Storage bin type and storage unit type.

Hi,
Can anyone explain what is the differnce between the staorage bin type which is maintaine for storage bins and the storage unit type which is maintained in material master.
Can any one correct me that My material storage unit type is maintained in TT and the storage bin for put awayis maintained in PC (storage bin type).
is this the right way to be adapted.
Sunil

Hi,
THe storage unit type is a description of how the material is stroed in the storage bin.
Some bins may not able to allow a full pallet due to height restrictions,but a half-pallet may fit.so warehouse can define a storage unit type that defines a half-pallet and qty of the material that can fit on that half-pallet.
Configuration menu path:IMG-logistics Execution-Warehouse Management-master data-material-define storage unit type.
where as storage bin is the lowest level of storage defined in the warehouse.
With Regards,
Jaheer.

Similar Messages

Storage unit types and storage bin types - Need

Hi,
i want to know what is the use of the storage unit type and storage bin type.
thanks,
Maxx

Dear Maxx,
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/f844694afa11d182b90000e829fbfe/frameset.htm
Storage Bin:
A storage type generally contains several storage spaces or slots. These are called storage bins in Warehouse Management (WM). The storage bin is the smallest available unit of space in a warehouse. The storage bin therefore describes the position in the warehouse where the goods are or can be stored.
Since the address of a storage bin is frequently derived from a coordinate system, a storage bin is often referred to as a coordinate. The coordinate 01-02-03 for example, can refer to a storage bin in row 1, stack 2, and level 3.
You assign each storage bin to a specific warehouse number and storage type according to its location. You must also assign each storage bin to a storage section.
You can also define the following additional characteristics of a storage bin:
Maximum weight
Total capacity
Fire containment section
Storage bin type (for example, for small or large pallets)
With certain stock placement strategies, the storage bin type plays a significant role in optimizing the automatic search for a storage bin in connection with the pallet type. For example, you can define the WM putaway strategy to place large industrial pallets into a specific large bin type and smaller pallets into small bins.
Storage Unit:
In the system, a storage unit record consists of a header and at least one material data record (quant data record).
The header contains information which is relevant for the entire storage unit and includes the:
Storage unit number
Storage unit type (SUT) of the storage unit
Storage bin in which the storage unit is currently located
Status, which provides current information about the storage unit
Specific information about the stock contained in a storage unit is found in the material data record. The material record is already familiar to you in the existing system as a quant data record. For SU management, this information can be managed at the storage unit level.
The following graphics illustrate how WM handles storage bins with and without the use of storage unit management. For these examples, storage bins are displayed in which 200 boxes of red pencils and 50 boxes of blue pencils are stored. The stock is distributed on two pallets.
Hope this will help.
Regards,
Naveen.

Difference between Storage Unit type and storage type

Hi,
I am confused with storage unit type and storage type.
Can anyone help me with real case examples.
I would like to know about Storage unit types and their uses in WM.

Hello!
Storage type is a storage area and Storage Unit Type is strategies are used in the warehouse process for creating transfer orders.
A storage type is a storage area, warehouse facility, or a warehouse zone that you define in Warehouse Management (WM) for a warehouse number. This is a physical or logical subdivision of a warehouse complex that is characterized by its warehouse technique, the space used, its organizational form, or its function. A storage type generally contains several storage spaces or slots. These are called storage bins in Warehouse Management (WM).
See also:
https://wiki.sdn.sap.com/wiki/display/ERPSCM/WMOrganisationalStructure
http://help.sap.com/saphelp_470/helpdata/en/c6/f838f94afa11d182b90000e829fbfe/content.htm
Storage Unit Type is putaway strategy, the system processes different storage unit types (for example, pallets) and allocates them to the appropriate section. Often, one storage bin is divided into several smaller sections. Typically, only the same storage unit types can be placed into a storage bin at one time.
See also:
http://wiki.sdn.sap.com/wiki/display/ERPSCM/PutawayandRemovalStrategiesin+WM
http://help.sap.com/saphelp_470/helpdata/en/c6/f844c44afa11d182b90000e829fbfe/content.htm
Milca

Storage Type and storage bin in MB26 pick list

Hi,
We want to print a pick list using MB26. The pick list should contain the warehouse number , storage type and storage bin. I have found that in the layout of MB26 pick list, we can pull these fields. However, the values of these fields are not getting pulled in the list.
Can you please help me to understand if I need to do some setting/config so that warehouse number, storage type and storage bin can be pulled in the MB26 report.
Thanks,
Shekhar

if it is a standard output if you go to the output type you can see what are the standard fields included in the pick list but if it is a custom one please contact your functional consultant who designed or look at the spec to see the design/mapping of fields.
Please let me know if thhis helps.

LT04 - User exit to add storage type and storage bin

Hi!
I am looking for a user exit to populate the destination storage type and storage bin (Fields-LTAP-nltyp and LTAP-NLPLA). The user uses tcode LT04 to createt transfer orders from transfer requirements.
The program name is SAPML03T.
Please let me know if anyone has any clue.
Thanks in advance,
Manasa
Message was edited by:
        manasa

I don't the exact User-Exit...And there are like 104 of them...So why don't you use this report (Not mine) and find out yourself -:)
REPORT zdummy_atg_2.
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
    SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
    TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
    SELECT SINGLE * FROM TADIR
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'PROG'
    AND OBJ_NAME = TSTC-PGMNA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    IF SY-SUBRC NE 0.
      SELECT SINGLE * FROM TRDIR
      WHERE NAME = TSTC-PGMNA.
      IF TRDIR-SUBC EQ 'F'.
        SELECT SINGLE * FROM TFDIR
        WHERE PNAME = TSTC-PGMNA.
        SELECT SINGLE * FROM ENLFDIR
        WHERE FUNCNAME = TFDIR-FUNCNAME.
        SELECT SINGLE * FROM TADIR
        WHERE PGMID = 'R3TR'
        AND OBJECT = 'FUGR'
        AND OBJ_NAME EQ ENLFDIR-AREA.
        MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
      ENDIF.
    ENDIF.
    SELECT * FROM TADIR INTO TABLE JTAB
    WHERE PGMID = 'R3TR'
    AND OBJECT IN ('SMOD', 'SXSD')
    AND DEVCLASS = V_DEVCLASS.
    SELECT SINGLE * FROM TSTCT
    WHERE SPRSL EQ SY-LANGU
    AND TCODE EQ P_TCODE.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) P_TCODE,
    45(50) TSTCT-TTEXT.
    SKIP.
    IF NOT JTAB[] IS INITIAL.
      WRITE:/(105) SY-ULINE.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
* Sorting the internal Table
      SORT JTAB BY OBJECT.
      DATA : WF_TXT(60) TYPE C,
      WF_SMOD TYPE I ,
      WF_BADI TYPE I ,
      WF_OBJECT2(30) TYPE C.
      CLEAR : WF_SMOD, WF_BADI , WF_OBJECT2.
* Get the total SMOD.
      LOOP AT JTAB INTO WA_TADIR.
        AT FIRST.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 SY-VLINE,
          2 'Enhancement/ Business Add-in',
          41 SY-VLINE ,
          42 'Description',
          105 SY-VLINE.
          WRITE:/(105) SY-ULINE.
        ENDAT.
        CLEAR WF_TXT.
        AT NEW OBJECT.
          IF WA_TADIR-OBJECT = 'SMOD'.
            WF_OBJECT2 = 'Enhancement' .
          ELSEIF WA_TADIR-OBJECT = 'SXSD'.
            WF_OBJECT2 = ' Business Add-in'.
          ENDIF.
          FORMAT COLOR COL_GROUP INTENSIFIED ON.
          WRITE:/1 SY-VLINE,
          2 WF_OBJECT2,
          105 SY-VLINE.
        ENDAT.
        CASE WA_TADIR-OBJECT.
          WHEN 'SMOD'.
            WF_SMOD = WF_SMOD + 1.
            SELECT SINGLE MODTEXT INTO WF_TXT
            FROM MODSAPT
            WHERE SPRSL = SY-LANGU
            AND NAME = WA_TADIR-OBJ_NAME.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          WHEN 'SXSD'.
* For BADis
            WF_BADI = WF_BADI + 1 .
            SELECT SINGLE TEXT INTO WF_TXT
            FROM SXS_ATTRT
            WHERE SPRSL = SY-LANGU
            AND EXIT_NAME = WA_TADIR-OBJ_NAME.
            FORMAT COLOR COL_NORMAL INTENSIFIED ON.
        ENDCASE.
        WRITE:/1 SY-VLINE,
        2 WA_TADIR-OBJ_NAME HOTSPOT ON,
        41 SY-VLINE ,
        42 WF_TXT,
        105 SY-VLINE.
        AT END OF OBJECT.
          WRITE : /(105) SY-ULINE.
        ENDAT.
      ENDLOOP.
      WRITE:/(105) SY-ULINE.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No.of Exits:' , WF_SMOD.
      WRITE:/ 'No.of BADis:' , WF_BADI.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : WF_OBJECT TYPE TADIR-OBJECT.
CLEAR WF_OBJECT.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
READ TABLE JTAB WITH KEY OBJ_NAME = SY-LISEL+1(20).
MOVE JTAB-OBJECT TO WF_OBJECT.
CASE WF_OBJECT.
    WHEN 'SMOD'.
      SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    WHEN 'SXSD'.
      SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
      CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Greetings,
Blag.

CO27 is showing blank values in Warehouse,Storage Type and Storage Bin

Hi Gurus,
I am using CO27 to generate pick-list for a production order. The pick-list is being used by Warehouse team to Goods Issue for the Production Order.
However, the problem that I am facing is that in the pick-list generated from CO27 is showing blank values in Warehouse,Storage type and Storage bin.
So, it is becoming difficult for the Warehouse to do the picking based on this pick-list.
Could you please advice how the fields Warehouse,Storage Type and Storage bin can be populated in the Production Order pcik-list.
Is these values are fetched from Material Master data or any other place?
Thanks & Regards
Subhasis

Hello
You should implement the following note:
384427 - CO27/COIK: Storage bin is not displayed
BR
Caetano

What is storage type and storage bins

explains the terms, storage type and storage bins, stock at production storage

Hi Ahmed
Inventory Managemenet can be done either at Storage location ( using Lean warehouse Management)or at storage bin level ( using full warehouse Management).
General ( EWM)
[http://help.sap.com/saphelp_scm50/helpdata/en/5f/c69040bca2ef4ae10000000a1550b0/frameset.htm]
Storage type
[http://help.sap.com/saphelp_ewm2007/helpdata/en/97/d94541c47a6e24e10000000a155106/content.htm]
Storage bin
[http://help.sap.com/search/highlightContent.jsp]
[http://help.sap.com/saphelp_sm32/helpdata/en/35/26c132afab52b9e10000009b38f974/content.htm]
Cheers !!
Ajay

LT06 enhancement - How to update Storage type and Storage section

Hi,
My requirement is to update Storage bin, Storage type and Storage section, while creating Transfer order from through LT06. So I used the enhancement MWMTO003 to update Storage Bin in LT06 and it is also working.
Similarly I need to update Storage type and Storage section using userexit or BADI.
Is there any way to update Storage type and storage section in LT06?

Check enhancement MWMTO007.
regards

'Person Type' and 'Organizational Unit' symbols in BPMN?

What is the purpose of 'Person Type' and 'Organizational Unit' symbols in BPMN diagrams? If I place any of those two into my diagram, I can't connect either to anything else.
I think those symbols simply don't belong in BPMN. My wild guess would be that someone simply forgot to remove them from the Symbols toolbar.

Hello all,
this is not a bug - although the idea behind it is a little bit hidden. Sidda you're right, the object cann't be connected with the standard BPMN object types within the BPMN diagram of the BPA Suite. On the other hand the mentioned objects can be conected with a function but only on an EPC diagram (and from an EPC derived diagram types).
Within the BPMN it is slightly more complicated. Due to the fact that the BPMN implementation within the BPA Suite is not 100% OMG compliant (in the actual version 10.1.3.3) the appearance is a little bit mixed.
Never the less, the mentioned objects can be used. You simply have to create a relationship between the object types (e.g. person type, organizational unit) with a pool or a lane. Based on this you can create ARIS like relationships inside of the repository. The reason for that is that you are capable to link the BPMN artifacts with the proprietary ARIS world. For analysis purposes this is very powerful.
Regards
Dirk
Message was edited by:
DirkStaehler

Sap notes for 103 movement type and 105 movement types in sap

Hi all,
Please let me know if there are any sap notes for 103 movement type and 105 movement type in sap as soon as possible
points will be awarded.
thanking u in advance,
srinivas.

There are many SAP notes related to these movement types e.g 514609,750836,
533833, 808029, 317823,etc.
You can search them at http://service.sap.com
Regards,
Amit

Urgent - Idoc type and the Message type

Hello
Its very urgent. I want to know the basic idoc type and the message type used for EDI 894 transmission (Delivery / Return Base Record). Please respond at the earliest.
Thanks in advance

HI
Pratibha
How are you ?
Please check the below links:
http://scn.sap.com/thread/990524
http://www.erpgreat.com/pm003.htm
http://scn.sap.com/thread/1386811
http://scn.sap.com/thread/1078741http://www.erpgreat.com/plant/what-is-equipment-master.htm
http://benxbrain.com/en/index.do?onInputProcessing%28brai_object_thread%29&001_threadid=0000835100&001_boardtype=01&sysid=PI1&pgmid=R3TR&object=TABL&obj_name=EQBS&child_param=
Mutti

Function module related to procurement type and special procurement type

Hi Gurus,
Is there any function module related to procurement type and special procurement type?
Regards
Rajib

Dear Rajib,
What is your exact requirment?do you want to find out the list of materials based on procurement type
and special procurement type?
You can get the details from the table MARC.
Regards
Mangalraj.S

Settings for the relation of requirement type and planned order type

Dear Gurus
Where we maintain the settings for the relation of requirement type and planned order type?Actually I have maintained strategy 60 for a particular material (planning material) so the requirement type is vsev and along with that the planned order type is coming is vp i.e non convertible planned order.That is ok the system is behaving right.But nowhere I can find the setting of vp with vsev how the system is picking vp?
Regards
Sandip Sarkar

Hi!,
That is an inbuilt sytem setting and you can't change that.
Regards,
Uday

About value type and key figure type

Hello Gurus,
please explan the different usage of about value type and key figure type. what is the typical values for both infoobjects ?
Many thanks,
Frank

Hi,
0METYPE is a key figure-specific info object usually used to define semantics of the individual business key figures in BW (for example, actual, commitment, plan, target values).
Its a bi specific field which is filled from extract structure field named MEASTYPE table COSR
Refer to OSS Note 523742 for how it is filled and the following link for additiona information.
http://help.sap.com/saphelp_nw70/helpdata/en/91/ddd52b9ef30645a338e28aae443807/frameset.htm
Note 523742 - BCT-CO: BW key figure model and R/3 tables for trans. data
This note provides information on the key figure model in the area of BW Content CO-OM. It also gives an overview of the DataSources for transaction data and the corresponding source tables and value fields in the R/3 System.
The key figure model for currency fields in the area of CO-OM contents affects the following info object of type key figure:
0AMOUNT Amount
The key figure itself does have any business semantics.
The semantics of the individual business key figures in BW (for example, actual, commitment, plan, target values) is determined using combinations of values for the following key figure-specific info objects (see also the account model in SEM-BPS, note 407563):
0METYPE Key figure type
0VTYPE Value type for reporting
--> 0VTDETL Details of the value type
--> 0VTSTAT Statistics indicator for the value type.
For example, using transaction SE16, the possible characteristics of the values of this InfoObject can be taken from the above-mentioned master data tables in R/3.
The business key figures on the InfoCubes of the standard BW content were defined as restricted key figures using this semantics of the key-figure-specific characteristics.
The conversion of the R/3 transaction data in the BW key figure model is carried out in the extractors using the ROMI_GET_VTYPE_AND_DETAIL function module. It primarily happens using the specified conversion tables.
The following dependencies exist for the source tables of the DataSources:
COSP_VTYPE for COSS, COSP, COVP,
COSB_VTYPE for COSB,
BPXX_VTYPE for BPGE, BPJA, BPEE
If an R/3 source record cannot be converted using these tables, it may not be extracted to BW.The application log of the R/3 DataSource transaction RSA3 contains entries for the unconverted values after the test run.(The log function for the CO-OM DataSources was considerably improved by the correction for note 523655).
The application log for the extraction runs from BW can be evaluated using transaction SLG1 (Object: RSAP, object information: RSAP_INFO)
Furthermore, the semantics of a key figure are still determined by the time characteristics and the following key-figure-specific info objects:
0CURTYPE Currency type (for more information, see note 517909),
0DB_CR_IND Debit/credit indicator (for more information, see note 065075),
0VERSION CO version
-Vikram

Psa type and psa non type

HI,
anybody let me know , IN BI we have PSA TYPE and PSA NON TYPE CHECKBOX what is that??
and where to find?? and why they maintain???
Thanks
Asim

Hi Asim,
Could you please give more details? Like on which screen do you get this check box? Which version of SAP-BI are you using?
Regards,
Rashmi

Storage bin type and storage unit type.

Similar Messages

Maybe you are looking for