Storage bin Type Change during TO creation

Hi friends
Is it possible to change Storage Bin type (Not Storage bin no)during Transfer Order (TO) creation in LT06 / LT04 ? If so please let em know the procedure to bring storage bin type during TO creation.
Please confirm
Rgds
Madhavan

Hi,
Please check and try to define Storage Bin Type (SPRO->LE->master data->storage bins), then activate Storage Bin type search strategy in OMM1.as appropriate. (in my past experience system given priority to Storage type search and then to Storage BIn type search during picking- I am not sure whether this is the SAP logic or priority).
Once you define and assing the Storage bin type to Bins this will be available during creation of TO.
Hope this helps.
Thx
MJ

Similar Messages

Storage Bin Type Search

This question relates to teh storage bin type search.
When a storage bin type is assigned to a number of different storage unit types, when the systen is trying to putaway a material, does it assign preferentially according to how storage unit types are listed in this table or when finding the next empty bin, does it simply check this table to make sure that the storage bin type is compatible with the storage unit type. For example, if the storage unit type is a half pallet and the next empty bin can hold both a full pallet and a half pallet, will the system try and find a half pallet space or will it simply place the SU into the full pallet space.

Hi,
It will work like this in the material master palletization data you will assign the Storage unit type and in OMM1 you will assign the storage unit type to the storage bin type (search criteria).
So if you have HP, then in the storage type it is next empty bin it fin the FP and then HP, system will place it in the HP only.
thanks,
JK

Storage bin type and storage unit type.

Hi,
Can anyone explain what is the differnce between the staorage bin type which is maintaine for storage bins and the storage unit type which is maintained in material master.
Can any one correct me that My material storage unit type is maintained in TT and the storage bin for put awayis maintained in PC (storage bin type).
is this the right way to be adapted.
Sunil

Hi,
THe storage unit type is a description of how the material is stroed in the storage bin.
Some bins may not able to allow a full pallet due to height restrictions,but a half-pallet may fit.so warehouse can define a storage unit type that defines a half-pallet and qty of the material that can fit on that half-pallet.
Configuration menu path:IMG-logistics Execution-Warehouse Management-master data-material-define storage unit type.
where as storage bin is the lowest level of storage defined in the warehouse.
With Regards,
Jaheer.

Storage unit types and storage bin types - Need

Hi,
i want to know what is the use of the storage unit type and storage bin type.
thanks,
Maxx

Dear Maxx,
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/f844694afa11d182b90000e829fbfe/frameset.htm
Storage Bin:
A storage type generally contains several storage spaces or slots. These are called storage bins in Warehouse Management (WM). The storage bin is the smallest available unit of space in a warehouse. The storage bin therefore describes the position in the warehouse where the goods are or can be stored.
Since the address of a storage bin is frequently derived from a coordinate system, a storage bin is often referred to as a coordinate. The coordinate 01-02-03 for example, can refer to a storage bin in row 1, stack 2, and level 3.
You assign each storage bin to a specific warehouse number and storage type according to its location. You must also assign each storage bin to a storage section.
You can also define the following additional characteristics of a storage bin:
Maximum weight
Total capacity
Fire containment section
Storage bin type (for example, for small or large pallets)
With certain stock placement strategies, the storage bin type plays a significant role in optimizing the automatic search for a storage bin in connection with the pallet type. For example, you can define the WM putaway strategy to place large industrial pallets into a specific large bin type and smaller pallets into small bins.
Storage Unit:
In the system, a storage unit record consists of a header and at least one material data record (quant data record).
The header contains information which is relevant for the entire storage unit and includes the:
Storage unit number
Storage unit type (SUT) of the storage unit
Storage bin in which the storage unit is currently located
Status, which provides current information about the storage unit
Specific information about the stock contained in a storage unit is found in the material data record. The material record is already familiar to you in the existing system as a quant data record. For SU management, this information can be managed at the storage unit level.
The following graphics illustrate how WM handles storage bins with and without the use of storage unit management. For these examples, storage bins are displayed in which 200 boxes of red pencils and 50 boxes of blue pencils are stored. The stock is distributed on two pallets.
Hope this will help.
Regards,
Naveen.

Assigning storage bin type to storage unit type

Hello guys,
I would like to know the purpose of assigning the storage bin type to storage unit type in the storage bin type search table.
Thanks,
Maxx

Hello Maxx,
First let's understand what is the meaning of "Storage unit type"
Storage unit type is type of pallet i.e. big pallet, small pallet, industrial pallets etc so all this pallets have standard sizes.
Now let's understand what is the meaning of "Storage Bin type"
Storage bin type the classification of storage bin according to their characteristic /size i.e. 1 meter bin, 2 meter bin , 4x2 bin etc
Now if you have requirement that 1 meter bin should allow only small pallets not big pallet becuase it can not be fit in 1 meter bin so you can restrict this by assigning storage bin type to storage unit type.
Hope this will help you to understand the concept for assigning Storage bin type to SU type.
Regards
Arif Mansuri

Storage bin type

hello all
I would like to know whether one bin type say for example a bin type e1 can be used for one material ( aluminium) which has different structures like square, rectangle, round. Pl. post any documents or links related to it.
Thanks,
Maxx

Hi All,
Basically, the Storage Bin Type talks about the Bin Capacity (such as how many stacks you can have or how maximum you can store in the storage bin etc...)
Bin type doesn't depend on the shape of the material (round or square or pie) as long as it fits into the bin, and you should be in a position to take the Bin dimensions.
Aktar

Document type change during fee calculation

Hi SLCM gurus,
Our customer wants to change document type for spesific type of students during the fee calculation.
Is there a badi or event to change the document type for a spesific situation?

Hi,
You can enhance event P903 maling a copy of FM CMAC_SAMPLE_P903 to change the document type.
Hope this helps you.
Regards.
Cristóbal.

OVM 3.3.1: NFS storage is not available during repository creation

Hi, I have OVM Manager running on a separate machines managing 3 servers running OVM server in a server pool. One of the server also exports a NFS share that all other machines are able to mount and read/write to. I want to use this NFS share to create a OVM repository but so far unable to get it to work.
From this first screen shot we can see that the NFS file system was successfully added under storage tab and refreshed.
https://www.dropbox.com/s/fyscj2oynud542k/Screenshot%202014-10-11%2013.40.00.png?dl=0
But its is not available when adding a repository as shown below. What can I did to make it show up here.
https://www.dropbox.com/s/id1eey08cdbajsg/Screenshot%202014-10-11%2013.40.19.png?dl=0
No luck with CLI either. Any thoughts?
OVM> create repository name=myrepo fileSystem="share:/" sharepath=myrepo - Configurable attribute by this name can't be found.
== NFS file system refreshed via CLI ===
OVM> refresh fileServer name=share
Command: refresh fileServer name=share
Status: Success
Time: 2014-10-11 13:28:14,811 PDT
JobId: 1413059293069
== file system info
OVM> show fileServer name=share
Command: show fileServer name=share
Status: Success
Time: 2014-10-11 13:28:28,770 PDT
Data:
FileSystem 1 = ff5d21be-906d-4388-98a2-08cb9ac59b43 [share]
FileServer Type = Network
Storage Plug-in = oracle.generic.NFSPlugin.GenericNFSPlugin (1.1.0) [Oracle Generic Network File System]
Access Host = 1.2.3.4
Admin Server 1 = 44:45:4c:4c:46:00:10:31:80:51:c6:c0:4f:35:48:31 [dev1]
Refresh Server 1 = 44:45:4c:4c:46:00:10:31:80:51:c6:c0:4f:35:48:31 [dev1]
Refresh Server 2 = 44:45:4c:4c:47:00:10:31:80:51:b8:c0:4f:35:48:31 [dev2]
Refresh Server 3 = 44:45:4c:4c:33:00:10:34:80:38:c4:c0:4f:53:4b:31 [dev3]
UniformExports = Yes
Id = 0004fb0000090000fb2cf8ac1968505e [share]
Name = share
Description = NFS exported /dev/sda1 (427GB) on dev1
Locked = false
== version details ==
OVM server:3.3.1-1065
Agent Version:3.3.1-276.el6.7Kernel Release:3.8.13-26.4.2.el6uek.x86_64
Oracle VM Manager
Version: 3.3.1.1065
Build: 20140619_1065

Actually, OVM, as is with all virtualization servers, is usually only the head on a comprehensive infrastructure. OVM seems quite easy from the start, but I'd suggest, that you at least skim trough the admin manual, to get some understanding of the conecpts behind it. OVS thus usually only provides the CPU horse power, but not the storage, unless you only want to setup a single-server setup. If you plan on having a real multi-server setup, then you will need shared storage.
The shared storage for the server pool, as well as the storage repository can be served from the same NFS server without issues. If you want to have a little testbed, then NFS is for you. It lacks some features that OCFS2 benefits from, like thin provisioning, reflinks and sparse files.
If you want to remove the NFS storage, then you'll need to remove any remainders of any OVM object, like storage repositories or server pool filesystems. Unpresent and storage repo and delete it afterwards… Also, I hope that you didn't create the NFS export directly on the root of the drive, since OVM wants to remove any file on the NFS export and on any root of ony volume there's the lost-found folder, which OVM, naturally, can't remove. Getting rid of such a storage repo can be a bit daunting…
Cheers,
budy

File type changing during "Save As" - Help!

Good Morning! I have a set of tif files converted from RAW that I'm resizing for an order for a client and every time I do a "Save As", the file gets changes to an extension of $CB, then Adobe and nothing else will recognize it.
The history;
Converted RAW to Tif in Bridge CS3
Opened in PSCS3 extended - cropped to size - do the Save As, still shows the file as a Tif in file type - reopened the original to make another size and noticed that file I just created is not there. No, I didn't save the file with the same name, thus Save As.
My normal file naming, I just add a designated letter at the end of my file name to indicate the finished size ie.. legion post 576_001D.tif (D = 8 x 10) The original file would be legion post 576_013.tif. I did this on 3 different computers, using PS 7.01, CS2, CS3 and CS4, all the same results.
Also, I can view the original tif in Windows Picture and Fax Viewer - as I normally am able to, however, this new one comes up with the error and unrecognizable file.
Now I'm wondering did the RAW conversion did something.
Help, I need to get these off to my printing service!
thanks,
Jan

Never mind! Found the problem!
For some reason, there was a check on the “Hide Extensions for Known file Types”.
I had to Go to Tools – Folder Options – View and uncheck “Hide Extensions for Known file Types”. Would have never guessed that one!
You know one of those places your always changing things in!!!!! NOT!
Anyway, it works!

Tolling / Sub-Contracting Material Quantity Change During Order Creation

I have created a requisition for 80,000 KG of a tolling material. When converting the requisition into a purchase order, one of the components of the material goes from 45,881.875 KG to 45,881.874 KG, resulting in an overall amount of 79,999.999 KG and a mismatch between my requisition and purchase order.
I have checked the rounding profiles in the MRP 1 view for all the materials, and each is set to 1.000 KG. Why is this material component rounding down?
Thanks.

so the reduced order quantity is not caused by an component that goes down. it is actually the other way around.
SAP converts the Kg from the requisition into LB in the PO.
And rounds the decimals.
Using this as basis then for the components.
The leading unit is now the order unit, which is LB. whenever you look at a oder quantity in KG, then SAP converts the LB quantity back into KG, which causes again a rounding issue.
That is one of the problems when the base unit is not the smallest unit.

Dest.storag bin change during putaway foreground in LT04

HI
For creating TO from TR , we run LB10, and select "TO in foreground", open (LT04), when we create TO (LT04 ) - on first item, we select "Putaway foreground" (icon >lifter with plus sign), shows Palletization screen, here system automatically purposes,
Destination storage type, storage section and storage bin.
also purposes quant, storage unit .
Here (in the same screen) can we change destination storage section(allowed) and bin(allowed) ?
Storage type setting:
Putaway strategy is : I > addition to existing stock
Destination bin change during confirmation = 1 allowed ( i understand , it means we can change distination storage bin during TO confirmation )
Secondly, i know we can enter storage type, section and bin in LT04 main screen, and go to "Palletization".
it purposes remaining elements like Quant, storge unit.
thanks
james

Hi All
question is
CAN we change destination storage section and storage bin on " PUTAWAY FOREGROUND" screen ( that comes on clicking icon Lifter Plus sign) , where system purposes \ recommended based on master data defined for that material .
I know we can change it on LT04 , main screen . and its working. my focus is , "Putaway foreground" screen is more appropriate for changing sections or bin.
i have carefully configured storage types setting, material master , storage indicator , section indicator , Storage unit type, Storage bin type etc.
thanks
James

Dest.storag bin change during putaway foreground

HI
For creating TO from TR , we run LB10, and select "TO in foreground", open (LT04), when we create TO (LT04 ) - on first item, we select "Putaway foreground" (icon >lifter with plus sign), shows Palletization screen, here system automatically purposes,
Destination storage type, storage section and storage bin.
also purposes quant, storage unit .
Here (in the same screen) can we change destination storage section(allowed) and bin(allowed) ?
Storage type setting:
Putaway strategy is : I > addition to existing stock
Destination bin change during confirmation = 1 allowed ( i understand , it means we can change distination storage bin during TO confirmation )
Secondly, i know we can enter storage type, section and bin in LT04 main screen, and go to "Palletization".
it purposes remaining elements like Quant, storge unit.
thanks
James
Edited by: Csaba Szommer on Jan 6, 2012 8:10 AM

Hi All
question is
CAN we change destination storage section and storage bin on " PUTAWAY FOREGROUND" screen ( that comes on clicking icon Lifter Plus sign) , where system purposes \ recommended based on master data defined for that material .
I know we can change it on LT04 , main screen . and its working. my focus is , "Putaway foreground" screen is more appropriate for changing sections or bin.
i have carefully configured storage types setting, material master , storage indicator , section indicator , Storage unit type, Storage bin type etc.
thanks
James

How change Storage bin search logic in WM ?

Hi All,
Standard process to find bin during putaway in WM is as follow :
First find storage type, then storage section and finally storage bin type.
Is it possible to change slightly this logic as follow :
Find storage type first, then with first storage bin type find a bin in storage section sequence, if not found try to found with second storage bin type within storage section sequence and so on.
It's a kind of mix bewtween storage bin type search and storage section search.
Thanks for advice !
Patrice

OK, so you want it to check all storage sections for available bin type "A" and only then loop back around and check for bin type "B" from the first storage section again.
Storage bin type check is relative to the allowed Storage unit types per bin based on my understanding. During put away the system will check the allowed SUT in sequence based on your entries in your storage bin type search so it would loop within first storage section until it sees no available bin type that fits the allowed bin types (sequential) and only check second storage section (again sequential) when none of the allowed bin types are found available, so if I understand the available config options what you want is not possible without customization....check exit MWMTO003 - Customer-defined putaway strategy to create your own strategy

Storage bin not found (enter storage type) L3398

Hi,
We have an very critical issue. We have gone live on 14th , only one day before. Now our system is showing the message
"Storage bin not found (enter storage type) L3398.""
We have defined Open storage type in our system where , mix storage is allowed. There are 10 bins in this storage type. There is not capacity check for these bins. Now system is not searching bin from Open storage and we have stucked with TO creation. System is not allowing us to created any TO.
KIndly do the help
I will be very thankful if reply fast.
Regards,
Manish I

Hi MANISH,
Though there exists many storage bins , the system is not able to find these bins because proper storage unit type is not defined.
System identifies the destination based on the following criteria :
Activate Storage Type Search
Activate Storage Section Search
Activate Storage Bin Type Search
Go through the below customising for better understanding :
SPROLogistics ExecutionWarehouse Management--Strategies
Maintain the Warehouse Management 2 view of Material master with Palletization data .
Thanks,
Swamy H P

Error - No destination storage bin to be found in storage type

Hi all,
this is my flow -
Create STO PO - ME21n
create deliveries via - BAPI_OUTB_DELIVERY_CREATE_STO
create Transfer order(TO) - L_TO_CREATE_DN - for o/b delivery
confirm TO- L_TO_CONFIRM
Using BDC i am doing PGI for VL02n
create Transfer order(TO) - L_TO_CREATE_DN - for i/b delivery
confirm TO- L_TO_CONFIRM
Create GR - 'BAPI_GOODSMVT_CREATE'
Here till PGI my report pgm is working fine. and when cominf to TO create based on i/b delivery i am getting error -
No destination storage bin to be found in storage type 104
I have added 2 lines in the FM at exception part -
error_message = 16
OTHERS = 32.
So my return code for the FM - L_TO_CREATE_DN (_FOR i/b delivery)_is 16
message class : L3
message number : 009
message type : E
No destination storage bin to be found in storage type 104
Can any one tell me how can be this rectified - Is this a config related issue or data problem ?
Pls help me.
Sen

Hi all,
Thanks for your replies.
Manish: Where do I see that the storage bin is created with respect to storage type? I was checking LS03N where I can see that the storage bin is created for storage section and storage bin type. Configuraiton is like below:
Storage Bin search Strategy:
(1) By storage section: Not active
(2) By Stotage Bin type - Active and the storage bin type is assigned to a storage type.
I have one storage bin available (Bulk Storage) for the selected storage Bin type BUT it is not automatically searched by the process. Material master has WM view1 with storage type indicator and there is a config for storage type search which is working good. The only issue is searching storage bin while creating TO during Goods movement, in particular Put away. Also please note that the storage bin is not hardcodes in material master).
This error happens for all the scenarios (unrestricted, blokced or when WM stock is initial or when the materrial is created first time and subject the WM movements).
When I first started this question I thought that the error happens only for Blocked status. Actually it is happening for all the scenatios when the WM stock in initial.
Hope my scenarios are clear. Thanks in advance for your help again.
Best regards
Nagarajan

Storage bin Type Change during TO creation

Similar Messages

Maybe you are looking for