Storage Bin & storage Loc. via  LSMW

Dear all,
I want to upload sto. Bin & Sto. loc from old sap system to new SAP system via LSMW.
So please provide any link showing step by step method for using LSMW for Sto. BIn & Sto Loc
uploading.
Regards,
Rocky
Edited by: Csaba Szommer on Aug 29, 2011 9:20 AM

Yes you can use LSMW or you can write one BDC which will execute LS01N transaction by reading from file the fields(St type,St bin,St Section, St Bin type,etc) and upload storage bins.
Regards,
Prashant

Similar Messages

  • Problem in Address update for storage location via LSMW

    I am trying to update the address of storage location thru LSMW,
    Normally when i run OX09 i get the "dialogue structure' in LHS panel but when I do the recording of OX09 in LSMW, I am not getting the "Dialogue structure" LHS panel & hence I can't go to the 'Addressees for storage location'
    How to get the ""Dialogue structure" in LHS while recording in LSMW so that I can update the address also.
    Currently my recording only takes me to the create storage location & no LHS 'dialogue structure'  for 'Addressees for storage location'
    Please give the suggestions as I its on urgent for me to update 1000 storage location.

    Dearrrrrrr Prasoooon,
    U got it Right Again!!!!!
    Thank you so much.
    I resolved with above Note & now i can happily go on leave from tomorrow.
    Salute to you!!!!!!!!

  • Automatic Inspection Lot Creation for HUs (storage Loc.) in WHS

    Hi All,
    can someone guide me through customizing/with end result expected from client. How can I setup this configuration.
    The requirement is all Chem.Raw Materilas are subject to Quality inspection with HU managed storage Loc. with WMS.
    Good Receipt is posted Via Vl31n into Quality Stock. Subsequently a Transfer Order will be created & confirmed to transfer of materials from 902 interim storage type to destination storage type and bin. (due to lack of space in the Whse).
    Now expected is that when Usage decision made (Quality Managment) the stock type should change from Q to Unresticted within the same bin and same storage type and material should be made available to issue for orders.
    Also when GR is done 101 mvt. an inspection lot should generate automatically in Whse under the quant.
    Most appreciate your help.
    Regards
    Chandra

    Hi Chandra,
    Generally WM movement type '309' is assigned for posting change (Sap standard setting). This movement type is generally assigned against 321 IM movement type.
    Modify the settings for WM movement type '309' as below:
    Path: LE -> WM -> Activities -> Transfers -> Define Movement types
    - Automatic TO X (activate)
    - Activate 'To item can be confirmed immediately'
    - Activate 'propose confirmation'
    - Activate 'post to same bin'
    This should solve your problem.
    On your other question
    Generally the inspection lot is assosiated with the WM
    stock and Quant if the stock Quality stock is posted to bins directly.
    Please display the Quant using LS23 and let me know your findings.
    Regards
    Madhu

  • Sale Order change BAPI - Storage loc not updated

    Hi Everybody,
    Iam using "BAPI_SALESORDER_CHANGE", to change the sale order items.
    First iam calling above bapi with switch B, for new pricing & then second time for material change.
    When i change any material number, it is getting updated correctly.
    But the storage location, even though iam passing in the bapi it is not updated, & is blank - updation flag is also passed.
    When i execute sale order change again it is updated - ie, for any material change for first bapi call, storage loc is not updated - for 2nd bapi call storage loc is updation - for same input in both the cases.
    Is there any way to update the storage loc is first call of sales order change bapi.
    Below is the parameters iam passing in bapi :
    CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
        EXPORTING
          SALESDOCUMENT      = LS_SALESDOCUMENT
          ORDER_HEADER_IN    = LT_HEADER_IN
          ORDER_HEADER_INX   = LT_HEADER_X
        TABLES
          RETURN                            = LT_RETURN
          ORDER_ITEM_IN               = LT_ITEMS
          ORDER_ITEM_INX             = LT_ITEM_X
          ORDER_CFGS_REF          = LT_CFGS_REF
          ORDER_CFGS_INST         =  LT_PARTS
          ORDER_CFGS_VALUE     = LT_VALUES
          ORDER_CFGS_BLOB        = LT_CUBLOB
          ORDER_CFGS_VK            = LT_CUVK
          ORDER_CFGS_REFINST   = LT_CUREF
          SCHEDULE_LINES            = LT_SCHEDULE_L
          SCHEDULE_LINESX         = LT_SCHEDULE_X
          ORDER_TEXT                   = LT_TEXT
          CONDITIONS_IN                = LT_CONDITION_L
          CONDITIONS_INX              = LT_CONDITION_X.
    Any help is appreciated.
    Regards,
    Nagarajan.J

    Hi,
    Storage location is updated only when same sale order bapi is called another time with required details.
    rgs,
    Nagarajan J

  • What is the use of Storage loc.ref.in LE-WM Interface to Inventory Managemt

    Hi Guys
    What is the use of below fields
    Special movement indicator for warehouse management and Storage loc. ref.
    In the WM configaration LE-WM Interface to Inventory Management
    How we can do the below scenario with this configaration
    I have 3 scenarios all scenarios have MIGO and placing stock to WM
    2 scenarios requres Immediate TO creation after MIGO 101 mvt type
    But last scenario does not want Immediate TO ,it is having another Z transaction to create TO
    But problem is for the last scenario also creating Immdiate TO after MIGI 101
    How to avoid this Immdiate TO for this scenario
    And How to allow it for first 2 scenarios
    How we can to with that configaration

    Hello ,
    It is not possible directly in customising as all three cases are using the same Mvt Type.
    Alternate Solution :
    You may try an by creating a new Mvt Type 901 i.e making a copy of 101.
    Thereafter try to link a new Ref Mvt Type to the same .You should use this case for the third scenario.
    This may resolve your problem.
    Regards
    Ramesh Ch

  • During GR against Process Order Storage loc. not appearing

    He Experts,
    I am trying to do goods receipt against process order for bulk material using MIGO.
    But under where tab in MIGO storage loc field is not appearing. For this material production storage location is maintained in MRP2 view & in material type customizing both quantity & value field is selected for a given plant.
    Can you please explain why this field is not appearing? Is there any other customizing behind this? During migo 101 movement type (GR for acct. assgt.) is appearing in moveent type field.
    Thanks in advance,
    Vijay.

    Hi,
    OK,You are trying to do GR for a materisl which is defined as Bulk Material (Can be done in BOM or Material master).
    You said , there is no stock appearing for this material in this Storage location.
    Check one thing,
    go to MMSC and find out whether the storage location is maintained for the material or not?
    if your Storage location is not appearing in the list, maintain it there.
    Create a new Process order/productrion order  and check
    Regards
    Ratan

  • Storage loc required to appear automatically at the time of GR

    Hi, wants system to propose default storage loc of roh materials in migo screen. pls advise is it possible to set in sap? pls note pr's are generated thru mrp. pls advise.

    Dear,
    Storage location will pickup from MRP2 view if you want for good issue against production order the please maintain the Production storage location in MRP 2 view or in BOM component.
    If it is for the purchase material then miantain the EP storage loacation in MRP 2 view.
    Please try and come back.
    Regards,
    R.Brahmankar

  • Two  Warehouse can Assigned to one Storage Loc

    Dear All,
    Is it possible having :
    "Two  Warehouse can Assigned to one Storage Loc  ?????"
    If yes how it can be achieved.
    Regards,
    Rocky
    Edited by: Csaba Szommer on Sep 8, 2011 7:46 AM

    Hi
    Yes...we can do in enterprise structure assignment.>le....
    Plant sloc warehouse...
    Kuber

  • Material Transfer from Storage Location 2 Storage loc

    Hi Gurus,
    Here Client want to transfer Material from 1 loc to another. Std T Code is MB1B with Mov Type 309. But here we have to enter material, qty,& batch no.But client's requirement is that he dont want  to enter all these things.He want to select the material,batches collectively sothat seperate entry should be minimised. Is there any functionality through which we can transfer the selected materials?
    Please reply soon its urgent.
    Regards,
    Mayur

    Hi mayur
    First of all 309 movement is ussed for Material to material transfer
    like our friend said for storage loc to storage loc. you need to use 311
    Now when you go to MB1B then goto Edit in that you can see default value
    enter your default value , so after that you need to choose only material and batch
    collectively
    Thanks
    Bala

  • Error in picking material from storage loc.

    Hi Experts,
    I am creating a delivery w.r.t sales order. i am getting this following error.
    Material SRCBULK does not exist in plant GC01
    Message no. VL411
    I have checked the message and its corresponding upgrades. Its already there as i am having ECC 6.0 EHp1
    The material is already entended to storage loc and plant. Also there is sufficient stock.
    Please let me know if there is any config changes.

    Hi KC,
    Go though the link given below, It will help you out.
    Material F001TD does not exist in plant HDQF
    Regards,
    MT

  • Change storage loc in Sales order PO

    Hi to all,
                   Please help me in solving this problem, actually we have created a PO by referring a Sales Order PR with Acc cat-> 'X' and Item Cat-->'S', now the user wants to Change the Storage loc, but the storage loc is grayed out that is non editable, i want to know whether this is a standard functionally of thirdparty PO with item category 'S'  or else any configurational changes need to be done. for your information the PO is manual PO, I searched all over the scn i could not able to find it plz if this question is already posted plz let me know the link of the question .
    Thanks in advance

    Yes. It is a standard behavior. You can't use the storage location field for item category S.
    Its because, the material will direct goes to delivery address location instead of storage location.
    Normally, system will not accept storage location for the PO line item which has the item category S.
    If you want to keep the storage location for your reporting purpose, then you can use the storage location field as per your requirement.
    Go to path OLME-Purchase Order-Define Screen Layout at Document Level. Double click on PT5F field selection group.
    then double click on Basic Data, Item.
    Then make the storage location as per your requirement (Optional or required).
    Then you can able to enter or change the storage location in ME21N or ME22N.
    But remember, it will not effect at the time of MIGO.

  • Prod storage loc field in mrp2 view

    Hi, as i understand materials are stored in mm storage locations. from mm storage locations, materials will be issued to production orders. in this case why we need prod storage loc filed in mrp2 view of the material master? please advise in which scenario we need to use this field? is it necessary to define prod storage loc in discreate manufacturing? thank you all for your support.

    Dear ,
    Find the answer of your questions:
    1. why we need prod storage loc filed in mrp2 view of the material master?    It is nothing but a intrim stroge location between Store and Shop Floor specially nearby the Production Line from where componenet  are issued or back flashed  based on the SAP set up of Issu Storage Loaction Priority .
    Basically , if you want a SFG material to be issues to FG after in-house production of the SFG  and also want to keep some of the Bulk Item or common item which can be  issued immediatly upon reservation rather going to MMD store , then one way it will save your time .
    2.please advise in which scenario we need to use this field?   In case you have SFG/Bulk Item /Low value stock item which are utilised now and then in productiion line or in a group of work centre  and you want to material  can be picked up immediately as it near the operation line , then you have a facility to stock material called Issue or Production Storage Loaction .
    3.is it necessary to define prod storage loc in discreate manufacturing  It is not necessary .But REM  is is useful for Back Flashing iteem.For FG in house producted item , you can receive the material specifically as SFG/FG store to diffierentiate from others  .Some time , you can use the same to store the Sales Order stock based on MTO-Discrete Manufactruing for an cutomer order .
    Check my posting in this thread : Production Storage Location
    Hope this is helpful
    Regards
    JH

  • Relation between storage loc and workcenter/resource

    Dear Gurus
    My client wants that whatever materials (fert) coming out from a particular workcenter/resource should be posted to a particular storage location.And that the system should propose the storage location while posting of goods.Can a storage location be assigned for any workcenter/resource.
    Regards
    Sandip Sarkar

    Hi,
    2 suggestions:
    1. I presume you have created different routings / group counters within the same routing each specifying the different work center from which you can assemble / manufacture the final product.
    Now create different production versions, by specifying the routing & bom details in the PV. Also in the PV, in the section Other Data, you will find a field called Receive Location, here specify the storage loc. relevant for each work center.
    Now when you create the order, read the production version which is relevant i.e. depending on the work center, then once the order is completed system will post the stock to the SLoc which you have pre-defined.
    2. Use BADi - WORKORDER_UPDATE, method - AT_SAVE or use User exits PPCO0006 or PPCO0007. Create a Z table with Work center and Sloc & this enhancement you can refer to the work center and assign the relevant SLoc, discuss with your abaper.
    Regards,
    Vivek

  • The Wifi storage options are interesting but it seems they only allow to read files from the device on the iPad but not transfer files to the storage device via WiFi.   I'm looking for a possibility to use the iPad for photography while traveling, without

    the Wifi storage options are interesting but it seems they only allow to read files from the device on the iPad but not transfer files to the storage device via WiFi.
    I'm looking for a possibility to use the iPad for photography while traveling, without the access to a computer.
    Shooting photo's in RAW format crates pretty big files that will fill up the iPad's memory pretty fast if you shoot a lot during a (let's say) month long trip.
    my idea was to use load the photo's to the iPad so i could view them and sort out any bad ones. then copy them over to the storage device so i can continue using my CF cards for shooting. I have an image thank for copying the photo's directly to the HDD but it would be so sweet to be able to check them on the iPad before hand.
    any suggestions?

    Check out pogo plug device, it allows you to upload camera roll via wifi.

  • Storage loc for GR

    Hello,
    I have a Finished product A and it has semi finished product B and B has component C.
    In the bom of A , the storage loc mentioned for B is '001' but the same storage loc. does not appear as default in proces order  for B for goods receipt.
    Can i do the GR of B in different storg loc than 001 ?
    What seetings i need to chk ?
    Regards
    Shankar R

    Dear,
    In the process order header , go to tab Goods Recpt and use the storage location field in this screen for defaulting the storage location for automatic goods receipt of the finished material. You can also chech this storage loaction if extended through MMSC.
    You have two additional places where you can maintain the issuing storage location for the components, different from the material master that is used for auto GR: in the detail section of the BOM item --> status tab --> further data, or in the production version. Or MRP 2 view.
    For details please rfer this link,
    Re: storage location
    Regards,
    R.Brahmankar

Maybe you are looking for