Stops after printing first page and does print graphics, etc. on page
I am using WIN 7 64 bit, and until I got a new computer with this on it, my Photosmart 5580 worked fine. I bought the CD with the correct driver and software for WIN 7 from HP. However, when printing a web page, it leaves blank wherever a graph etc. should be and only prints the first page. I know somewhere there is a setting to print background, and maybe that got unchecked in putting in the new driver. I can't seem to find where to set that. I do not believe that would have anything to do with only printing one page when I have selected ALL. Thanks for any help anyone can give me.
MLJ
Hello there, Welcome to the Forums! I hope you enjoy your experience
I noticed your posts about the Alignment Failing on your Photosmart C4480 and would like to offer my suggestion. I understand you have done some troubleshooting already however, please check out the guide below and try any steps that you haven't yet attempted. It's worth a shot right? If the issue continues, I would then suggest calling HP to see if they have any replacement or trade in options for you. All of the info you will need is below!
An 'Alignment Failed' Error Message Displays on the Control Panel
If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
I hope my post was informational, thanks for posting in the community!
Have a great Tuesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!
Similar Messages
-
When Streaming a movie or tv show it stops after a short time and does not finish downloading. We watch the TV show or movie than nothing !!!
a message comes up An error occurred loading this content try again later. We have unplugged everything rebooted several times and nothing
helps. It was working fine until we did a upgrade that showed up on the Apple TV.
modle A1427 3rd generation
Any help would be GREATLY appreciated Nothing on regular TV miss my Apple TV stuff !!!!Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
Reset the Apple TV (Settings > General > Reset > Reset all settings)
Restore the Apple TV (Settings > General > Reset > Restore) -
HT203167 My iTunes Match does not work, it stops after the first step and won't do anything else!!!
Hello, I purchased iTunes Match for my new iPhone five and it is intended to move the music from my computer to my other computer, but it stopped working on my MacBook Pro, it stopped after the first step. So, my question is, can iTunes Match work if the iTunes in question has other accounts attached to it, of not, can I get a refund on a service that does not work?
I am having a similar issue with iTunes Match. It keeps hanging up on the same number of files (11035 of 15455) during STEP 2. I've tried signing out, re-opening iTunes, re-booting, etc. Still comesup stuck for hours. What I also don't understand is why the "iCloud Status" option in "View/View Options" disappears intermittently. It was there when I first booted up this morning and I reviewed all my music files to see if there were any "errors" and there werne't any. But after Match gets stuck on the same file niumber (11035) I 've signed out and re-booted and now the "iCloud Status" check box is missing from "View Options" (only the "iCloud Download" option remains present all the time. Please help. (I've also checked to make sure all the music files are within the suggested bit rate parameters and file type - This is also a brand new iMac out of the box). Running out of troubleshooting ideas and beginning to think this service just doesn't work well.
-
I have had FPCX since Sept, first used Oct. I have not had one 'movie' export properly, first time since using FPCX. Audio stops completely at some point and does not re-start. Any ideas, folks?
First, I suggest you limit the subject line of your question to a few words which will help someone identify the problem you are encountering. Putting the entire question there looks as though you are shouting.
It would help anyone to identify your problem if you were to say what video codec (file format) you are using, and describe the method you are using in your attempts to export it.
You could also list any relevant error messages you encounter.
What version of FCP X are you using?
All these things will make it easier for people to help you.
Andy -
when I play songs on my itunes account, they stop after about one minute and itunes goes on to the next song. This is happening with songs on albums I have purchased direclty through itunes
Assuming you are in a region where you are allowed to redownload your past music purchases, delete the broken files from your iTunes library, go to the iTunes Store home page, click on the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
If you don't see them straight away it may help to close and restart iTunes.
While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
See also: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
tt2 -
Help please. I cannt get itunes match to work. It just stops on the first step and the status bar continues to say "sending information to apple" for hours. Any ideas?
I am having a similar issue with iTunes Match. It keeps hanging up on the same number of files (11035 of 15455) during STEP 2. I've tried signing out, re-opening iTunes, re-booting, etc. Still comesup stuck for hours. What I also don't understand is why the "iCloud Status" option in "View/View Options" disappears intermittently. It was there when I first booted up this morning and I reviewed all my music files to see if there were any "errors" and there werne't any. But after Match gets stuck on the same file niumber (11035) I 've signed out and re-booted and now the "iCloud Status" check box is missing from "View Options" (only the "iCloud Download" option remains present all the time. Please help. (I've also checked to make sure all the music files are within the suggested bit rate parameters and file type - This is also a brand new iMac out of the box). Running out of troubleshooting ideas and beginning to think this service just doesn't work well.
-
installation of Flash stops after 30% complete, plugins and java are enabled in the browser and all browsers are closed.
Hi,
I'm assuming you're machine is OS X (please include this in the future, avoids assumptions). Are you using anti-virus software, if so, if you stop/exit the anti-virus software, does the installation proceed?
If not, or if the installation still does not proceed after stopping the anti-virus software, please try the offline installer, posted at the bottom of the Installation problems | Flash Player | Macpage, in the 'Still having problems' section.
Maria -
Basically I want to combine to clips with correct timings. For that I want to view the two clips overlapping each other, each being semitransparent to see both at the same time, so that I can decide where to stop of the first clip and start of the second clip? Thanks.
see my reply in your other post:
You're familiar with the TRIM-tool?
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632caff
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632d8e4
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632d9ae -
As soon as I plug my iphone4 (running 4.3.3) into my pc, it appears in the left hand column and the little wheel starts turning. Then it stops after a few seconds and itunes freezes. I have tried everything. Can anyone help. Thanks
Hi Patrick,
Yes, a very frusterating issue indeed. Someone else had mentioned a possible issue with real player, I tried getting rid of that and same issues. I even got completely rid of firefox for the moment. Guess what, problem still is persisting. I think this means it maybe something else altogether. I will go back to re-add firefox after I get this straightened out but now using Chrome for the moment.
What I've also found out is that the sound can be restarted when I unplug and replug in the 3.5mm speaker cable from the audio output jack on the back of the computer. Any ideas?
Thanks! -
Ipad2, I can not sign in to imessage after turning it off and doing a hard reboot. Upon entering my info it states no network connection, but I can use it o surf in Safari and iter websites. Any suggestions. Went on with Apple, they think its my network. All other wireless equipment can ign on without problems. This happened after I turned imessage off.
Step by step, how did you arrive at seeing this agreement?
-
Wireless printing through Airport Express stops after a few pages
I have a Canon MP780, which I tried hooking up to my Airport Express USB. Installation seemed to work smoothly with the Airport Utility, and it printed a test page just fine. However, when I printed a longer document, something kacked after a few pages (a communications error).
Hooking it up is a hassle (have to go through a wall to get to the AE/DSL modem setup), and I ripped it apart after upgrading the canon drivers to no avail. I'll try it again to get the exact error messages if there's more than a snowballs chance in hades that this might work, but thought I'd at least find out if it's hopeless or not before throwing more time at this.
Any help's appreciated... many thanks.There has been similar posts on this forum regarding wireless stability. A few have indicated that there printing was fine until the recent Airport Client Update 2009-002. If you check your System Prefs > Software Update > Installed Software list, have you also run this update?
Pahu -
Airplay STOPS after printing on G Express
I just installed a Samsung ML-2010 to a G based Airport Express in WDS bridge mode. For some reason, the native ML-2010 print drivers do not work, but the ML-1630 driver does work. If I am playing audio through the Airport Express and decide to print, once the print data reaches the express, the audio stops and does not return until I either power cycle the Express or go into Airport Utility and disable Airplay, wait for a reboot, then re enable Airplay, and wait another reboot. If I print from a Windows PC using the ML-1630 driver through Bonjour, the audio does NOT stop when printing, only on the Mac (iBook G4 10.5.8) is it failing. I tried 2 Airport Express units and both fail the same.
I can only think it is the Mac print driver, but wanted to see if anyone else had a similar experience.
Thanks in advanceHi dmule, I just replied to another topic here about this, I know you were involved in it but just in case you don't get notified I thought I should cross-link it here.
Cheers
Ollie -
For loop stops iterating at first page
I have a loop that applies a paragraph style but it stops iterating at the first page of the document.
I need it to apply the style to the entire document...can't figure out why this isn't working.
Here is my script:
var myDocument = app.activeDocument;
var myParagraphStyle = myDocument.paragraphStyles.item("Paragraph Style");
myDocument.pages.item(0).textFrames.item(0).paragraphs.item(0).appliedParagraphStyle = myParagraphStyle;
var paragraphs = myDocument.pages.item(0).textFrames.item(0).paragraphs
for( i = 0; i < paragraphs.length; i++)
var paragraph = paragraphs.item(i)
paragraph.applyParagraphStyle(myParagraphStyle, true);
Thank youmyDocument.pages.item(0).textFrames.item(0).paragraphs.item(0).applied ParagraphStyle = myParagraphStyle;
Why do you have this line, when you iterate through the paragraphs later? (BTW: between "applied" and "ParagraphStyle" is a space)
But I think the problem is that you forgot two semicolon here:
var paragraphs = myDocument.pages.item(0).textFrames.item(0).paragraphs
(BTW: you should also call it "var myParagraphs ..." or something like that.)
and here:
var paragraph = paragraphs.item(i) -
Can't see my PDF after the first page when i put the security on!
i have a PDF file protected by password that cause me problems.
If i put security by password on this PDF, and i look at the infos, i found : Encrypted with Acrobat Distiller 9.2.0
But if i don't secure it by password, i got Adobe Distiller.
But the real problem, with security, when i try to see my PDF on a website, il looks like this
If i don't put the security, it is ok, i can see the other pages. In my example, all what you see is the end of the first page, on 30 pages.
Am i the only person with this problem? I'm looking for another version of my acrobat to see if the "distiller" is the same and if i'll get the problem again.
ThanksMoving to Acrobat forum.
-
Workflow does not stop after the first reject
Hi!
We just got a 30-day Microsoft 365 trial at work in which we also received a Share site! I've been playing around with it a lot, especially to help them build an approval process. I believe since this is just a trial, I do not get the globally reusable Approval
Workflow. So I tried creating a new workflow attached to a list I created.
In this process, when the list is submitted, it needs to be approved by 2 people sequentially - John Doe & then Billy Bob.
When I create a new workflow, I click on actions and select "Start Approval Process". After doing that, it populates Step 1 with the following line - Start Approval process on Current Item with these users. I clicked on "these users" link and added the approvers
in sequences - John Doe, then Billy Bob.
I saved the workflow, checked for any errors and published the workflow. While testing with this workflow, I realized that when John Doe rejects the process, the task is still assigned to Billy Bob when it is actually suppose to stop.
How can I stop this workflow right after John Doe rejects the process?
Any help will be appreciated!Hi whocareswhoiam,
Please post your question to Office 365 forums for quick reply. Below is the link.
http://community.office365.com/en-us/f/default.aspx
Thanks for your understanding.
Best regards,
Emir
Maybe you are looking for
-
When I search my hard drive to find space for freeing up memory I have a lot of files for Apps, and music. I am wondering if these are pertinant and need to be kept on my hard drive, or if I can remove them in any way. Any help would be appreciated.
-
Audio Books Not Resuming / Ipod locks if exit Music after 2.2.1 Upgrade
Hello, I have a 1G 16GB Ipod Touch, and have been running 1.1.4 for the past year until about a week ago when I took the plunge and upgraded to 2.2.1. I thought all went well, but have been experiencing multiple problems as my use of the Ipod expands
-
Sync JDBC call from ParForEach block in BPM (XI 3.0)
Has anyone tried the following scenario: My BPM flow starts with a single message that I split using a message map into a list of messages to be sent synchronously to an Oracle stored procedure via the JDBC adapter. After the mapping step, the flow
-
CUCM to CVP calls. CTI-RP vs Route Pattern
CVP 9 or above CUCM 9 or above Requirement: 1. Consultive Warm Transfer - The agents to be able to transfer calls to a a different department by dialing an internal number and wait in the queue until answered. 2. Internal - Back-office people to dial
-
Streaming from Shared USB storage to Ipad
Hi Everybody, Is it possible to connect a harddrive to a wifi router such as a netgear r7000 and stream video content to multiple ipad users? Basically the router would need to be a stand alone unit not connected to the internet and solely for stream