Storage location as selection criteria in MC42

Hello,
Transaction MC42 gives a very good information for stock management, however we need to have the analysis restricted by storage location.
Is it possible to create a new Z program by copying RMCBRW30 and add "Storage Location" as selection criteria? Or there is another standard solution?
Best regards,
Helena Peixoto.

Have you ever looked into the coding of  this program ? and read how the data is retrieved and from which source?
Just adding the location as selection criteria is not sufficient.
Most important would be to have knowledge how the data is captured and stored in infostructures. If it is not stored with storage location as aggregation level, then you will not have a chance to get the result according to storage location.......except.......you are doing planning at MRP area level (a MRP area can be a storage location). And MRP area is already in the selection.

Similar Messages

  • Cycle count Storage location selection

    Hi,
    Could someone explain to how the Storage locations are selected when I run transaction MICN.
    Our settings in config are like this
    I have a material in one storage location, it has never been counted. I run the transaction MICN for that material in my plant with today's date nothing is returned. I change the date to one year in the future and the system returns many locations including the one the material is in. I can comprehend that because the count date is empty in the mard table, I have to enter a future date but why do I get many location where the material is not even stored in?
    By the way as we only want to count all our items once per year, they have all been set with the letter D in the material master.
    Kind Regards
    Thierry

    Where do you see the advantage of cycle counting if all your materials are classified with D?
    In that case you can just use MI31 and do annual inventory.
    If you have no last count date, then SAP uses the creation date if the accounting view.
    Which is for all materials equal if you loaded them before go-live.
    And the storage location is coming from MARD table, all locations for which your material was created. And because you did not activate the box to exclude the materials with zero stock.

  • Storage Location wise stock report

    Can any one let me learn, How to get storage location wise & selected date wise stock report in standard SAP

    HI,
    Then you use T.code: MB51, where you will find the Date Range besides to Storage Location.
    Regards
    VG

  • Storage location list during Confirmation

    Hi! I discovered during confirmation of the goods in SRM (SRM 4, extended classic) that when I choose to list the storage location for selection, although only the relevant storage locations are listed, there are gaps in between the storage locations. I suspect that it is taking the sequence of the order in the user attributes.
    For example, if I maintain the attributes in the following fashion:
    Plant   SLoc
    0001   0010
    0001   0020
    0002   0010
    0002   0020
    0002   0030
    On saving the attributes, it will be sorted and shown like this:
    Plant   SLoc
    0001   0010
    0002   0010
    0001   0020
    0002   0020
    0002   0030
    If my order is for plant 0002, on listing the SLoc for the item during confirmation, I get the sloc listed like this
    <blank>
    0010
    <blank>
    0020
    0030
    What I would like to achieve is for the system to show the storage location valid for the plant and as per maintained in the attributes
    0010
    0020
    0030
    Does anyone have similar problem as described? What should be the standard behavior?
    Cheers!
    SF

    Hi! I found this note 632616 but it is about listed the details of the plants and logical system so that the user knows which storage location to pick. It did not specially talk about the blanks/gaps.

  • Storage Location Authorization

    Hello,
    I want to authorize user A to make material movements in     Plant 1001  Storage 1000, 1001, 1002...9000
                                                                                    Plant 1002   Storage 9000
                                                                                    Plant 1003   Storage 9000  etc.
    So,  first I followed path SPRO - MM - Inventory Management and Physical Inventory - Authorization Management - Authorization check for storage management   and enabled storage authorization.
    Then In PFCG under Goods Movement: Storage Location I selected related storage locations and plants as above but it still allowed user A to make movements to storage 1001, 1002 of plant 1002 and 1003.
    In our system every plant has storage locations called 1000,1001,1002...9000. Does the system recognize the storage locations selected in PFCG according to the plants selected. To be more precise, ıf I select, 1001, 1002 and 1003 for plants, and
    (plant-storage loc) (1001-1000, 1001-1001, 1001-1002, 1002-9000) does the system recognize it as if I want to be authorized for 1002-1000, 1002-1001,1002-1002  ?

    Hi
    You can do it additive, for instance.
    Only can create movement 101 and 102, others only view them:
    ACTVT = 01,02
    BWART = 101, 102
    LGORT =  *
    WERKS = *
    and add newly the object M_MSEG_LGO with other parameters.
    ACTVT = 03
    BWART = *
    LGORT = *
    WERKS = *
    Of course, you have other auth.objects (eg: M_MSEG_BWF, M_MSEG_WMB,...). If other object avoid that the user can do it, run tcode SU53, it will tell you what object avoid that user can do it.
    I hope this helps you
    Regards
    Eduardo

  • Create storage locations

    Hi,
           There is  a requirement to do a mass creation of storage locations.  While creating a storage location, I have to upload data such as
    1) Address realted data for storage location(Name, streetm Postal code,city
    2) storage type, storage section, print params from storage location
    3) WM connect, MRP, fixed bin assignment
        Is there any BAPI that suits this requirement.
    What is the tcode for storage location creation and updation of this data.
    Thanks in advance,
    Vishnu Priya

    Hi,
                In OX09 tcode on the left  pane, if  the 'Address of storage locations' is selected, I got a list with a field labelled 'No.' Is that the address number? Where do I need to update the street/houseno, postal code, city details etc.
    Thanks for your quick replies.
    Regards,
    Vishnu Priya
    Message was edited by:
            Vishnu priya

  • Error in storage location determination in VL02N for cross comapny stck trf

    Hi,
    currently we are doing intercompany stock transfer & after VL10B we are doing VL02N & we are getting an error "enter storage location cross company stock transfer".
    where as we have already define the storage location in OVL3
    error message text
    message type-E
    message class-M7
    message number-018
    message variablr1-stor.location
    Regards,
    Tushar

    First check whether in MMSC that storage location is maintained.
    Also Standard explanation for M7018 is as follows:-
    If the storage location or batch is missing it may be possible to enter
    * in the field and branch into the  storage location/batch selection
    list. You can find out whether this function is defined for this field
    via the F1 help.
    Procedure
        Enter a value in field "" or press F4 (possible entries).
    From the above, it is clear that in VL02N, you have to maintain the required value.
    thanks
    G. Lakshmipathi

  • Storage location selection in RQAAAS10 QA07

    hello
    i want to run trx qa07 storage location wise.
    is it possible to run this report for specific storage locations?
    or is there any user exit to control inspection lot or material document creation for storage location?
    my main purpose is
    1- create inspection lot and material document only for ( storage location x)
    but if if it is not possible, material creating material document in storage location wise will also solve my problem.

    hello
    what you mean by one by one?
    there is only material in selection screen. there is no field like storage location?
    the problem is because of decentralised warehouse scenario. system do not allow to make stock movement from decentralised WM storage location and  regular storage location at the same time. If same batch is in different storage location, we have problem. if there is no stock in decentralised WM managed storage location, there is no problem with material document from different storage locations.
    So we have to options:
    1- not to allow stock movement for decentalised WM managed storage location
    2- to do another material movement for each storage location
    Edited by: Bilfar Holding on Sep 16, 2009 7:52 PM

  • Criteria or points to consider while deciding storage locations

    Hi buddies,
    We are implementing SAP in steel industry, can anyone let me know wht is the criteria or points to consider while deciding storage locations and what should be an ideal naming convention for storage locations.
    Regards,
    Sachin Narvekar

    It is also depends on the business requirement .If the existing system does not follow any logic then you can use as below
    1. You can create material type wise storage location
       Raw material Sto loc - 1001
       Packing material        -  2001
       SFG                           -  3001
        Trading goods          - 4001
        FG godds                -  0001
    advantage of this approach is stock reports ,inventory documents can be created at storage location level and easy to track material and logicaly correct.
    2. Some exceptional cases you have to  use separeate storage location .for example production  return to some blocked storage location

  • Automatic storage location selection while doing usage decision

    hi gurus,
    My client wants to do automatic determination of storage location depending upon usage decision.
    i.e. if usage decision is reject than gr to be done at rejection storage location. if usage decision is accepted than gr to be done at respective storage location.
    The storage location can be changed manually but they require automatic determination of storage location.
    Regards,
    Deven

    hi, deven,
    go to qs51, select catalog 3 enter plant
    select selected set that u used for the plant that u select
    in posting proposal ud tab u select inventory posting automatically for return delivery , unrestricted stock etc
    u just r & d with in that t code
    if u get solution please share with me too
    regards,
    umesh

  • HT2470 Why won't Itunes store my music library in my User/Music Folder, if I select my user name as a storage location in Itunes, Itunes creates folders for artist name right in my user folder, instead of in my user/music folder

    Why won't Itunes store my music library in my User/Music Folder? 
    If I select my user name as a storage location in Itunes, Itunes creates folders for artist name right in my user folder, instead of in my user/music folder.  This gets especially annoying because if I tell Itunes to store my "media" in my user/music folder, Itunes will then create a folder named "music" in my "music" folder and will also create additional folders in my user/music folder location to store other non-music media in as well. It is very annoying to see this lack of affinity for folders between two Apple created programs.

    Help iTunes locate your media folder:
    No content shows up in iTunes after updating
    http://support.apple.com/kb/TS1967

  • Automatic selection of products in a plant but differant storage locations

    Hi Gurus
    Here is a requierment from our client that is they maintain differant storage locations based on differant prices however they want automatic selection of products during sales order entry, based on manufacturing date like FIFO comparing differant storage locations with in a plant. if you have come across these scenario and other solutions relate to this
    please share your experiance
    with regards
    Baalakrushnan.da

    hello, friend.
    yes, we have come across this.  first, your material should be batch managed specifying FIFO.  then, inventory/availability search should be plant level instead of storage location level.
    i will try to get back to you with the specifics.  but in the meantime, you could probably get your MM consultant to help you with this.
    regards.

  • Receving Storage location in MB51 selection screen

    Dear Guru's
    PL. Tell Me How I Will  get  Receving Storage location in MB51 selection screen.
    Thanks,
    Tushar Barot

    Dear Tushar,
    there is nothing like receiving storage location
    in MB51, go to storage location field than click option multiple selection
    then give required storage locations
    so u can get the data of the storage locations which you have given
    Regards
    Madhu

  • Storage location selection for variable size item

    Hi All
    There is a BOM of finished good Material "XYZ" and there is a component "A" in the BOM. This Component A is a variable size item, its a metallic bar of length 4 meters.  In BOM XYZ, only 1.5 meters is consumed.
    Now when a production order is made for XYZ and the confirmation is done with movement type 261. All the materials are backflushed along with component A . The client's requirement is to transfer the remaining length of component A (i.e. 4 - 1.5 = 2.5 meters ) to a different storage location at the time of confirmation.
    Please let me know how is it possible.
    Thanks in Advance
    Rohit

    FULL STEPS:
    1.first do mb1b 311 mvmt transfer posting  for the components from raw-stor location to prod stor location. you can do for A
    2.  do GI for the components. for A for that final product . consume 1.5 so. the remaining component will be (3 ) there in the stor. location as per sap. (check in mmbe)
    3. then do mb1b 311   transfer posting for the A component to raw-stor location. from the prod stor location.
    or rever the  transfer posting mb1b 312.

  • MB5B Movment type and storage location is reset

    When I run the report MB5B with radio button "valuated Stock" active for a specific Plant and Movement Type, I get a Message "Movement Type is reset" and then the entered Movement Type disappears from the selection criteria.
    However the report does not give me this message when the radio button "Storage Location/ Batch Stock" is active.
    Also, When I run the report MB5B with radio button "valuated Stock" active for a specific Plant and Storage Location, I get a Message "Storage Location is reset" and then the entered Storage Location disappears from the selection criteria.
    However the report does not give me this message when the radio button "Storage Location/ Batch Stock" is active.
    Please tell me why does this happen when the radio button "valuated Stock"  is active ?

    Dear All,
    I am facing the problem as said in the thread.
    My two queries are as follows:
    Query 1:  In MB5B report When we select the valuated stock option ,We are unable to use movement type , storage location in the selection criteria nad getting the below messages.
    M7284 - Storage location is reset.
    M7298 - Movement type is reset .
    Query 2 :In MB5B report total receipts and total issues is showing incorrect values.
    Here say for example I prepared the grn, cancelled the grn and again made the grn. Here total receipts is considering in such a way that all the grn quantities are considered. and cancelled documents are considered as issues.
    ie  have received material = 100 Nos 01-12-2009
    cancelled grn:100 Nos
    Redo grn:100 Nos
    Done transfer posting 415 Q = 10 nOS = 02-12-2009
    Issued = 10 nos = 02-12-2009
    In mB5B 01-12-2009 to 02-12-2009
    We are getting Opening stock= 0 which is correct
    Total receipts = 100(GRN IST TIME)+100(GR SECOND TIME) +10(TRANSFER POSTING)=210
    Total issues = 100(CANCEL GRN)10(TRANSFER POSTING)10(GOODS ISSUE) =120
    Closing stock = 90(CORRECT)
    Here actual recipt: should be 100
             actual issue should be 10
    Here though the closing stock is correct , 415 transfer posting is considered as issue and receipt.Becoz of this total issues quantity report is going wrong.
    Please give your valuable suggestions to the above two problems seperately.
    Regards,

Maybe you are looking for