Stops working when connecting to previous purchases

When I attempt to connect to "download previous purchases" Itunes stops working Windows 7

COPY QTMovieWin.dll FROM c:\program files (x86)\common files\apple\apple application support\ INTO c:\program files (x86)/iTunes"

Similar Messages

Internet stopped working when connected to Cisco VPN

Hi,
I have configured IPSec (Ikev1) Remote access VPN in ASA 5520, VPN is connecting properly and i am able to access all internal resources but Internet is not working when connected to VPN. I have investigated on this and found problem with the default gateway, i am getting ddefault gateway duringVPN connection. I am surprised in ASA there is no default gateway configured for remote VPN IP pool then how remote clients can get default gateway.
I am describing my problem in below given image Please help me to shootout it.
Thanks in advanve.

Hi,
The top configurations is specified to Tunnel All traffic as you can see from the "split-tunnel-policy tunneall". In this case the Split Tunnel ACL is ignored to my understanding.
The bottom configuration is specified to use Split Tunnel but I cant see the ACL specified there.
To my understanding you should be seeing routes on your actual computers routing table for the networks that are reached through the VPN.
On a Windows machine you can open the command prompt and issue the command "route print" to view the routes
Here is an example when I am connected to one Split Tunnel VPN (click to enlarge)
To my understanding there is no default gateway in the virtual VPN interface configurations as the host forward all the traffic that needs to be tunneled to the actual virtual interface and from there on in it heads through the VPN Connection.
Here is an example what the VPN Client Statistics/Route Details tells me
Both Internet and the remote network/host behind the VPN connection can be reached.
What does the above window show for you in your VPN Client when active?
- Jouni

ITunes has stopped working when connecting new iPhone 6

I am getting what seems to be a common error "iTunes has stopped working" which I have tried many different tricks for fixing that I have found online, but nothing seems to work.
I have been using an iPhone 5 and backing up and syncing with no problems, the only problem being when I try to access the iTunes Store. This didn't bother me too much as I can access the store on my phone and everything else on iTunes worked fine.
But today I bought an iPhone 6 and as soon as I connect it (whether iTunes is already open or opens when I plug the iPhone in) I get the above error message and iTunes closes. So I am unable to sync my back up on to the new phone or use it at all.
Can anyone help with a recent fix for this, or a way around it?
I have tried copying recommended files into the correct folder, re-installing, opening as administrator and many other things I have come across online, but majority of these seem to be from a year or more ago. I am using Windows 7 on a PC, with the latest iTunes that I have just re-installed (again).
Any help would be really appreciated!

Same here....also when I restart iTunes afterward, all my devices don't even show up in iTunes at all until after you restart the computer
Even then, the problem persists. And I've tried all kinds of troubleshooting techniques

ITunes stop working when connecting ipod 4th generation on Vista

When connecting ipod 4th generation to a computer running Vista Ultimate, ITunes (version 8) closes. Windows provide the following message - iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
Thanks!

i have the same issue... but i found a workaround.. i tried 3 diff OS's . didnt change the problem. To Add apps or music to ur Ipod... simply DISCONNECT the Ipod from the PC then add files/folders to library. Then connect the ipod back to PC and sync. it has no problem adding the files that way (at least in my case) I hope this helps... Good Luck =)

ITunes stops working when connecting to store. Solutions?

When attempting to conect to iTunes store a message appears "iTunes has stopped working" and it shuts down. I have updated and re-installed latest version and still I can't connect. All else within iTunes seems to work fine. I have Windows8.
I see many others have had similar issues but I haven't seen any solutions.
Anyone have any idea's?

COPY QTMovieWin.dll FROM c:\program files (x86)\common files\apple\apple application support\ INTO c:\program files (x86)/iTunes"

Itunes stops working when connecting to itunes store

I just accepted an upgrade to itunes today and since then I can open itunes, but the moment I try to connect to the itunes store it stops working and is closed by Windows. I have unistalled itunes and all linked software and reinstalled, but to no avail!!

Courtesy of another user, and because the Devs are useless, I'm copy/pasting the fix from another thread that only iTunes users figured out
"DonInDassel Minnesota
Re: itunes 11 crashes when accessing the itunes store
Sep 25, 2013 7:21 PM (in response to DonInDassel)
OK - here's the fix! If you are running iTunes 11 on Windows 8 and iTunes crashes when you go to the iTunes store, you just need to copy a dll file:
Dopying the QTMovieWin.dll from c:\program files (x86)\common files\apple\apple application support\ INTO c:\program files (x86)/iTunes"

"Itunes has stopped working" when attempting to play purchased video

I have purchased multiple episodes of The Vampire Diaries from Itunes, to which I have already watched. But when I went back to watch them again, it gave me the error "itunes has stopped working". To which, itunes started up again. I tried to click it again, and got the same error message. I have a windows vista. and this problem is really making me mad. Anyone know how to fix this?

I am also having this problem and from the looks of it I'm going to have to sit back(unfortunatly) for an answere to get back to me.
I feel the same frustration as you Krazybald, I've been wanting all day to watch a movie from my purchased movies and cannot.

Hyper v manager: "virtual machine connection has stopped working", when connect to VM

Hello,
cannot find any info on web and View problem details in VIRTUAL MACHINE CONNECTION error box:
"virtual machine connection has stopped working".
I get this error when click Connect in HV Manager. The machines are on and are accessible through RDP.
This is a lab host after restart it randomly works. I have this problem during last week.
Just interesting to know what could cause the problem and if other were seeing something like that...
Also, can connect to machine from SCVMM.
Thx.
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

I have the same problem.. Running hyper-v manager from win7 x64 client...
Problem details:
Description:
Stopped working
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: vmconnect.exe
Problem Signature 02: 6.1.0.0
Problem Signature 03: 4ce75fbd
Problem Signature 04: vmconnect
Problem Signature 05: 6.1.0.0
Problem Signature 06: 4ce75fbd
Problem Signature 07: 107
Problem Signature 08: 29
Problem Signature 09: System.ArgumentException
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 1033
I have the exact same issue (running windows 2008 R2 Enterprise). I can RDP to any of the VM but simply cannot connect using console. This is causing me grief since I have to create few more VMs and work with the existing VMs. Without console
access, I cannot create and do any config changes for new VMs. Can someone help. Things that I have tried so far.
1. Exported VMs
2 uninstalled .NET 4 & 3.5.
3. Hyper-v role removed.
4. Reinstalled Hyper-v, reinstalled .NET 4 & 3.5, patch current as of today.
5. Imported the VMs back and still cannot connect. Exactly same error. No errors in any logs in event viewer or Hyper-v logs.
6. Navigated to c:\Program Files\Hyper-v and manually run the VMCONNECT.EXE app (choosing the localhost/server and appropriate VM from the list) but no dice. The app just sits there for ever without any connection.
7. I am baffled and surprised no one has a solution. Tried multiple search engines.
8. The host machine is patch current as of today and there are no patches available to try. Reading through some forums, I have also installed some hotfixes with no luck.
9. Finally, I can see the little graphic for each VM changing as windows is loading or stopping in server manager for hyper-v.
Hoping someone has a solution. The error that pops up is exactly similar and no clues of the faulting module.
Appreciate your time and help.

RH has stopped working when connecting to source control

I have one RH 10 project that connects to TFS for source control. Starting this morning, I get the "Adobe RoboHelp 10 has stopped working. A problem caused the program to stop working correctly" error when I use the Open Project from Version Control icon. The project opens fine if I do it directly from my PC. This is not happening with any other project connected to TFS. Is there a file in the root directory that is corrupted that I can delete?

In that case it means finding out what is going wrong.
First off, will the project work without source control? Make a copy of the project, trash the CPD and remove the link to source control (See October 2004 - Banishing the sorcery) and open the project. Same problem?
The way I would try to find the problem: Create an new project, import some 50 topics from the old, close the project and reopen it again. As soon as RoboHelp starts crashing, you know in which batch the faulty file is located. Finetune untill you find the culprit and fix it.

ITunes stops working when trying to play purchased video

Hey Everyone,
For some reason whenever I try to play a video or TV program that I purchased from the iTunes store it causes iTunes to shut down and it won't play the video. It does bring up the player for a few seconds then just hangs and a few seconds later it pops up a message that iTunes has stopped working. HELP PLEASE. I'm on 7 64 bit.
thanks

many thanks.
Fault Module Name: QuickTime.qts
Fault Module Version: 7.66.71.0
Okay. let's first try uninstalling and reinstalling your QuickTime. We'll also take a few other explicit precautions, just in case. Best to print out a copy of these instructions, because at one stage of proceedings you won't be able to use a web browser.
Preliminaries
Download and save a copy of the QuickTimeInstaller.exe file from the Apple Website. (Don't run the install on line and don't start the install just yet. get the installer that doesn't mention iTunes.)
http://www.apple.com/quicktime/download/
*Uninstall phase*
Head into your Uninstall a program control panel and uninstall QuickTime.
Next, we'll remove any leftover program files and folders.
In Computer, open your C drive.
Open the "Program Files (x86)" folder.
Right-click on the "QuickTime" folder (if it still exists) and select "Delete".
Go back into your C drive (or whichever drive your operating system is installed on).
Open the "Windows" folder.
Open the "SysWOW64" folder.
Right-click on the "QuickTime" file (if it still exists) and select "Delete".
Right-click on the "QuickTimeVR" file (if it still exists) and select "Delete".
Empty your recycle bin.
*Reinstall phase*
Restart the PC. After the PC restarts do not open any applications. Disconnect from your network and/or the internet. Now switch off all your security software (firewall, antivirus, antispyware).
Now start the reinstall by doubleclicking the QuickTimeInstaller.exe file you downloaded earlier.
Reenable all security software prior to reconnecting to the internet and/or your network.
Does the QuickTime reinstall seem to go through smoothly? If so, try launching iTunes again and trying to play one of the affected videos. Do you still get the same iTunes error, or are the files playing properly now?

Reminder app stop working when connecting it to iCloud

The reminder app suddenly stopped working. I can start the app but it doesn´t show any reminder list. I´m not able to show the main window with ⌘+0. This first happened to me under Mountain Lion. After upgrading to Mavericks everything seemed fine again and worked flawlessly. After a couple of weeks the same problem occured again. The only solution I have come up with yet is do disconnect Reminder app from iCloud reminders. After doing that I can start the app again it seems to work fine, without the reminders in iCloud though. I have tried to reinstall Mavericks but with no luck. Is there any solution for this problem available or is this a know bug which will be corrected anytime soon? I use the Reminder app all day at work so now this is very frustrating to me not being able to trust this app.

Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library/com.apple.quicktimeplayer.plist. Then go to Preferences. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

"iTunes has stopped working" when trying to download purchase

I have Windows 7. This is the first time I have downloaded on this brand new computer. I authorized this computer for iTunes and bought an album. It shows in my downloads, starts downloading, and when it gets to the end of a song, I get the message "iTunes has stopped working" and choices to close or debug, etc. I have tried this a bunch of times, and each time it says there are less songs to download, but my songs never appear in my music.
thanks for any help....

It shows in my downloads, starts downloading, and when it gets to the end of a song, I get the message "iTunes has stopped working" and choices to close or debug, etc.
Head into your Problem Reports and Solutions control panel (or the Windows 7 equivalent) and open your Problem History. Look for iTunes Problems reports that seemed to occur at the time that you had the Store troubles.
Open the reports and have a look through them. Do they all seem to say the same thing? If so, paste the contents of a typical report into a reply here. (Fingers crossed, that may give us a heads up on the cause of the errors.)

Apple TV optical Audio stops working when connected to switch

Hi everyone,
I'm installing a brand new Apple TV in the following setup:
Apple TV (is up to date)
- HDMI to HD Beamer
- Optical Audio to Sonos Playbar (Works instantly)
- Optical audio through switch to Sonos Playbar which doesn't work
UPC Box
- HDMI to HD Beamer
- Optical audio to switch to Sonos Playbar (Works instantly)
I've tested all the ports on the switch and cables already and they all work. So the weird thing is when I connect the optical from Sonos directly to the Apple TV it works perfect. But when I use the switch it doesn't work. I see a light in the switch so there should be signal...
The switch I'm using is:
http://www.allekabels.nl/optische-kabels/5/1424/optische-schakelaar.html
I've read older questions and tried different audio settings but nothing seems to work. Can anybody help me?

so i solved my own problem haha here's what i did incase anyone has the same issue
go to system preferences > sound > output > click on headphones then turn the volume up from mute
for some reason every time i reconnect to the uni wifi it goes back to mute. not the regular volume only the one through that pathway.

I needed to install a previously purchased CS6 versus on new computer. To do this, I had to download a version from CC. I will not be using CC. How do I activate Photoshop under my license so that it does not stop working when I am out of communication ra

I needed to install a previously purchased CS6 versus on new computer. To do this, I had to download a version from CC. I will not be using CC. How do I activate Photoshop under my license so that it does not stop working when I am out of communication range a month from now?

The CC version will not activate with your perpetual CS6 license. Download the version from here:
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
Your number should work with this version.

Hi Team, Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will st

Hi Team,
Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will stuck on enabling
and will not renable till i am not restart that machine. I have 350 Machine in network but facing this issue in 25 machines. Kindly help me on this issue .
Regards
Sahil bhateja

Hi，
So switch a LAN card fix this issue...seems a compatibility issue or maybe some packs or programs you installed recently cause this issue.
Have you manually check the network adapter driver from the PC's manufacture website? sometimes, it will be a time delay before Microsoft push out the driver update.
Check if issue exists in safemode with network, this mode will launch Windows with limited sets of files and drivers.
if you have a restore point, restore the pc to a previous point at which the pc is functioning fine.
Yolanda Zhu
TechNet Community Support

Stops working when connecting to previous purchases

Similar Messages

Maybe you are looking for