Storage Bin No same as PO no

Hi,
When I am doing GR of a WM managed material the storage bin no being for that material & mat doc is same as PO number.
Pl guide
VS

Why the Bin NO is same as PO NO:
1. Check the movement type
    SPRO>Logistic Excecution>Warehouse Management>Activities>Transfers->Movemnet Type
   If you click the movemnet type 101 for the warehouse you will find "SCR" box checked which is for the dynamic Bin.
2. Also Check the requirement for the movement type in the similatr way as mentioned above.
3.Now follow the path as mentioned below.
1. Check the movement type
    SPRO>Logistic Excecution>Warehouse Management>Activities>Transfers-> Requirement Type
Double Click on the Requirement Type
Check the combination of Warehouse and requirement type(taken from movemnet type as mentioned above)
Check if the field "Dyn. Bin. Mat." is checked , if yes then check the field name if its written as "MSEG-EBELN" then Purchase Order will be displayed as Bin NO. and if the field is
MSEG-MBLNR then material document no will be shown as the Bin No.
Please reward if you find it useful

Similar Messages

Row consolidations of same material in storage bins.

Hi Experts,
we have a requirement below,
. Current Process: Inventory Analysts utilize an established query in SQ00 to enable them to perform row consolidations of same material in storage bins to maximize storage bin capacity and create empty storage bins in warehouses .
Example: Row 621 only has 1 pallet and that pallet will fit in row 625(Row) of which only has 31 but the max is 32 in that bin. Again you see bins 725 and S-27(material) only have 1 pallet each and can fit easily in 715 as it only has 15 pallets but can hold 32.
. The analyst take the data from this query and manually create a Row Movement sheet to give to the forklift drivers to perform the assigned movements.
1) is it possible SAP to do automate this task?
2)Can SAP logically determine this equation?
3) Is it possible SAP to generate this spreadsheet and go ahead and create the TO in the background?
Please do the need full ASAP, Quick response is highly appreciated .
Thanks and Regards,
Chiranjeevi

Of course you can do this, but not with SQ based reports.
You will need to code a custom ABAP report.
First you will need to find best matches in storage bins, then use BAPI for TO creation.
You will easily have all the info from the source and destination bins from your matching
table/data. You can search forums for more info on this BAPI, but I can tell you it is pretty
easy to use even for an inexperienced ABAP-er.
I have created a report for this in my company a while ago, but didn't implement automatic
TO creation since we wanted to give our WH people freedom and didn't want to create a huge
amount of TOs which need to be cancelled if WH workers don't have time to perform this action.
But this is a great tool for any warehouse, especially with bulk non-mixed storage types with
a large number of bins.
Regards

Same Storage Unit number for both source & destination storage bin

Hi, I have a requirement to have same Storage Unit number for both source & destination storage bin in transfer order screen.. can any1 suggest how to do it?
An early response is very much appreaciated

Hello,
You absolutely right.
I've made necessary cust. settings berofe posting goods receipt with storage units:
Customizing storage units number ranges:
And storage units customizing:
And also in Material Master:
But i don't see the storage unit type number in storage bin:

Proposal of same destination storage bin as source storage bin

I am using the function module: 'L_TO_PREPARE_ITEM_INT' for finding out the destination bin. But I am getting the same storage bin of source bin for destination bin proposed thru this FM. It doesn't make any sense. How can I avoid proposal of same storage bin. Is there anything to do in configuration or any userexits can be used to avoid this problem.

Hello,
I suspect the issue is from because of Capacity Check Method. Try removing Capacity check Method. If it works fine, then, build the right capacity check method based on your need.
This should solve your problem.
Regards,
Sathish

Creation of New storage bins for storage type 007 in Production

Hi Gurus,
Coudl you please give me a clairty, storage bins can transport from Qaulity or we have to create seperately from server to server like Qulity and production.
thx
r

Hello,
As correctly mentioned storage bins never transported from one environment to other. You have to create through LS10 or LS01N.
The bin structure can get transposted from one environment to other & then you can open the structure & create bins in numbers.The bin structure can be seen through LS10 & created through same transaction.
Regards,
Prashant

Inspection lot creation on storage bin

Hello all,
I am wanting to learn how to create an inpection lot of stock within a storage bin.
I ask because we have many storage bins in our warehouse location storing the same material.
If I do a MIGO 322 transaction in inspection lot there is no where to specify bin location, it looks at the warehouse as 1 storage location.
In the lower half of the migo screen there is a 'storage bin' section but it is blocked out and I cannot identify which storage bin I am wanting to inspect within that storage location.
I know I can create a transfer through LT01 however this still doesn't appear in QA32 inspection lots.
I want the bin location to stay in the same storage location but be flagged for quality inspection.
Thanks,
Chris
Edited by: gmanwizo on May 7, 2011 5:58 AM

Hi,
It seems you have both MM and WM activated. You have to assign storage locations to warehouse numbers in customizing, definition of organization step. Then when you do a 322, transfer requirements will be created by the system and you can transfer the material to a storage bin by turning the requirement into a transfer order. Assignment of new storage locations to warehouses may be tricky, you better ask for consulting on this matter.

More than one Quant in a Storage bin section (Strategy P)

Dear all,
We have a Storage type with Putaway strategy P, the SUT check active but no SU Management active, Mixed storage = X and Addition to stock = X.
For this Storage type, our Storage bin type and SUT we have set up in customizing a Bin sectioning 3 meaning the Storage bin is divided into 3 sections so a maximum of 3 Quants per Storage bin. Note that other Bin sectionings have also been set up.
During testing I found out a Storage bin section can only contain one Quant at a time.
Because of Addition to stock = X we can add more quantities of the same Material/Batch to a Storage bin secion that already contains stock of this particular Material/Batch.
If I try to add a Material/Batch to a Storage bin section that already contains stock of another Material/Batch (so, a different Quant), the system gives me an error:
Bin item X in storage bin Y already occupied
Message no. L3063
Now physically for the mentioned SUT our Storage bin is divided into 3 Storage bin sections/pallet places and on a pallet it should be allowed to put multiple Materials/Batches at a time, that is why we set Mixed storage = X in customizing.
Now we can only put one Quant (so one Material/Batch) in a Storage bin section at a time;
We want to be able to put more Quants into a Storage bin section at a time.
How can we achieve this?
Note we rather donu2019t want to use Storage Unit Management.
Thanks for any clues!
Kind regards,
Bart

Hi Bart,
As a thumb rule you cannot have one quant with multiple Materials. Ofcourse you can keep on adding same material /batch is the same quant i.e. in the same Bin section where you already put the material.
Quick win for your case is Increase the number of quants allowed say 15. In this case you can keep on storing different material / batches on the same pallet but system will keep on generating sections.
At any point of time you can easily track how many quants (Mat + quantity) are stored in that Bin & relevant section.
For strategy P , SUT check must be activated you cannot skip it.
If Business is not ready to work with more number of sections , you can always think of mapping another startegy ..you could do more test with Bulk Storage.
To my knowledge Strategy I i.e. Addition to existing stock with Mixed storage Indicator will work very well here.
You just need to map appropriate Capacity check as startegy I goes with active capacity.
Thanks,
Mahesh

Report to see the value of material at storage bin level

Hi,
The requirement is to see the quantity and value of material stored at storage bin level.
Is there any standard report available to see the same.
thanks

Hi,
Check on it:-
Storage bin should display in MB52
pherasath

Problem in Source storage bin for returs

Hi,
i did PGR for a returns delivery and when i tried to create TO
for the same system is taking the source bin as 000000000 and not the delivery number. i checked the movement type 651 where my entries are correct ie,.. in source storage type i have given 904 and checked the field " source" .
can any body tell me why the system is taking 00000000 as source storage bin rather than the del no............
waiting for ur quick reply.....
thanks

Hi Csaba / rajasekar
i have those requirement tupes maintained correctly.
and further i have gone through OSS notes, it is very helpful.
here i would like bring one more thing to ur notice that this problem i am facing intermittently and not each and everytime.
System is picking up delivery no sometimes and some times it is not.
Further i'll take this oppurtunity to ask u one more question ie...
in OMLR transaction assignment of WM-IM mov types, i have not maintained 601 mov type entry ie,... the entry IMmov type 601 and WM mov type 601 with all the fields in between....but i wonder how the system is allowing me to create TO for the delivery and reverse the same...and even i can find WM mov type 601 in delivery at the time of creating this TO......pls try to anser me how the system is automatically picking this WM mov type and allowing me to create TO........
waiting for ur response

Problem with storage Bin

Dear All,
My request is like
in material master i have assigned Storage bin ( WH2 view ) but at the time of creating Transfer Order if user put different storage bin then system accept that at post the material to other storage bin .... ( not puting material in storage bin mentioned in material master)
i want to block the TO if user mention any different storage bin at the time of creating TO
PL. HELP
With best regards
Suman

Hi
Thanks for your reply
I mention X to Addn to stock but system give same error message
If you have st.pl.str. "Fixed bin", add.to ex.st. must be allowed
MY STORAGE TYPE SETTING ARE AS FOLLOWS
1. OUTAWAY STRATEGY: F
2. STOCK REMOVAL STRATEGY : F
3. TICK ON STOCK REMOVAL REQD CONFIR
4.TICK ON FULL STK RMVL REQD. ACT
5.TICK ON RETURM MATL TO SAME STORAGE BIN
6. TICK ON SUT CHECK ACTIVE
7. TICK ON STORG.SEC.CHECK ACTIVE
please give your valuable suggestion
wuth best regards
Suman

Blocking Storage Bin

Hi experts,
I have question about following situation.
I storage goods in more than one storage bin. My storage strategy find storage bin automaticly. If the first storage bin full, strategy find second storage bin. I want that, system block the first storage bin automaticly till the first storage bin will be empty. System doesnt allow add new goods that quant.
how can i do that?
Thank your support.

Hi Manish,
I explain what i need with example;
I have 2 storage bin for my material. All this bin's capacity is 5 pcs. Now first good issue with PO about 5 pcs. this material putaway first bin. then other good issue 3 pcs. This material putaway 2nd bin. Then i remove material 3 pcs in 1st bin. As a result, i have 2 pcs material 1st bin and 3 pcs material seceond bin. My capacity is 3 pcs 1st bin and 2pcs 2nd bin.
Now, if there is good issue same material, system doesn't allow putaway this materials to 1st bin. System block this 1st bin automaticlly. This block is automatically deleted after the last storage unit has been removed from stock (picked from the row).
By the way, am i need batch management to implement this strategy for this material?
Thanks for advice..

Outbound Delivery created between two different Storage Bins

Dear Guru ,
Using WM can I create an SD Outbound Delivery between two different storage bins linked to the same storage location ?
Thanks

Hi,
Between storage bins only transfer posting is possible as per my understanding.

Storage bin issue -

hi friends
storage bin 01-01-01 stock is 1000 quantity...After PO-GRN all stock is updated in same storage bin 01-01-01...
my querys is i want to fill 100 qty should be filled in 01-01-01 storage bin , if quantity excess means remaining quantity should be
fill in another storage bin 01-01-02 ...
where is the control in wm
pls helpme for this issue
with regards
dinesh
Edited by: code acess on Jun 13, 2011 12:42 PM

HI FRIENDS
I Have the issue, PO order quantity 5000 number. i did GRN.iam trying to do transfer order ..system is update the stock 1000 qty is
updated 01-01-01.. system is automatically remaining quantity 4000 is updates in return stock bin in transfer order..i want to 1000
qty should be updated in 01-01-01 and remainin quantity should be update the sequence of BIN Like 01-01-02.
where i made mistake the configuration....
pls suggest me
with regards
dinesh
Edited by: code acess on Jun 14, 2011 8:51 AM

Report required with Storage Bin

Hi,
I need a report that contains the Material Document number and the Storage Bin. Anyone know of the transaction I can use. I did it a yr ago and it worked so I know it exist, just can't seem to find it again.

Hi
Thanks for your reply
I mention X to Addn to stock but system give same error message
If you have st.pl.str. "Fixed bin", add.to ex.st. must be allowed
MY STORAGE TYPE SETTING ARE AS FOLLOWS
1. OUTAWAY STRATEGY: F
2. STOCK REMOVAL STRATEGY : F
3. TICK ON STOCK REMOVAL REQD CONFIR
4.TICK ON FULL STK RMVL REQD. ACT
5.TICK ON RETURM MATL TO SAME STORAGE BIN
6. TICK ON SUT CHECK ACTIVE
7. TICK ON STORG.SEC.CHECK ACTIVE
please give your valuable suggestion
wuth best regards
Suman

Material count by Storage BIN wise with WM impelementation

Hello,
Users are counting the materials storage-bin wise.
The issue is, there is no WM module, ONLY MM module is implemented.
Whether its possible to design a solution that will allow creation of Physical Inventory documents and performing the same storage bin-wise.
Since its not possible in standard , then whether the enhancement/development to be done or how it can be addressed?
Regards
Sapman man

if any material is just stored in one bin, then you can enter this bin in the storage location view of material master.
MI31 selection screen allows you to create inventory documents for certain bins only.
Further you can sort the items in the inventory document by bin

Storage Bin No same as PO no

Similar Messages

Maybe you are looking for