Storage location extension for Blocked and Quality inspection stocks
Hi All,
Could any one explain how to extend a Storage location (which is actually maintained for the Returns) to make use for the Blocked and Quality inspection stocks. Does this require any config settings.
Thanks in advance.
Kalyan
Hi,
Thanks for the Reply.
Let me be more clear,in describing my requirement. Actually the present Storage location is maintained for only Returns. But in addition to this I require to make use of this storage location for the purpose of the maintianing Blocked Stock or QI stock.
Therfore to achieve above what are necessary steps or do i need to maintain any config settings for this.
Thank You,
Kalyan.
Similar Messages
-
Create storage location automatically for movement type 261
Hi Experts,
Currently we're inprocess of implementing "create storage location automatically" for reservation, and I've done with the configuration for both reservation side (Define Default Values) and movement type side (GI/transfer posting - Create Storage Location Automatically).
For movement type 201, new storage location successfully extended/created using T-Code MB21 (Create Reservation). But we found an error message while conducting the same thing for movement type 261 (which only can be created using T-Code IW31 (Create material reservation form Work Order).
Did we missed any required configuration? Pls kindly advice on what we should do.
Thanks a lot. Really appreciate the prompt response.
Rgds,
MDHere's the current situation,
We configured the plant/storage view (SPRO), most of materials already extended to desired plant and storage location. Commonly, we can extend or create any materials for certain plant and/or storage location by maitain material master data (using T-Code MM01).
Recently, we develop the additional configuration to activate "automatic create storage location" for reservation, aligning with the movement type for Goods Issue (201,221,261,301,etc).
Let's say we have material number 123456789 and currently assigned to plant YYYY, but not extended to storage location XXXX. By performing T-Code MB21 (create reservation) with movement type 201 inputted, the respective material (123456789) is automatically created for the XXXX storage location.
But the above condition is not effected while performing the same thing using T-Code IW31 (create material reservation via Work Order) with movement type 261 (GI for Order).
Any idea to perform create storage location automatically while creating reservation for movement type 261? is there any possible configuration or procedure to be added?
Thank you -
Goods receipts blocked stock and quality inspection
Hi,
we want to create an inspection lot for an initial sample automatically as the goods receipts is posted. At the same time we don't want the amount to appear in the normal quality inspection stock or in the normal blocked stock but instead it should be posted in the goods receipt blocked stock.
Is it possible to post it automatically to the goods receipts blocked stock?
Is it possible to create an inspection lot automatically for this?
Thanks,
Marcus.This isn't something that is straight forward, like just running a report.
You have to look at the field QALS-LMENGEZUB which is the quantity to be posted of he inspection lot. Keeping in mind that you can have multiple inspection lots for the same batch, you'd have to get all qals records for the batch you are interested in.
You then have to compare all the related MCHB records for the material and ln that table sum all the values in field CINSM.
That should show you any inconsistencies between the MM and QM.
I am assuming this is for batch managed, non-HU managed materials.
If not, let me know and we'll take another crack at it.
FF -
Automatic batch determination for quality inspection stock
Hello, gurus.
Could you please, help me with the following problem: I have received on the certain storage location some quantity of material maintained in batches into quality inspection stock with 501 movement type. Now I would like to make reverse posting, but I do not want to use cancellation of the document, I need to use 502 movement type and determine batch from quality inspection stock with automatic batch determination in MIGO transaction. I assigned Batch search procedure to 502 movement type and created all necessary condition records. I use Checking Group for Availability Check CH and Checking Rule for Availability Check 03 where I include quality inspection stock. However no batch can be determined. But if I use 331 movement type, everything is OK, the batch is determined without any problems. If I manually put batch and valuation type for the material, the system shows no error.
Why it is not possible to do automatic batch determination for quality inspection stock then?OK, let us talk abou it. I check it in my system, actually 502 can work, but I can't trigger BM determination by 501. Maybe BM determination onlys to select some existing batches for consumption. For 501 in my pratice I can select all the existing batches to be added or just add a new batch.
-
Delivery is accepting material in Blocked & quality inspection stock
Hi Experts,
During delivery ( VL01N) the system asks for Serial Nos for the delivered Material and serial Nos are assigned by going to Extras--> serial Nos. and PGI is completed
In this process the system could able to take the serial Nos that are in Blocked (07)or Quality (02) state also apart from the Unrestricted Use.
How can we restrict the system to prevent selecting the stock/material apart apart from 01 state ( i.e unrestricted use)
Regds
RajivYou have customize that availability check which runs behind delivery to check what are the stock available.
You have to make sure u unchecked the quality inspection stock and blocked stock
thanks -
Quality inspection stock payment block
Hi All,
I want to block the payment for the materials which comes to quality inspection stock in MIGO as I have maintained in Material Master purchasing view post to quality inspection tick.
I want payment to the vendor only after the stock goes from quality to unrestricted use .Is there any way achieving it ?
Regards
Abhijit DasDear,
Please try this in transaction OQB1 and Change the QM control key used in the QM view for the material.
Or use SPRO > Quality Management > QM in Logistics > QM in procurement > Define Control key path.
In the details of the key, set the Invoice Block indicator as well as whether it should be a warning message or an error message.
Regards,
Syed Hussain. -
Non stock material and quality inspection
Hi All,
We are using a material short text for a material procurement. System allows me to post the goods receipt with mvt type 101 into quality inspection stock.
However once posted to QI stock, we can not enter 321 movement with reference to GR document.
But i can enter rejection for full or partial quantity using movement type 122,with reference to GR document.
Can any one suggest the method to transfer the stock from QI stock to consumption. SAP doesnot allow consumption from QI stock. How to handle the process.
PrashantHi,
When you do GR at that time only system books the consumption of material quantity and value immediately. Since there is not any material master (Material text purchase)
The quality lot generated is for keeping the record of the materials Usage Decision and Result Recording and to generate the COA. It is not related with Stock Posting since there is not any stock after GR. -
Storage location updation for account assigned PO
Hi All,
Our requirement is that for an internal order assigned and subcontracting PO (Account assignment-F & item category-L) we want to create outbound deliveries for which we need to have stock in storage location after doing GR.
But, I found that for the some of these kinds of POs while doing GR though MIGO system is updating storage location but for some POs it's not.
Can you please suggest what should be the reason for this?Hi Jurgen,
Thanks for your reply.
You are correct. As per my knowledge also if there is account assigned PO then system will not update SL.
But, I have one PO for internal order assigned (Acct Aggt Cat-F) but for this SL got updated.
Can you tell me what setting should be there to facilitate this? -
Backflush Semifinished product and stock post to quality inspection stock
Dear Experts,
Please advise is it possible for the below in SAP. How to do?
When backflush "Semifinished product", system automatically post to quality inspection stock. Then it is skip for 9 lots. The 11th lot again post to quality inspection stock.
1st backflush posting -> post to quality inspection stock
2nd until 10th backflush posting -> post to unrestricted stock (skip)
11th backflush posting -> post to quality inspection stock
Thanks.
Regards,
WongDear Experts,
Let me further explain what I want.
Production people produce semifinished product, but quality inspection people not inspect all the product. For example they will inspect 1st and 11th batch of product only.
So I propose when backflush the semifinished product, system post the stock to quality inspection stock. Then production people know this batch of product need to be inspected and pass to quality inspection people. Once quality inspection people complete the inspection, they will release the material (UD) to unrestricted stock.
I have no idea on how to configure and maybe it is not possible in SAP. Please advise.
Question: Is it we should manually create inspection lot for each transaction (eg. backflush or material movement)?
Thanks in advance.
Regards,
Wong -
SC 0011008450M7 503 No storage location data for 544_0612_13 in gm01 gm01
Hi All ,
After the creating a Reservation shopping cart for the inventory material , there is no follow on document (Reservation)is created for the shopping cart. when we view the SC it is showing the message :Contains errors. when i gone and checked in the RZ20 it is giving the error as below
Shopping cart 0011008450 (Res. 0041001082): M7 503 No storage location data for 522_0602_10 in gm01 gm01.
We maintained the all the view for this material in material master (MM03).
Please hlep.
Regards
Channappa SajjanarHi,
1)Please check for user's extended attribute is assigned with correct storage location.
2) while creation of the SC, under basic data tab, correct storage location must be populated.
Regards
Bhupendra -
Quality inspection stock for scrapping
Hello SAP expert,
In MMBE there are 2800 PC in the Quality inspection SLoc 1005.We want to scrap those 2800 PC. We want to do this with MB1A, movement type 551 or 554. With movement type 551, the quantity must be transferred to unrestricted. For movement type 554, we can scrap directly from SLoc 1005.
When trying to do this, the error "Change the inspection lot stock of material 10009021in QM only" is shown. The person of the Quality department checked the inspection lots and canu2019t find something. So we donu2019t know where to look for this anymore.
Can you please help?
Thanks
RyanHello,
I have noticed that they use MB1A, and with movement 551 (withdrawal for scrapping) and they said the stock will be transfer to UNRESTRICTED, then they do 554 movement (withdrawal for scrapping from quality inspection - reversal) which i think is a wrong process?
they can use movement 553 (withdrawal for scrapping from quality inspection) am i correct? to achieve they desired. and plus where can i find when i achieve to scrap the QI stock? where i can may the proof that the QI stock was scrap? in what tcode can i find this scrap number of material i done?
Thanks
Ryan -
What are the settings for rework order quality inspection
HI,
Iam doing production order confirmation at the GR time some oprations are rejected.that operations i want too rework order CO07 process without GR ,i want to Quality inspection in REWork order.
What are the settings for rework order Quality inspection?Refer beautiful document
http://wiki.sdn.sap.com/wiki/display/HOME/ReworkInProduction -
For block and unblock date .
Hi All,
In me22n for standard PO there are 2 Lock icons under Header details,
In my Report the user wants that Lock icons details to be appeared in output. (ie) for block and unblock date .....
Kindly suggest me how to do it .....
Your Valuable answers will be rewarded .
Regards,
Vinoth.Hi Paras
Try as below:
data: l_lock type ICON_D value '@06@',
l_ulock type ICON_D value '@07@'.
write:/ l_lock as icon,
/ l_ulock as icon.
Kind Regards
Eswar -
Revision: 17565
Revision: 17565
Author: [email protected]
Date: 2010-09-02 17:30:08 -0700 (Thu, 02 Sep 2010)
Log Message:
Fix FM-937: ProxyElement dispatches trait events for blocked and overridden traits. Add unit test.
Ticket Links:
http://bugs.adobe.com/jira/browse/FM-937
Modified Paths:
osmf/trunk/framework/OSMF/org/osmf/elements/ProxyElement.as
osmf/trunk/framework/OSMFTest/org/osmf/elements/TestProxyElement.as -
User moved Quality inspection stock from sloc 290 to 295 via Migo_tr(311)
Issue -User moved Quality inspection stock from storage location 290 to 295 (no Quality) via Migo_TR(311)
Now they want the "Q" status to be reflected under storage location 295 ,pls help how it can be done.
Background- RMA processing was correctly performed for this stock .from RMA # >inbound delivery >PGR >create & confirm TO>QA11 >LU04 and LT12 that bring the stock to storage loc 290Explore mvt type " 323 " Transfer posting quality to quality within plant
Maybe you are looking for
-
Maps app button has disappeared?
Hello, I hope there is someone out there that may be able to help? I have a new iphone and the maps app button has disappeared? When i search the phone, i can find maps and it works fine, but how do i get my little button back on my screen. (yes i've
-
Concurrent Manager(s) stop working suddenly
Hello friends; We are having a problem on production server, today the concurrent managers suddenly stopped working. We restarted them and log file came with following errors: Found dead process: spid=(18790), cpid=(1734302), ORA pid=(27), manager=(8
-
Dear all, i'm facing a PDF error when sending mail, i figure that PDF attachment can't be more than 100 pages. is that correct? below is the error message when open ADOBE, this won't happen when pages in adobe less than 100. "Adobe Reader could not o
-
Qustion about the Audigy 2 ZS internal dr
<FONT color=#6666ff size=5>I am a neat freak when it comes to my computer please all about air flow. Will i just got the Audigy 2 ZS platinum i was wondering if i could just use a Rounded IDE Single Device Cable. Also this sound card is great.
-
My most recent pictures on my Iphone 5 aren't going to my photo stream or the cloud. Help, please