Storage location custom determination in MRP both for Make that for comps

Hi experts,
i have a requirements enough difficult for me and i'm in trouble.
I try to summarize.
i have one sap plant but differents building using different warehouse and work centers. The requirements from my customers are the following:
During MRP run planned orders for make materials have to contain the receiving storage location that may be XXX if make material is used as comnponents in an other planned o production order that uses a work center mapped in the same XXX storage location ord may be YYY if is used in an other planned order/production order a work center mapped in another building/storage location.
Contemporary the issue storage location of the components present in the planned order (retrieved from BOM) have to contain a storage location that depends on the work center of retrieved routing.
Is there any BAdi or other suggestion to do this and obtain it in one run of MRP? also because once modified the issue storage location of the components this will be the input for creating properly the Purchasing Requisition item to the correct Storage location.
Last point is that this logic have to apply also in creating manually a production order or performing a "Read PP master data function" inside a production order not yet released.
Do you feel feasible a development like this?
or do you suggest a workaround?
Thank a lot
Ugo

Hi,
we do not maintain in BOM or in prod. Sloc. in material master data. The flow is a discrete production wiht SAP-PS so i noticed that supply area in work center doesn't affect the storage location determination. So i need determine with 2 different logic the receiving storage location for the assembly (based on a custom way) and then determine the storage location for the components as the same of st. location linked to supply area in work center (all materials of the bom are linked to the first operation of the routing). The sloc of the components of the bom have to determined in that way because i need that the related purchasing requisition have to be created in the correct storage location (the one of the work center in which the material is used).
Thanks a lot
Ugo

Similar Messages

HT2470 Why won't Itunes store my music library in my User/Music Folder, if I select my user name as a storage location in Itunes, Itunes creates folders for artist name right in my user folder, instead of in my user/music folder

Why won't Itunes store my music library in my User/Music Folder?
If I select my user name as a storage location in Itunes, Itunes creates folders for artist name right in my user folder, instead of in my user/music folder. This gets especially annoying because if I tell Itunes to store my "media" in my user/music folder, Itunes will then create a folder named "music" in my "music" folder and will also create additional folders in my user/music folder location to store other non-music media in as well. It is very annoying to see this lack of affinity for folders between two Apple created programs.

Help iTunes locate your media folder:
No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967

Storage Location Error duing GR of Subcontarct for The Sales Order Stock.

HI ,
Is there any settings to avoid individual entry of Storage Location field for the child components during the Goods Receipt from Subcontractor for the Sales Order Stock.
As per SAP standard , I have created Separate storage location for Sales order stock components as the Stock provided to vendor . While receiving the header component , System showing error to enter storage location for all the BOM component s . My Requirement is , Storage location should come automatically for the child component while receiving the Header Component.
Yogesh.K.

Hi Jurgen,
He's right, the posting is not a bug.
In case of MTO scenario, if components are managed in the sales order / project stock system withdraw them from storage location.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/4d/2b90b043ad11d189410000e829fbbd/frameset.htm
The subcontracting orders are account-assigned to a sales order or a WBS element. Thus, the components are not transferred (using a transfer posting) to the "stock of material provided to vendor" but are directly withdrawn from the sales order stock or the project stock at the time of the goods receipt.
Since the components are not transferred to the "stock of material provided to vendor", we recommend that you use a transfer posting to transfer the provided components to a new storage location (for example, 9999). This enables you to obtain an overview of those stocks that are physically located at the subcontractor. This information is particularly important when you carry out a physical inventory of the sales order stocks and project stocks.
Cs.
Edited by: Csaba Szommer on Jan 5, 2010 7:17 PM

Item category (Customized )ZJT1 and MRP type for material is not allowed

Hi Guys,
When i try to create the order i see the error as item category and MRP type of the material is not allowed.
I checked in Vov5 table, i could observe that Schedule line category is maintained.
Could you please help us in resolving this..
Thanks and regards,
Rahul

Hi,
Please assign the Item Category ZJTI and MRP type (for eg: PD) assigned to the schedule line category in IMG under Sales and Distribution--> Sales ---> Schedule line -->Assign schedule line
Hope this resolve your issue
Regards,
KrishnaO

I cannot import from my camera. It tells me I need to set up a storage location under preferences but I do not see that option in preferences.

I just started and I trying to import videos from my camera but it says I need to set up a storage location under preferences. When I go to FCPX preferences there is no storage option. What do I do?

Jeremy CS wrote:
When I try to import an iMovie Project on my desktop, Final Cut Pro X crashes.
Jermey CS,
Did you actually move iMovie Project to desktop? While you are in Final Cut Pro X, and if you try to import iMovie Project, it kinda of knows where to find original files made by iMovie.
Only a big if you leave the original iMovie Project and iMovie Events as it is inside Movie Folder on your computer. IF that is the case, then Final Cut Pro X knows where to find iMovie files when you wish to import iMovie Project.
I am not sure why you move around and move files all over the place. I am afraid that you are asking for more trouble or problems unless if you understand what to expect and what's not.
Hope that helps. Good luck.
Brian

How will the plant and storage location be determined automatically in PO

Hi,
In ME21n, I have entered Vendor, Material and Qty; also the info record is maintained. Now if I save the PO, the plant and Sloc should be auto determined. Where will I have to maintain this information.
In master data the net SLOC for EP is maintained in MRP view.
The SLoc value is getting populated if I enter the Plant.
But I want that the Plant should also be auto populated. Please provide a solution.
Thanks and Regards,
Yogesh Walke

Hi,
You can create a Transaction Variant for creation of purchase order with your favorable plant.
Use T.Code :SHD0,enter the T. Code: ME21N and enter in Transaction Variant: ZME21N and later
confirm screen entry with your favorable plant to proceed further.
Now create purchase order with ZME21N and find your your favorable plant
Refer how to create Transaction Variant
How to Create a Transaction Variant
Transaction Variant - A Step by Step Guide for Creation - Code Gallery - SCN Wiki
Regards,
Biju K

MRP for storage locations

Hi,
One ROH material is extended to 2 storage locations (A,B). ROH is a BOM component for 2 intermediates.
ROH Storage location A - Material Master
ROH Storage location B
Each tank cannot go less than 10 tonns and cannot exceed more than 50 tonns
Re order point 25 tonns.
Order lot size is 35 tonns.
MRP will consider only one storage location A during requirements generation, becuase material master updated with storage location A only.
My requirement like MRP should consider the both storage locations during MRP run and generate the requirements as per the re order point for inventory.
Regards,
LV

Hello
I suggest you to use MRP areas to plan each storage location separately.
With MRP areas you can define different MRP parameters for each storage location and they can be planned independently.
See the following link for more details:
Determining and Assigning Storage Locations to the MRP Area - Special Planning Processes - SAP Library
BR
Caetano

Help required -for MRP Run at storage location level

Hi ,
we need to have separate MRP fro two storage locations with direct procurement from Storage locations. Right now we have MRP run at Plant level for all the storage locations. we donot want the materials in these two storage locations to be planned at Plant level only with Separate storage locations. Plant level MRP will run for the other storage locations .
I have created separate MRP areas for the storage locations & activated MRP for MRP Areas client level. material masters for the two storage locations have been asigned the MRP areas & maintained the MRP area data in material master .
When we run the MD01, the Planned orders are getting created at both MRP areas plus at the Plant level.we donot want the planned orders creation at Plant MRP area level-only at the storage location level for those two storage locations MRP areas.
Can anybody guide me -how to achieve that ? Did we miss any configuration?
I tried to maintain scope of planning & getting error for parallel processing .
Do i need to maintain parallel procesing with servers ?
Pls need your input on this. Any help will be highly appreciated .
   Thank you in advance.
    Regards,
    Krish.

Hi,
     Go to IMG settings 'Materials Management + Consumption-Based Planning + Planning + Define Storage Location MRP per Plant' Enter your Plant, It will show list of storage location in that Plant, then select 2 in 'MRP Indicator' field for storage location for which u want to plan seperately.
Hope It will clear Your Problem
Regards
Sunil Kumar

Help required !! For MRP at Storage location level

Hi ,
we need to have separate MRP fro two storage locations with direct procurement from Storage locations. Right now we have MRP run at Plant level for all the storage locations. we donot want the materials in these two storage locations to be planned at Plant level only with Separate storage locations. Plant level MRP will run for the other storage locations .
I have created separate MRP areas for the storage locations & activated MRP for MRP Areas client level. material masters for the two storage locations have been asigned the MRP areas & maintained the MRP area data in material master .
When we run the MD01, the Planned orders are getting created at both MRP areas plus at the Plant level.we donot want the planned orders creation at Plant MRP area level-only at the storage location level for those two storage locations MRP areas.
Can anybody guide me -how to achieve that ? Did we miss any configuration?
I tried to maintain scope of planning & getting error for parallel processing .
Do i need to maintain parallel procesing with servers ?
Pls need your input on this. Any help will be highly appreciated .
Thank you in advance.
Regards,
Krish.

Hi Krish,
Go to following IMG path and check out your settings -
IMG>>>Production>>>MRP>>>Master Data>>>>MRP Areas>>>
(1) Activate MRP for MRP Areas -
Is that activated?
(2)Define MRP areas>>>> Do setting s as per Storage Location
Then run MRP.
MRP Areas
In this IMG activity you define whether MRP is to be carried out with MRP areas. In addition, you define the MRP areas for each plant in which you would like to carry out this type of materials requirements planning.
The MRP area represents an organizational unit which carries out materials requirements planning independently. The results of the planning run are displayed specifically for each MRP area. An MRP area can include one or several storage locations of a plant or stock with a subcontractor.
You can assign a material to various MRP areas.
Basically, there are three types of MRP areas:
Plant MRP Area
Initially, the plant MRP area includes the plant with all its storage locations and stock with subcontractors. When you have defined MRP areas for storage locations and for subcontractors and you have assigned the materials, the plant MRP area is reduced by exactly this number of subcontractors and storage locations, as they are now to be planned separately.
MRP Areas for Storage Locations
You can define an MRP area that consists of a particular storage location by creating an MRP area and assigning the storage location to it. Material requirements for this storage location are then planned separately from the rest of the plant. You can also group several storage locations into one MRP area by creating an MRP area and assigning the storage locations. These storage locations are then planned together.
MRP Areas for Subcontractors
You can also define an MRP area for each subcontractor. Using an MRP area, it is possible to plan the components to be provided in subcontracting, by defining an MRP area for each subcontractor and assigning the components to be provided. You can therefore plan the requirements to be provided for these components for one subcontractor separately from the usual requirements.
Up to now, MRP at plant level had been carried out. The various requirements were combined in the planning run and procurement elements were created for these pegged requirements with unknown sources.
The introduction of MRP areas enables you to carry out material requirements planning and know the source of the pegged requirements and to be able to distinguish between them. The source of the pegged requirements can be, for example, production on a particular assembly line or a subcontract order.
Material requirements planning for each MRP area allows you to have specific control over the staging and procurement of important in-house production parts and purchased parts for each shop floor and assembly area.
Hope this will give you more idea about the same.
Satish

MD04 - Subreq - Storage location MRP area

Hi all,
I have an issue of Subreq in MD04 which is not assigned to the the good MRP area.
I'm explaining :
Business process
   -> I work with a subcontractor
        case 1 : either I buy raw material to be processed and delivered it directly to my subcontractor
        case 2 : either I send raw material from my physical stock to my subcontractor
   -> I create subcontracting purchase order with indication as components, the raw material.
   -> In case of the components are already in my subcontractor (case 1), the reservation (Subreq) should not consume my physical stock.
   -> In case of the components are in my physical stock (case 2), the reservation (Subreq) should consume the physical stock.
Solution choosen
Then I decided to create a storage location MRP area : "EXTERN" as External.
I assigned a storage location "EXT" to this MRP area.
I assigned this MRP area to the material in MRP1 / MRP Area.
In the purchase order, in the components popup,
For case 1 : I assigned "EXT" as Prod.Stor.Loc and Supply area
For case 2 : nothing special is filled
Issue
For the case 1, althought I assigned the storage location "EXT", the Subcontractor Requirement is not attached to the good MRP area.
WHY?
Remark : I didn't use the subcontracting MRP area because I would like to have 2 cases : case 1 & case 2.
Thank you in advance for your help about this problem which make me nervous !

Hello Catherine
Your system is working as designed. The following note explains the system design in more detail:
503497 - Subcontracting and MRP areas
Take a look on the relevant information provided by this note below:
Reason and Prerequisites
The most important point to understand the system behavior is the fact that the withdrawal of the (subcontracting) component is generally carried out during the goods receipt for an SC procurement proposalfrom the subcontractor stock that is managed at plant level from an inventory management point of view and that has no reference to a storage location at all.
This causes that subcontractor requirements can never enter a storage location MRP area, since you can later not post the withdrawal from this MRP area.
Thus SC-requirements always enter the SC segment of the plant MRP area or the SC-MRP area.
The SC MRP area in turn is supplied by stock transfer reservations from the plant MRP area or via third-party order processing through procurement proposals with goods receipt directly to the subcontractor. A supply through the materials planning from a storage location MRP area is not possible.
For the above reason, SC-requirements do also not carry any storage location, since the storage location does not have any control function at all for SC-requirements:
You cannot and you should not determine a storage location MRP area (see above), and the subcontractor MRP area is determined via the vendor of the procurement proposal, thus it is independent of the storage location.
See also Note 376050 on this topic that makes a modification available which prevents the deletion of the storage location in the subcontractor requirements, so that you can use, for example, customer-specific reports to analyze the storage location.
Please observe that the mentioned modification note 376050 only makes the storage location available on table RESB, so that you can use it on custom report. This modification will not make the storage location to be considered by MRP or on MD04.
BR
Caetano

Storage location determination at Sales Order

Dear All,
Could we storage location determine at sales order level ?
As per my requirement. Stock is available a particular plant example below
Plant
Storage Loc
Stock Available
Batch
1305
1300
10
1000190
1305
1300
10
1000890
Got order from customer is 15 Quantities and the sale order is confirmed because stock is available but at the time of delivery storage location is determined on the particular material so batch is picked automatically on base quantity other other is showing open. So could u plz give me solution for storage location determination on sales order level.
Thank You!
Chakradhara

Being an old member of the forum, I dont want to highlight the importance of adhering to forum rules. This topic has been discussed many times here and if you search in SCN or Google it, you would accept this has been discussed many times. Please adhere to forum rules and avoid posting such repeated queries.
G. Lakshmipathi

Storage location-determination of return-deliveries (delivery type RL)

Is there a difference between picking storage location-determination of return-deliveries (delivery type u201CRL Returns (pur.ord.)u201D/return to vendor) on 4.6C compared to ECC6.0? Is there a SAP-note?
Within 4.6C-system the storage location is determined based on the customizing settings (Logistics Execution \ Shipping \ Picking \ Determine Picking Location \Assign Picking Locations).
Within ECC6.0-system the storage location in the return-delivery is always the storage location that is entered in the Return-Purchase Order. It seems like the customizing-settings are no longer beeing taken into account.

This storace location-determination of return-deliveries (delivery type RL) in customozing that you mention is only true within the 4.6C-system. Within the ECC6.0-system the storage lcoation is always the one that is entered in the return-purchase order. In ECC6.0 the customizing settings you are refering to a no longer valid for deliveries with delivery type RL.
The questions is why/ and is there an OSS note.

RLM MRP execution at storage location

Hello Friends,
Need help - I am configuring RLM with MRP - need help with below:
Requirement: I need to run MRP at the main storage location first (requirement is from Plant Maint order), followed by another MRP run at secondary storage locations. I want to deplete stock in the main storage location before using up stock at secondary storage locations.
This is not for re-order point planning (VB) for both storage locations, I know that I can plan MRP separately at storage location levels, but that only works with re-order point replenishment.
Is MRP area configuration my only option?
If possible I want to avoid MRP area configuration - I hear once it is configured we can revert back!

Hi Joe,
As per your client requirement, you need to run MRP at Main storage location, and want to avoid performing at storage location, here you can define the supply chain derivation via plant Mainteniance order by using using item category and transport requistion in RLM Configuration. you have option to select the order type order type item category ( ), item category change rule ...( newer change item category) & direct prourement type ( SAP Std ).
Yes MRP Area is the only option, the MRP first as plant level is the option, check in setting ie Step-3 Supply process derivation via plant ( supply type PD).
The parameters for the RLM Supply Process are a combination of the following:
· Material requirements planning (MRP) type at the requesting plant or storage location (the plant making the request for materials)
· MRP type at the supplying plant or storage location (the plant or storage location supplying the material)
· Special procurement type at the demanding plant or storage location.
For more information pls check this link..
http://help.sap.com/saphelp_47x200/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm
http://help.sap.com/saphelp_oil472/helpdata/en/83/496c3a411aab70e10000000a114084/frameset.htm
BR
Satish

Situation in Storage Location Determination

Hai,
I have a scenario where I have to determine a different storage location based on the sales doc type. On searching the forum here I learnt that I should use USER EXIT to achieve this.
I want to know whether I can use situations to handle this scenario.
I am able to define situations. But where can I assign these situations? In SO or Delivery document?
Will be thankful if anybody helps me out in this issue regarding the 'situation'
Regards,
Maheshwaran. I

Hi
Storage Locations are Determined in the delivery document based on The priority rules like MALA or RETA or MARE
Here the RETA rule is Storage Location Determination determination based on shipping pt + delivering plant and Situation
The difference between MALA and RETA is these two are same (shipping pt + delivering plant)
MALA uses storage conditions as the third factor
RETA uses situation as the third factor
RETA is used in trading scenario
But both of these are used or assigned to delivery types only via t code OVLQ
So using situation will not help you to Determine Storage Location in sales doc type
Storage location is normally not determined in sales order
It is determined only in delivery
If you want storage location to be determined for sales order then you have to use user exit
If storage location is specified manually in sales order then it is copied into delivery
Otherwise it is determined using either MALA,RETA or MARE rules which we specify in delivery doc type
For sales order you have to use usetr exit in program MV45AFZZ
To determine storage location in Sale Order, there is no configuration available and it has to be achieved using exit USEREXIT_SOURCE_DETERMINATION in program MV45AFZB.
Maintain a zee table with the values based on which you want the storage location determination to happen. In the exit ask your abaper to write the code to pick up the relevant records based on the criterion and then fetch the storage location. This way storage location will be automatically populated in the sale order.
You can try incompletion procedure option
Put the storage location field in the sales order item incompletion procedure
Regards
Raja

PGI Error for Storage Location

Hi Team,
While Creating a dekivery i am facing a error of
The storage location is not defined for delivery item 000010
When i manually enter a Storage location in Picking again Second errors comes
"Material T831 is not defined for sales from Indienm.Sikkim"
When i click error agin i recive the Error called
:Material T831 does not exist in plant BP01"
I have check all the old Threads But still i am reciving this error
Kindly help me out
Regards
VP*

Hi SAP SD,
 Check the plant in which you have created the material.
Check the shipping point determinationu2014OVL2
Shipping condition of Customer+ loading group of Material + Plant+ Proposed Shipping point +Manual shipping point
Check the Storage location Determination-OVL3
Shipping point+ Plant+ Storage condition + Storage location
Check the plant for the shipping point & storage location it should be same
If everything is configured properly check in Delivery- Picking Tab the storage location will determine automatically.
Let me know if your problem is solved
Regards
Pradeep

Storage location custom determination in MRP both for Make that for comps

Similar Messages

Maybe you are looking for