album with all the songs in album in order.
It did it for every album and every song I chose every day of the trip a couple weeks ago and yes they all have there check boxes selected in iTunes.
The check box is used only if you want to use Update only checked songs in iTunes prefs -> iPod. Once the songs are on the iPod, this option has nothing to do with th eiPod.

My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output. Mac book Pro Lion 16gb ram

My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output. Mac book Pro Lion 16gb ram. Can be any song, any time, same song will play if I select it again. Bit of a bummer itunes is the main thing I use (macbook pro jukebox).

Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
Best of luck
Terry

Stop after each track?

Is it possible to set the nano so after each song is played, it stops playing and won't go to the next song unless you press play again?

Selecting a single song MAY do this already. Just make sure "repeat" is turned off. But are you talking about from within a playlist, artist or album list? I think it will automatically advance to the next song.
Edited: I just tested it. The single song trick works only if there is one song from an album or artist. If the artist or album has more than one song on your iPod, this may not work.

Itues 11. How do you make Podcasts play continuously. Right now they stop after each selection

In iTunes 11 my podcasts stop after each selection. How do I play them continuosly as I was able to in iTunes 10?

I second this motion of shenannigans.
Upon updating to iTunes 11 I was unpleasantly surprised by the fact that my podcast smartlists no longer played continuously.
So,
Dear Apple, perhaps you want to fix the section on your website describing how to use a smartlist for continuity of podcast play, because it is not working as described http://www.apple.com/itunes/podcasts/.
and yes, I too would like to know what's going on and how to fix it.

Stopping tracks after each play

Similar Messages

Maybe you are looking for