Storage Foundation Manager

Hi,
Sorry if this is the wrong forum for this question - if so please advise.
I've installed Storage Foundation Basic on some of my servers, and Storage Foundation Manager on one Solaris box to manage all the storage.
I easily got VEA on the manager to connect to the otehr hosts and do some basic volume management on them, but I cannot seem to get the actual Storage Foundation Manager web gui (on port 8443) to recognise my hosts. The inventory on there is full of 0s, and I can't see any obvious menu items to let me connect to my hosts or "discover them".
Has anyone used Storage Foundation Manager in a Solaris environment? Any advice welcome.
Cheers,
GXW

After installiing the SFM packages on the central server, you have to go to each of the managed hosts and migrate the managed host to report to the central server.
try these steps
-login to the manage host
- cd /opt/VRTSmh/bin
-./migrate central_mode -d <central server FQHN> -p <you agent password>
SFM 2.0 is releasing in a couple of days and there is no need to do anything on the managed host to get this reporting except installing the managed host package. You just install the CS packages on the central server and the managerd host package on the MH and you can add the MH to the CS using the webgui.

Similar Messages

Migrating Oracle from Solaris to Linux: Trouble converting FileSystem metadata with fscdsconv in Linux (Veritas Storage Foundation)

Hello everyone,
I'm in the process of migrating an Oracle DataBase from Solaris 5.10 server to Linux Red Hat 6.4, the storage used is SAN and volumes managed by Veritas Storage Foundation on Solaris
At this point, I'm trying to convert the byte order of some volumes that come from Solaris in my Linux server using the following command:
/opt/VRTS/bin/fscdsconv -y -e -f /tmp/vxConv/dbtemp01.tmp -t os_name=Linux,arch=x86 /dev/vx/rdsk/dgtemp/dbtemp01
Note: Because of the text formating, the above command could span several lines, but I'm executing it in just one
And I get the following errors:
UX:vxfs fscdsconv: ERROR: V-3-20012: not a valid vxfs file system
UX:vxfs fscdsconv: ERROR: V-3-24426: fscdsconv: Failed to migrate
Searching for a solution of these errors in the Veritas forums, I've found this post, where the user mikebounds gives some steps to migrate Solaris to Linux. I've found that I've replicated these steps but I get stuck on the fscdsconv because the beforementioned errors.
Does anyone know what could be happening here or have any sugestion to share?
Software Versions involved:
RHEL 6.4 x86_64
Veritas Storage Foundation Enterprise 6.2.0.100 on Linux
Solaris 5.10
Veritas 5.0 on Solaris
Disk layout v7
vxfs filesystem format
Oracle 10g
Thank you very much in advance for any help/ideas to solve this
Best regards
Raul

have you seen this - How to migrate a data store from Solaris to Linux? (Doc ID 1302794.1)
HTH,
Pradeep

Website Storage Settings Manager

I can't access my Website storage settings manager. I am thinking one of my kids messed this up somehow.... My old FB games are just not opening at all, but new ones will work. I can't access the Local storage because the game won't load at all, so there is no image to click on. When I go to the Website storage settings manager, it says I need flash to view the magager - ooooookaaaay. when i click on install (which I know I don't need cause I have a Chromebook) it says I don't need it cause I have a chromebook. Ooooookaayyyy. ??????

I came here looking for an answer to that same question. I'm running Windows XP HE, 32-bit, using google chrome browser. Would love to see someone help with this.

Information about Sun Cluster 3.1 5Q4 and Storage Foundation 4.1

Hi,
I have 2 Sunfire V440 with Solaris 9 last release 9/05 with last cluster patchs.. , Qlogic HBA fibre card on a seven disks shared on a Emc Clariion cx500. I have installed and configured Sun cluster 3.1 and Veritas Storage Foundation 4.1 MP1. My problems is when i run format wcommand on each node, I see the disks in a different order and veritas SF (4.1) is also picking up the disks in a different order.
1. Storage Foundation 4.1 is compatible with Sun cluster 3.1 2005Q4?????
2. Do you have a how to or other procedure for Storage foundation 4.1 with Sun Cluster 3.1.
I'm very confuse with veritas Storage foundation
Thanks!
J-F Aubin

This combination does not work today, but it will be available later.
Since Sun and Veritas are two separate companies, it takes more
time than expected to synchronize releases. Products supported by
Sun for Sun Cluster installation undergo extensive testing, which also
takes time.
-- richard

Storage Unit Management at WS level and/or Storage Type level??

Hi all,
There are two ways to activate the storage unit management in WM (i.e. Warehouse No, and Storage Type).
Does it means if I want only certain storage type to have the function of SU management, I should NOT activate it on the Warehouse number, and If I want ALL my storage type to have the function of SU management, then I should activate it at warehouse no, and I DO NOT need to activate the storage type level anymore??
Am i correct?
If not please explan to me as it is quite confuse.
Thanks
Tuff

To enable SUM, you must activate it on warehouse number level first. Then SUM can be activated for relevant individual storage type. Interim storage type can not be activated for SUM though.

Storage Unit Management

Hi All,
My client has a requirement to use Storage Unit management in a very similar way to HUM. We know that there will be a large amount of custom development to make things work but i have one question.
In HUM you can create multi level structures.
Is this possible in SUM? I assume not and I am aware that un SUM you only see the top level unit. My clients business does require multi level units.
Thanks
Stuart

Hi,
If your client wants to have SUM with multi level SUs you should consider the use of HUM instead of developments.
As for multi level SUS: in my opinion you are right, you cannot have SU "structure" whilst in case of HUM you can use nested HUs. Always the outer HU corresponds to the SU.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/2d/584bc5a70f11d2b44e006094b9b9dd/frameset.htm
The storage unit recognizes the sum of the materials and their related quantities. Handling units recognize packing hierarchies (resulting from nesting) and the serial numbers relating to them. If the stock is changed, it follows that both the storage unit and the handling unit are changed as well.
Regards,
Csaba

Simple Storage unit management by using of 'real' handling unit data

Hi all,
actually we have a WM setup to use the full handling unit management in Warehouse. After some years we detected that the HU managed
Warehouse is not the best solution for our business.
Inside of WM we do no more want to have the Handling units. The assigned storage location is not HU managed.
Now to my question:
We receive from other plants finished goods via inbound delivery. All goods are packed on Handling Units.
When doing the good receipt, Is it possible to use the HU data (vekp, vepo) and create according to it the WM storage units? So one Handling unit
from the inbound delivery will become one storage unit.
thanks in advance for your answers.
Michael

Hi Patrick,
we actually have SAP WM with HU management running. but we want to go back to WM without HU management - only with the storage unit management.
when getting an inbound delivery from another plant (in the same client) goods are batch managed and packed on HU´s. i am searching for a possibility to use the HU data from the inbound delivery to create the WM storage units. So one HU should become one WM storage unit.
so i will post to an ERP comuity.
thanks
Michael

Unbreakable oracle linux- cannot install veritas storage foundation

can install storage foundation 5.1 on redhat 5.5 same box and it works fine. When upgraded to unbreakable kernel, veritas becomes broken.
if install kernel first, then try storage foundation install, gets this error:
This release of VxVM is for Red Hat Enterprise Linux 5.
Please install the appropriate OS
and then restart this installation of VxVM.
error: %pre(VRTSvxvm-5.1.100.000-SP1_RHEL5.x86_64) scriptlet failed, exit status 1
error: install: %pre scriptlet failed (2), skipping VRTSvxvm-5.1.100.000-SP1_RHEL5
I have looked and have found nothing that says it shouldn't work. Any ideas?

Not yet BUT have found this doc:
http://www.symantec.com/business/support/index?page=content&id=TECH50963&key=56211&actp=LIST
It appears that it is supported if you can reproduce the issue. Thing is the issue is the installation of the storage foundation packages. That works fine under standard linux kernel.
My question to you is if you have seen storage foundation work with the unbreakable kernel.

Question about Adding External Storage/File Management

I am using LR5.2 on mid-2011 MBA. Before long I will run out of space on the HD. I have one catalog of about 16K photos. I would like to purchase external hard drive for additional storage. I use Time Machine for backup. What is the best way to manage the additional storage and keep the catalog intact?
1) I currently have photos organized by date? i.e., Pictures/2013/2013-10-10/ etc. Should I keep this file organization as it is and then when importing new photos, select 'copy' from SD card and select 'Location' as new external drive?
OR
2) Should I move all photos to new backup drive to keep all files stored together? Would this be better for long term file management?
Any recommendations for best practices? Or is there a better to organize photos for current and future use?
Also, does the catalog stay in the same location under either 1) or 2)
Thanks in advance

I would suggest creating a root folder on the EHD. You will need to keep your EHD connected when working with Lightroom. It will show up like your Mac HD with the green light in the left hand panel.
Leave everything where it is for the time being but you may want to drag older folders to the EHD over time, as importing new photos, generating previews and using the develop module will usually be faster on the main flash drive of the MBA.
Don’t use Finder to move files/folders around. Always use the Lightroom Library and the database of files and your develop settings (catalog) will not get corrupted.
See this video:
http://www.youtube.com/watch?v=4trWRAeOsuA

Clustered Storage Spaces Management

What is the best way to manage 2 node windows clustered storage spaces. I have two storage Pool and have General Purpose(NFS), ISCSI target Server(ISCSI) and Scale out file server (SMB) roles installed in MS cluster. Storage will be provisioned to
many servers for internal customers as NFS, SMB and ISCSI
1- What is the best to manage virtual disk, volume ? What I create one virtual disk and and one volume for each server ? or create two virtual disk from each storage pool one for mirror and one for parity and expand as needed ?
2- Why I assign drive letter to volume i create. Is there better way to manage this ?
Any best practice document or KB or help will be really appreciated
Thank you,
Adnan
ad

What is the best way to manage 2 node windows clustered storage spaces. I have two storage Pool and have General Purpose(NFS), ISCSI target Server(ISCSI) and Scale out file server (SMB) roles installed in MS cluster. Storage will be provisioned to
many servers for internal customers as NFS, SMB and ISCSI
1- What is the best to manage virtual disk, volume ? What I create one virtual disk and and one volume for each server ? or create two virtual disk from each storage pool one for mirror and one for parity and expand as needed ?
2- Why I assign drive letter to volume i create. Is there better way to manage this ?
Any best practice document or KB or help will be really appreciated
Thank you,
Adnan
That's a bad idea to mix Scale-Out File Server role with anything else... Make your SoFS nodes feed shared storage to Hyper-V layer and spawn all other services (failover iSCSI, clustered SMB3 and NFSv4) as a set of a separate VMs.
Hyper-V Shared Nothing Cluster. Only two Hyper-V hosts needed.

Icloud storage full - manage storage

Hi,
So my ipad is saying that my icloud storage is almost full and it is preventing me from doing a lot of things.
I go to settings > icloud > storage and backup > manage storage
It says my ipad is using 63.2MB and Mail is using 113.8MB - this obviously does not add up to 5GB, yet my storage is saying I have used 4.8GB of 5GB on icloud.
I have tried deleting the back ups and even turning off back up to icloud. Then I turned the icloud back up on again and did a fresh back up and the result was still 4.8GB of usage wit the above statistics for ipad and Mail.
I am so confused. I am obviously not using 5GB of storage and don't want to purchase anymore, does anyone have any ideas of what is wrong!?
Thanks,
S

iCloud: Backup and restore overview
http://support.apple.com/kb/HT4859
Check iCloud storage & backup space on iPad
http://www.urltips.net/check-icloud-storage-backup-space-on-ipad/336/
iCloud: Troubleshooting creating backups
http://support.apple.com/kb/TS3992
 Cheers, Tom

HP storage server management

Good-day, Are there any known issues with this software deleting files from source location during replication? thanks.

Hi,
Can you check windows event and see what error message appears?
I highly recommend you follow the HP Storage Management Pack for System Center User Guide.
<cite>http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c03112503-1.pdf</cite>
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party
contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I0S7 not performing the iCloud backup. It states I need more storage or manage settings.

What items should I delete (photos, videos, email) in order for my iPhone 5 to perform the iCloud backup? I deleted all the Messages, but it still is not performing the backup. It tells me to manage storage or buy more. Is there somewhere I can see a breakdown of what I have and what the maximum is before a backup cannot be performed?

If the reset does not work try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The message is saying that you do not have enough storage on the iPod. Purchasing more iCloud storage will not resolve the problem. You have to delete some media/items like music, apps, videos from the iPod.

TS4009 HI I have a problem with my ipad, its locked ans says ' this ipad cannot be backed because there isnt enough storage avaulable, manage your storage in stting' when I click on setting, it wont work. it has been jambed on this screen all day.

i have increased my storage too

Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release. You won't lose any data by doing this.

Palletization and storage unit management

Hi,
On the WM view 2 in material master, there is a section call palletization.
Question:
1 u2013 If this material is going to be used in a storage unit environment, is it COMPULSORY to maintain it? If not maintain it, will I face error during TO creation for SU process?
2 u2013 Because we wouldnu2019t know the Storage unit type upfront until when the truck actually stop at our warehouse, and we using scanner to perform TO creation. Thus, under such scenario, is there a way in the system setup to bypass this maintenance in the material master and later still allow me to put in the SUT Type I desire on the spot?
tuff

palleteziation data is maintained in material master so that at the time of TO system can know how much quantity will be stored on which type of pallet and accordingly system will search for the BIN or it will find out that the bin is full
In case you do not mention it in material master then ceratinly you will get the error that please enter the palletelization data during Transfer order creation
Regards
Rahul

Storage Foundation Manager

Similar Messages

Maybe you are looking for