Storage data in Oracle 8i
I believe that someone remember what kind of data storage had Oracle 8i? I know that this Oracle version could storage data on file systems and raw devices. But it's possible to use OCFS2 or ASM?
Those are simple facts of life which apply to many older Oracle versions, so yes: before 9i there was cooked (ufs, jfs, vxfs, or whatever) or raw only.
Sybrand Bakker
Senior Oracle DBA
Similar Messages
-
SQL Server 2008 Express R2 exceeds the storage capacity of Oracle XE
Hello, here is a novelty: SQL Server 2008 Express R2 exceeds the storage capacity of Oracle XE, XE you still limited to 4GB of data from, the competition gets better and offers a bit more, XE remains the same, hopefully Oracle 11g XE exceeds storage and memory to SQL Server.
[http://www.microsoft.com/express/Database/]
Roberto.
Edited by: rober584812 on Apr 27, 2010 5:09 PM
Edited by: rober584812 on Apr 27, 2010 5:09 PMYes, I do good work is correct, I have not thought to migrate from Oracle XE to SQL Server Express because it could not work with the flexibility of PL / SQL and other Oracle features own, however, SQL Server 2008 R2 Express if takes the lead XE in storage, at which Oracle Corp. will match or exceed, offer more storage in response to competition and not only compensate for the limitation of 4GB with Excellency good features.
Roberto. -
Problems with special characters uploading data into oracle database
Greetings
I have a problem uploading data into oracle tables from sybase datasource. The data that I want to upload is in Spanish, for example when I have a varchar field with the data 'Consultoría', in oracle table the data upload with interrogation symbols.
I have my source and target datastores configured as follows.
Any suggestion? Thank you for your timeChack section 10 Locales and Multi-byte Functionality in the SAP Data Services Reference Guide for an exhaustive description of NLS settings.
As a summary, following settings are required:
locales in the datastore definitions match the actual locale used in the associated databases
the locale of the DS engine allows for source to target translation
the character set in the target database supports storage of accented characters -
How to pull data from oracle GL to planning
Hi all
Can one suggest me how to pull data from oracle GL in to hyperion planning(we are using hyperion planning 9.3 with limited licence for analytic services). i guess we can use HAL ..any thing else
any help is appreciable
regards
M.VHi
I appreciate for your response. Yep you are exactly right it is data only, but I do have a problem these people have their licence of limited version of Essbase.
Let me give you the information of their licence agreement.
The licence for the hyperion planning- sytem9 programs includes a limited use license for both the hyperion Essbase- system 9 and hyperion Financial reporting - system 9 programs. Such limited use license means that the hyperion Essbase- system 9 and Hyperion financial reporting -system 9 programs may only be used to access data from the Hyperion planning -system 9 program.
Specifically, the hyperion essbase- system 9 program cannot be used to create Essbase cubes that do not contain data used by the Hyperion planning- system 9 program and the Aggregate storage option component of the Hyperion Essbase - system 9 program may not be used.
1) what it(licence agreement) really means - can you install Essbase, if not how can you create dimensions dynamically using planning.
2) Is it possible without Essbase as far as I know its not possible
3) are we going to face any issues with this licence.
4) Is it possibe to pull data with planning
I appreciate if any one resolve this issue
regards
M.V -
Unable to show Unicode Data in Oracle RESTful Service JSON
Hi Everyone.
I have stored unicode data in Oracle database and when i retrieve in sql query it is showing the same. But when i retrieve the data in json using oracle RESTful web service (GET), it bringing with unknown character as shown below.
next: {},$ref: "http://000.00.00.00:8085/ords/mobile/sch/loginm/?user=SURESH&pwd=123&page=1"
items: [
uri: {},$ref: "http://000.00.00.00:8085/ords/mobile/sch/loginm/41"
stud_id: 41,
stud_code: "1001",
stud_name: "அப்துல் ஜப்பார்"
My Database Setup as below:
SQL> SELECT name,value$ FROM sys.props$;
NAME VALUE$
DICT.BASE 2
DEFAULT_TEMP_TABLESPACE TEMP
DEFAULT_PERMANENT_TABLESPACE USERS
DEFAULT_EDITION ORA$BASE
Flashback Timestamp TimeZone GMT
TDE_MASTER_KEY_ID
DBTIMEZONE -07:00
DST_UPGRADE_STATE NONE
DST_PRIMARY_TT_VERSION 11
DST_SECONDARY_TT_VERSION 0
DEFAULT_TBS_TYPE SMALLFILE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET AL32UTF8
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_RDBMS_VERSION 11.2.0.1.0
GLOBAL_DB_NAME MOBILE
EXPORT_VIEWS_VERSION
SQL> select DECODE(parameter, 'NLS_CHARACTERSET', 'CHARACTER SET',
2 'NLS_LANGUAGE', 'LANGUAGE',
3 'NLS_TERRITORY', 'TERRITORY') name,
4 value from v$nls_parameters
5 WHERE parameter IN ( 'NLS_CHARACTERSET', 'NLS_LANGUAGE', 'NLS_TERRITORY');
NAME VALUE
LANGUAGE AMERICAN
TERRITORY AMERICA
CHARACTER SET AL32UTF8
8
WORKLOAD_CAPTURE_MODE
WORKLOAD_REPLAY_MODE
Awaiting you solution.
-- Abdul JabbarKumar,
Ftping the PG.xml to mds folder will not help the page to goto MDS directory
You have to import the file using xmlimporter
I understand you have done the import, but it is not success.
Could you please post what is the script you used to import the PG.xml
and once you run what was the output you have got.
May be you can refer the URL for the scripts
http://apps2fusion.com/at/61-kv/331-oa-framework-scripts
With regards,
Kali.
OSSI. -
Loading MS Access Table and Data into Oracle
Hi,
I have few tables in MS Access. I want to create same layout of tables in Oracle and want to populate data from MS Access tables to Oracle tables.
Please let me know if there is a way by which I can create tables and load data automatically (thru some option or script)?
I have Oracle 10g database and its clients.
Thanks in advance,
Rajeev.You can use Oracle migration workbench
Loading MS Access Table and Data into Oracle
It´s very easy to use and good to import
regards,
Felipe -
Get date from Oracle when local time zone is different from Oracle time zon
Hi!
Local machine time zone= +2
Oracle time zone= +1
I set date to Oracle using java.sql.Date.
From application I save date at 00:30 clock and send e.g. 28.06.2002, but in Oracle date is save as 27.06.2002 01:00 (hour=01 , I suppose that is because java.sql.Date hasn't time the Oracle set it time = time zone=+1) And when I get date from Oracle I get incorrect date. In SQL I don't use date masks. Maybe solution is to use java.sql.Timestamp object (when save date to Oracle) instead of java.sql.Date?
But if I save date at e.g. 01:00 clock and send e.g. 28:06.2002 in Oracle, date is save as 28.06.2002 01:00 and when I read from Oracle I get correct date.
Thank you.Hi!
Local machine time zone= +2
Oracle time zone= +1
I set date to Oracle using java.sql.Date.
From application I save date at 00:30 clock and send
e.g. 28.06.2002, but in Oracle date is save as
27.06.2002 01:00 (hour=01 , I suppose that is because
java.sql.Date hasn't time the Oracle set it time =
time zone=+1) Presumably you are using setTimestamp() to store the value. If you are explicitly using a varchar (string) then you will have to correct the timezone your self.
And when I get date from Oracle I get
incorrect date. In SQL I don't use date masks. Maybe
solution is to use java.sql.Timestamp object (when
save date to Oracle) instead of java.sql.Date?The method setDate/getDate store a 'date' which is not the same as a 'date and time' for which setTimestamp/getTimestamp are used.
But if I save date at e.g. 01:00 clock and send e.g.
28:06.2002 in Oracle, date is save as 28.06.2002
01:00 and when I read from Oracle I get correct date.
Thank you. -
Extracting data from Oracle to a flat file
I'm looking for options to extract data a table or view at a time to a text file. Short of writing the SQL to do it, are there any other ideas? I'm dealing with large volumes of data, and would like a bulk copy routine.
Thanks in advance for your help.Is there any script which i can use for pulling data from tables to a flat file and then import that data to other DB'sFlat file is adequate only from VARCHAR2, NUMBER, & DATA datatypes.
Other datatypes present a challenge within text file.
A more robust solution is to use export/import to move data between Oracle DBs. -
how do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full.. HELP!
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space. -
How to extract data from oracle database directly in to bi7.0 (net weaver)
how to extract data from oracle database directly in to bi7.0 (net weaver)? is it something do with EDI? can anybody explain me in detail?
Thanks
YorkYou can use UDConnect to get from Oracle database in to BW
<b>Data Transfer with UD Connect -</b>
http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
<b>Prerequisites</b>
You have installed the SAP WAS J2EE Engine with BI Java components. You can find more information on this in the SAP BW installation guide on the SAP Service Marketplace at service.sap.com/instguides.
Hope it Helps
Chetan
@CP.. -
Exporting Data From Oracle 10g to Access
Hi Experts,
I need to export data from oracle apps shcema(each and every object in it) to MS ACCESS File.
Please let me know how to do it
Thanks and Regards,
AndySince you did not provide details of what you are planning to do, a very simple, however, depending upon the number of your tables, very labour intensive solution:
Although being not very familiar with access, I think access offers a means to import csv files.
So e.g. using SQL*Plus you can execute the following steps.
set pagesize <nnn>
set linesize <nnn>
set colsep ',' -- You may choose other special characters to separate columns of your output
spool <csv-file>
select * from <tab>;
spool offWherever you see <nnn> exchange by appropriate numeric values to get just one page as result and to configure your line size to hold a complete record in one output line.
Replace <csv-file> and <tab> by the name of your output file to be read in to access and by the name of your table, respectively. -
Hi All,
I am trying to insert data into oracle 9i temp tables using the following style. but getting error as
ERROR at line 3
ORA-00933 SQL command not properly ended
Please assist me.
INSERT INTO emp (empname,empno)
SELECT *
FROM XMLTABLE (
'/EMP/CODE'
PASSING xmltype (BFILENAME ('test_dir', 'emp.xml'), NLS_CHARSET_ID ('CHAR_CS'))
COLUMNS empname VARCHAR (30) path 'empname',
empno VARCHAR (30) path 'empno')
MY emp.xml is
<?xml version="1.0" encoding="AR8ISO8859P6"?>
<EMP>
<CODE>
<EMPNAME>YALEXFBARK044</EMPNAME>
<EMPNO>803926354086</EMPNO>
</CODE>
<CODE>
<EMPNAME>YALEXFOLV0044</EMPNAME>
<EMPNO>803926354109</EMPNO>
</CODE>
<CODE>
<EMPNAME>YALEXFREDTT44</EMPNAME>
<EMPNO>803926354093</EMPNO>
</CODE>
<EMP>>
Oracle version: 8i - 9.0.x.x
There was no option that I can recall or could find. All the parsing of XML that I've done in 8i was via the xmldom package.
Oracle version: 9.2.x.x - 10.1.x.x
This is were Oracle introduced extract, extractValue and TABLE(XMLSequence(extract())) for dealing with repeating nodes.
Oracle version: 10.2.x.x
Oracle introduced XMLTable as a replacement for the previous methods since it could handle all three methods for extracting data from XML. At that point, Oracle stopped enhancing extract/extractValue in terms of performance and focused on XMLTable. In 10.2.0.1 and .2, XMLTable was implemented via Java and in .3 it was moved into the kernel so performance from .3 onwards should be better than the older 9.2 / 10.1 methods. If not, feel free to open a ticket with Oracle support. Apparently Oracle also introduced XMLQuery as well but I've never heard of many using that in 10.2
>
from Methods to parse XML per Oracle version
so use correct way for your oracle version -
How to insert more than 32k xml data into oracle clob column
how to insert more than 32k xml data into oracle clob column.
xml data is coming from java front end
if we cannot use clob than what are the different options availableAre you facing any issue with my code?
String lateral size error will come when you try to insert the full xml in string format.
public static boolean writeCLOBData(String tableName, String id, String columnName, String strContents) throws DataAccessException{
boolean isUpdated = true;
Connection connection = null;
try {
connection = ConnectionManager.getConnection ();
//connection.setAutoCommit ( false );
PreparedStatement PREPARE_STATEMENT = null;
String sqlQuery = "UPDATE " + tableName + " SET " + columnName + " = ? WHERE ID =" + id;
PREPARE_STATEMENT = connection.prepareStatement ( sqlQuery );
// converting string to reader stream
Reader reader = new StringReader ( strContents );
PREPARE_STATEMENT.setClob ( 1, reader );
// return false after updating the clob data to DB
isUpdated = PREPARE_STATEMENT.execute ();
PREPARE_STATEMENT.close ();
} catch ( SQLException e ) {
e.printStackTrace ();
finally{
return isUpdated;
Try this JAVA code. -
How to create a Macro in excel to store the excel data to Oracle Database
Hi All
Does anyone has created a macro in excel which on being run stores the excel data to Oracle database. In my project I need to create one such macro for updating oracle database with excel data and another for inserting excel records.
I tried doing this using a macro in MS access but Client wants its to be done using Excel Macro only.
Any help would be highly appreciated.
Thanks in advance..
ShikhaPlease read Chapter 19.7 Creating Selection Lists (http://download.oracle.com/docs/html/B25947_01/web_complex007.htm#CEGFJFED) of the Oracle® Application Development Framework Developer's Guide For Forms/4GL Developers 10g Release 3 (10.1.3.0)
Cheers,
Mick. -
Error while retreiving data from oracle using EJB.
HII All,
I m getting this error while trying to retreive data from oracle DB using EJB.
An error has occurred. Maybe the request is not accepted by the server:
Exception in method empName.
HTTP/1.1 500 Internal Server Error
Connection: close
Server: SAP J2EE Engine/6.40
Content-Type: text/xml; charset=UTF-8
Set-Cookie: <value is hidden>
Date: Mon, 24 Jul 2006 10:50:11 GMT
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" ><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode>SOAP-ENV:Client</faultcode><faultstring>Exception in method empName.</faultstring><detail><ns1:com.sap.engine.services.ejb.exceptions.BaseEJBException xmlns:ns1='http://sap-j2ee-engine/client-runtime-error'>Exception in method empName.</ns1:com.sap.engine.services.ejb.exceptions.BaseEJBException></detail></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope>
Thanks in advance
Devendra Phate.Hi Devendra,
this error message does not tell me much. Pleas either start debugging or watch your logs for more detailed messages.
Regards,
Benny
Maybe you are looking for
-
[SOLVED] CD Drive causing boot problems
I'm trying to install Arch, but booting the install disk causes these errors to come up: Loading /arch/x86_64/vmlinuz..... Loading /arch/x86_64/archiso.img.............ready. Decompressing Linux... Parsing ELF... done. Booting the kernel. : : Startin
-
Second iphone not working as it should
Hi, i posted some days ago about my iphone having white screen of death on my iphone after 3 mins of usage, to make a long story short, i got a new iphone. But this time there's something wrong with the touchpad, it just stops working from time to ti
-
I have a trial version of lightroom 5 and would like once and forall to bring some order to both my hard drives and lightroom 5 collection. Some photos in lightroom 5 seem to have lost their path. some are in Window 7 folders and others are in Elemen
-
I want to reset my iphone to factory setting to give it out and want to wipe my data
I"ve been trying to reset my phone but it keeps rejecting my Apple ID even when I reset it?
-
Creating zone level price change using link codes RMS
Hi, In the RPM module of RMS(Oracle Retail Merchandising System 12), What is the purpose of creating zonel level price change using link codes when it could be done without link codes?. Is there any difference between the two?. Thanks in advance.