Storage 3320 single raid controller connecting with 02 Host Connection

Dear ALL,
I have 3320 with single raid controller, 5x HDD. I started to install it in a single-bus configuration to meet up with Host & External tape due to the following diagram:
1) using a correct SCSI jumper cable to connect between the SCSI port "CH0" and the SNGL BUS CONF together
2) Connecting the SCSI port labeled "CH1" with SCSI LVD Sun Server running Solaris 9 by SCSI cable
3) Connecting the SCSI port labeled "CH3" with the external tape device by the SCSI cable.
As a result, the Host Server can see the only Logical Drives and i could make the approciate partitions.
But the problem is that the Server could not see the SCSI Tape device on this case (Tape device & cable are fine, tested ok before). I am wondering that if all connection above with connecting to Server & Tape device are ok here, then why is the tape device not being recongised under the Solaris ?? and even it's not being known under the OK prompt when i tried to run probe-scsi...
regards
Scott

Please bypass all questions above, i would like to brief what i need to get helps as the below.
Pls advice me how to get the external SCSI LVD tape device connected with SE 3320 raid Controller WHILE the Array 3320 was connected with Sun Server through the SCSI Port labeled "CH 1", the SCSI jumper cable connected between "CH 0" and the SNGL BUS CONF port in a single-bus configuration (By the way, Se 3320 raid is working well with Server).
Thanks for any comments
Scott

Similar Messages

RemoteApp with host connected to VPN

Hi,
I have a question regarding RemoteApp vs regular Remote Desktop Connection spiced with a VPN connection initiated from the host.
We're in the process of moving from PCs to thin clients and we have set up an RDS farm (all servers are Windows Server 2012 R2, they are all in the same domain and same LAN) as follows:
1 x RD Connection Broker + RD Licensing + RD Web Access
3 x RD Session Host
The users/clients will connect with regular remote desktop connection software (no Citrix or anything). Two of the RD SHs will be providing the users access to their normal applications, but some users also need to use remote resources which are only available
via VPN connection, hence the third RD SH. (Currently it is solved by every user having a virtual machine on their PCs and connecting to the VPN from there.) We can't put the VPN connection to the two "regular" RD SHs, because we'll need more VPN
connections later. The idea was to install and set up the VPN on the third host and publish the needed apps by RemoteApp to the users who use it.
The problem:
Once the host connects to the VPN the users are unable to launch the RemoteApp applications. If it's not connected then they can start them. The VPN client is a Cisco AnyConnect Secure Mobility Client that can only connect if the connection is initiated
by a local user and no other user is currenty logged on (it's a remote side policy we can't change). If the users connect to the RD host with a regular remote desktop connection after the VPN is set up then it works as expected, they can launch the apps and
work with them.
The question:
What is the difference between launching a RemoteApp and connecting to the RD host via RDP? How can I debug this RemoteApp connection problem?
Please ask if something is not clear!
Thank you!
PS: If I'm not heading into the right direction and someone has a better idea, I'd be grateful to hear (read) it!

Hello Vargabes7,
You can configure a server that allows remote users to access resources on your private network over dial-up or virtual private network (VPN) connections. This type of server is called a remote access/VPN server. Remote access/VPN servers can also provide
network address translation (NAT). With NAT, the computers on your private network can share a single connection to the Internet. With VPN and NAT, your VPN clients can determine the IP addresses of the computers on your private network, but other computers
on the Internet cannot.
Before you configure your server as a remote access/VPN server, you should verify whether or not:
The operating system is configured correctly.
Your server is correctly configured for optimal security for your network needs. Because your remote access/VPN server will connect your private network, the Internet, and your remote clients, you must make sure the server is secure. The security
of your private network depends on the security of your remote access/VPN server. For more information, see
Security information for remote access.
This computer has two network interfaces, one that connects to the Internet and one that connects to the private network. The connection to the Internet must be a dedicated connection with enough bandwidth that VPN users can connect to your private network
and users on your private network can connect to the Internet. The connection to computers on your private network must be made through a hardware device, such as a network adapter.
All needed network protocols have been installed for your network interfaces. For more information, see
Network interfaces.
Windows Firewall is disabled on the server that you want to configure for remote access/VPN. You will configure the Basic Firewall feature of Routing and Remote Access during setup, which will serve in place of Windows Firewall.
Internet Connection Sharing is disabled on the server that you want to configure for remote access/VPN.
The Security Configuration Wizard is installed and enabled.
To configure a remote access/VPN server, start the Configure Your Server Wizard by doing either of the following:
From Manage Your Server, click Add or remove a role. By default, Manage Your Server starts automatically when you log on.
To open the Configure Your Server Wizard, click Start, click
Control Panel, double-click Administrative Tools, and then double-click
Configure Your Server Wizard.
On the Configuration Options page, click Custom configuration and click
Next. On the Server Role page, click Remote access/VPN server, and then click
Next.
Best regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

AIM - connection with host unexpectedly lost

When I am using my school's wireless internet, I can log onto iChat for about a minute, and then it logs off and says "Lost Connection with AIM. The connection with the host was unexpectedly lost."
If I stay on the iChat window it stays logged on, but if I bring another application to the front of the screen it eventually logs off.
I also cannot use video chat.
I found a similar thread that said to use port 443, which I am currently using.
It does the same thing even if I am logged in to my .mac account. However, Adium works and everything works fine when I am at home or somewhere else. As far as I know, my proxy information for my school's wireless is correctly entered in.

Hi,
Welcome to the  Discussion Pages
iChat is very sensitive to Proxies.
In fact I would say it does not like them at all based on the posts in these forums. Many people report they can not get it to work with a proxy whether it is listed in the iChat > Preferences > Accounts > Server Settings or in the System Preferences > Network.
I don not use Proxies and still find at some points iChat does not seem to be able to stay logged in.
I never use another client long enough to provide a comparison.
iChat gets constant feedback from the AIM servers to keep the Buddy List updated. More so than a Minute check setting by Mail - so I can not see it is any time-out limit on the proxy.
Isn't iChat using port 1080 for the Proxy ? (or whatever your Proxy uses )
10:49 PM Wednesday; April 2, 2008

Single RAID 5 voume with partitions or mulitple RAID volumes?

I'm setting up in the RAID Utility. My question is: Is it better to create a single RAID 5 Volume and create 3 partitions using Disk Utility or create 3 RAID 5 Volumes from the RAID 5 Set? I want the OS, Data 1, and Data 2 to be separate and get the best performance possible. Any questions, let me know.

Hello, Techromancer27, and welcome to the AppleBoards,
Are you asking about the Xserve RAID the 14 drive hardware unit or setting up a RAID inside an Xserve using the RAID card? This discussion group is dedicated to the Xserve RAID hardware unit so it is easy for these questions to get confusing.
If you are asking about the Xserve itself and the internal disks you have only the option of creating a single RAID5. RAID5 requires a minimum of 3 drives which is all the Xserve can hold so your choice is pretty clear. If you are asking about an external unit of some kind with more drives you'll need to elaborate.
HTH,
=Tod

Hide a company to a windows group connect with trusted connection

I mean, how can I do, to create two groups in the windows active directory, and do users member of the first group and other to the second groups.
Now, when a user from the first group connect with client sap b1 with trusted connections doesn't see all companies (databases) but only those that I decide. The same thinks with the second group.
I don't want to use the 'sa' connections, because in the sap b1 8.8 the connections will be on server.

Not sure if understood correctly.
If you want to assign to each user only specific companies and you are using trusted connection to sql, you may modify
tmsp_getcomplist stored procedure in sbo_common for example as
USE [SBO-COMMON]
GO
/****** Object: StoredProcedure [dbo].[TmSp_GetCompList]    Script Date: 09/04/2009 10:01:56 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER proc [dbo].[TmSp_GetCompList]
--With Encryption
as
begin
set nocount on
declare @comps int
set @comps = 0
select @comps = count(1) from SRGC
if (@comps <= 0)
begin
     exec TmSp_RefreshCompList
end
declare @user as nvarchar(100)
SELECT @user = SYSTEM_USER
select * from SRGC
      where dbUser =   convert(varchar(50), CURRENT_USER)
and
(@user <> 'John' or (@user = 'John' and dbname = 'Demo') )
end
User John in this example will wee only demo company and the rest users will see all companies. Hope it helps.

Dead connections with Implicit Connection

Hello,
With OracleConnectionCacheImpl I had a pool that worked fine except when the pooled connections lose their connection to the database (ie database goes down for weekly maintenance). However, when the db came back up the connections were still "INACTIVE" but dead meaning when you tried to access the pool you'll get "Cannot connect to Oracle" errors.
Can anybody tell me if this behaviour changes with the new Implicit Connection, and if itÂ´s the case, provide references?
Thanks in advance,
Robert

Hello Tugdual,
thanks for your time, the versions are :
OC4J : not standalones but as a part of OAS 10g (9.0.4.1)
JDBC Driver : included in OAS currently classes12.zip , but I suppose I also can use ojdbc14.jar.
JDK : 1.4.2_02
With this versions does the Implicit Connection provide dead connection detection in case of database down ?
Regards,
Robert

Enable auto connection with Access Connections?

I was wondering if anyone could tell me how to make my T61 connect to my mobile broadband internet connection automatically when coming out of sleep and/or hibernate? Can it be done through Access Connections? I'm running the latest AC on Vista 64.

You can set Access Connections to connect to your WAN if none of the other wireless profiles are available.
Open Access Connections and in the upper right, switch from Basic to Advanced.
Go to the Tools tab and click on Location Switching.
The bottom check box can be set "When no other connections are available, connect through WAN or WiMax"
Set that and click Ok.

SPN - SMB connection with Host A record with Kerberos Auth

I want to connect to a Share \\originalservername\share but I want to use a different hostname,
It will be a new host (A record) added to the DNS it is not going to be a CNAME.
Do I still have to set SPN for this Host A record? If so, would it be as
setspn -r newhost
Or would it be something like:
setspn -a host/newhost originalservername
If it is not required could you explain why?
I want to use Kerberos authentication not NTLM

Hiya,
I prefer using the setspn -s for registrating spn's, as it checks for duplicates.
So in your case it would be;
setspn -s host/<new name> <originalservername>
setspn -s host/<new name>.<domain> <originalservername>
example:
setspn -s host/server1 server99
setspn -s host/server1.contoso.com server99
You need an SPN registrered in order to use Kerberos, therefore it is required.

? Wireless Drivers - Only connects with Ethernet connection.

Hello!
Thinkpad Edge 0578 14 -
I have to reinstall win 7. Now the wireless won't turn ( I tried the wireless button already). Wired Will work.
troubleshooting I did and did not work:
- downloaded drivers from site http://support.lenovo.com/us/en/downloads/ds014964 put it on usb drive and transferred
- Click it update drivers device, did not work.
Device manager display:
On network adapters display the hardware is working: Realtek PCIe Family Controller
Other devices display: Network controller, PCI Data Acquisition and signal, PCI Simple communication and SMS Bus controller with a yellow mark - Drivers not installed.
PLEASE need your advise. Where i can find the correct driver what can i do to update it.
Thank you! Michael

Thanks for all the comments (most of them anyway :)). Since my first problem was that I couldn't identify what the thing is called, so I didn't get stuck with a transmit only device, I called Belkin. I was told that their product was a Wireless G Gaming Adapter (F5D7330). The rational was that XBox, etc. may not have USB ports, but they all have ethernet ports.
I then asked about my busted wireless adapter. She looked it up and said the replacement was due to be shipped out shortly. She then volunteered to switch the product to the Gaming Adapter (list price $100), so I said fine.
I then went to Amazon.com and looked up the reviews of the F5D7330. 80% loved it, 14% hated it, and the difference said they liked it after all the setup hassle.
BTW, all this started about 5 years ago when I bought a Belkin Wireless adapter for my PMG3. It looked like a mouse with one antenna sticking out. I got a rehab unit for about $20 ($70 new). It was bad, so 4 months later they sent me another one. It lasted a while and went bad, so they sent me the new one shaped like a stick of gum. It has now gone bad, so they are sending me the Gaming unit that looks like a mouse with antenna sticking out. Round and round. At least I keep getting the newest thing for my original $20 investment.
Mini(CD2), Imac(CD2), G5 PM Mac OS X (10.4.8)

Wifi - Connected with no Connectivity

After a reset of my D-Link DIR-855 router, my Ipad2 and Iphone 4 are performing poorly (or not at all), not being able to access any internet or online content even though both are connected to the router. I have tried resetting the router, the modem, the ipad 2, restoring to a back up, reset network setting, toggling brightness and just about every other setting, changing wifi type and password. Note that our laptop connects well and has no problems. I am at a loss as to how both iOS gadgets can be crippled due to a router restart even when no settings were changed. Help please......

I had this same problem with that exact same router. My computers worked just fine, but my xbox and iPhone didn't. The router just failed, but not completely.
Do you have a spare router to test with? One thing I learned from my fiasco was to always have a backup router tucked away in the closet, especially since they're so cheap now.

JDBC connect with "XML Connections export"

I would like to use the existing connection configuration for a statistik over all connections. Is there any way to use the encrypted password in this file for JDBC connection? I didn't get a hint on that. How does sqldeveloper connect - could I use a class from it?
Regards Matthias

Writing something outside the tool would not be easy. If you write an extension, you can get the connection just like the Fourth Elephant guys have done.
-kris

Bluetooth music connectivity with Nissan Connect Navi system

I can connect my iphone 5 by bluetooth for phone use, but it wont connect and allow music by bluetooth.
Nissan say Apple wont allow data transfer on the navi system, and i must connect using the USB connection.
Both Nissan and Apple tech support info advises that there is OK bluetooth compatability profiles A2DP and AVRCP.
Going around in circles, any one got suggestions?

Goodbrand, were you able to resolve your issue.
I found the following, very interesting situation. If I connect any iPod via USB to the Qashqai AND connect the iPhone via Bluetooth (that's right, I am talking of two separate devices), the iPod will not resume playing once a call arrived on the iPhone.
Kind regards
Stefan

No connection with server, connection failed, asks wifi password

our i-pas has always worked great, suddenly we couldn't use internet anymore. Connection failed and ask wifi password.
I installed the new version of i-tune and re-installed our i-pad. Still no connection. What to do?

Hi,
Please make sure,
1. Correct user ID and password entered
2. There is no firewall/ antivirus turned on
Thanks & Regards,
Nagarajan

Howto use onboard Promise Raid Controller pdc20265 on 694D PRO AR Ver1

Currently I'm running Win2k on my MSI 694D Pro AR Ver 1.0 board with Bios version W6321VMS.310 and the included Fasttrack-Family Win2k Raid-Controller driver for my Promise Raid Controller pdc20265 with lite bios.
Due to software updates I'm now absolutely required to switch to Windows XP Prof. However this is the cause for my inquiry:
I downloaded and installed the latest available Bios version W6321VMS.370 from MSI site.
On installation of XP I tried to include the pdc20265 Fasttrack raid driver from MSI site to get access to my HD's. However WinXP couldn't find any HD's. Remark: XP with SP1 and VIA 4in1443v.exe installed.
So I repeated this procedure with the original drivers Fasttrack family and pdc202065 which were attached on floppy. Unfortunately no success as well.
Then I have put the HD on the Ultra66 channel and installed XP first without raid and ultra 100 support.
Later I re-enabled the on-board promise device in bios and unfortunately WinXP didn't recoginze the device by itself. So I provided the latest pdc20265 driver from MSI site. XP complained that the driver is not digitally signed. After reboot the promise device reported an error under WinXP.
I repeated this procedure with the original drivers Fasttrack family and pdc202065 which were attached on floppy. Unfortunately no success as well.
Why MSI-Site says this pdc20265 driver supports WinXP if there are only the Win2k and WinME,98... drivers included?
Currently I can't use the promise device at all under WinXP. This means even I don't have an Ultra 100 controler available.
Has anyone an idea how to install HD's on WinXP with the corresponding promise raid drivers for my pdc20265 onboard chipset?
I'd really appreciate your help!

Some of the suggestions I don't understand quite well. Please could you explain further:
> remove the other two drives leaving the raid pair
> and cd only
>
> put raid 2nd in boot order
What do you mean with that?
> reboot press the key you need to get in to raid bios
> create the array and make it bootable
array is already created (Note: there is important data on it, can't recreate it! Only Segate 80GB is free and empty)
I don't want to boot from raid.
>
> now boot to cd to install,right at beginning it will say
> press f6 to install mass storage drive you need the
> driver on floppy to install it
I already tried the XP-Install routine to specify additional mass storage drivers. (Note: 1 single 80GB Drive was attached) Which are the suitable ones? As mentioned I tried the following:
1. Attached floppy 'Fasttrack family drivers'
Result: Message: Driver is for Win2k only. Not a single Harddrive shows for installing XP.
2. Attached Floppy (Promise Ultra 100 lite, 256 only)
Result: Driver is for Win2k only. Installation procedure hangs.
3. Driver from MSI-Site for pdc20265. Same as 2.
4. Extracting via4in1 drivers and putting WinXPIDE drivers on floppy:
Result: Installation routine doesn't recoginze drivers on floppy.
> rest should be the same as normal
>
> this should be similar as well
>
> http://www.amdforums.com/showindex.php?s=&threadid=146384
Which is the right driver for WinXP to specify for mass storage device at WinXP installation?

Shopping For A RAID Controller

I have seen the Areca brand name on here many times, so I assume they are the best for what we do. But, there are so many models that I have no idea what to look for. I probably won't ever have more than 4 or 6 storage drives plus an SSD system drive. Maybe a couple of external drives and an NAS.
If I have Windows 7 64-bit
i7-2600k processor
ASUS P8P67 Pro motherboard
32 GB RAM 1600
GeForce GTX 580 Amp! from Zotac
AX850 PSU from Corsair
Every component is reasonably fast, bu I am sick of the senseless limitations of this mootherboard. My drives are aging so they need to be replaced.
Which specs are important for video editing? Which brand and models are most popular and shoould I wait for some new release?
Another thought - If a RAID controller is over $400 US, Is it more cost-effective to upgrade to a more capable motherboard/processor with all the ports I need?

What to look for
Brand
Areca or LSI
Ports
8 or more
Card
PCIe-3.0 8x
Cache
512 MB or more
Multi-lane
SFF-8087/8088
Examples
Areca ARC-1882 series or LSI MegaRAID 9285
Warning: You have to realize that on your motherboard adding a dedicated raid controller will entail that your video card will throttle down from PCIe-16x to PCIe-8x mode, resulting in a 10 - 15% performance penalty, due to limitations of the chipset. A dedicated raid controller, especially with around 6 disks always outperforms an on-board raid by a wide margin. To see some benchmark results, look here: Reflections
To see what meets your requirements, also consider the raid level you want to use. If raid3 or raid30, then LSI is out. You can check out what controllers are popular here: Detailed Results but you have to be registered and logged in to access the page.

Storage 3320 single raid controller connecting with 02 Host Connection

Similar Messages

Maybe you are looking for