Storage location determination Automatically while doing UD level

Hi ASAP,
Hope you must be doing great.
I wanted to determine storage location of material automatically while doing UD .
Storage location is Determining automatically for movt. type 101/321.
But for Movt. type 103/105, System is not able to determine Storage Location of material automatically while doing UD.
Dear Expert I have done the required config. for plant & Movement type respectively to determine Storage location automatically.
If I require any hard coding to determine Storage Location automatically while doing UD,plz let me know.
Thanks & Regards
Manoj Singh

Hi Gobi.....
I believe that Stock determination strategy will be use only for stock removal, plz correct me if I am wrong
Now coming to our cases.
As per config. done for Plant & Movt. type 103/105, System is able to determine SL at PO automatically.
When I am using 101 to Post GR, In MIGO System is populating SL field automatically and same Storage location is being carrying on to UD Storage location.
But for 103 case is different, though 103 is conditional movt. type ie by default you have assume that mat. is faulty.
In this case , while doing UD SL has to determine automatically,
Now plz suggest me what to do,
I have cross verified from our other client, there manually, SL has to be populated, but over here client want that SL has to determine automatically.
plz help me.
Regards
Manoj

Similar Messages

Storage location field missing while doing GR with PO number

When I receive goods from a PO, the storage location field missing from MIGO with 101. Material been extended with storage location and entered in PO. But sloc field totally greying out while I receive goods with PO.
I tried other way to receive goods , but storage location disappears when I save it.
MMBE shows stock as on order before reciept , after I post goods, material document created but stock disappears. Not even in the plant.
Can anyone help , please?

<i>The following from other message thread solved my problem....</i>
Stephen Birchall
Posts: 1,095
Questions: 1
Registered: 3/27/07
Forum points: 1,566
   Re: Material Classifications and Purchasing cycle
Posted: Apr 23, 2007 9:26 AM    in response to: Dushyant C Koth...       Reply      E-mail this post
Hi,
You create the material in MM01 and select the non-valuated stock material type.
When you create a PO for this material the system will ask you to enter an account assignment category (such as K for cost centre etc.) Indicate the GL etc that you want the costs to be posted to (Stationery, office supploes etc.).
When the items are received, post the GR as normal (with MIGO). At GR the total value of the items will be posted to the correct financial accounts and the stock quantities will be updated.
Then when you have consumed anything you post a goods issue (MB1A or MIGO) and this does not post anything to the financial accounts (it was all posted at GR) but it does reduce the stock figures.
This process is ideal for ANY low value / high volume items, because the stock is managed correctly but you do not have many hundreds of tiny financial posting as each low value item is consumed.
Steve B

Determine Storage Location of material automatically while doing UD .

Hi ASAP,
Hope you must be doing great.
I wanted to determine storage location of material automatically while doing UD .
Storage location is Determining automatically for movt. type 101/321.
But for Movt. type 103/105, System is not able to determine Storage Location of material automatically while doing UD.
Dear Expert I have done the required config. for plant & Movement type respectively to determine Storage location automatically.
If I require any hard coding to determine Storage Location automatically while doing UD,plz let me know.
Thanks & Regards
Manoj Singh

Hi Gobi.....
I believe that Stock determination strategy will be use only for stock removal, plz correct me if I am wrong
Now coming to our cases.
As per config. done for Plant & Movt. type 103/105, System is able to determine SL at PO automatically.
When I am using 101 to Post GR, In MIGO System is populating SL field automatically and same Storage location is being carrying on to UD Storage location.
But for 103 case is different, though 103 is conditional movt. type ie by default you have assume that mat. is faulty.
In this case , while doing UD SL has to determine automatically,
Now plz suggest me what to do,
I have cross verified from our other client, there manually, SL has to be populated, but over here client want that SL has to determine automatically.
plz help me.
Regards
Manoj

Plant and Storage Location determination at Item level during Copy control

Hello Freinds,
We are experiencing issues within Sales Order creation when the line item is referencing a contract. The plant and storage location is being determined from the contract - this should not be done, we have an enhancement in place for sales order plant/storage location determination which is how these values should be determined.
Kindly suggest, if it can be achieved through configuration setting at Copy control level, to avoid the Plant and Storage location determination from Contract in to Sales Order.
Thanks,
Anup Bansal

Hello
You can mention the additional logic of redetermining Plant and storage location whenever copied from contract.
In a sale order, i think you are maintaining a enhancement in prog MV45AFZB & user exit userexit_source_determination.
YOu can maintain the coding at same place.
thank you
Anirudh

Automatic storage location determination based on delivery document type

Dear All,
How can automatic storage location will be determined based on sales order type or delivery type.
Ex: If the business sells the material storage location automatically determined as SL12.
If the customer returnns the material storage location should be SL01.
Please suggest for retun process automatic storage location determination.
Best regards,
Ramesh

Dear Guru Lakshmipathy,
Fine, but we have some picking rules are MALA, RETA and MARE.
Currently we have onle on plant 1010 and shipping point 1010.
storage location for outbound deliveries determined based on MALA rule has been assigned to LF.
can we use RETA or MARE to determine the storage location for returns delivery. If yes kindly
explain. And where is storage condtion available in sap.
Best regards,
Thanks

Storage location determination at Sales Order

Dear All,
Could we storage location determine at sales order level ?
As per my requirement. Stock is available a particular plant example below
Plant
Storage Loc
Stock Available
Batch
1305
1300
10
1000190
1305
1300
10
1000890
Got order from customer is 15 Quantities and the sale order is confirmed because stock is available but at the time of delivery storage location is determined on the particular material so batch is picked automatically on base quantity other other is showing open. So could u plz give me solution for storage location determination on sales order level.
Thank You!
Chakradhara

Being an old member of the forum, I dont want to highlight the importance of adhering to forum rules. This topic has been discussed many times here and if you search in SCN or Google it, you would accept this has been discussed many times. Please adhere to forum rules and avoid posting such repeated queries.
G. Lakshmipathi

Situation in Storage Location Determination

Hai,
I have a scenario where I have to determine a different storage location based on the sales doc type. On searching the forum here I learnt that I should use USER EXIT to achieve this.
I want to know whether I can use situations to handle this scenario.
I am able to define situations. But where can I assign these situations? In SO or Delivery document?
Will be thankful if anybody helps me out in this issue regarding the 'situation'
Regards,
Maheshwaran. I

Hi
Storage Locations are Determined in the delivery document based on The priority rules like MALA or RETA or MARE
Here the RETA rule is Storage Location Determination determination based on shipping pt + delivering plant and Situation
The difference between MALA and RETA is these two are same (shipping pt + delivering plant)
MALA uses storage conditions as the third factor
RETA uses situation as the third factor
RETA is used in trading scenario
But both of these are used or assigned to delivery types only via t code OVLQ
So using situation will not help you to Determine Storage Location in sales doc type
Storage location is normally not determined in sales order
It is determined only in delivery
If you want storage location to be determined for sales order then you have to use user exit
If storage location is specified manually in sales order then it is copied into delivery
Otherwise it is determined using either MALA,RETA or MARE rules which we specify in delivery doc type
For sales order you have to use usetr exit in program MV45AFZZ
To determine storage location in Sale Order, there is no configuration available and it has to be achieved using exit USEREXIT_SOURCE_DETERMINATION in program MV45AFZB.
Maintain a zee table with the values based on which you want the storage location determination to happen. In the exit ask your abaper to write the code to pick up the relevant records based on the criterion and then fetch the storage location. This way storage location will be automatically populated in the sale order.
You can try incompletion procedure option
Put the storage location field in the sales order item incompletion procedure
Regards
Raja

User exit for storage location determination in sales order

Hi SAP SD Experts,
Please give me the exact user exit name where we can use for the automatic storage location determination in the sales order.
Thanks & Regards,
Rajesh Kumar Raju,

Dear Rajesh Kumar Raju
Go to IMG-->Logistics Execution >Shipping> Picking -->Determine Picking Location -->Define Rules for Picking Location Determination. There you have to assign the MALA rule to your delivery type
Also maintain in OMJ8 and in material master under MRP2 view the default storage location in the field "Prod. stor. location"
thanks
G. Lakshmipathi

Shipping point and storage location determination

for one of my delivery type i had defined shipping point determination as per following.
define shipping conditions
define loading group
assign shipping points: with combination of shipping conditionsloading groupplantprop shippping pointmanual shiping point.
i also checked the cmr and mmr both are correct.still system is not proposing shipping point and storage locatgion in my obd

Hi Charan
Shipping conditions is taken from sold to party
Pls check whether you are using a different SP and SH
Check in these t codes
In OVL2 are you seeing the shipping pt determination for your combination?
In OVL3 are you seeing the storage location determination for your combination?
If yes then shipping pt will be definately picked up in sales order
Storage location will be definately picked up in the delivery if you have assigned the rule MALA in OVLK
Have you assigned your delivering plant to your shipping pt in enterprise structure assignment?
This also check
Refresh the whole order and try again
If need be log out of SAP and relog and see provided you have youR OVL2 and OVL3 correct?
Note If shipping conditions are assigned to your order type in VOV8 then that will have priority over the shipping conditions of SP
So for that combination you should maintain shipping pt in OVL2
Regards
Raja

SHIPPING POINT AND STORAGE LOCATION DETERMINATION IN DELIVERY

i made configuration setting for shipping point and storage location determination during delivery process. still system is not proposing this data during delivery.
due to this reason lot of time is consuming during delivery creation.
plz suggest the complete configuration flow for this determination.

Dear Ram,
Can you please specify the configuration that you have made? And which storage location determination rule are you using for your Delivery Type?
Regards,
Amitabha

Storage location-determination of return-deliveries (delivery type RL)

Is there a difference between picking storage location-determination of return-deliveries (delivery type u201CRL Returns (pur.ord.)u201D/return to vendor) on 4.6C compared to ECC6.0? Is there a SAP-note?
Within 4.6C-system the storage location is determined based on the customizing settings (Logistics Execution \ Shipping \ Picking \ Determine Picking Location \Assign Picking Locations).
Within ECC6.0-system the storage location in the return-delivery is always the storage location that is entered in the Return-Purchase Order. It seems like the customizing-settings are no longer beeing taken into account.

This storace location-determination of return-deliveries (delivery type RL) in customozing that you mention is only true within the 4.6C-system. Within the ECC6.0-system the storage lcoation is always the one that is entered in the return-purchase order. In ECC6.0 the customizing settings you are refering to a no longer valid for deliveries with delivery type RL.
The questions is why/ and is there an OSS note.

Storage Location Determination rule

Hi Gurus
Please i want to add a new storage location determination rule (ZALA) to the existing MALA, RETA & MARE. I'll appreciate if you can give me the menu path.
Many thanks, Felix

Hello Felix,
Please refer to SAP Note 124041 regarding the user exit for storage location. The function EXIT_SAPLV02V_002 is called by the function SD_STORAGE_LOCATION_DETERMINE.
Userexit EXIT_SAPLV02V_002 should always be called under the following
conditions:
a) there is no storage location present in the preceeding document
b) the delivery item is in creation (not change)
c) the rule for the for the storage location determination is not a
standard one (transaction OVLQ).
In addition I would also suggest you to go through SAP Note 396480.
Hope this helps.

Situation in Storage Location Determination with Situation?

where can I use the situation values to determine the Storage Location?
In other words, how can I determine the Storage Location with the settings in Storage Location Determination with Situation?

Dear Huanzhiyu,
Go through this IMG path you can able to define the situations as well as you can able to determine the storage location with the situation.
IMG>Logistics Execution>Shipping>Picking>determine picking location-->Define situations and Storage location determination with situation.
I hope it will help you
Regards,
Murali.

Storage location determination at UD level

Hi ASAP,
Hope you must be doing great.
I wanted to determine storage location of material automatically at UD level.
It is working fine for movt. type 101/321 but for 103/105 system is not able to pick storage location of material automatically at UD level.
Please let me know where what config. is require.
Thanks & Regards
Manoj Singh

Hi
Check if this can be handled in Wearhouse management --> Invent. managent --> Define storage location control
Hope this works

Automatic Storage Location determination based on Customer in SO Creation

Hi Guru,
We have the scenario where some customer goods need to be out from the bonded WH, and Some customer will always take the goods from General WH, can i know if there is a way to maintain the default storage location based on which customer?
Thank you very much,
Regards,
Chee Wee

Dear Chee Wee,
First, Storage location will not be defaulted in Sales order with std system settings. Still if you want to automate storage location , you have to use exist.
Include: MV45AFZB
Form Exit: USEREXIT_CHECK_VBAP
Based on Customer you can bypass sales process ( whether goods can procure externally or produce internally),
but not default the storage location based on Customer.
Regards,
Reazuddin MD

Storage location determination Automatically while doing UD level

Similar Messages

Maybe you are looking for