Storage Card still appears after removing from the Slot?

Dear Developers,
As, I am facing a new issue with AM335x. I am inserting SD card in slot 0 and trying to boot the device. It boots properly and through telnet I can see the SD Card as a storage Card. But When I remove the SD Card from the slot, still it appears in the telnet
window.
Any specific reason for that handler is not removing the card ???

Annette: Resting the computer on your lap actually makes it run hotter, because your lap is a pretty good insulator and slows the dissipation of heat through the PB's bottom panel. The same is true of any other soft surface. The PB needs airspace underneath it — that's why it has those little silicone-rubber feet. If you want to use it on your lap, set it on a flat, stiff board so the feet can create that airspace. Or buy a laptop cooling pad, with or without a fan built in.
Other facts to note:
A Powerbook runs hotter while its battery is being charged, cooler when it's running on battery power or the battery is already fully charged and AC power is still connected.
It also runs hotter when Classic mode is in use.
Many Dashboard widgets are enormous consumers of processor cycles and generate a great deal of heat. Turn off widgets you're not using.
Spotlight indexing is also a big energy consumer and heat generator.

Similar Messages

Why is MS-6167 removed from the archives?

Why is the motherboard MS-6167 removed from the slot-a archives? It was there yesterday.

some sort of bug - inexplicable - causing problems with iPad calendars.
You will see many threads regarding March 2013 issues.
this is one of them:
https://discussions.apple.com/message/20524762#20524762

Hi..i use to able able to delete the apps inside my pc and when I sync to 2 of my iPads, the apps are gone in the iPad. Now after deleting from the pc, the apps still appear in both the iPads. Please assist. Thanks

hi..i use to able able to delete the apps inside my pc and when I sync to 2 of my iPads, the apps are gone in the iPad. Now after deleting from the pc, the apps still appear in both the iPads. Please assist. Thanks

Here you are "the strange draft logos"...

List used to add permissions to InfoPath form updated, but people removed from the list still getting permissions.

I have a list that gives users Contribute permission to an InfoPath form during a workflow action. This list has changed, and I have added and removed users from it. The people who I've added are getting permissions, but the people I removed are STILL getting
permissions, even though they are nowhere on the list. What could be happening? I would greatly appreciate any help!
Thank you,
-Lyssa Prince

I must not be explaining this very well, and I apologize for that.
These are time sheets we're working with, so each user needs a certain set of people to approve and review his/her time sheets. The workflow we have running on each time sheet created reads which department the user is in, matches them with the row that
contains the field "department" that matches their department, and gives permission to all of the users in the remaining fields TS Approvers and TS Reviewers. If I update these fields at all, the new users in these fields get permissions for that department's
time sheets, but the people I removed from these fields do not stop getting permissions. It's as if there is a cached copy of the list which is being used by the workflow to assign permissions. This list will fluctuate, so it is not a viable solution to keep
running powershell scripts to remove people from each of these items after they have been removed from the list.

Security policy from old GPO still applying after removal

We have a Server 2k3 domain with a mix of 2k8R2 (PDC) and 2k3 DCs. We are currently in the process of
replacing older 2k3 DC policies with newer policies. Policy A (AKA "Old policy") has always been a problem as it contains settings which cause errors in the event logs of the DCs it is applied to (ID 1020 "Windows cannot create
registry key CurrentControlSet\Control\Session Manager. (The parameter is incorrect)" and 1096 "Windows cannot access the registry policy file, \\domain.com\sysvol\domain.com\Policies\{GUID}\Machine\registry.pol. (The parameter is incorrect)").
Policy B (AKA "New policy") has been wonderful in a completely different AD Forest/Domain that we created it in but is not happy after we copied it to this Domain.
The new policy was exported as a Backup and imported by creating a new GPO on this domain and choosing "Import settings". We've previously encountered both the "hidden file" and "read only" issues with copying GPOs so we avoided
those by ensuring hidden files were copied and removing "read only" from the policy folder. The new policy was then applied to the Domain Controller OU with a higher precedence than the old policy. Neither policy is set to enforced
and the links for both were enabled, both policies are set with GPO Status "Enabled" so the new policy should have overridden the older policy settings. After several gpupdate /force and reboots, the 2k3
domain controllers are showing in RSOP a Red x on "Computer policy" with "Group policy Infrastructure" as failed with details "Group Policy Infrastructure processed successfully but failed to log resultant set of policy information".
Under general with "Display all GPOs and filtering status" Old policy is lower than new policy.
When drilling down to "User Rights Assignment" you can see that "Old Policy" is still the winning policy for all settings. When under "Administrative Templates" "New policy" is the winning policy there. So it
seems that the new policy is applying for admin template settings but not for security policies.
I then disabled the old policy which reflected under the general tab filtering status "Disabled" but the user rights assignment still showed Old policy as winning. I tried modifying the Old policy and saw that the serial number for the policy updated
in the RSOP general tab. Then I completely removed the link for the policy from the DC OU and the policy disappeared from the general tab but still showed under User Rights Assignment.
I've tried clearing the Cached group policy from the machine with:
secedit /configure /cfg %windir%\repair\secsetup.inf /db secsetup.sdb /verbose
and deleting [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft] from registry and c:\windows\system32\GroupPolicy from HD.
Usually I'll get an error from RSOP about RSOP already running until I gpupdate /force and then I'm back at square one.
I've confirmed that the issue is not replication, the machine shows no errors in FRS and I've performed non-authoritative SYSVOL restore on this server. repadmin
shows no errors.
I have not yet tried to demote/repromote the server as I'm unconvinced that will have any effect. I've seen this kind of issue on 2k3 servers where even after removing the server from the domain entirely the policies from the domain still remain in effect
to where you cannot even modify a setting from local gpedit.msc.
It seems that something is causing security policies to stick from the old policy but is allowing admin template policies to apply from the new policy. Where would these old settings be cached from, and how can I get them to go away?

I've now also tried putting the machine in an OU with inheritance blocking an no policies applied.
I've tried deleting [HKLM\Software\Microsoft\Windows\CurrentVersion\GroupPolicy\History] and reboot.
I've turned on all the logging (http://technet.microsoft.com/en-us/library/cc775423%28v=ws.10%29.aspx) and I can even see the .inf files created in c:\windows\security\templates\policy
for each GPO and the policy shows the correct settings.
NTRights (http://ss64.com/nt/ntrights.html,
http://support.microsoft.com/kb/315276) allows me to set the setting manually and AccessChk shows me the current settings
http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx but I still cannot get RSOP to come back clean. I can also see in c:\windows\security\logs that some of the security settings
I'm working show up; "remove SeDebugPrivilege." for example shows up as having been removed from the local administrator which was one of the changes I made.
I've opened up a ticket with Microsoft Support but they haven't had any fresh ideas either. My best guess at this point is that policy is actually applying but RSOP is busted. I have no idea how to reset the RSOP data however.
At this point I'm trying to run WMIDiag to see if there's an issue with WMI as several of the misc errors in the gpedit.log file come up with WMI related issues in google ("InitializeRSOP failed with 0x80070102", "GetObject for event source
of RSOP_ExtensionEventSource.id="{GUID}" failed with 0x80041002").
I should clarify that AccessChk seems to indicate that the User Rights Assignment settings ARE applying but are not showing correctly in RSOP.

Hi, My photo stream used to work fine. But after removing all the photos to separate folders in my computer, my new photos are no longer streaming to my PC. They appear in the photo stream on my other devices - iPhone5 and iPad Mini. It's just my PC

Hi,
My photo stream used to work fine. But after removing all the photos to separate folders in my computer, my new photos are no longer streaming to my PC. They appear in the photo stream on my other devices - iPhone5 and iPad Mini. It's just my PC that's missing the photos.
When I open the iCloud control panel, I cannot turn on the photos. That option is ghosted. I'm running on Windows 7 with iCloud 3.0. Any ideas on how I can fix this? All help is appreciated! Thanks!

Hi Kevinmvb,
Welcome to the Support Communities!
The article below may be able to help you with this. It sounds like you may have moved your photos out of the Uploads folder where they need to reside.
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/TS3989
Cheers,
- Judy

How InDesign comes to know about any changes on document, but not saved. As it shows * on the name of document when it is opened and any changes. And after saving * symbol is get removed from the name of document. How and where indesign@ handles this?

How InDesign comes to know about any changes on document, but not saved. As it shows * on the name of document when it is opened and any changes.
And after saving * symbol is get removed from the name of document. How and where indesign@ handles this?

Are you just asking because you want to know, or do you have a problem you need to solve? I don't know how to write a program, but I think what your are describing is not an unusual thing for a program to do. The * tells you that changes have been made since the last save, and the program reserves a portion of memory for undo functions. I suppose a coder could tell you how it works, but I don't think it would help an average user to know, but that's just my opinion.

Podcast removed from the itunes store after 4 years

Hi
At the moment I think apple really suck big time. After building up a successful presence in the itunes store with my podcast I feel all my hard work has been in vain. Today I received an email saying that my podcast has been removed from the itunes store. This was obviously an automated email and just makes me angry that it has just been removed. My podcast has been in the top 200 music charts over the last few months so I was really pleased. I try to release an episode every month so it has always been regularly updated. I have also ran my feed through feedvalidator.org and this says that the feed is valid. Can someone please shed any light on this as I am really p****d off right now.
My feed is http://djsharky.podbean.com/feed
Any help would be great.
Also I know I had a number of reviews etc so have I lost everything that I have built up now?
Regards
Richard

Also this was the email I got:
Dear Podcast Owner
The following podcast has not been included in the iTunes podcast directory.
Name: DJ Sharky: The Trance & Electro Podcast
Feed URL: http://djsharky.podbean.com/feed/
Submissions may not be included in the directory for a variety of reasons. For more information, please see the podcast technical specification at http://www.apple.com/itunes/podcasts/techspecs.html.
Sincerely,
The iTunes Store Team

HT201320 When using an iPad Air, is it possible to have my email removed from the server after downloading it? That's what I have been doing on my PowerBook and I would like to use my iPad as my primary email reader now.

When using an iPad Air, is it possible to have my email removed from the server after downloading it? That's what I have been doing on my PowerBook and I would like to use my iPad as my primary email reader now.

OK, I found the answer in the mail settings under the advanced button.

Delete Constraint is displayed but record is still removed from the VO

Scenario (ADF UIX Struts):
I select a record in my table and then the delete button. In the Entity Object's doDML method I catch the database foreign key constraint violation and throw a new JboException with a user friendly message to display on my page. The selected record is not deleted from the database which is correct but the record is removed from the ViewObject. Is there anything I can do to retain the record in the ViewObject?
Thanks in advance.

Sir Churchill, I tried deleting one of the playlists from my computer (Playlist 130). The next day I checked my wife's computer and noticed that Playlist 130 was now missing from her computer as well. Is there a way that I can delete a playlist from my computer without it disappearing from hers as well?

Items removed from the Stores

SCENARIO:
- I buy a movie on my AppleTv. After watching it I don't archive a copy of the movie on any of my devices.
- After some time that movie is removed from the iTunesStore.
What happens next? Will I be still able to download the purchased movies also if it's removed from the iTunesStore?
[PS- the question is also about Books, Apps and matched Music on iTunes Match]
Thanks

iTunes: Frequently asked questions about viewing and syncing videos
http://support.apple.com/kb/HT2729
Can I burn iTunes Store Videos to DVD?
You can save your iTunes Store movies to data DVDs for backup purposes (if you have a supported DVD burner), but these DVDs will not play in a DVD player.
You cannot convert iTunes Store videos to another format to author to DVD.

Podcast removed from the iTunes directory as a result of technical problem

I received an email from iTunes informing me that my feed:
http://www.mevio.com/feeds/d4emixtape.xml
Had been removed from the iTunes directory because the feed had some sort of technical issue. I've checked the feed a couple of ways including using Feed Validator and all seems to be working ok.
I tried to resubmit the feed, but I get an 'It appears the feed had already been submitted' error.
There is a duplicate feed that was being used from a different server (Odeo), but I stopped using that about four years ago. I have requested that feed to be removed.
I've contacted Apple Support to get the current feed back on iTunes, but that hasn't been any help.
Any advice on what I can do to get the my podcast feed back in iTunes?

Your feed appears to be technically OK. When the iTunes removes a podcast it usually says 'technical reasons', whatever the actual reason may be. One possible reason for removal is suspected copyright violations, and it's possible (I'm not saying this actually is the case) that they are concerned that your 'mixes' contain copyright material for which you don't have either the written permission of the copyright owner or a podcast licence from a recognized authority. As I say, I just mention that as a possibility to consider.
As to resubmitting: the title of your feed is 'D4E Hip Hop Mixtape' and there is already a podcast of that name showing in the Store (though it's looking for the feed which you have removed). Even if that one gets removed, you are still likely to get the same error - there appears to be a minor bug in the Store software which claims that a podcasts has already been submitted even if either the podcast hasn't been accepted previously or if one of the same name has been removed.
To get round this you need to make a small change in the title - a single character would probably do - and resubmit. You can always change the title back once it's been accepted.
As to removing the old podcast, did you follow the procedure outlined here?

What could cause a server to be removed from the farm other than running PSConfig and removing it?

Hi,
We had a strange issue today. One of our two production WFE servers in our SP2010 farm had become disconnected from the farm. I noticed it because I had created a new site collection within an existing web site last week but it was only available on
one WFE. I didn't think for one second that the server had already been removed from the farm but I had decided I would remove it and re-add it to see if that would fix the issue. When I ran PSConfig to remove it I found the following:
I checked the log:
Entering function WelcomeForm.TryToLoadTheFarm
Found a task by the name of initialize in the task collection
Entering function Farm.Farm
Leaving function Farm.Farm
Entering function Farm.TryIsJoinedToFarm
Entering function get CommandCollection.this[string key]
Entering function CommandCollectionBase.Get
Found value in collection for key initialize
Leaving function CommandCollectionBase.Get
Found command initialize in collection
Leaving function get CommandCollection.this[string key]
Entering function Command.this[string key]
Entering function CommandCollectionBase.Get
Found value in collection for key B2B_UPGRADE
Leaving function CommandCollectionBase.Get
Found parameter B2B_UPGRADE in collection
Leaving function Command.this[string key]
Clearing cached Farm objects to reload
Entering function Farm.Clear
Entering function CentralAdminServiceInstance.Reset
Leaving function CentralAdminServiceInstance.Reset
Leaving function Farm.Clear
My cached Farm object is null, so will load it
Calling SPFarm.Local and SPServer.Local to get the local farm objects
SPFarm.Local returned a local farm
SPFarm.Local retuned a farm, but SPServer.Local returned null. Failed to connect to the farm, except in B2B Upgrade.
Entering function Farm.Clear
Entering function CentralAdminServiceInstance.Reset
Leaving function CentralAdminServiceInstance.Reset
Leaving function Farm.Clear
Leaving function Farm.TryIsJoinedToFarm
Failed to successfully try to see if this server is joined to the server farm.
The operation will continue so that you can force a disconnect from a server farm that cannot be contacted
Resource id to be retrieved is FarmIsJoinedFailureWhileUsingUICanOnlyDisconnect for language English (United States)
Resource retrieved id FarmIsJoinedFailureWhileUsingUICanOnlyDisconnect is Failed to detect if this server is joined to a server farm.
Possible reasons for this failure could be that you no longer have the appropriate permissions to the server farm, the database server hosting the server farm is unresponsive,
the configuration database is inaccessible or this server has been removed from the server farm.
To diagnose this problem further, review the extended error information located at {0}.
If this problem persists, choose to disconnect from the server farm. After disconnecting, run the wizard again to create or connect to an existing server farm.
Anyone know what this line means?
SPFarm.Local retuned a farm, but SPServer.Local returned null. Failed to connect to the farm, except in B2B Upgrade.
Permissions were unchanged from before and I was running PSConfig elevated with the SharePoint admin account. So with this information along with the fact that the new site collection was not available on this server I concluded that it had been removed
somehow.
Has anyone seen this happen before? As it is a production server I'm going to have to explain this to the customer.
Thanks!

Hi Fridge,
In Sharepoint central admin,Manage servers in Farm,Does this show this WFE Server still?
Check if any ports(32843,32844) has been closed on the WFE server which got disconnected as these ports are used to communicate between WFE servers
Check if this is helpful
http://blogs.msdn.com/b/uksharepoint/archive/2013/01/21/sharepoint-2013-ports-proxies-and-protocols-an-overview-of-farm-communications.aspx

Back button not removing from the stack?

Hi,
I have the following code:
[[self navigationController]pushViewController:_newsDetailController animated:YES];
However, It doesn't seem to be removing from the stack when the user hits the back button on the UINavigationBar.
The reason I believe this, is because when you then select another item in my UITableView, it loads exactly the same details as the first time.
I have tried [_newsDetailController release]; but it still doesn't make any difference. It just crashes after the third selection.
This is what I'm doing in my didSelectRowAtIndexPath:
- (void)tableViewUITableView *)tableView didSelectRowAtIndexPathNSIndexPath *)indexPath {
[[self appDelegate] setCurrentlySelectedBlogItem:[[[self rssParser]rssItems]objectAtIndex:indexPath.row]];
[self.appDelegate loadNewsDetails];
Any help would be greatly appreciated. I've spent ages on this!
It worked fine until I added a UINavigationController.
Thanks,
Nick

Hi Nick, and welcome to the Dev Forum,
nrawlins wrote:
... It doesn't seem to be removing from the stack when the user hits the back button on the UINavigationBar.
I understand how your observations could make it seem like your _newsDetailController is somehow staying on the stack, but that's not what's going on here. If you want to see the stack, just add some logging before and after pushing or popping:
NSLog(@"stack: %@", self.navigationController.viewControllers);
I think we'll need to see more of your code to isolate the problem, but what we're looking for is a logic mistake which causes the detail controller to always display the info for the same item, regardless of which item is selected next. Here's a list of questions to guide your search, and/or show you which code we need to look at:
1) What's in the array returned by [[self rssParser]rssItems] ? It might help to add some logging in tableView:didSelectRowAtIndexPath like this:
- (void)tableView(UITableView *)tableView didSelectRowAtIndexPath(NSIndexPath *)indexPath {
NSArray *item = [[[self rssParser]rssItems]objectAtIndex:indexPath.row]];
NSLog(@"%s: item=%@", _func_, item);
[[self appDelegate] setCurrentlySelectedBlogItem:item];
[[self appDelegate] loadNewsDetails];
2) What does loadNewsDetails do? It looks like it finds the details for the item stored in currentlySelectedBlogItem. Is that right? Some logging in loadNewsDetails might help to make sure the correct details are loaded there. From your description it sounds like you already had this part of the code working right, but it wouldn't hurt to be sure it's still doing what you expect;
3) How does the data obtained in loadNewsDetails find its way to the details controller? This is the missing link not shown in the code you've posted so far. I think we need to look at:
3.1) Where and when the details controller is created;
3.2) Whether the same controller object is intended to persist from item to item, or whether a new instance of the controller is created each time an item is selected. The latter scheme is usually preferred for best memory management;
3.3) Is the current item and detail data stored in the detailsController or the app delegate? When is it stored, and when is it used?
For example, suppose the details controller is only created once and persists for the life of the table view. Then suppose loadNewDetails saves the new details in an ivar of the app delegate, and the code to fetch the new details is in viewDidLoad of the controller.
In the above scenario, viewDidLoad would run after the details controller was created, and if the details of the first selection were loaded by then, the details for the currently selected item would
be presented as expected. But viewDidLoad will normally only run once, so when the selection was changed, the new details would never be fetched, and the previous details will be displayed again.
The best way to avoid this and other related scenarios, is to create a new details controller each time a new selection is made from the table view:
// MyTableViewController.m
#import "myAppDelegate.h"
#import "NewsDetailController.h"
// called by loadNewsDetails as soon as details have been loaded
- (void)presentDetailController {
NewsDetailController *viewController = [[NewsDetailController alloc] // vc retainCount is 1
initWithNibName:@"NewsDetailController" bundle:nil];
// store new details in the detail controller; e.g.:
viewController.navigationItem.title = [self appDelegate].currentlySelectedBlogItem;
viewController.textView = [self appDelegate].currentDetails;
[self.navigationController pushViewController:viewController // vc retainCount is 2
animated:YES];
[release viewController]; // vc retainCount is 1
By releasing the new controller in the last line, we reduce its retain count to 1. Now the new controller is only retained by the stack, so when the stack is popped, the new controller will be dealloced.
If none of the above is helpful, please answer all the questions as best you can and post the indicated code, ok?
- Ray

If someone is removed from the contact list...

If someone is removed from the contact list, but the other person has them on block. Can they view the previous messages? Can they still send messages even after being removed?

To stop future emails, click 'My Stuff' at top right, select 'Preferences' , then in the next page select the 'Email Notification Preferences' tab and click all the 'No' radio buttons. Then click 'Save'.
If you already have notifications set on some threads you will still get emails from them. Click on your username at the top, then under 'Actions' in the right sidebar, select "'Manage email notifications.' This will show the threads you've set up notifications on in the past. Select those you want to stop and click the 'Remove Selected Notifications' button at bottom.

Storage Card still appears after removing from the Slot?

Similar Messages

Maybe you are looking for