Stor.E TV+ file copy problems

I have a Stor.E TV+ 2 tb and I have had problems copying files using the on-board system and copying from a USB stick or external HDD.
Some file show as invalid.
I have discovered that this does not happen or at least happens less if I connect via USB and copy from a PC.
Has anybody else noticed this and is there a solution.

As for the Samba problem, this firmware upgrade does not solve the problem of large file transfers. Not sure actually what this software upgrade does improve as I have not noticed any material difference in performance (or shall I say non-performance). There is no information either from Toshiba on this. For copying large files, use the Microsoft RichCopy utility which you can download free from their web-site. It has the added benefit that it manages the copying process and retries in case of any dropouts.
Message was edited by: fuddrocks
Please note that the above applies to copying large files across a network, not internal copying from a USB or disk.
Message was edited by: fuddrocks
In case of copied files not showing up on Toshiba screen even though they are visible on a remote PC, this could be due to the file being an unsupported type (e.g. I think .ape is a problem) or the file extension is incorrect (e.g. .fla instead of .flac). In first case use Audio Converter s/w to convert files to supported audio format or, in second case, use File Renamer s/w to correct the extension.

Similar Messages

File copying problems

Copying some files using the Finder results in a dialogue box error message: "The Finder cannot complete the opeeration because some data in +(file name)+ could not be read or written. (Error code -36). The same files copy without error when using SilverKeeper (v.2.0.2) backup program.
I am also experiencing a problem when quitting SIlverKeeper. A second or so after selecting Quit, and after the program has actually quit, a system dialogue box appears saying that the program has unexpectedly quit and offering choices of Reopen, Report to Apple or Close.
The system also seems somewhat sluggish.
Can anyone offer suggestions?

Hi John, At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
Disconnect the USB cable from any UPS so the system doesn't shut down in the middle of the process.

Quad G5 Lg. File Copy Problems

If I do a multi gig file copy between LaCie Firewire 800's - things go well for a couple of minutes then the copy stalls -- IO drops to zero and CPU drops to almsot zero. The copy process stops. Sits this way for a minute or two then takes of again at 35megs/second for 30 seconds or so - then drops to zero again for a few minutes...... It took me almost all day to copy 500 gigs.
I had installed a 460meg internal drive but this seems to be happy.
A 6 gig copy from the Apple internal to the ext. firewire has the same stalling problem.
A copy between the internals - no problems - continuous @ 45 megs/second.
This implies that there maybe an issue on the firewire bus ot the LaCies - is there a way to check this? Any reports of similar issues?
Any insights would be appreciated.
Hugh Evans

I have lost over 5 LaCie Firewire 800 drives this year at my studio. They are THE WORST. I know so many people in the Austin video community that have had these drives fail.
Back it up however you can, ASAP!
-steven

DVD digital file copy problems

First question- When downloading a DVD "digital file" through Itunes, is the movie actually downloaded from the disc in the drive, or from the Itunes libray?
Second question- How long should it take to download?
Third question- Where the heck is my movie?
Fourth question- How can I contact Itunes directly?
Here is the rundown:
I signed uo for Itunes today to upload my "Disney file" digital copy to my mp3 player. Well, that has created some problems. All was going smoothly, or so I thought. Itunes took the activation code (as a form of payment basically) and I got confirmation that the movie was being downloaded to my Itunes account. It was taking a long, long time to download and I was not sure if the movie was being downloaded from the disc that Disney provided, or if it was being downloaded from the Itunes libray, so I ended up taking the disc out of the drive to see what would happen. (I hope I didn't mess things up for myself!)
I waited a bit longer and reinserted the disc and tried the activation code again, and as I suspected the code was denied, so it wouldn't attempt to download again.
It has been a few hours and my movie is nowhere to be found on my Itunes account. Being new to the whole Itunes thing I wonder if I did something wrong, or if I am not looking in the right place.
I really hope I didn't make a big mistake!!

I did this with the Family Guy "Blue Harvest" digital copy, and it (entering the code and 'purchasing') only authorizes playback of the content from the disc in the drive. Other than cookies, there is no download from the iTunes store. The software treats the copying from the disc as a download though, and it shows copy progress as download progress. That threw me off the first time I did it.

Error 36 and External Drive File Copy Problem & USB Connections

In attempting to copy a folder with some 200G+ of files from my iMAC, with OSX 10.6.7, to an external portable WD 1Tb HD, newly formatted to HFS+ (journaled), and connected to the iMAC via a USB cable to the USB port on the iMAC keyboard, I kept getting an error message that Finder could not complete the operation as some data couild not be read or written and transfered, and gave the "Error Code -36". After some searching ont he internet for this error code I came across a host forums discussiong the error code BUT all referred to it being the result of MAC OS hidden "dot-underscore" companioned files being created when the MAC OS X file system copies or moves files to a FAT16 or FAT32 volume. This was not the situaion in my case a both drives were OS X formatted HFS+. Eventually I came across a very vague reference to the error also occuring when the cable connection with the external HD was not solid. I reconnected my external HD and attempted the file transfer again - with the same result. Eventually I decided to plug the external HD into a USB pot on the back of the iMA itself, rather than the keyboard set. Sure enough the error issue disappeared - the transfer successfully completed.
So my question relates to the "usb connection" challenge with iMAC. the iMAC has only 4 USB ports on the back directly. I did have two desktop external HDs plugged into 2 of these USB ports at the back of the iMAC, as well as a WACOM pad device into the 3rd, and an EPSON 3880 printer into the 4th, and so was forced to employ the ports ont he keyboard for portable HD. So - what's the answer in a situation where the 4 are insufficient and it would appear that the keyboard ports seemed to be unpowered?? Any suggestions?

It's actually a Time Machine backup drive which is formatted in Mac OS Extended (Journaled). I wish I'd copied the exact error message.
I believe it was something to the effect of "Error 36: The file could not be copied because some of the date could be be read/written" or something along those lines. Next time it comes up I'll copy it. I have Drive Genius running with DrivePulse, but it doesn't ever seem to start.
My biggest concern is that this is a sign that the drive is failing. When backing up, it also slows, or stops midway through and just hangs there. Though I haven't done a lot of extensive testing on that because if the drive is failing, I don't want to speed that process up any more.
To add to the complication, there is a second external drive which Time Machine is also backing up for me. There is one particular file, the Virtual Machine file, I was trying to get off the other external drive and it produced the same problem. That's when I went into Time Machine to try and retrieve the file that way and it did the same thing. The other external drive is making some sounds, but it doesn't sound like a distinct clicking, more like a more pronounced version of the normal constipated hard-drive sound. The Time Machine drive, isn't making any obviously strange sounds at all.
So, I can't tell whether the drives are failing or if it could actually be that particular file itself causing some strange problems.

File copy problem

hi
my program have a problem .in this .i cannot rename the exicting file .and cannot copy . please explain why abd please reply me as soon as possible .
thanks

my program have a problem .in this
.i cannot rename the exicting file .and
cannot copy .The cause can be various issues. Can you give more information, like what's the error message, the OS you're using, the code you've used, etc.

Weird File-copying problem

This problem is only happening on one computer on the network. When copying some files to the Mac server, they do not fully copy. Then, when we try to delete the file on the server, it responds that the file is "in use".
Wiring ruled out as the issue.
***?

Hi nogeeks, and a warm welcome to the forums!
Not much to go on, but one thing to check...
In finder, select Go menu>Go to Folder, and go to "/volumes".
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1, and reboot.

File copy problems with very long DVD/CD names

I can't copy any file from a very long named DVD to the desktop or any other part of the hd. Is there any way to solve it?
Thanks in advance.

Thanks again, Malcolm. I did try the disk image file from the DVD before asking in the forum and yes, it works but I was looking for a faster solution. It seems stupid that apple doesn't fix the bug that remains in leopard.
I'll try with other user account but it seems to me a bit tiresome. I'm used to use one only account in my personal computer.
Thank you very much for your help.
Meanwhile I'm still waiting for an easy solution if any.

Problem with UTL FILE COPY

Hi,
I am facing one small problem in UTL FILE COPY package. We have an automated scheduled batch process. As a daily batch process it moves the files from one folder to other. During movement, it first copies the file from source folder to destination folder using FILE COPY package and then removes the file using FILE REMOVE package from the source folder.
Few cases are found that the file when files are copied they are copied as 0 bytes in destination folder but the source file had 1 MB file size. The interesting part is I am unable to replicate the issue. Means when i try to run once again the package its working properly and files are copied with correct size. This kind is issue is occuring very rarely though as once in month but the question is why FILE_COPY package is not working properly sometimes.. I am unable to understand.
Thanks a lot for going through this. Any suggestions.
Regards,
Ashish

Anyhow make sure that the copy will start after the full generation of files.
You can think like a spool file generation with huge data. In that case initially spool file available with 0 byte only. After finish of query only it shows its actual size.

CE71SR5 install failure (Start SAP Secure Store in the File System)

Hi!
when i install CE71SR5 CompositionPlatform,met a question, below is the log information, waiting help,thanks.
An error occurred while processing service SAP NetWeaver CE Developer Edition > SAP NetWeaver CE Development System( Last error reported by the step :Cannot create the secure store. SOLUTION: See output of log file SecureStoreCreate.log: INFO: Loading tool launcher... INFO: [OS: Windows XP] [VM vendor: SAP AG] [VM version: 5.1.021] [VM type: SAP Java Server VM] INFO: Main class to start: "com.sap.security.core.server.secstorefs.SecStoreFS" INFO: Loading 8 JAR files: [C:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_jce.jar, C:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_jsse.jar, C:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_smime.jar, C:\usr\sap\CE1\SYS\global\security\lib\tools\iaik_ssl.jar, C:\usr\sap\CE1\SYS\global\security\lib\tools\w3c_http.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcexceptionimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcloggingjavaimpl.jar, C:\Program Files\sapinst_instdir\CE71_DEV_ADA\INSTALL\install\lib\sap.comtcsecsecstorefsjavacore.jar] INFO: Start SAP Secure Store in the File System - Copyright (c) 2003 SAP AG FATAL: Main class "com.sap.security.core.server.secstorefs.SecStoreFS" cannot be started: java.lang.ExceptionInInitializerError at javax.crypto.Cipher.getInstance(DashoA12275) at javax.crypto.Cipher.getInstance(DashoA12275) at iaik.security.provider.IAIK.a(Unknown Source) at iaik.security.provider.IAIK.addAsJDK14Provider(Unknown Source) at iaik.security.provider.IAIK.addAsJDK14Provider(Unknown Source) at com.sap.security.core.server.secstorefs.Crypt. (Crypt.java:85) at com.sap.security.core.server.secstorefs.SecStoreFS.setSID(SecStoreFS.java:175) at com.sap.security.core.server.secstorefs.SecStoreFS.handleCreate(SecStoreFS.java:836) at com.sap.security.core.server.secstorefs.SecStoreFS.main(SecStoreFS.java:1306) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161) Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs at javax.crypto.SunJCE_b. (DashoA12275) ... 14 more Caused by: java.lang.SecurityException: Cannot locate policy or framework files! at javax.crypto.SunJCE_b.i(DashoA12275) at javax.crypto.SunJCE_b.g(DashoA12275) at javax.crypto.SunJCE_r.run(DashoA12275) at java.security.AccessController.doPrivileged(Native Method) ... 15 more FATAL: com.sap.engine.offline.OfflineToolStart will abort now with exitcode 2.). You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/CE71_DEV_ADA/INSTALL.

I have the same problem.
Although i try it use jdk1.5.0.16, the same err occured.
Also i use the jce_policy-1_5_0.zip.
I will appreciate your answer.
I have resolved the problem by copy the
local_policy.jar
US_export_policy.jar
to
sapinst_instdir\CE71_DEV_ADA\INSTALL\sapjvm\sapjvm_5\jre\lib\security
Edited by: wang zhen on Aug 28, 2008 11:08 AM
Edited by: wang zhen on Aug 29, 2008 9:53 AM

2006 iMac running OS10.7.5 with File Vault problem stops boot up?

2006 iMac running OS10.7.5 with File Vault problem stops boot up? Upon login this message appears: Your home folder, which is protected by File Vault, didn't open. it needs to be repaired.
It then asks: To repair the folder and continue logging in press OK. To log in as a different user, click Cancel login.
Clicking Ok
You are unable to log in to the user account "xxxxxxxxxxx" at this time.
Logging in to this account failed because an error occurred.
When I click cancel to log in as different user I get he following message: You are unable to log in to the user account "xxxxxxxxxxx" at this time.
Logging in to this account failed because an error occurred.

This condition is quite difficult and time-consuming to recover from. If the procedure suggested here is too complicated for your experience level, get help from someone more experienced. One option is to make a "Genius" appointment at an Apple Store. Legacy FileVault should not be used under OS X 10.7 or later.
If you have another user account with administrator status and can do so, log in to it and skip to Step 4.
Step 1
Boot into Recovery mode. The OS X Utilities screen will appear.
Step 2
Select
Utilities ▹ Terminal
from the menu bar. In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Select your boot volume if not already selected. Pull down the menu labeled Select the user account and select
System Administrator (root)
Follow the prompts to set a password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
Step 3
At the login screen, click Other... Enter "root" (without the quotes) in the Name field, and enter the password you set in Step 4 in the Password field. You should now be logged in. Do nothing while logged in as root except as indicated below.
Open the Users & Groups preference pane. Create a new user and check the box marked
Allow user to administer this computer
Restart and log in as the new user.
Step 4
Load this web page in Safari.
Triple-click anywhere in the line below to select it:
sudo dscl . -delete users/fubar HomeDirectory
Copy the selected text to the Clipboard (command-C).
Launch the TextEdit application. Paste into the window (command-V). Substitute the short name of the FileVault user for the word "fubar".
Triple-click the edited line and again copy to the Clipboard.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window. When prompted, enter the password of the user you're logged in as.
Step 5
You should now be able to log out and log in as the FileVault user. Your files still won't be available. FileVault is inactive.
Locate the disk image file named "fubar.sparsebundle" or "fubar.sparseimage" at the top level of your home folder. Again, substitute the short user name for "fubar".
Step 6
Try to open the file. If it won't open, try to repair it in Disk Utility. If it still won't open, restore it from your most recent backup. Keep trying older backups until you find one that works. If you don't have a backup, the data is lost, perhaps beyond any hope of recovery. There's a slight chance that you might be able to repair the disk image using an expensive third-party application called "Disk Warrior."
Step 7
Copy the files from the mounted disk image to the corresponding subfolders of your home folder. The Library folder is invisible in the Finder. Open it by holding down the option key and selecting
Go ▹ Library
from the Finder menu bar. Open the copy on the disk image by selecting
Go ▹ Go to Folder
and entering
/Volumes/fubar/Library
in the text box that opens. Again, substitute the correct name for "fubar".
Log out and log back in.
If there isn't enough disk space available to complete this step, unmount the disk image, copy the disk image file to an external storage device, delete the original, and try again.
Step 8
Back up all data, then delete the disk image file.
Step 9
Delete the user you created in Step 3, if applicable.
Step 10 (optional, but recommended)
Follow the instructions in this support article under the heading "Disable the root user."

File Copy times

My newsreader is acting funny and dropping posted messages, so I
apologize if this shows up twice.
My comments on the file speed are that the times posted by other just go
to show how difficult it sometimes is to make good timing measurements.
I suspect that the wide variations being posted are in large part to
disk caching. To measure this, you should either flush the caches each
time or run them multiple times to make sure that the cache affects them
more equally.
Here is what I'd expect. The LV file I/O is a thin layer built upon the
OS file I/O. Any program using file I/O will see that smaller writes
have somewhat more overhead than a few large writes. However, at some
size, either LV or the OS will break the larger writes into smaller
ones. The file I/O functions in general will be slower to read and
write contents than making a file copy using the copy node or move node.
Sorry if I can't be more specific, but if you have a task that
seems way to slow, please send it to technical support and report a
performance problem. If we can find a better implementation, we will
try to integrate it.
Greg McKaskle

Maybe this is because of the write buffer?
Try mounting the media using the -o sync option to have data written immediately.

How to measure progress of file copy?

One of the requirements for my AIR application is to copy
large files from one location to another on the client computer.
I've been using the copyToAsync() method in AIR, but unfortunately
this does not trigger progress events. Copying gigabyte files that
take several seconds becomes pretty uncomfortable for users, when
they can't see the progress.
Does anyone know of an alternative or workaround? All I need
to do is copy a file from one location to another, and measure the
progress while that is happening.
Since I control the client machines (it is a closed
environment), I have the option to setup file servers on every
machine and use the file download control with Flash instead of
file copy. However, when I investigate this option it seems that
the file download control will always trigger user interaction to
select the target path (which I don't want -- I want to
programatically select the source files and the target directory).
If someone knows a solution to that problem I would happily take it
and move on :)

Hi,
Use 2 FileStream objects in async mode (openAsync). One to
read and another to write. When you read in async mode, you get
progress events. When they fire, you can read bytesAvailable
amounts of data and write that to the output filestream.
The output filestream can listen for output_progress events
to ensure that new data can be written to it or not.

How to read the data from Excel file and Store in XML file using java

Hi All,
I got a problem with Excel file.
My problem is how to read the data from Excel file and Store in XML file using java excel api.
For getting the data from Excel file what are all the steps i need to follow to get the correct result.
Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
Thanks & Regards,
Sreenu,
[email protected],
india,

If you want someone to do your work, please have the courtesy to provide payment.
http://www.rentacoder.com

Network speed affected by large file copy operations. Also, why intermittent network outages?

Hi
I have a couple of issues on our company network.
The first is thate a single large file copy imapcts the entire network and dramatically reduces network speed and the second is that there are periodic outages where file open/close/save operations may appear to hang, and also where programs that rely on
network connectivity e.g. email, appear to hang. It is as though the PC loses it's connection to the network, but the status of the network icon does not change. For the second issue if we wait the program will respond but the wait period can be up to 1min.
The downside of this is that this affects Access databases on our server so that when an 'outage' occurs the Access client cannot recover and hangs permamnently.
We have a Windows Active Directory domain that comprises Windows 2003 R2 (soon to be decommissioned), Windows Server 2008 Standard and Windows Server 2012 R2 Standard domain controllers. There are two member servers: A file server running Windows 2008 Storage
Server and a remote access server (which also runs WSUS) running Windows Server 2012 Standard. The clients comprise about 35 Win7 PC's and 1 Vista PC.
When I copy or move a large file from the 2008 Storage Server to my Win7 client other staff experience massive slowdowns when accessing the network. Recently I was moving several files from the Storage Server to my local drive. The files comprised pairs
(e.g. folo76t5.pmm and folo76t5.pmi), one of which is less than 1MB and the other varies between 1.5 - 1.9GB. I was moving two files at a time so the total file size for each operation was just under 2GB.
While the file move operation was taking place a colleague was trying to open a 36k Excel file. After waiting 3mins he asked me for help. I did some tests and noticed that when I was not copying large files he could open the Excel file immediately. When
I started copying more data from the Storage Server to my local drive it took several minutes before his PC could open the Excel file.
I also noticed on my Win7 client that our email client (Pegasus Mail), which was the only application I had open at the time would hang when the move operation was started and it would take at least a minute for it to start responding.
Ordinarlily we work with many files
Anyone have any suggestions, please? This is something that is affecting all clients. I can't carry out file maintenance on large files during normal work hours if network speed is going to be so badly impacted.
I'm still working on the intermittent network outages (the second issue), but if anyone has any suggestions about what may be causing this I would be grateful if you could share them.
Thanks

What have you checked for resource usage during one of these copies of a large file?
At a minimum I would check Task Manager>Resource Monitor. In particular check the disk and network usage. Also, look at RAM and CPU while the copy is taking place.
What RAID level is there on the file server?
There are many possible areas that could be causing your problem(s). And it could be more than one thing. Start by checking these things. And go from there.
Hi, JohnB352
Thanks for the suggestions. I have monitored the server and can see that the memory is nearly maxed out with a lot of hard faults (varies between several hundred to several thousand), recorded during normal usage. The Disk and CPU seem normal.
I'm going to replace the RAM and double it up to 12GB.
Thanks! This may help with some other issues we are having. I'll post back after it has been done.
[Edit]
Forgot to mention: there are 6 drives in the server. 2 for the OS (Mirrored RAID 1) and 4 for the data (Striped RAID 5).

Stor.E TV+ file copy problems

Similar Messages

Maybe you are looking for