Storage location exclusion from MRP run

Dear Experts,
please how do i exclude a particular storage location from being considered in MRP Run? and from which table(s) can I get the list of open production orders

Dear Vincent,
in OMIR you can exclude particular storage location. input values as 1
MRP - 4 view For storage location option input value as 1
in MMSC - same input value as 1
For your scond query what exactly you mean be open Prd orders
You can get all details in COOIS by inputting system status
Regards
Madhu

Similar Messages

Storage location exclusion from planning run

Hi All
I have excluded material from planning run by putting storage location exclusion indicator in MMSC for material.
Iam using kanban replenishment.
In material master, production storage location is same as that of put in MMSC.
I have created Planned independent requirement in MD61, when i do MRP system created planned order.
Please inform if storage location is excluded from MRP in MMSC then why system is considering requirement for that material at that storage location.

Hi Krishna
Please read help for Storage location MRP indicator
Storage location MRP indicator
Indicator that you use to exclude storage locations from material requirements planning at plant level.
If you do not set this indicator, stock, requirements, and receipts are included in MRP at plant level.
Use
You can exclude storage locations from MRP at plant level in one of two ways:
By excluding storage location stock from MRP
If storage location stock is excluded from MRP at plant level, no receipts for this storage location will be created in the planning run.
By planning storage location stock separately
If storage location stock is planned separately, the storage location is replenished with goods if the stock falls below the reorder point.

Storage Location exclusion from MRP problem

Hi all,
I have added some Storage locations to exclude from MRP, via SPRO cust.
(Production>MRP>Planning>Define st. loc. MRP per Plant)
However, when I want to verify it, I go into MD04 and for a material, the excluded storage loc. lis does not show up in the end.
What additional cust. do I have to do?
Thanks,
Screens:
https://picasaweb.google.com/koray.tulumen/Paylasacaklarim

Hello,
To exclude the storage location from MRP Run
Check the following settings:
1.In OMIR you can exclude particular storage location. input values as 1
2.MRP - 4 view For storage location option input value as 1
3.in MMSC - same input value as 1
Hope the iformation is useful
Regards

Storage location exclude from MRP execution

Hi,
I want know how to exclude any particular storage location from MRP execution .
For example,
1.     ABC is FERT material.
2.     BOM of ABC is consisting of RM & PM material.
3.      There are two storage location
             a.            Central Godown
              b.            Shop Floor Godown
4.     Stock of shop floor does not want to consider in MRP calculation.
I have set from t-code OMRI storage location MRP indicator as u2018 1 u2018 . But this is not solved our purpose.
Please let me know me how to solve the problem.
Regards,
Amit Biswas

In responce to reply ,
Reply to first SAP user,
1. Activate mrp for mrp area OM01
2. Define MRP area OMIZ
This is not clear to me. If you kindly elaborately explain then it will be helpful for me.
Reply to Mr. Himanshu,
I have already done through OMRI but this is not solved my purpose.
Reply to Mr. Akil
In your cases, in every material mrp indication has to be set.
My objective: through standard configuration, entire material will be excluded u201C particular storage location u201C on MRP execution.
Please let me know your valueable guidance.
Regards,
Amit Biswas

How can I include the minimum stock of storage location in the mrp run.

Hi all,
I have in plant 1030 storage location 1001 and 1006.
MRP1 Lot Size = EX
           MRP type = PD
           Reorder Point = 5
MRP2 Safety Stock = 5
MRP4 for 1001 is not filled
MRP4 for 1006 Sloc MRP Ind = 2
                         Reorder point = 2
                         Replenishment qty = 3
If no stock and I run the mrp I get
a PurRqs for 8 with a automatic MtlRes of 3 going to storage loc 1006
If I create a reservation in 1006 for 10 units and run the MRP again
a PurRqs for 15 with a MtlRes of 10 going to storage loc 1006.
I want the result to be PurRqs for 18 with a MtlRes of 13 going to storage loc 1006.
10 for the reservation and 3 to fill storage loc 1006 with the replenishment qty.
How can I acheive this?
Best Regards!
Curtis

Hello Curtins
Please observe what is stated on question 6 of FAQ note 550954, regarding storage locations planned separately:
6. Question:
    A storage location should be planned separately. Is it possible to
    consider external requirements?
    Answer:
    No. The storage location MRP is a very simple reorder point planning
    procedure, during which only reorder point and replenishment
    quantity are defined. More complex settings can be implemented via
    storage location MRP areas.
Therefore, I'd suggest you to use MRP areas to map this scenario.
Best Regards
Caetano Almeida

Storage location consideration during MRP Run

Hi All,
Within a company code, i am having 2 plants namely PS12 & PS13. In plant PS12, i am three storage locations namely 1201, 1202,1203. Similarly in plant PS13, i am having stores 1301,1302,1303.
During MRP run, i do not want to consider the stock in all the storage locations of PS12. The storage location 1203 to be exclued during MRP run. How to set this?
Your input will be appreciated very much,
Thanks
Kumar

Hi Kumar,
Goto SPRO>Production>Planning>Define Storage Location MRP per plant, add the storage location to be ignored during MRP and select indicator '1' against it. Thereafter, all the materials created with this storage location will be defaulted with value '1' in the field 'SLoc MRP indicator'. However this can be modified later if required.
For existing materials, select indicator '1' in the field 'SLoc MRP indicator' avaialble in MRP view under the column 'Storage location MRP'. Go for a mass update for a huge list of materials.
Check this and revert for any clarifications.
Regards,
Murali

Excluding storage location from MRP run in Long Term Planning

Hi,friends,
In my scenario , i want to exclude storage location from MRP run in long term planning.When i set storage location MRP indicator "2" in SPRO and SLoc MRP indicator "1" MRP4 in material master, i can exclude the storage location after run MRP with MD01/MD02,and i can see the expected result in MD04.But in Long Term Planning scenario the storage location can not be excluded after run MRP with MS01/MS02,and the requirements list in MS04 include the stock in the storage location i want to exclude. i dont know if i miss something.Plz give me some advice.
Regards
Joey

Hi,
Refer the OSS Note 208017 - LTP: Long-term planning and storage locations
==========================================================================
Symptom
In long-term planning (Transactions MSBT / MS01 / MS02 / MS03), the MRP indicator of a storage location for a material is not taken into account (material master, view MRP 2 [up to and including Release 3.1I] or MRP 4 [as of Release 4.0A]).
The storage locations excluded by MRP or planned separately are also planned in the plant segment.
Additional key words
LTP, MM01, MM02, MM03, master data, MRP indicator, LGORT ...
Cause and prerequisites
The MRP indicator for a certain storage location of a material is only taken into account in operative planning (requirements planning, MRP).
The long-term planning occurs exclusively at plant level.
Solution
This is no error. The system works as intended.
The individual storage locations should not be distinguished in the long-term planning, in order to perform a comprehensive long-term planning.
This is important, for example, within the kanban processing where the storage locations with kanban MRP are excluded from the MRP, but in spite of that should be included in the long-term planning.
==========================================================================
Regards,
Siva

Storage location to be excluded from MRP Run

Dear Gurus ,
We are trying to exclude perticular Storage location from MRP Run with the Configuration setting
IMG >>> Production >>>.MRP >>>.Planning >>>>.Define Storage Location MRP per plant >>>> Indicator 1 is set
Still the Stock is being considered
As I know this can be done thr' MRP4 view , but we don't want to go Part No wise ,
Suggest better sloution
Thanx in advance

Vasu,
Above IMG path is only used for defulting the storage location exclusion in material master.
Whenever materials are extended to this storage nlocation in mm01 or mmsc, this defult value would be proposed automatically .
However this does not mean setting it in IMG would change existing materia storage location extensions automatically. Also MRP will not pick from above IMG settings.
Once again above setting is only valid from defulting the values while extending the Materials to storage locations.
Hope it helps.

How to exempt a storage location from MRP run

Hi all,
How do I exempt a storage location and all its materials from MRP run.
I am creating a new storage location and this should not be considered for MRP and no idoc should be generated if a purchase order or a delivery is created from this storage location( should we stop entering this storage location in BD64 filters or anything more to prevent triggering of the idoc).
Can somebody please through some light on these issues.
Kind Regards
Chakradhar
<REMOVED>

Hi
You need to set up master data for that material.In Mrp-4 View set storage location indicator as 1(one) .In this case your storage location stock will be exclude from MRP .
Hope this will help
Dilip

Exclusion of Stock Transport specific MRP Elements from MRP Run

Hi,
How can we exclude specific MRP Elements from planning?
I want to exclude the MRP elements like - Ord.DS, PRqRel, PlORel etc from MRP run.
(After MRP run, they should only be displayed in MD04 and not planned)
MRP run should treat all other MRP elements normally.
Warm Regards,
Madhavi.

I think I understand what you want to do, and I think it is not possible without some major MODIFICATIONS, because it goes against the grain of what MRP is supposed to do: balance demand and supply.
One thing you might consider as a possible work-around: create a "virtual plant" say 5000, that is a plant that isn't really used for anything. Then point your special procurement keys in plant 2000 to plant 5000. This is where you then get the purchase req releases etc, and they will not affect plant 1000.
This doesn't require modifications... but it will also not display the elements in MD04 for plant 1000.
Just an idea...

MRP-Exclude STO document type from MRP Run

Hi,
I want to exclude STO document type from MRP run, so that STO Open qty will not be considered as open qty while doing MRP.
I have checked below settings but didn't worked.
1. In OMI8 - I have unchecked "Stock in Transfer"
2. SPRO->Materials Management->Consumption-based Planning->Planning->Define torage Location MRP per plant
     Here I have excluded ONE storage location from MRP and same storage location has been used in the STO.
Can anyone know how to resolve this ?
Regards,
Rakesh

Rakesh,
Yes, they will not be relevant for MRP. Neither will anything else in that storage location. However, the setting is not in configuration, but in the material master (MRP4 tab).
The configuration setting you mentioned has no impact on existing material masters, it is only used to determine the default settings for newly created storage location entries for a material/plant..
You can set a particular material/plant/stlocn to be irrelevant for MRP. This relevancy is irrespective of document type, it can be a STO, a purchase req, a sales order, a production order, or it could be stock (inventory) - all supply and demand in this material/plant/stlocn are excluded from MRP processing.
MRP relevancy of storage location is set at the material/plant/storage location level in the material master.
If you do not wish to exclude a storage location from MRP, then you will have to find another way to make your STOs Irrelevant for MRP. As I said earlier, STOs (like any other Purchase orders that are configured to process stock ), are generally considered to be relevant for MRP.
If you were a client, I would suggest that you rethink your business model that drives this requirement.
If the business model cannot be altered, and the storage location solution is unacceptable, then you will be stuck with a customized solution.
Best Regards,
DB49

Number Range for PR converted from MRP Run

Dear Experts,
We are experiencing problems with our number range when converting our MRP generated planned orders into PRs. We convert planned orders to purchase requisitions using MD03. We have 1 Plant with 2 MRP Groups which assigned to specific document types and number ranges as well. For example:
In T-code OMI8:
Plant AAAA --> Number Range 1111111111
(Because 1 Plant only able to have 1 number ranges)
In T-code OPPZ:
Plant AAAA, MRP Group : A01--> PR Document Type : ZZZZ
Plant AAAA, MRP Group : A02 --> PR Document Type : XXXX
In T-code SPRO "PR Document Types" and "PR Document Ranges"
PR Document Type : ZZZZ --> Number Ranges 1111111111
PR Document Type : XXXX --> Number Ranges 2222222222
When I run MD03, the result is:
MRP Group : A01 --> PR Document Type : ZZZZ --> Number Ranges : 1111111111
MRP Group : A02 --> PR Document Type : XXXX --> Number Ranges : 1111111111 (Why the number ranges is not 2222222222 ???????)
Does anyone have idea? Please help. Thanks a lot..

Hi Mallinath,
thanks for your info.
Note 46919 has been implemented in the system, and also i have maintain Tcode - OMI3:
* Object Type : 2 (PR) --> PR Document Type : ZZZZ --> Internal number range : 1111111111 --> external number range : " " (blank) --> Reservations : 01
* Object Type : 2 (PR) --> PR Document Type : XXXX--> Internal number range : 2222222222 --> external number range : " " (blank) --> Reservations : 01
But still system pick wrong number ranges (1111111111, instead of 2222222222 ) for PR Document Type XXXX if generated from MRP run.
Do you have any other idea? Thank you.

How to exclude the manually create SAP PO from MRP Run?

Dear all
There is this situation that due to the long procurement lead time, certain PO is created manually in SAP in advance based on the sales order enquiry made by customer. (In normal case, we will create a sales order in SAP and then run MRP to create PR to converted to PO)
Most of the time, customer will confirm their enquiry so that we can create sales Order in SAP and this will make it just in time for our raw material to arrive. However, when the PO is created in advance without triggered by MRP caused by Sales Order, this PO booked quantity is often taken up by the consideration of MRP RUN by other sales order. And if later customer confirms their enquiry and there is no PO stock for this due to this stock is already considered by other sales order.
Is there a way that I can exclude the manually create SAP PO from MRP Run?
Please advise.

Dear Csaba Szommer
Thanks for your reply.
Sorry for confusing you.
1. We are in a MAKE TO ORDER (MTO) environment.
2. There is this situation that due to the long procurement lead time, certain PO is created manually in SAP in advance based on
    the sales order enquiry made by customer. (In normal case, we will create a sales order in SAP and then run MRP to create
    PR to converted to PO).
3. Most of the time, customer ABCwill confirm their enquiry so that we can create sales Order in SAP and this will make it just in
    time for our raw material to arrive.
4. However, for the PO that is created in advance (not created by PR triggered by MRP caused by Sales Order), this PO
    On Order Quantity is often taken up by the consideration of MRP RUN by other sales orders.
5. It creates problem that if later this customer ABC confirms his enquiry and we create SAP Sales Order in the system, the
    stock of PO created previously is already eaten up by other sales orders.
We are using MTO and do not use Forecast. And MTO Strategy is set at the material master level and as such I do not think we can simply modify the MRP Strategy to suit this unique case, as for the very same material, in one PO it should be considered by MRP but in another PO, it should be excluded from MRP Run.
Is there a way that I can exclude the manually create SAP PO (for the case of Customer ABC email enquiry without creating Sales Order in the System first) from MRP Run?

Excluding PO from MRP Run

Dear All,
I have one requirement that i want to exclude one PO document type( Developements PO) From MRP Run. How can i do this.
Kindly Help
Regards
Sunil

Hi,
My scenario is that when a new vendor is developed for Procurement of a existing material then at first Developement Purchase Order is raised against that vendor. After finalisation of vendor standard PO is raised against that vendor. For a material which is being Procured from some vendor there will be Regular Purchase Order, now i need more vendor for that Material then I will raise Developement PO against those vendor, then on Finalisation of vendor i will start raising regular PO for that vendor. In MRP run this Developement PO quantity should not be considered as receipt element
Regards
Sunil

Differentiation between PRs' Coming from MRP Run & Reservations

Hi,
How can we differntiate that a PR is coming from MRP Run (If quantity falles below ROP) and Reservation (If Max is 2 and reserved is 4)
Appreciate your responses
Regards,
Talha

Hi,
I didnt get the second part of the question...could you please elaborate.
The PR creation indicator will be in PR - item level - contact person tab as shown below.
Regards,
AKPT

Storage location exclusion from MRP run

Similar Messages

Maybe you are looking for