Storage Issue, Other Way To High

Hi, I recently put a new hard disk in my iMac and then used my backup to reinstall my files. When I went to check on my storage of my hard disk on my iMac I noticed that "Other" was at huge 426GB which seems way to high. This is a lot higher than previously and I was wondering how I can reduce it. I have done all the usual things such as empty the trash, clear the cache and delete unwanted files. Is there anything else I should be doing?
I also recently put in a new Hard Disk so am running Yosemite and downloaded from my backup.
Thanks

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
          iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

Similar Messages

  • Built-in Storage Issue (Other at 99%)

    Hi everyone, 
    I'm having an issue with my Blackberry Torch 9810's storage. I took my phone into Bell and all they could say was "Oh, that weird! I don't know, I've never seen that before."... Basically they weren't much help, so I thought I'd post here and hope for better luck.
    I noticed a while ago that my phone's built-in storage was practically full at 99%. About 50% was video and pictures, and the rest was listed under "Other". I couldn't figure out what "Other" was so I ended up buying a media card and transferred all my pictures and videos to it to free up space. Well immediately after doing that, my built-in storage read 99% for "Other".
    I went into Files, and clicked properties for Device (it says it is 99.82%; 6.2 GB of 6.2 GB used). I then opened the device and checked the properties of each folder:
    - Blackberry (8.4 MB)
    - files (70.7 MB)
    - fonts (38.9 MB)
    - home (12.4 MB)
    - start.app (30.8 MB)
    - all single files in Device (roughly 14MB)
    Seeing as that all adds up to only 175.2 MB, I'm not sure where this "Other" could be coming from? 
    My calendar is also acting up. I have it set to save my appointments for forever (there aren't many and only date back to June), but every couple of days they all disappear and I have to restore my calendar using Blackberry Protect. I'm not sure if maybe my phone is deleting them to create space. 
    Sorry this was so long! Hopefully it's not confusing. Any help would be appreciated

    Have you tried a battery pull?  This has happened to me a few times.
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • Hard drive storage issue - "Other" and not showing correct data usage

    I'm currently using a MacBook Pro (Retina 15" Mid 14') which I purchased less than a month ago.
    Based on my "about this mac" storage summary, I'm using over 190GB, yet I can only account 67GB of usage. I've restarted and reindexed my spotlight search twice (once via terminal, next through system preferences).
    Where is all my disc space? What am I missing?

    You might run OmniDiskSweeper and Grand Perspective in Root.  This mat find the discrepancy.
    These are the commands that you will have to enter for each in Terminal
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
    Naturally you will run one at a time, not simultaneously.
    Look at this as a guide:
    http://www.macobserver.com/tmo/article/how_to_recover_missing_hard_drive_space
    Note that when you enter your password, it will not be displayed.
    Before you start any thing, MAKE CERTAIN THAT YOUR DATA IS BACKED UP!
    Ciao.

  • HT1689 I have bought a movie from iTunes it wouldn't load though cause of storage issues... Any way I could get a refund??

    I have bought a movie from iTunes it wouldn't load though cause of storage issues... Any way I could get a refund??

    Hi, Nselkhatib.
    You can report a problem with the purchase via the steps in the article below. 
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/ht1933
    You can also report an issue with this movie by accessing your purchases history in iTunes on your computer.
    iTunes Store & Mac App Store: Seeing your purchase history and order numbers
    http://support.apple.com/kb/HT2727
    Cheers,
    Jason H. 

  • My iPhone 4s notified me that I had to manage my storage  so I deleted  apps that used a lot of space I deleted almost all my picture and it still keeps telling me  I don't have enough storage  is there any other way I can make room on my phone ?

    My iPhone 4s notified me that I had to manage my storage  so I deleted  apps that used a lot of space I deleted almost all my picture and it still keeps telling me  I don't have enough storage  is there any other way I can make room on my phone ?  Were it shows how much storage  I have available it still says 9.9 even after all that I have done so I don't know if I need to change my storage plan or what but anything will help I guess

    Check for 'others' in iTunes against your iPhone.
    Restore from a previous backup to reclaim some of it.
    Still want more, Restore in iTunes, setup as New.

  • Issue: I synced my iphone with itunes, I then deleted many songs from the iphone, when I sync to itunes again is there any way to have itunes duplicate what it sees on the iphone rather than the other way around?

    Issue: I synced my iphone with itunes, I then deleted many songs from the iphone, when I sync to itunes again is there any way to have itunes duplicate what it sees on the iphone rather than the other way around?

    so, if I delete all music on itunes then connect my iphone all my music on the iphone will then be deleted?

  • HT1933 Following the instructions above, I'm constantly redirected to this help page rather than receiving any drop down list to select what my problem is. Are there any other ways to report issues with purchases?

    Following the instructions for reporting an issue with a purchase problem, when selecting "report a probelm", I am not provided with a drop down list, I am redirected to the help page instead.
    Is there any other way to report an issue where the app owner has taken the funds twice for the same product at literally the same time?

    To Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Is there any other ways to check whether is my phone faulty or my sim card issue. I can only use it for call, my network to 3G or 4G suddenly cannot use.

    Is there any other ways to check whether is my phone faulty or my sim card issue. I can only use it for call, my network to 3G or 4G suddenly cannot use. This happen since yesterday, suddenly can use but suddenly cut off. Called Telco and they reset account but still same.

    See this
    http://support.apple.com/kb/TS4148

  • This will be my first time buying a laptop and I was thinking about the macbook pro with retina display but the price is a little to high I was wondering for any suggestions?  Like other ways to get it cheaper?

    This will be my first time buying a laptop and I was thinking about the macbook pro with retina display but the price is a little to high I was wondering for any suggestions?  Like other ways to get it cheaper?

    Actually you could get student discount from apple and a 10% dicksmith with limited time and I think jb hi fi gives even better discount. But lets see what other people think?

  • I want to upgrade my iCloud storage, but as I'm in Spain it won't accept an English card! Is there any other way to upgrade or change country??

    I want to upgrade my iCloud storage, but as  I'm in Spain it won't accept an English card! Is there any other way to upgrade or change country?? Please help!!!

    Andy,
    We are currently in the same situation as you.  Seems we have been "Spoofed",,,, e-mails "TO" us and also sent "From" us.... Both to and from using our old <xxxxxx.mac.com> address.  We are getting about 15 of the e-mails a day.  All from some version of "Med Store",, "Great Medical Store",, "Erect Meds Cheap",, and other variations of same.... Each one has a different "Link" in the text, but we never launch them.
    The amazing part is that for the past six weeks they all indicate that they originate from a different address.  Some foreign and some from US addresses.  So, we cannot write a "Rule" banning the originating address.
    We did write a "rule" that send them to "Junk" and forwards each one to <[email protected]>.
    Anyway,,,, we are ready to change our address, but are in the same "can't be done easily boat" as you.
    Seems we have to start all over and establish an entirely new Apple Account.  (Our old one will remain out in cyberspace forever)..... Seems strange.....
    Our reluctance remains with stuff like our Calendars, Notes, iTunes, Apple Store purchases, etc......
    We have posted questions here and on MacRumors, but seem to never get good answers.....  Most say just "live with it" and maybe it will stop.
    And like you we found out about using Alias' to late... shame on us....
    Very confusing and frustrating.....Still open for any input....
    Mike

  • My bill is way too high

    When I first signed up for Verizon I was quoted approximately $165.00 per month for my services.  For the past two months my bill is way too high.  I had Cox prior to verizon and my bill was much lower and I basically had the same services.  If my bill cannot get lower then what it is I will switch back to Cox.  Please look into this for me.
    Thank you,
    Nicholas Cinco

    Just a friendly reminder, this is a forum where users help other users.
    It looks like your issue may require a Verizon representative to review your account details. Please contact our customer service team at 1-800-VERIZON or at  http://www.verizon.com/contactus
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

  • Ios 8.2 storage issue

    I have an iPhone 5s 16GB. Ever since I updated to ios 8.2, I have had random storage issues. One day after updating I received a message "storage almost full".  30 seconds later another message that my storage was full. Shut off my phone and did a hard reset. No change. Started to delete pictures, videos and apps. Available storage began to increase. After all of this it reported I had 1G available. Phone was good for about 6 hours. Noticed storage was decreasing by the hour and was down to 324 Mb. Deleted almost all my apps. Storage showed 1.3 Gb. Thought problem was solved. Noticed last night storage was 2.0 GB. Thought this was weird. This morning back to square one 0 bytes available. Apple needs to get it together with this update!!  I've read several other post on this forum with exactly the same issue. Deleted a few more apps this morning. 116mb free at this time, but I don't expect it to last.
    Wanted to start a new thread with this problem.

    You don't have enough physical storage space on the device for the update to take place. The process can use ~6 -~7 GB of storage space. You can possibly free up the required space by deleting apps and other data. The easiest way to do the update with all of the deleting required is to update the device using iTunes & your syncing PC. No additional storage space is required on the device when updating through iTunes.
    Beforehand though, you should delete the update residing on your device under Settings/Usage, then under the Starge heading: Manage Storage. A list of installed apps will be displayed here. You can delete the update by finding it in the list (it should be near the top since they are sorted by size, largest first), tapping it, then tapping the red Delete App button.
    EDIT: BTW, after an update, there's no way to revert back to the previous version. If you don't have the required space on the device for the process, the update will simply not install.

  • Is there any other way to do it?

    hi
       is there any other way to do it? if yes please tell me how...
      LOOP AT itab.
        SELECT SINGLE lgort INTO lv_lgort
               FROM zbas
              WHERE werks EQ itab-werks
                AND lgort EQ itab-lgort.
        IF sy-subrc NE 0.
          DELETE itab.
        ENDIF.
      ENDLOOP.
    this creates the perforamnce issue that we can not use select inside loop.plz suggest me the other way to do it..
    i m tryin to do it this way .. will it work
      SELECT SINGLE lgort INTO lv_lgort
           FROM zbas
          WHERE werks EQ itab-werks
            AND lgort EQ itab-lgort.
      LOOP AT itab.
        IF lv_lgort NE itab-lgort.
          DELETE itab.
        ENDIF.
      ENDLOOP.
    thnx

    but on what condition u want to delete the entries in itab ?
    only storage location or any combination of plant and lgort + matnr ??
    You need to fix this thing up .
    1.see the sol'n is first do a select all the entries for the criteria  into a internal table say jtab .
    and
    2. loop at itab .
        read table jtab with key <b>jtab-f1 = itab-f1 }
                                          jtab-f2 = itab-f2.</b>     "if applies
        if sy-subrc eq 0 .
        delete the entry where <condition>.
        endif.    
       endloop.
    ur option :
    SELECT SINGLE lgort INTO lv_lgort
    FROM zbas
    WHERE werks EQ itab-werks
    AND lgort EQ itab-lgort.
    LOOP AT itab.
    IF lv_lgort NE itab-lgort.
    DELETE itab.
    ENDIF.
    ENDLOOP.
    the order is not good for this scenario.
    vijay

  • Temps Way Too High

    Please help me! lol
    I just built a new PC and the the processor is 3.2Ghz P4.  
    It has a Zalman 7000Al/Cu cooler and it hitting a much too high temperature!
    The case has a front 80mm intake fan (not bringing air into the case as its blocked), a 80mm side fan bringing loadsa air into the case and then 2 x80mm fans extracting at the back. Plus the PSU has a 120mm fan over the CPU.
    Now the problem is that at idle the cpu temp is about 45C but in game it rises steeply. When running 3DMark 2003 about half way it hit 65C. That is way too high.  
    Now the thing is that when I feel the zalman it is hardly even hot. So obviously isnt making good contacts. Am I right. If so how do i fix this.
    I Did use artic silver III on the heatsink and a fine amount so that you could just read the writing on the CPU. What else can I do please? Shouldnt the heatsink be at least hot?
    Thanks. Answer quick!
    SAspaz

    Ah, you seem to have the exact problem I only just got over.  I just upgraded my P4C 2.8Ghz's cooler from stock to a Zalman CNPS7000A-AlCu, and at first, I had temperature hell, getting temperatures like you are, but it seems I had just misapplied the thermal paste.  I'm using the included Zalman paste, and from the tests I've seen, AS3 is only just very very slightly better than it, I'm talking maybe half a degree C.
    The way I eventually found to apply it which gave the best result was to put the usual slightly smaller than a grain of rice dollop of the paste right in the middle of the processor, then sit the cooler on top of that, and give it a bit of a twist side-to-side so that it mashes out the paste.  You can take a look underneath to make sure this has given a good spread, don't worry if it doesn't cover the whole heat spreader, it shouldn't, and in any case the core which you are cooling is only under a tiny part of that huge plate.  As long as it's a reasonable size spread, just go from there and install the cooler as normal, and you should find it works fine.  While this method of grease application seems to be against most of the guides I've read, it definitely works fine (I'm getting 29C idle, max 45C load, in a case with absolutely horrid ventilation), and is in fact the way Arctic Silver recommend.
    So give that a try, it worked for me.
    Oh, and on the whole temperature misreporting deal, while I'm pretty sure my CPU is measured fine, is there some kind of issue with the system temp readings?  I should check my BIOS version, but I'm just puzzled in that my system temp tends to read about 40C, which is way more than even my CPU.

  • Any other ways to get parameters of a URL in a window method ?

    Hi,
    In SDN, i find the below two ways to extract the URL parameters, when i pass them while opening a new window. But, unfortunately they dont work for me. so, would like to know, if any other ways are existing to extract the URL parameters.
    1)
    HANDLEDEFAULT method of the window:
    DATA: lt_url_parameters TYPE tihttpnvp.
    wdevent->get_data(
    EXPORTING
    name = if_wd_application=>all_url_parameters
    IMPORTING
    value = lt_url_parameters ).
    2) In HANDLEDEFAULT method, have the URL parameter names as importing parameters and use them normally.
    If there is no other ways, can some one help me in pointing the issue that i face ?
    Note: I have wdevent (CL_WD_CUSTOM_EVENT) importing parameter in place.
    Thanks in advance,
    Gaurav.

    Hi,
    How you are trying to pass your parameters ? I believe you are using some SAP provided template (like for XSS) and relying on passing of some standard parameters. These parameters may be absorbed by the standard component and may not be passed to your WebDynpro Component. You can try passing them as application parameters.
    Thanks
    Prashant

Maybe you are looking for

  • Can you renumber pages in a merged file

    I often merge files from word and exel and other programs.  Can I renumber this new file

  • Errors in system.log since leopard upgrade

    I have a mac mini core duo 1.83, with 2gb ram. It was running Tiger until I upgraded it to Leopard about October 27th. I used the archive and install installation method. It has been running fine. The only "glitch" I have noticed is a very occasional

  • Dynamically Selection Screen Change

    Hi Experts, I have 5 buttons on the application toolbar and on click of each button, i need to populate difference selection parameters. I have tried modifying the SCREEN table dynamically but maintaining SCREEN table for 5 different action seems ver

  • Adobe Ideas file sync problems

    I'm using Adobe Ideas on a third Gen iPad with iOS 7 None of my files will sync to creative cloud. The sync process message simply alternates between 'awating connection', 'analysing' and complete but nothing happens to the files. The progress bar on

  • Harddisk almost full

    HI everyone My harddisk has a storage of 27 GB, but it has been taken up by 20GB. How can i free up more space? BTW, I have already minimise the songs, movies, pictures storage. Hoping to delete some program that takes up the storage. I am a new MAC