Storage bin - stock in the past

Hi gurus,
I just would like to know the material, batch and stock quantity I had in determinated storage bin, in the past, for example in May 31th 2008. The system can get me that information ?!
Thank you in advance,
Maicon

Hi,
As per my knowledge there's no such standard SAP transaction. In IM you have MB5B to get stock level on a particular day, but it has no counterpart in WM.
You can use your current stock level (e.g. LX02) for that bin and use LT22 to get all WM-material movements where the source / destination bin is fthe bin which is in question (download the reports in excel > work it up).
Or you can develop an own report...
BR
Csaba
Edited by: Csaba Szommer on Jun 19, 2008 3:59 PM

Similar Messages

Transferring of Storage Bins & Stock in newly Implemented Warehouse

Dear all,
I want to Transfer Storage Bins & Stock in newly Implemented Warehouse.
Here IM is already there i.e there is stock in a IM.
So please suggest.
Regards,
Rock

Hi,
Since you already have stock at IM level follow these steps:
1. Create a dummy SLOC or use existing empty SLOC.
2. Move stock to this SLOC using mvnt type 311
3. Activate WM for current storage location,Deactivate TR creation for 311 mvt type in WM, uncheck negative stock for intrem storage type (922 or 921)
4. Move stock back to WHS and create TOs using mvnt type 999 and transfer stock to respective storage bins. Since the storage bins are huge in number use LSMW tool to upload. Refer below link for better clarity.If the stock is in interim storage type transfer the stock to destination bins with 999 movement type. Thanking you.
http://www.sap-img.com/warehouse/how-to-transfer-stock-to-storage-bin.htm
Edited by: Padmasri Garapati on Oct 11, 2011 1:14 PM

How to remove storage bin stock

our current client wants to empty out stock from storage bin. In inventory management there is no stock exist in storage location, but it is there in storage bin.
Pls suggest ASAP

Hey,
Have a look at LX23 .. might be able to help ?!
thanks,
A
Short text
Stock Comparison Inventory Management / Warehouse Management
Description
Using this report you can generate an inventory comparison between the IM System (Inventory Management) and the WM System (Warehouse Management).
On the selection screen, you can limit the area for comparison by entering the plant / storage location, plant / warehouse number or only the warehouse number.
In addition to specifying the area, you can also determine the extent of information to be issued. Here you have three options:
1. "With bin inventory"
In addition to generating the corresponding stock figures, you can also have a list of the corresponding WM bin quantities included.
2. "All data on material"
Even if only one difference occurs in one of the listed combinatations of material / batch / special stock indicator / supplier, all material combinations are listed. This can be very helpful when searching for errors.
3. "Clear differences"
If you mark this field, the system will generate a batch input session. By starting the batch input session, the differences to be cleared are removed in the IM system. Negative WM stock figures and stock differences in returns will not be cleared.
If you want to have a batch input file generated for the purpose of clearing the differences, it is important, for consistency reasons, that the materials in the respective warehouse are blocked in order that postings affecting stock figures can be prevented.
CAREFUL: If you generate this session, all the material stocks belonging to the respective warehouse number are blocked completely, that is, for the duration of the program, no postings affecting the stock in the warehouse will be possible!
Prerequisites
The comparison is also possible for warehosue numbers managed on a decentralized basis.
Output
You receive a list with various materials. The list contains the following information, for example:
The first line contains the plant, storage location, warehouse number, material number, total stock in inventory management, total stock in the warehouse, and the difference between the stocks.
The following line contains the first combination of batch / special stock indicator / supplier (or sales document and item number for sales order stock) and stock category (Q,R,S, ), the stock figures in Inventory Management, in Warehouse Management, and the difference.
If a batch input session is to be generated, the list contains a note in the log as to whether or not a session has been generated or behind the pushbutton "non-postable stocks", which materials could not be cleared because of negative stock figures or because they belong to returns stock.

Create the stock in storage bin level

Hai all
     while i am doing transfer of order it is asking that storage unit type and the material stock is not maintained in storage bin .
can anybody tell me how to maintain the stock in bin level .please help me is there any tcode for that
regards
satish

Dear Satish
A storage type generally contains several storage spaces or slots. These are called storage bins in Warehouse Management (WM). The storage bin is the smallest available unit of space in a warehouse. The storage bin therefore describes the position in the warehouse where the goods are or can be stored.
Since the address of a storage bin is frequently derived from a coordinate system, a storage bin is often referred to as a coordinate. The coordinate 01-02-03 for example, can refer to a storage bin in row 1, stack 2, and level 3.
You assign each storage bin to a specific warehouse number and storage type according to its location. You must also assign each storage bin to a storage section.
You can also define the following additional characteristics of a storage bin:
         --> Maximum weight
         --> Total capacity
         --> Fire containment section
         --> Storage bin type (for example, for small or large pallets)
With certain stock placement strategies, the storage bin type plays a significant role in optimizing the automatic search for a storage bin in connection with the pallet type. For example, you can define the WM putaway strategy to place large industrial pallets into a specific large bin type and smaller pallets into small bins.
<i><b>For information on how to define storage bins, call up the Implementation Guide (IMG) for Warehouse Management and see under Master Data --> Storage Bins .</b></i>
Generally speaking, you can use any combination of letters and numbers for a storage bin coordinate with the exception of certain alphanumeric characters that are used for stock placement strategy P (according to pallet or storage unit type).
When goods are placed into storage, the system selects coordinates in ascending order according to specific sort criteria, and assigns the next available storage bin based on the coordinate structure you define for creating bins.
Thanks
G. Lakshmipathi

Transport the created Storage Bin Automatic from develop to quality LS10

Hello,
My customer has created a new entry in LS10 u2013 Create Storage Bin Automatically in the development system with a transport order.
He forgot to do Environment u2013 Create bins. I did it with my user in the development system and SAP has created the bins automatically (the system creates and launch a batch-input). The system did not ask me for a transport order (I think because this created data is master data).
The user has transported the transport order from development to quality system but the Storage Bins are not in QAS. I told to the user that the Storage Bin are master data and we has to do Environment u2013 Create bins in each new environment but LS10 transaction has status 'not modifiable' in quality and production system.
There is a way to transport the created Storage Bin Automatically from development to quality and production? Now the user is asking me to have the Storage Bins in quality and production with access LS10 in status 'not modifiable'.
Cheers,
Marta

I could not transport them but I have created the storage bin directly in QAS with LS05 because LS10 is not available.
Thank you very much.

Inspection lot creation on storage bin

Hello all,
I am wanting to learn how to create an inpection lot of stock within a storage bin.
I ask because we have many storage bins in our warehouse location storing the same material.
If I do a MIGO 322 transaction in inspection lot there is no where to specify bin location, it looks at the warehouse as 1 storage location.
In the lower half of the migo screen there is a 'storage bin' section but it is blocked out and I cannot identify which storage bin I am wanting to inspect within that storage location.
I know I can create a transfer through LT01 however this still doesn't appear in QA32 inspection lots.
I want the bin location to stay in the same storage location but be flagged for quality inspection.
Thanks,
Chris
Edited by: gmanwizo on May 7, 2011 5:58 AM

Hi,
It seems you have both MM and WM activated. You have to assign storage locations to warehouse numbers in customizing, definition of organization step. Then when you do a 322, transfer requirements will be created by the system and you can transfer the material to a storage bin by turning the requirement into a transfer order. Assignment of new storage locations to warehouses may be tricky, you better ask for consulting on this matter.

Storage bin not getting cleared

I need your help on an issue regarding inventory block of a particular storage bin due to a material which is no longer existing in that particular bin and has already been consumed.
The user is able to create a new physical inventory document for all the storage bins but one.The only one which she is unable to clear is storage bin no. xxxxx.This particular bin is blocked and showing as inventory active against the old phy. inv. doc.
Looking into the Inventory tab of the bin display transaction, we would see 3 materials, out of which there is a material x which is no stock in that bin. While the other 2 materials y and z are not in Inventory active status. Hence, the only reason why the bin is still showing as blocked is due to material x
I tried using LS06 to unblock the particular bin xxxxx, but was unsuccessful in doing so.

Hi,
While creating JSP custom tags, we start from scratch by first creating tag handler class then .tld file for that and finally deploying both these files.
I am looking for a similar approach for making our own JSF component.
I don't want to put jsf-impl API into lib directory. Is it possible to make a simple component using jstl standard libraries ?
--Sushant

Storage bin available when posting change is not confirmed completely

Dear Gurus, I have a question for you:
My costumer wants to do a posting change when the material is released from QM with a decision usage from Q to unrestricted use. The process is done in two steps: with LU04 the TO is generated and with LT12 is confirmed. When the TO is generated the position is half confirmed. With LT21 we can see the row for the ST (lets say ST 504 Open Storage type) and a second row 922 TR-ZONE. The first row appears green (as confirmed) and the second row appears red (Not confirmed).
My costumer says that " beacause of the strategy given for the storage entry, the storage bin released in the TO (not confirmed completely yet) is available at this moment.
If the storage bin is still physically full, the carrier will found not space for leaving the goods even SAP is telling him there is space available at this storage bin."
I have read that once yo start a TO the storage bin is blocked until the transaction is fully confirmed.
If this is correct I need to demostrate it and I don not find the way to do it.
I hope you understand my explanation and give me any clue.
I appreciate very much some help.
Al

agmogena wrote:
Ok, I will tell you the configuration I have. Lets point in a movement 921 quality to unrestricted use.
> Type Storage origin: 902 EQ and RC flags are set on. (confirmation control for storage type)
> Type storage TR: 922 are set on.
>
> Movement type 921 the flags for Confirm immed and Propose confirm are NOT set.
>
> I do a LU01 to create a intruction to change a material from Q to Unrestricted.
> with LT05 I create the TO.
> At this time if I look LT21 the TO created I see the tag source with two positions one for TS 902 green color and the second 922 in red.
> For the tag of target We can see the first position 922 In red and the second position 902 in green color.
>
> Perhaps this detailed explanation will help you to fully understand the scenario.
>
> Thank you again,
>
> Al.
From the above it isn't entirly clear that the first part of the T.O. is actualy confirmed, my settings are to autoconfirm this so I have no example to look at in my system. Perhaps the display shows the first line green before any actual confirmation..
I assume the stock status has not changed when you first view the T.O.? If the t.o. is partly confirmed I would expect to see the stock status changed and a neg in 922 until the second part is confirmed. Perhaps there is no confirmation at all yet, in LT21 what is the confirmation status? If you view the transfer order header there would be a partial confirmation showing with a yellow triangle, do you see this or no confirmation indicated at all?

Blocking Storage Bin

Hi experts,
I have question about following situation.
I storage goods in more than one storage bin. My storage strategy find storage bin automaticly. If the first storage bin full, strategy find second storage bin. I want that, system block the first storage bin automaticly till the first storage bin will be empty. System doesnt allow add new goods that quant.
how can i do that?
Thank your support.

Hi Manish,
I explain what i need with example;
I have 2 storage bin for my material. All this bin's capacity is 5 pcs. Now first good issue with PO about 5 pcs. this material putaway first bin. then other good issue 3 pcs. This material putaway 2nd bin. Then i remove material 3 pcs in 1st bin. As a result, i have 2 pcs material 1st bin and 3 pcs material seceond bin. My capacity is 3 pcs 1st bin and 2pcs 2nd bin.
Now, if there is good issue same material, system doesn't allow putaway this materials to 1st bin. System block this 1st bin automaticlly. This block is automatically deleted after the last storage unit has been removed from stock (picked from the row).
By the way, am i need batch management to implement this strategy for this material?
Thanks for advice..

Creating dynamic storage bins

When you define a movement type, you can set up the system to create dynamic storage bins in the assigned interim storage area. In this case, the system uses the document number which triggered the stock movement as the coordinates for the interim storage bin.
For example, for a goods receipt, you can set up the system to use the purchase order number as the storage bin coordinates in the interim storage area for goods receipts.
These coordinates only exist as long as the quant is in the interim storage bin; afterwards, they are deleted.
Where do I do the config for the above scenario..
I tried creating bins for interim storage typees in LX20....after creating an interim storage area through referencing standard ones in IMG... I cant understand how the system creates dynamic bins for the movement type. Please help

LX20 is for static bins.
The dynamic ones are created automatically by the system when the stock is moved to the area.
In the movement type configuration in the WM:
(LE -> WM -> Activities -> Define movement types)
Select your movement type and warehouse and make sure the SCR box is checked
Also check that the field is mapped correctly for the dynamic bin in
LE-> WM -> Activities -> Define Requirements
Field Name is what is grabbed

Sap storage bin

Dear All,
Please help me in the following
i want system to find the next empty storage bin..
The Requirement is for 250 stock
Lets say there is 100 stock in Storage Bin - XYZ and 150 stock in ABC Storage bin.
Is there a FIFO Strategy in which system will determine this values
regards
amey kulkarni

come on, use some more words.
.i want this at the time of LT06 transaction
what is this?
next empty bin ? does not make any sense for a stock removal (picking)
FIFO? there are 2 FIFO strategies available, FIFO and stringend FIFO.
check the link to the documentation
http://help.sap.com/erp2005_ehp_05/helpdata/DE/c6/f8457a4afa11d182b90000e829fbfe/frameset.htm

Putaway Block in Storage Bin for any specific Material Code

Hi Experts,
We have a problem, we have allowed mix storage, addition to stock in the storage type, our requirement is this, that we want to block one bin aa-01-01 for some specific material code xxxxx, but we want to allow putaway other material codes to that bin.
How can we achieve this. Can we use LS07 or some other solution. Please suggest at the earliest.
Regards
Ishu

Hi,
In standard system, you can block one specific bin for the specific material with Putaway strategy "Fixed bin" by maintaining this bin in material master. It is unclear that you set "allowed mix storage" and again required material specific putaway in bin.
You can change "Mixed storage" indicator to blank. Which explains "___" Mixed storage is not allowed
All storage units in a storage bin must contain the same material and batch (one quant).
If you don't want to change any of current setting you'll need to use the user exit and maintain custom table where you can maintain specific bin for the material for the warehouse. After determination of the bin to putaway in the standard code you can check if it is conflicting to the entry in your custom table.
Hope this'll help.
Regards,
Sudhir

Storage unit types and storage bin types - Need

Hi,
i want to know what is the use of the storage unit type and storage bin type.
thanks,
Maxx

Dear Maxx,
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/f844694afa11d182b90000e829fbfe/frameset.htm
Storage Bin:
A storage type generally contains several storage spaces or slots. These are called storage bins in Warehouse Management (WM). The storage bin is the smallest available unit of space in a warehouse. The storage bin therefore describes the position in the warehouse where the goods are or can be stored.
Since the address of a storage bin is frequently derived from a coordinate system, a storage bin is often referred to as a coordinate. The coordinate 01-02-03 for example, can refer to a storage bin in row 1, stack 2, and level 3.
You assign each storage bin to a specific warehouse number and storage type according to its location. You must also assign each storage bin to a storage section.
You can also define the following additional characteristics of a storage bin:
Maximum weight
Total capacity
Fire containment section
Storage bin type (for example, for small or large pallets)
With certain stock placement strategies, the storage bin type plays a significant role in optimizing the automatic search for a storage bin in connection with the pallet type. For example, you can define the WM putaway strategy to place large industrial pallets into a specific large bin type and smaller pallets into small bins.
Storage Unit:
In the system, a storage unit record consists of a header and at least one material data record (quant data record).
The header contains information which is relevant for the entire storage unit and includes the:
Storage unit number
Storage unit type (SUT) of the storage unit
Storage bin in which the storage unit is currently located
Status, which provides current information about the storage unit
Specific information about the stock contained in a storage unit is found in the material data record. The material record is already familiar to you in the existing system as a quant data record. For SU management, this information can be managed at the storage unit level.
The following graphics illustrate how WM handles storage bins with and without the use of storage unit management. For these examples, storage bins are displayed in which 200 boxes of red pencils and 50 boxes of blue pencils are stored. The stock is distributed on two pallets.
Hope this will help.
Regards,
Naveen.

Error storage bin

movement type 311
tcode mb1b
from sloc 00
to slco 01
quantity 20 pc
error is coming storage bin Z1 not found
settings i have done in warehouse
in 311
destination storage type   : 921
in material master : stock placement (maintianed)
                                stock removal (maintianed)
                               storage section (maintianed)
search atrategy for storage type (maintained for high rack and goods are to be removed from here )
search strategy removal and Putway BOTH ARE MAINTAINED FOR HIGH RACK AND SHELF STORAGE
Edited by: Rahul Tyagi on Feb 12, 2008 11:56 AM

i have created 4 storage types IN my warehouse Z1 and asigned this Z1 to plant and sotrage location SLOC 00 & SLOC 01 in spro>ep>assignment>le
now both the sloc are assigned to the same warehouse that is z1 so it means boththe sloc have same sotrage area avilable
goods are lying at high rack(storage area) for sloc 00
in material master storage indictor for stock placemnt mentioned sz1
entry in storage type seach is like this
Z1(WH)   E(STOCK REMOVE)    ZSI(STORAGE TYPE INDICATOR)     HIGH RACK (STORAGE TYPE)
FOR STOCK REMOVAL ENTERYS ARE IN STORAGE TYPE SEARCH LIKE THIS
Z1(WH)   A(STOCK PUTWAY)         ZRI(INDICATOR FOR STOCK PUTWAY)       SHELF STORAGE
I HAVE ALSO CREATED THE STORAGE BINS FOR ALL THE STORAGE TYPES
AND POINT TO NOTE IS Z1 IS NTO A BIN ITS THE NAME OF WAREHOUSE
IF ASSIGN INTERIM STORAGE AREA IN 311 N FIELD SOURCE THEN IT WORKS FINE
BUT IF I ASSIGN INTERIM AT DESTI THEN THE ERROR COMES AS GIVEN IN THE VERY BEGI.
AND THE RIGHT WAY IS TO ASSIGN THE SINTERIM IN THE DEST. IN 311
PLEASE SUGGEST THE SOLUTIONI CAN ALSO SEND U THE SCREEN SHOT IF U CAN PROVIDE U RMAIL ID (IF IT IS POSSIBLE FOR U)
Edited by: Rahul Tyagi on Feb 12, 2008 12:08 PM

Ware house management bin stock

Hai SAP guis
In which table storage bin stock will be stored with diffrent stock types like unrestricted ,blocked and quality .
Thanx.

You will not able to directly get the bin stock like MARD in WM. But if you are looking for a getting different stock types with respect WM then you can check LTBP table.
Regards
M.S.KOTI
are your certain what you are talking here?`
How can you get a stock with its status from a transprot request item (table LTBP)?
And I said already that each stock in WM is stored in table LQUA. field BESTQ has the status like unrestricted, blocked or quality.
of course there is not always just one record in Lqua, as the stock may be stored in several bins.
LQUA is the lowest level a stock can have.
it is at this level: material, batch, bin, storage unit, stock status.
whenever one of these charcteristics changes, a new quant is created

Storage bin - stock in the past

Similar Messages

Maybe you are looking for