Storage Bin

Hi Guru's
Can we find storage bin while doing delivery, If we have Warehouse Configured in our system
Thanks and Regards
Srinivas Kapuganti

Hi there,
Yes you can see the storage bin. But make sure that you have done the picking with Transfer Order. Unless the Transfer order is confirmed, items are not picked. Only then stirage bin will appear in the delivery.
You can find that in Item Picking.
Regards,
Sivanand

Similar Messages

Report for Material - Storage Location - Storage Bin

All SAP Gurus,
Is there any standard report available in which we can find out the storage bins for list of materials?
(We have not implimented Warehouse MAnagement)
Regards,

HI,
You need to have Warehouse management in place in order to view the storage bins for materials,
MMBE of MM cannot give you the idea of storage bins.
Hope this helps.
Regards,
Prasanna
Award pls if helpful.

Storage bin Capacity utilization is greater than 100%

Hi,
Via LS03N, I can found that some capacity utilization is greater than 100%, this must be incorrect, what's the reason? is there any report to update the capacity utilization for storage bin?
Kindly please advise.
Thanks

For the capacity checks, the remaining capacities or the used weight in the storage bin master data are updated with every putaway or picking. If you change the inspection method in the current operations or you change capacity or weight data of materials or storage unit types, you then need to make a comparison of the data. You can make this comparison with report RLS10200. First read the documentation before you start the report.

Not Printing the source storage bin in the layout

Hi Gurus
As i am printing the layout to pick the goods for delivery, in which iam not getting the source storage bin for some deliveries only. sometimes its picking and some times not, what has been the reason behind it. i have take the help of an Ababper to check the conditions if any for that filed. but i cannot find any.
Please help me,
Thanks in advance,

sorted out by setting the SPAD - Device types
format, just added the zxxx format to this and now it is working

T.code for viewing stock at storage bin

Hi all,
What is the t. code used for viewing the stock at storge bin?I know this is WM question but your help is appreciated.
Regards,
Shailendra

Hi,
Following are the T-Codes:
LS26   Warehouse stocks per material
LI05    Inventory History for Storage Bin
LX02   Stock List
LX03   Bin Status Report
MB52 List fo warehouse stocks on hand
Regards,
Suresh' D.

Cancel (reverse) Return Order, PGR not possible due to storage bin in 904

Hi gurus hope someone can explain in detail with transaction what am I missing since I'm MM guy and dont know very well SD transactions but here's my scenario,
There is a return order with a delivery (1110500002), then PGI (651), this drive me to process a Tansfer Req to move it from 904 to 010 storage type, and then do the billing, up to here the process is going well.
The problem comes when trying to reverse the above described process, I start with reverse the bill sith VF11 and then try to cancel the PGI ( PGR) with VL09 but system says "Storage bin 001 904 1110500002 does not exist (Check your entry)"
This is why I'm trying to fix the issue as MM guy, but I don't know why the error comes, this bins in 904 should be dynamic and create temporaly the bin 1110500002 which is the delivery that was created when the first return order was created.
I dont know if this error is related to MM movement types or to some config at the delivery type, o maybe the process we are following is not the correct for this because in transaction OMLR for IM 651 there is WM 651 but for 652 IM it's WM counter part is the general GI 255 mvt type so
Just to mention what I think that need to happen for the reverse of the return process is to cancel the bill then cancel the delivery and at this point negative stock should come into 904 bin 1110500002 and the creation of a TR to move from 010 to 904 after doing this TO then stock in 904 will be zero.
Please advise on how this process should happen.
Regards.

Hi TQ,
Thanks for your reply, but I didn't understand what you mean with compare material master, compare it with what? And also I am not really sure that this could be the problem because I have this issue only when reversing the return, this means when I do the return the stock actually goes to 904 1110500002 so this means that the material has mantained correctly WM views in the material master.
Can you elaborate more in detail how you solved your error few months ago?
Thanks and regards

Creation of New storage bins for storage type 007 in Production

Hi Gurus,
Coudl you please give me a clairty, storage bins can transport from Qaulity or we have to create seperately from server to server like Qulity and production.
thx
r

Hello,
As correctly mentioned storage bins never transported from one environment to other. You have to create through LS10 or LS01N.
The bin structure can get transposted from one environment to other & then you can open the structure & create bins in numbers.The bin structure can be seen through LS10 & created through same transaction.
Regards,
Prashant

Inspection lot creation on storage bin

Hello all,
I am wanting to learn how to create an inpection lot of stock within a storage bin.
I ask because we have many storage bins in our warehouse location storing the same material.
If I do a MIGO 322 transaction in inspection lot there is no where to specify bin location, it looks at the warehouse as 1 storage location.
In the lower half of the migo screen there is a 'storage bin' section but it is blocked out and I cannot identify which storage bin I am wanting to inspect within that storage location.
I know I can create a transfer through LT01 however this still doesn't appear in QA32 inspection lots.
I want the bin location to stay in the same storage location but be flagged for quality inspection.
Thanks,
Chris
Edited by: gmanwizo on May 7, 2011 5:58 AM

Hi,
It seems you have both MM and WM activated. You have to assign storage locations to warehouse numbers in customizing, definition of organization step. Then when you do a 322, transfer requirements will be created by the system and you can transfer the material to a storage bin by turning the requirement into a transfer order. Assignment of new storage locations to warehouses may be tricky, you better ask for consulting on this matter.

Serial Numbers in A Storage Bin

Dear all,
In warehouse management we have serial numbers attached to each item in the warehouse and these items are batch managed. During goods receipt serial numbers are scanned using RF scanner and a transfer order is created for each item. We have a customer table to store the details like storage location and storage bin etc when they are first scanned in. There is no problem here.
If items are transferred from one storage bin to another using a transfer order, system is picking the serial numbers required for the transfer order posting. When corresposing material document is displayed using MB51, there is a tab for serial numbers that are included in this material document.
Is there any way to get all the serial numbers of the items stored at Storage Bin level?
Thanks and regards
Raj

Hi Christian,
Thanks for the reply.
In the mean time I was talking some more people here regarding this problem. Looks like there is no one obvious place where equipment serial numbers are stored.
Further digging in to SAP I could make out that the serial numbers get distributed to tables SER01 to SER07 based on the activity performed with key in OBJK. I think I will be able to get there.
I appreciate your time and reply.
Regards
Raj

Reg:creation of storage bin

hi,
i have created storage bin already with two or three coordinates, i have some requirement that it is possible to create six coordinate bin. if so then what is the possible standard template for that, and how much we can extend the coordinates.
Regards
Muthuraman.D

Give examples of the two or three co-ordinates and what you want to extend?

More than one Quant in a Storage bin section (Strategy P)

Dear all,
We have a Storage type with Putaway strategy P, the SUT check active but no SU Management active, Mixed storage = X and Addition to stock = X.
For this Storage type, our Storage bin type and SUT we have set up in customizing a Bin sectioning 3 meaning the Storage bin is divided into 3 sections so a maximum of 3 Quants per Storage bin. Note that other Bin sectionings have also been set up.
During testing I found out a Storage bin section can only contain one Quant at a time.
Because of Addition to stock = X we can add more quantities of the same Material/Batch to a Storage bin secion that already contains stock of this particular Material/Batch.
If I try to add a Material/Batch to a Storage bin section that already contains stock of another Material/Batch (so, a different Quant), the system gives me an error:
Bin item X in storage bin Y already occupied
Message no. L3063
Now physically for the mentioned SUT our Storage bin is divided into 3 Storage bin sections/pallet places and on a pallet it should be allowed to put multiple Materials/Batches at a time, that is why we set Mixed storage = X in customizing.
Now we can only put one Quant (so one Material/Batch) in a Storage bin section at a time;
We want to be able to put more Quants into a Storage bin section at a time.
How can we achieve this?
Note we rather donu2019t want to use Storage Unit Management.
Thanks for any clues!
Kind regards,
Bart

Hi Bart,
As a thumb rule you cannot have one quant with multiple Materials. Ofcourse you can keep on adding same material /batch is the same quant i.e. in the same Bin section where you already put the material.
Quick win for your case is Increase the number of quants allowed say 15. In this case you can keep on storing different material / batches on the same pallet but system will keep on generating sections.
At any point of time you can easily track how many quants (Mat + quantity) are stored in that Bin & relevant section.
For strategy P , SUT check must be activated you cannot skip it.
If Business is not ready to work with more number of sections , you can always think of mapping another startegy ..you could do more test with Bulk Storage.
To my knowledge Strategy I i.e. Addition to existing stock with Mixed storage Indicator will work very well here.
You just need to map appropriate Capacity check as startegy I goes with active capacity.
Thanks,
Mahesh

Report to see the value of material at storage bin level

Hi,
The requirement is to see the quantity and value of material stored at storage bin level.
Is there any standard report available to see the same.
thanks

Hi,
Check on it:-
Storage bin should display in MB52
pherasath

Report by Storage Bin

Hello,
I uses the Inventory Module not WM. In the Material Master Record specifically at Plant Data / Storage 1 view, my client used the storage bin field to specify where the material will be storage.
I need to know if exists a report to display the Warehouse by storage bin.
I appreciate any help.
Regards,
Hector

Dear,
As far as I know not possible.
We developed Z report for similar requirement.
This storage bin is only significant if you do not use SAP warehouse management. It appears on goods receipt/issue slips.
Regards,
Syed Hussain.

Report on Stock in storage bin

Dear Guru
My client wants a report where in MF60 they will get the required quantity to be transferred from raw storage location to production location.They want a report in which the stock to be transferred from raw storage location is in which storage bin.
Is there any standard report for this
regards
sam

Hi,
You can also use this report : LS26 to get an overview display per material.
Or you can use LS03n per WM,storage stpe, storage bin to get history.
Thanks
Silas

Storage bin not getting cleared

I need your help on an issue regarding inventory block of a particular storage bin due to a material which is no longer existing in that particular bin and has already been consumed.
The user is able to create a new physical inventory document for all the storage bins but one.The only one which she is unable to clear is storage bin no. xxxxx.This particular bin is blocked and showing as inventory active against the old phy. inv. doc.
Looking into the Inventory tab of the bin display transaction, we would see 3 materials, out of which there is a material x which is no stock in that bin. While the other 2 materials y and z are not in Inventory active status. Hence, the only reason why the bin is still showing as blocked is due to material x
I tried using LS06 to unblock the particular bin xxxxx, but was unsuccessful in doing so.

Hi,
While creating JSP custom tags, we start from scratch by first creating tag handler class then .tld file for that and finally deploying both these files.
I am looking for a similar approach for making our own JSF component.
I don't want to put jsf-impl API into lib directory. Is it possible to make a simple component using jstl standard libraries ?
--Sushant

Problem in Source storage bin for returs

Hi,
i did PGR for a returns delivery and when i tried to create TO
for the same system is taking the source bin as 000000000 and not the delivery number. i checked the movement type 651 where my entries are correct ie,.. in source storage type i have given 904 and checked the field " source" .
can any body tell me why the system is taking 00000000 as source storage bin rather than the del no............
waiting for ur quick reply.....
thanks

Hi Csaba / rajasekar
i have those requirement tupes maintained correctly.
and further i have gone through OSS notes, it is very helpful.
here i would like bring one more thing to ur notice that this problem i am facing intermittently and not each and everytime.
System is picking up delivery no sometimes and some times it is not.
Further i'll take this oppurtunity to ask u one more question ie...
in OMLR transaction assignment of WM-IM mov types, i have not maintained 601 mov type entry ie,... the entry IMmov type 601 and WM mov type 601 with all the fields in between....but i wonder how the system is allowing me to create TO for the delivery and reverse the same...and even i can find WM mov type 601 in delivery at the time of creating this TO......pls try to anser me how the system is automatically picking this WM mov type and allowing me to create TO........
waiting for ur response

Storage Bin

Similar Messages

Maybe you are looking for