STOR.E TV+ file truncated or invalid

Hi
When I copy MP4 files to my STOR.E TV+ (2TB) they initially play back fine.
Then when I go to play them again some days or weeks later one or two files appear to have become truncated (ie. plays about 2 thirds way through and then stops with no error message) or ocassionally just comes up with "Invalid file" error message.
Also its not necessarily the files most recently copied that may be corrupted.
The files are approx. 600Mb in size.
I currently hold about 100 of these MP4 files on the STOR.E
Any Ideas?

Hi
To be honest I never heard about such issue
Maybe you should set the StorE TV+ to default settings.
In System setup choose Restore default. This would restore the factory default settings.
At the other hand an HDD format might be useful too
In System setup choose HDD format which allows you to select the HDD format.

Similar Messages

  • Pavilion dv6-3120sa​. Error: 0x000024. Windows BCD store file contains some invalid informatio​n.

    Pavilion dv6-3120sa. Windows 7 Home Premium SP1 64bit.
    PC boots into Windows and everything runs OK but I've lost the ability to launch Startup Repair.
    I wanted to create a new partition and move personal files for three users to it so the C: drive is for OS and programs only. I hoped to assign the drive letter 'D' to the new partition.
    As 4 primary partitions already exist, I had to make an extended partition and moved an existing partition to it. I removed the drive letters from the Recovery and HP_Tools partitions and assigned the new partition 'D'.
    Fearing I'd done wrong, I found Recovery would not work then read the Recovery partition must remain as 'D' and tried to put things back as they were.
    Partitions are now as follows: Primary partitons: System, OS on 'C', HP_Tools no drive letter plus a lot of unallocated space. Extended partition with Recovery as 'D'.
    When I restart and press ESC then F11 and choose 'Launch Startup Repair' I get the message "The Windows Boot Configuration Data BCG store file contains some invalid information".
    I explored with Bootrec and BCDEdit.
    I've identified the 'ResumeObject' GUID but shied away from doing anything with it.
    Description: Windows Recovery Environment
    Status: 0x0000024
    Info: The configuration for an element within the object is invalid in the Boot Configuration Data store.
    I do not want to do anything that might affect the PC as it is working just fine, but would like to get 'Recovery' working properly.
    When I restart, press ESC then F2 System Diagnostics, it takes me to HP_Tools OK as I can see and use the menu of items so it seems that partiotn is functioning.
    I had made a Recovery CD and used it with the Bootrec and BCDEdit commands but am unsure what to do next as I don't want to make the situation worse by using the wrong command.
    Please can you tell me what to edit and how?

    Moving the Recovery partition to the extended partition is not going to work. I really don't understand why you are moving personal files to another partition and still expecting to use Recovery anyway when needed because it will wipe out the partition with personal files. Best to use external USB HDD for file storage.
    You might get some use out of Dan's guide:
    http://h30434.www3.hp.com/t5/Other-Notebook-PC-Que​stions/How-to-repartition-HDD-of-HP-notebook-with-​...
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • RPC request to the Microsoft Exchange Information Store service for log truncation

    Hello all
    Running Exchange 2013 CU3 on Windows 2008R2 sp1 in a two node DAG. We are seeing the bellow warning when running a backup. How to resolve this?
    RPC request to the Microsoft Exchange Information Store service for log truncation failed for database CoramB3\Servername. Error: Failed to notify source server 'servername.coram.com' about the local truncation point. Hresult: 0xc8000713. Error: Unable to find
    the file. Also log files are not being flushed
    Bulls on Parade

    Hello,
    Please verify backup software.
    Please use vssadmin list writers command to check the status of the VSS admin. If it is in a
    failed state, please restart the Exchange replication service and then check the status again.
    Please use Get-MailboxDatabaseCopyStatus cmdlet to view health and status information about mailbox database copies.
    Please use Get-DatabaseAvailabilityGroupNetwork “DAG Name” | fl cmdlet to view configuration and state information for a DAG network.
    Please use Get-DatabaseAvailabilityGroupNetwork DAG Name\MAPINetwork | fl cmdlet and Get-DatabaseAvailabilityGroupNetwork DAG Name\ReplicationNetwork | fl cmdlet to
    check configuration information for MAPI network and Replication Network.
    If the above configuration information is ok, please check if there are other related errors in application log.
    Cara Chen
    TechNet Community Support

  • How to store the zip file in oracle table?

    hi,
    How to store the zip file in oracle table ?
    is it possible to unzip and read the file ?
    Thanks
    Rangan S

    SQL> DESC BLOB_TABLE;
    Name Type Nullable Default Comments
    A INTEGER Y
    B BLOB Y
    SQL> INSERT INTO BLOB_TABLE VALUES(5,BLOB('MWDIR_TST','TEST.ZIP'));
    INSERT INTO BLOB_TABLE VALUES(5,BLOB('MWDIR_TST','TEST.ZIP'))
    ORA-00904: "BLOB": invalid identifier
    SQL> INSERT INTO BLOB_TABLE VALUES(5,('MWDIR_TST','TEST.ZIP'));
    INSERT INTO BLOB_TABLE VALUES(5,('MWDIR_TST','TEST.ZIP'))
    ORA-00907: missing right parenthesis
    SQL> INSERT INTO BLOB_TABLE VALUES(5,('\\MWDIR_TST\TEST.ZIP'));
    INSERT INTO BLOB_TABLE VALUES(5,('\\MWDIR_TST\TEST.ZIP'))
    ORA-01465: invalid hex number
    SQL> INSERT INTO BLOB_TABLE VALUES(5,('\\MWDIR_TST\TEST.ZIP'));

  • Stor.E TV+ file copy problems

    I have a Stor.E TV+ 2 tb and I have had problems copying files using the on-board system and copying from a USB stick or external HDD.
    Some file show as invalid.
    I have discovered that this does not happen or at least happens less if I connect via USB and copy from a PC.
    Has anybody else noticed this and is there a solution.

    As for the Samba problem, this firmware upgrade does not solve the problem of large file transfers. Not sure actually what this software upgrade does improve as I have not noticed any material difference in performance (or shall I say non-performance). There is no information either from Toshiba on this. For copying large files, use the Microsoft RichCopy utility which you can download free from their web-site. It has the added benefit that it manages the copying process and retries in case of any dropouts.
    Message was edited by: fuddrocks
    Please note that the above applies to copying large files across a network, not internal copying from a USB or disk.
    Message was edited by: fuddrocks
    In case of copied files not showing up on Toshiba screen even though they are visible on a remote PC, this could be due to the file being an unsupported type (e.g. I think .ape is a problem) or the file extension is incorrect (e.g. .fla instead of .flac). In first case use Audio Converter s/w to convert files to supported audio format or, in second case, use File Renamer s/w to correct the extension.

  • ITunes v10.6.1.7 "Copying files failed. The File name was invalid or too long."

    I'm trying to organize my music files using iTunes 10.6.1.7 and I keep getting the error message "Copying files failed. The File name was invalid or too long."
    I've got music folders by artist in both the iTunes Music folder and the iTunes Media/Music folder. When I add certain files by drag/drop they sometimes get lost and I don't want that to happen anymore. I used to just consolidate my music files using the File/Library/Organize Library option and that worked, however now when I do that, I get the error message.
    I'm a novice and the only online stuff I see is both confusing and refers to earlier versions of iTunes.
    My concern is that I have heard that people lose entire libraries of their music when they trry to fix things like this and I don't want that. If this is of any importance, I have several files called iTunes library and temp library. I have no idea what that all means but I'm scared to death of it.
    Also, I can't get to the "re-organize library" link at all. It won't let me.
    One thing that be of some interest is that when I pull up the properties of the music and media/music files they are marked "read only" I'm also afraid to touch that!
    Please help and please know that I am a dummy. Be kind and be clear. Step by step would be great, with images even better. Thanks.

    Perhaps nobody knows the answer? We're fellow users here answering questions in our free time when we think we've something useful to contribute.
    You can choose to *Consolidate selected tracks* with a right-click menu. Perhaps if you can identify a specific track that won't consolidate and examine the full path to the file & the path that iTunes would create when it consolidates the problem might become apparent. For example iTunes may not be able to move files if the source or destination path length exceeds 255 characters.
    tt2

  • The itunes application could not be opened.  The file name was invalid or..

    ...too long.
    No idea when this started but cannot launch iTunes at all. To reiterate, when I try to launch iTunes I get the following error message: The itunes application could not be opened. The file name was invalid or too long.
    I actually uninstalled it and reinstalled on my external drive and it came back with the same error. Any ideas on how to troubleshoot what caused this? I am at my wits ends with this!

    I can't get mine to open at all. I even try clicking on a song to see if that will open it, nope. I have hooked up my iphone and ipods, nope. Click the icon, nope still nothing. It keeps erroring, but won't let me copy the error to put in here. I looked at the report it wants to send out, but there is nothing that says why it is erroring. Anyone else having this problem. Please email me at [email protected] to let me know what you did to solve it, or who I have to talk to to get it fixed... Thank you

  • How to read the data from Excel file and Store in XML file using java

    Hi All,
    I got a problem with Excel file.
    My problem is how to read the data from Excel file and Store in XML file using java excel api.
    For getting the data from Excel file what are all the steps i need to follow to get the correct result.
    Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
    Thanks & Regards,
    Sreenu,
    [email protected],
    india,

    If you want someone to do your work, please have the courtesy to provide payment.
    http://www.rentacoder.com

  • How do I convert an excel (2008) document to Numbers?  When I drag the Excel document onto the Numbers icon I get, "Import error.  The file format is invalid"

    How can I convert an Excel (2008) document to Numbers.  When I drag the Excel document onto the Numbers icon I get, "Import error.  The file format is invalid.

    That extension identifies the most current Excel file format, a format that can be opened by Numbers '09 (and by Numbers '08).
    A check with Numbers '09 shows it capable of opening .xlsx files when right-clicked (and Numbers chose as the application to open, when double-clicked (if Numbers has been set as the default application to open this type of file, or when dragged to the Numbers icon in the dock.
    I see two possibilities for Numbers inability to open it and the message you receive:
    1. The file is not actually an Excel file, and the sender has added the .xlsx extension to the filename manually.
    2. The file is an Excel file, but has somehow been corrupted.
    Have you tried opening the file with a different application? The open source Office suites, OpenOffice.org, LibreOffice and NeoOffice can also open .xlsx files. If they're unable to open this one, that would point toward the file itself being faulty. You can download these applications from their rspective websites, linked in the names above. All request a donation to support future development, but only Neo requires one to have been made recently, and that only for the current release (which won't be necessary to open .xlsx files).
    Regards,
    Barry

  • How can i store a picture file in a table using sql

    can anyone help me
    to store a pic file in a table using sql

    You can find an example in this link
    http://www.orafaq.com/forum/t/38347/0/

  • How to store a JSP file in the SAP Application server ?

    Hello All,
    My reqt. is as follows :
    1. I need to store a JSP File on the SAP Application server .
    How can I do this ?
    2. I want to call the uploaded jsp file from the server and call this jsp from abap to view the result of it .
    How can I achieve this ?
    First of all is this possible ?
    Regards,
    Deepu.K

    Hello Mike,
    Thanks for ur reply.
    I've imported the JSP as a mime object into the BSP.
    Now I've created the page to show that Mime Object as an image.
    But nothing is coming as an output.
    But then,there is an option for that mime object. i.e when I right click on the mime object there is an option called " convert to BSP".
    I selected that option and it created a view in my BSP .( My BSP is a page with flow logic application )
    Now how should i make this view to be an output ?
    I guess this shud be posted in the BSP Forum ...but still taking a chance here :)-
    Regards,
    Deepu.K

  • "not a valid short file name" and "invalid character" install errors

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    Symptoms
    While upgrading or uninstalling a Windows software application (such as iTunes for Windows or QuickTime for Windows), you may receive one of the following error messages:
    file name is not a valid short file name
    The folder path 'folder name' contains an invalid character.
    ... where file name could be the name of any file, and folder name could be the name of any folder.
    In the case of software that uses advertised shortcuts (such as recent versions of iTunes for Windows or Safari for Windows), the messages may also appear when attempting to launch software that has already been installed.
    Resolution
    The error messages are usually caused by damage to the installation database for the application. Clearing the installation database for the application by using the Windows Installer CleanUp utility can usually get you past the error message.
    (1) Click [here|http://support.microsoft.com/kb/290301] first, and read the important information about the utility.
    (2) Click the *Download the Windows Installer Cleanup Utility package now* link on that page to download a file titled msicuu2.exe.
    (3) Open the msicuu2.exe file and follow the prompts to install it.
    (4) In your Start menu click *All Programs* and then click *Windows Install Clean Up.* The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (5) Select the software you're getting the "not a valid short file name" or "invalid character" message for from the list and click Remove.
    (6) Click OK in the confirmation dialog that appears.
    (7) If you have multiple entries for the software you're getting the "not a valid short file name" or "invalid character" message for, repeat steps 5 and 6 for the other entries for the software.
    (8) Click Exit.
    (9) Restart the computer.
    If you were getting the "not a valid short file name" or "invalid character" message when trying to upgrade or launch software, now try reinstalling the latest version of the software.
    If you were getting the "not a valid short file name" or "invalid character" message when just trying to uninstall software, program files for the software in question will remain on the PC after it has been removed by the Windows Installer CleanUp utility. If you want to remove leftover program files, check in at the appropriate forum at [Apple Discussions|http://discussions.apple.com/index.jspa?categoryID=1] and ask which files can be safely removed.
    This is the 1st version of this tip. It was submitted on March 24, 2010 by b noir.
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

    Go to Microsoft website to fix installer file problems.
    Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    Download and Install iTunes

  • "attempting to copy to the disk C:\ failed. the file name was invalid or...

    "attempting to copy to the disk C:\ failed. the file name was invalid or too long." This was the message that I keep getting after trying to "add folder to library" of multiple tracks from an external hard drive. it only happens after a certain period of time.. i get about half of my tracks added before this message pops up. when i first got my i pod it worked fine. but after i hooked up my i pod several times without having that external drive on... the i pod took over that drive letter that my external drive used to use. so.. when i turned on my external drive, it was given a new letter.. then i tunes would not recognize those 1500 tracks that came from my external drive (explanation points listed next to tracks). so.. I deleted all of those files manually, then tried to add folder to library again from the new letter coordinating to my external hd. I kept getting that message above. after that i deleted all files associated with i tunes.. and uninstalled i tunes.. then did a reinstall.. did i tunes update from site... and tried to just add the set of tracks from that external hd... still same **** error. only now.. after i say ok to error... i tunes continues for like 2 seconds.. then has to shut down... ****!!! can anyone help me with this... anyone?

    just to update my problem... I finally figured out that i had to disable the "copy to my itunes folder from my library option. just so you know. apparently i tunes cant handle the large transfer to itunes and also at the same time copy it to your itunes folder... APPLE fix this!!!!!! this suxxxxx....

  • Consolidate Problem. Copying files failed. The File name was invalid.

    Hi to everyone,
    My system is 10.5.8, iTunes 9.2.1 (4)
    I tried to consolidate my iTunes library to an external HD. After about 100GB of copied music, I got the message : Copying files failed. The File name was invalid.
    Now everytime I try again to consolidate, I get immediately this message. I am looking everywhere for a solution, and I only find the same problem for Windows iTunes users.
    Actually I found very useful this thread:
    http://discussions.apple.com/thread.jspa?threadID=1708372,
    which talks about with which order iTunes consolidates the media, so by digging a little in the folders to find which track has the problem and make the fix. It says that consolidate start copy the files by the date added order. So I can go in my new iTunes media folder and find the latest added track, then go back in iTunes, sort by date added the songs and locate the next song, to make the fix. However in my case, all previous and next songs (by date added), have been copied in the new locations.
    I am stuck. I have a remaining 300GB of music to consolidate and dont know how to proceed.
    Any help would be much appreciated..

    Finaly, I managed to solve it by myself...,
    following the help I found from the post of the thread I mentioned on my question...
    What was the problem that made things more difficult in my case, is that a big amount of songs have been added at the same time, with just a few seconds time distance. So it was tougher to locate what was the last imported song, and where iTunes consolidation had stopped. Actually I had groups of about 100 songs with the same timestamp of date added and the consolidation was following the rule of the "date added" but not exactly with the order the songs was showing in the iTuned library. So I started checking all the songs very close to the last added in the media folder one by one with the "show in finder" command, and then I managed to found what was the one with the problem.
    Regarding the problematic file, that was a midi file that had been imported in my iTunes.
    I hope this will help anyone else that might have the same problem as me in the future.

  • Itunes for WIN7: attempting to copy to disk "..." failed.  The file name was invalid or too long

    itunes for WIN7: attempting to copy to disk "..." failed.  The file name was invalid or too long
    help!!

    Max. path length is 255 characters, or perhaps there are some non-displaying characters hidden there. Try dropping a song you want to add to iTunes into the Automatically to iTunes folder to see if that works any better.
    tt2

Maybe you are looking for