Storage Location field mandatory for Movement Type 103

Hi , We are using movement type 103 and 105 to receive material.
Here we want to make storage location mandatory for movement type 103.
How can we do that.
Regards
SHREY

Thx for all yr replies ....
I do agree with yr statements ....
103 doesn't update inventory at storage location level therefore it doesn't make sense to have storage location at the time of 103.
But at our end , we are using 103 for MIGO data entry by store user and 105 for MIGO approval .Store users are the right person who are enter correct storage location to which material should go.Therefore looking for a way thru which store user can enter storage lcoation at the time of 103 only.
Since approvers or purchaser are not very sure about the correct storage lcoation to which material should move therefore storage location at PO level or 105 level will not help me.
Any work around ??
Regards
Shreyh

Similar Messages

  • Storage location field mandatory in PR

    Hi ,
    We want to make "Storage location" field mandatory in PR for  "_Document Type and Account Assignment" Combination._
    Like we have a PR document Type ZDM for raise a PR for materials, we want to make STORAGE LOCATION field mandatory if ACCOUNT Assignment in line item is BLANK.
    In case Account assignment is K then this field should be NON-MANDATORY and preferrably should be greyed out.
    Is there is any standard SAP settings for that
    Regards
    Shrey

    Hi,
    Use the user exit -> MEREQ001
    Hope the above helps.
    Regards,
    Vivek

  • Making Storage Location field mandatory in Work Order

    Hi
    As per our proces, if PR is created from work order and if there is no storage location in work order then PO will have warehouse address as a shipping address. So it is expected that PR must have storage location details when it is created from work order to avoid incorrect shipping address in PO.
    So, I want to make storage location field mandatory in components tab of work order.
    Also I want to avoid the users to deliberately removing the storage location and making it blank.
    Regards
    Prakash

    Hi,
      You will have to use one of the below mentioned user exits  to accomplsih this requirement.
    CNEX0026 Maintenance order: General check for material
    CNEX0027 Maintenance order: Determination of plant or storage location for component
    Thanks
    Narasimhan

  • Field selection for movement type 601 account 894025 differs for cutomer

    While posting goods after saving delivery merror message
    Field selection for movement type 601/aact 894025 differs for customer goods movement
    I tried OMJJ>Mvtmt Type>601>Field selection enjoy>601  KONTO  Optional field
    Now this is only happening in the cases where I have assigned free goods Inclusive 10MT. If the order is less than 10MT (that is if no free goods attached) posting is accepted & billing & account determination is processed successfully.
    I am unable to identify the reason though I have worked a lot on MM/Fico on the system.
    Please provide your valued inputs why this is happening?
    Thanks for your time.
    Rajiv

    Hi Raja,
    Thanks for prompt reply.
    I shall appreciate if you elaborate how to check
    check the Field selection goup in control tab for that GL 
    I tried OBC$--> (Is this correct?)
    I checked cost center field G004 -->Addl Act assignemtn -->Cost center which is Optional entry. Should I check any other items on the screen as I am unable to understand which field is applicable on a/c field.
    Profit center, cost object are  in G004 as supressed field.
    So should I make optional? So thing will work.
    Other Q should I also consider G025 Inventory adjustment account? As per error this a/c is not shown. So pl advise me steps or heading which I should consider.
    Thanks for yr time.
    Rajiv

  • FIELD SELECTION FOR MOVEMENT TYPE AND ACCOUNT

    Hi,
           I am trying to do the Post Goods Issue (PGI).
    But, the system is throwing an error as mentioned below.
    Field Selection for Movement Type 901 / Account 4070000001 differs for Customer Goods Movement (015)
    I made the Cost Center as Required Entry. But, there was no effect on the PGI.
    I could not make out the exact error.
    Please guide me properly in this regard and do the needful.
    Thanks in advance.
    Thanks & Regards,
    Srinivasa M.S
    +91-9910077829

    Hi,
    On the Error message detail, system will guide you to the Configuration details for Field settings for Movement type & Account, please get in touch with your FI consultant, to make the Field selection for the account similr to that of your movement type, this is a very common issue.
    Regards
    Chandra Shekhar

  • Field Seletion for movement type  / acct differes for BA

    dear all
    while posting in MM the user is facing the problem and error message
    Field Seletion for movement type  / acct differes for BA
    please let me know if i can do some thing with Field status variant in FI
    I am not able to figure this out

    If you Run Program RM07CUFA in SE38 and compare movement  type  and GL you can see the
    comparison of the field status variant of the movement type and GL
    Hope this will resolve your issue
    Bilal

  • GR/GI Slip No Mandatory for Movement Type 101 and 102

    How to make 'GR/GI Slip No' mandatory in transaction 'MIGO' for only movement type 101 and 102.
    Regards,
    Piyush

    Which user exit?
    MB_CF001  Customer Function Exit in the Case of Updating a Mat. Doc.
    MBCF0002  Customer function exit: Segment text in material doc. item
    MBCF0005  Material document item for goods receipt/issue slip       
    MBCF0006  Customer function for WBS element                         
    MBCF0007  Customer function exit: Updating a reservation            
    MBCF0009  Filling the storage location field                        
    MBCF0010  Customer exit: Create reservation BAPI_RESERVATION_CREATE1
    MBCF0011  Read from RESB and RKPF for print list in  MB26           
    Please suggest.

  • Making storage location field mandatory at contract level

    Dear All,
    I want to make the field storage location mandatory at contract level.Is there any configuration setting to make storage location mandatory at the time of contarct creation.
    please suggest.
    thanks in advance
    ravi k

    sapuser k 
    1. IMG --> SD --> BF --> Log of Incomplete Terms --> Define Incompleteness procedure (Double Click)
    Choose "A - Sales Header", Click New Entries, Create say 55 -  Contracts
    Click "New Entries", Enter Table = VEDA, Choose Field (Storage Location Field ) and Status.
    Click Save
    2. IMG --> SD --> BF --> Log of Incomplete Terms --> Assign Incompleteness Procedure
    Assign Procedure to sales document Types
    WK1 = 55
    Then Click save
    Regards
    Sathya

  • Customize Header Test as Mandatory for Movement Type 350

    Dear colleagues,
    If inspection lot is rejected, i.e. stock is posted to blocked stock in transaction QA11, document header text must be mandatory.
    I have tried setting “Field Selection for MIGO” and “Goods Issue / Transfer Postings >Define Screen Layout” for movement type 350 but those didn’t work out
    Is there a solution without custom development?
    Regards
    Melih

    Doubtful.  There is a user exit to check the UD.  You might be able to use that to see if the text you want is populated. If not give the user a pop-up error box and don't allow the UD to be saved until the text is populated.
    A rejected characteristic can require text.  This is in the control indicators.  Maybe you can leverage that somehow.
    Craig

  • New Field addtion for movement types

    Hi Everyone,
    I want to add new field for movement type 301(vendor material no)can you please guide me how to accomplish this task.
    Thanks
    Venkat

    Dear,
    Do the 311 movement through the MIGO and then set field for MIGO
    Vendor Material No.     GOITEM-IDNLF
    Vendor Material No.     GOSEARCH_PO-IDNLF as highlited filed in OMJX
    Or else with MB1b you can use the text fiied for Vendor Material no.
    Hope it will solve ypur problem.
    Regards,
    R.Brahmankar

  • Field selection for movement type 561

    Hi Guru's,
    i want to add value field in the movement type 561 to while uploading the stock i can add the total quantity with total value, if i am wrong correct me, with detailed process.
    Regards,
    qsm sap

    Hi QSM SAP!
    The value of the stocks to be uploaded using MvT Type 561 can be placed in the External Amount in Local Currency Field. To show this field during goods receipt:
    SPRO - MM - IM and PI - Settings for Enjoy Transactions - Settings for MIGO - Field Selection per MvT Type - New Entries - (561 EXBWR) then set as either required or optional.
    Hope this helps! =)

  • Purchase order field optional for Movement type

    Hi SAP friends ,
    Please let me know the config path to make the purchase order field as optional for particular mvt types that are used in MIGO transaction to receive the overage stock or reversal of overage stock
    Regards,
    JR.

    Hi John,
    If your posting a 101 movement against a purchase order then there is probably no way of making the PO optional, as this is a designed process
    I guess I need to understand the process in more detail
    In the Interim please look at the following customising settings
    Materials management > Inventory management > Inventory management and PI > Field selection for for goods movement
    Materials management > Inventory management > Inventory management and PI > settings for enjoy transactions > fields for goods movements
    Regards
    Steve

  • Create storage location automatically for movement type 261

    Hi Experts,
    Currently we're inprocess of implementing "create storage location automatically" for reservation, and I've done with the configuration for both reservation side (Define Default Values) and movement type side (GI/transfer posting - Create Storage Location Automatically).
    For movement type 201, new storage location successfully extended/created using T-Code MB21 (Create Reservation). But we found an error message while conducting the same thing for movement type 261 (which only can be created using T-Code IW31 (Create material reservation form Work Order).
    Did we missed any required configuration? Pls kindly advice on what we should do.
    Thanks a lot. Really appreciate the prompt response.
    Rgds,
    MD

    Here's the current situation,
    We configured the plant/storage view (SPRO), most of materials already extended to desired plant and storage location. Commonly, we can extend or create any materials for certain plant and/or storage location by maitain material master data (using T-Code MM01).
    Recently, we develop the additional configuration to activate "automatic create storage location" for reservation, aligning with the movement type for Goods Issue (201,221,261,301,etc).
    Let's say we have material number 123456789 and currently assigned to plant YYYY, but not extended to storage location XXXX. By performing T-Code MB21 (create reservation) with movement type 201 inputted, the respective material (123456789) is automatically created for the XXXX storage location.
    But the above condition is not effected while performing the same thing using T-Code IW31 (create material reservation via Work Order) with movement type 261 (GI for Order).
    Any idea to perform create storage location automatically while creating reservation for movement type 261? is there any possible configuration or procedure to be added?
    Thank you

  • Field Selection error for movement type and G/L account

    I am currently experiencing a field selection error between movement type 601 and G/L account 7140000.  The problem field is 'Segment'.  This field is set to required for the G/L account, but it is hidden for the movement type 601. This inconsistency causes an error when posting the goods movement. According to business requirement the field must be required for the G/L account, therefore we must make this field optional for the movement type.
    However, in configuration the field segment does not appear for the movement type 601. Therefore it can not be changed to optional.
    Does anyone know a workaround other than making this field optional for the G/L account because the business requirement is to have this field as required?????
    Many Thanks

    Hi,
    On the Error message detail, system will guide you to the Configuration details for Field settings for Movement type & Account, please get in touch with your FI consultant, to make the Field selection for the account similr to that of your movement type, this is a very common issue.
    Regards
    Chandra Shekhar

  • Priority field mandatory for planning plant-order type

    Hi
    Is there a standard way through configuration that I may contol priority field in order header to be mandatory for some order types only in one planning plant?
    Problem is that if I make the priority field mandatory for order type, it will be so for all the planning plants which i dont want. Also i dont want it to mandatory at planning plant level since there are many order types under one planning plant and requirement is to make priority field mandatory only for some order types under this plant.
    TIA.

    Hi Tehsin
    Thanks for the reply.
    In the transaction we can separately make it mandatory for either planning plant or order type.
    My requirement is for combination of both.

Maybe you are looking for