Storage location for 331 movement

Dear All.
Is it possible to assign storage location for sample usage movement in UD inspection lot stock tab. our requiremnt is through lot post material by 331 movement to Scrap storage location.
Regards.
dev123

Hello Dev,
Not really!
By 331 movement stock reduces from system.
Storage location is required for those movement types for which stock is either stored or transferred from one location to another.
What you can do is, you can transfer this quantity to block stock instead of sample usage. Later you can scrap this by 555 movement.
Regards,
Anand Rao

Similar Messages

  • Block Storage Location for Material Movement

    Dear MM Gurus,
    pl let us know how to block storage location for a material in Plant.
    Requirement is transfer posting (MIGO)  should not allow by using 311 mov type in sloc, error message to receive.
    example ;
    material ; 5000
    sloc ; 0001
    sloc ; 0002
    migo-transfer posting should not happen by using 311
    5000
    0001 - to 0002
    we want to block sloc-0002, how to block sloc, pl help if any solution available.
    thanx in advance
    regards
    srihari

    Hi,
    You can block the material completely for any movement type by checking <b>X Plant matl status</b> in Basic data view of material master.Or if you want to block specific movement type it will have to done thro authorisation but will apply to all materials .Here the authorisation object  M_MSEG_LGO    can be worked to remove the movement type or storage loaction .
    Dhruba

  • Storage Location for Movement type

    Hi,
    How do I set up Storage Location Can not Movement type '261' goods issue ?
    Thanks

    Thx for all yr replies ....
    I do agree with yr statements ....
    103 doesn't update inventory at storage location level therefore it doesn't make sense to have storage location at the time of 103.
    But at our end , we are using 103 for MIGO data entry by store user and 105 for MIGO approval .Store users are the right person who are enter correct storage location to which material should go.Therefore looking for a way thru which store user can enter storage lcoation at the time of 103 only.
    Since approvers or purchaser are not very sure about the correct storage lcoation to which material should move therefore storage location at PO level or 105 level will not help me.
    Any work around ??
    Regards
    Shreyh

  • Automatically creation of storage location for material, in MF60

    Hi all,
    my collegue of PP module uses MF60 transaction.
    When he puts XXXX as Replenishment storage location, the system tells him this error: To stge loc. XXXX does not exist for material M1010000182 in plant 0001.
    In MM i have activate the automatic creation of storage location for plant 0001 and for all movement types.
    Why MF60 does not respect this requirement?
    If I try to do movement type 311 with MIGO, manually, there's no problem to transfer the material from a storage location to , XXXX s.loc.
    Is there something more that I have to do?
    Thanks in advance!
    Best regards
    Alba

    Thanks a lot...
    the note says:
    Summary
    Symptom
    A material without storage location view exists.
    If within a single material document, this material is moved in such a way that no change in stock occurs in total, the system does not create a storage location automatically even if this is set in Customizing.
    Additional key words
    OMC3, XLAUT
    Cause and prerequisites
    All postings to a segment (for example, material, plant, storage location) are only executed if a change in stock occurs. Only in this case, storage locations are created automatically. This way it is made sure that no empty segments are created.
    Solution
    The system behaves correctly.
    Header Data
    Release Status:     
    Released on:     07.07.2000  22:00:00
    BUT why IF i do 311 in MIGO, system creates automatically storage location (also if no change in stock occurs in total).
    AND if doMF60  (that does mouvement 311), system does not create automatically the storage location?
    Best regards
    Alba

  • Re: Creation of storage location for halb which was not assigned primarily

    Creation of storage location for halb, every thing processed with raw materials for production orders reg  fert and even settled. Later a storage location is to be created for halb. When I created storage location for halb and when I want to post initial stock through MB1C I am getting error saying material type and storage location not maintained. Can any one solve my problem. Thanks in advance.

    Hi Vachanala,
    Are the material masters of your materials extended to the new storage location / have you defined automatic creation (for movement) in customizing (SPRO > Material Manegement > Inventory management & PI > Automatic movements > Create Storage Location Automatically)?
    If the material masters are not extended you can't book those materials to that SL.
    BR
    Csaba
    <b>material master</b>
    http://help.sap.com/saphelp_46c/helpdata/en/ff/515ee849d811d182b80000e829fbfe/frameset.htm
    <b>automatic creation of storage data</b>
    http://help.sap.com/saphelp_46c/helpdata/en/a5/6330f243a211d189410000e829fbbd/frameset.htm

  • Default Plant and storage location for components in MFBF

    Hi,
    I have 2 plants 1000-procurement plant and 2000- production plant. I am using special procurement key 70( Withdrawal from alternative plant from 1000 to 2000) for components in Plant 2000. The requirements for the components are transferred from 2000 plant to 1000 plant. The 1000 plant run MRP for the dependent requirements and procure the materials and transferred to the production storage location in Plant 2000.The raw materials are purchased in plant 1000 and transferred to Plant 2000 production storage location based on the manual reservations created with movement type 301. This is fine.
    But when I do backflush in MFBF the plant and storage location for the components issue are displayed as plant 1000 which is the procurement plant  and the production storage location in plant 2000-production plant location. In the BOM the production storage location is production storage location of plant 2000. Since we use the special procurement key system defaults the plant as 1000(procurement  plant) insteadd of 2000(production plant). can we make this plant default to the production plant 2000 as default in the MFBF goods issue screen.
    thanks and regards
    Murugesan

    Hi MURUGESAN !
          Can you give me some information more in Special Procument Configure in plant 2000 like:
              -  Procurement type (maybe F)
              -  Special procurement (Maybe U)
              -  Plant (Maybe 1000).
              - Issuing plant (maybe 2000)
           We will check together.
           Regards,
          Tony

  • Open a storage location for a material

    Hi,
    how can I open a storage location for a material ?
    Is also possible to do it automatically ?
    Regards

    A storage location is customizing, this is in general open to take any material.
    depending on the customizing setting for Auto.create storage location you allow SAP to add the storage location view to your material master automatically with the first movement of a material to a storage location or not.
    if you dont allow that, then you have to maintain the storage location view in material master manually for each storage location before you can post a movement for this material in a certain storage location.

  • Changing Storage Location for Optimized Photos?

    Is it Possible to change the storage location for optimized photos...-- takes up a lot of space on my primary drive-- i'd like to put it on the secondary with the photos.

    When you say:
    We have activated authorization check at storage location level using authorization object 'M_MSEG_LGO'.
    Does it mean that you are just using the object - M_MSEG_LGO in the authorizations or does it mean you have activated the authorization check at SLoc level in config along with the usage of auth. object(please note, they are 2 different things).
    The goods movement is part of the MM-IM component & this is used in MM, PP etc. So the object M_MSEG_LGO is checked whenever goods movement are posted, provided the config has been activated.
    To be sure, check in table T001L whether the field XBLGO has a X for the SLoc where you require this control.

  • Can I assign several physical storage locations for each virtual machine when using the replication-feature from Hyper-V 2012 R2?

    Hi everyone,
    I have 2x physical servers running Hyper-V 2012 R2. Each hosts several virtual machines. The VHDs of the VMs are stored on several dedicated physical disks to have a performance boost. For exampe if VM A has two VHDs attached I made sure that the VHDs are
    on different physical disks to have them not slow-down each other in case of intensive disk accesses.
    So far so good. I was looking forward to the replication-feature. The idea is to have the two physical servers have their primary running VMs being replicated to the other physical server and vice-versa. I was hoping to have the chance to choose for each
    individual VM where the replicated VHD will be stored. But instead I can only see the one location/path which is configured in Hyper-V Manager when I activate the replication-feature on the server.
    Is there by any chance a way how to select the storage location for each VHD/VM if using the replication-feature of Hyper-V 2012 R2?
    Thanks in advance.
    Cheers,
    Sebastian

    Secondly, you could replicate different VMs to different storage locations to perform some of the disk balancing you are trying to perform.  Lastly, you could copy the vhd file to a different location
    before starting the VM.
    .:|:.:|:. tim
    Hi Tim,
    thanks for the reply. Sorry, but I had some other tasks to take care of, so I wasn't paying enough attention to this thread.
    The part I quoted from your reply sounds exactly like the action I'd like to perform, but as you pointed out before this should not be possible.
    How can I perform the action (replicating each VM to a storage location) as you mentioned secondly? To sum it up again:
    2x physical machines carrying severel HDDs
    8+ VMs spread to run on the 2x servers
    when setting up replication I can only set the storage-location from server A on B and vice versa B on A
    Thanks again for your reply.
    Cheers,
    Sebastian

  • Where and how to find the storage locatation for the consignment stock

    where and how to find the storage locatation for the consignment stock (customer stock )  for more than one storage location .
    table :msku
    material no    -   werks - batch
    xxx                   sg11  - 200352ac
    table : mchb
    material no    -   werks  -lgort - batch
    xxx                   sg11   sg10   200352ac
    xxx                   sg11   gs11   200352ac
    note : each stock location having same batch no in different storage and my question how to find which link for msku to mchb .

    Hi,
    Try the table MARD: Storage Location Data for Material, where in the field LABST will give the stock field, against a given material/plant/Storage Loc.
    Regards,
    JLN

  • Block Storage location for particular material

    Hi,
    We gave defined storage location for finished product as follows>
    1050 - 2-8°
    1040 - RT
    When I have created one material, wrongly i have created it in 1050 instead of 1040.
    Then i have extend that material to 1040. Now that material is showing both storage locations.
    Is it possible to block storage location 1050 for this material only?
    Because of both SLOC thre are chaces of wrong receipt in 1050.
    Pl. help me to solve this problem.
    Gkude

    Dear Mr. Kunal,
    I have flagged storage location for deletion but till for this storage location system allows receipt also system allows stk. transfer in this location.
    Pl. help me so that storage location is permanently deleted from the material or system not allow for GR.
    Hope for your reply.
    Gkude

  • Is there any function module which will upload storage locations for a mat

    Hi gurus,
      Is there any function module or BAPI to extend the storage locations of material which is done through <b>MMSC</b> transaction. I need to write a program to upload new storage locations for some materials.Please advise.
    Thanks ,
    Sam.

    You can do this using the BAPI_MATERIAL_SAVEDATA
    Regards,
    Rich Heilman

  • Any Idoc for "storage location for a material" ?

    Hi Everyone,
    Does anybody know if there is an IDoc type to insert storage location for a material (Table MARD).
    BDC is also an option but IDoc should be a better choice.
    Thanks & Regards,
    Ankur

    Hi Ankur,
    Storage location view of a material can be created with
    MATMAS message type ( Segment E1MARDM )  . You can also use program RMDATIND with relevant data to add the storage location view.
    Cheers.

  • MIGO: determination of storage location for empties

    Hello SD experts,
    Case: plant A delivers materials to plant B (interplant delivery). This delivery is posted GR through TC MIGO (based on delivery). Now, the issue is that SAP is not able to automatically determine the storage location for the empties (crates and crate containers). Can ayone tell me how we can let SAP do this automatically?
    Currently, we use WM for all finished products (storage location 0100). Empties are however not WM managed (storage location 0110). Empties are calculated and added in the delivery (user exit MV50AFZ1); not in the sales order.
    All replies are highly appreciated!
    Thanks and kind regards,
    Wander

    Hi,
    - If storage location for picking is not specified in the order item, the system determines the storage location when it creates the outbound delivery and copies it into the delivery item. Otherwise, the storage location entered in the order item is used in the outbound delivery.
    - The system determines the picking location based on a rule defined in the delivery type. The following rules are shipped in the standard system:
    - MALA: The picking location is determined based on the shipping point, the delivering plant, and the storage condition for the material as defined in the material master.
    - RETA and MARE: These rules are mainly used in trade scenarios.
    - You can also use the customer exit in SAP enhancement V02V0002 to implement storage location determination.
    - The picking location search is activated for each delivery item category.
    <b>Reward if helpful.</b>

  • LSO 600 Configuration - Central Storage Location for XSLT Files

    Hi,
    We are implementing LSO 600 with enhancement pack 2 and I am haiving trouble figuring out what do do with the configuration steps
    Enter Address of Central Storage Location for XSLT Files
    and
    Enter Address of Central Storage Location for Templates.
    The config notes indicate that these can be a directory or network path with the format
    servername\filename\.
    As I understand it this is is the address of the file on the Portal Server where  XSLT files and templates be stored. The problem that I am hearing from the basis team is (I am qouting an email from them) "who accesses the share? Is it the server, the client PC or both? We’re running in a linux environment so I don’t have any shares the PC can access."
    Does anybody have any input?
    Thanks,
    Andy

    Hi Andy!
    I am happy that the issue is already clear!
    Beeing busy makes life more interesting )
    May I ask for your private mail, because I had some questions regarding your LSO implementation.
    Mine is:
    [email protected]
    Thx in advance and have a nice day!
    best regards,
    Zsolt
    P.S.: since I am a Moderator for SDN it is my job to keep the rules on the Forum therefore I would like to ask you to close this thread because the question - as you stated - is answered.
    Thank you!

Maybe you are looking for

  • Setting default member of attribute hierarchy in MDX script. Default member not taken into account while using user defined hierarchy

    Hi all I have a date dimension that (type time) with attributes - [FiscalYear] (type years) - [FiscalMonth] (type months) - [FiscalWeek] (type weeks) In addition to the attributes used in the natural hierarchy, I have an attribute [PerType] containin

  • Crystal Reports for VS 2010 "Recent Pages" history is erased in IE 8

    Hi,          We have a reporting application developed in Asp.Net 4.0 and Crystal Reports for VS2010. When application displays a report and user tries to navigate report pages, for some reason in IE 8 the "Recent Pages" history only keeps 2 most rec

  • Cisco Nexus 5000 upgrade

        Is there any gotchas or things we should know when going from version  5.1(3)N2(1)   to a  7.X level code ?   Is it as simple as getting the code and kickstarter images on and then using the install command.  these are all single supervisor modul

  • How to use Contains method in Linq

    Hi, I am using the below LINQ and I am getting an exception. Please help me to work around it. I want to use Contains()  string [] values = new string[]{"U","O","D" };  var exist = (from seq in  connection.BUSINESS_LINE_TEAM   where seq.FK_BL_ID == t

  • IPhoto '11 with corrupted Places

    I've got a weird situation occurring in Places - where multiple images (100+) which were originally "tagged" in separate locations are now referencing the same incorrect name and location. When I try to delete this errant place in "Manage My Places",