Storage Location for Movement type

Hi,
How do I set up Storage Location Can not Movement type '261' goods issue ?
Thanks

Thx for all yr replies ....
I do agree with yr statements ....
103 doesn't update inventory at storage location level therefore it doesn't make sense to have storage location at the time of 103.
But at our end , we are using 103 for MIGO data entry by store user and 105 for MIGO approval .Store users are the right person who are enter correct storage location to which material should go.Therefore looking for a way thru which store user can enter storage lcoation at the time of 103 only.
Since approvers or purchaser are not very sure about the correct storage lcoation to which material should move therefore storage location at PO level or 105 level will not help me.
Any work around ??
Regards
Shreyh

Similar Messages

Specify Storage location in Movement type 311 - Migo

Dear All
we have 3 plants 1000 , 2000 , 3000 , every plant have many storage location as the following :
plant 1000 ( A01 , A02 , A03 )
plant 20000 ( B01 , B02 , B03 )
plant 1000 ( C01 , C02 , C03 )
i have on user "XX" access only plant 1000 ( A01 , A03 ) for some movement type (101 - 161 - 261 ) , also he used movement type ( 301 - 311 - 313 -315 ) to transfer from his storage location A01 , A03 to other storage location B01 , B02 , B03
when we add transaction MIGO to the user XX
how can i specify that user can only transfer to storage location B01 , B02 , B03 without access any movement to the storage location B01 , B02 , B03 .
i need help urgently

Hi,
You may maintain the authorization check for storage location in the path: OLMB - Authorization Management - Authorization Check for Storage Locations. Now, use the authorization object M_MSEG_LGO to restrict the usage based on user role. Refer the KBA: 1668678 - No authorization check for storage locations in inventory management
But if you are using one step procedure for stock transfer (301), then the user should have authorization for both plants to transfer the goods. If you want to restrict the same, you may go for two step procedure. But in case of 311 & 313, both the storage locations are entered in MB1B and hence both the storage locations are checked for authorization. Refer the note: 205448 - Authorization check M_MSEG_LGO for stock transfers
Regards,
AKPT

Create storage location automatically for movement type 261

Hi Experts,
Currently we're inprocess of implementing "create storage location automatically" for reservation, and I've done with the configuration for both reservation side (Define Default Values) and movement type side (GI/transfer posting - Create Storage Location Automatically).
For movement type 201, new storage location successfully extended/created using T-Code MB21 (Create Reservation). But we found an error message while conducting the same thing for movement type 261 (which only can be created using T-Code IW31 (Create material reservation form Work Order).
Did we missed any required configuration? Pls kindly advice on what we should do.
Thanks a lot. Really appreciate the prompt response.
Rgds,
MD

Here's the current situation,
We configured the plant/storage view (SPRO), most of materials already extended to desired plant and storage location. Commonly, we can extend or create any materials for certain plant and/or storage location by maitain material master data (using T-Code MM01).
Recently, we develop the additional configuration to activate "automatic create storage location" for reservation, aligning with the movement type for Goods Issue (201,221,261,301,etc).
Let's say we have material number 123456789 and currently assigned to plant YYYY, but not extended to storage location XXXX. By performing T-Code MB21 (create reservation) with movement type 201 inputted, the respective material (123456789) is automatically created for the XXXX storage location.
But the above condition is not effected while performing the same thing using T-Code IW31 (create material reservation via Work Order) with movement type 261 (GI for Order).
Any idea to perform create storage location automatically while creating reservation for movement type 261? is there any possible configuration or procedure to be added?
Thank you

Storage Location field mandatory for Movement Type 103

Hi , We are using movement type 103 and 105 to receive material.
Here we want to make storage location mandatory for movement type 103.
How can we do that.
Regards
SHREY

Thx for all yr replies ....
I do agree with yr statements ....
103 doesn't update inventory at storage location level therefore it doesn't make sense to have storage location at the time of 103.
But at our end , we are using 103 for MIGO data entry by store user and 105 for MIGO approval .Store users are the right person who are enter correct storage location to which material should go.Therefore looking for a way thru which store user can enter storage lcoation at the time of 103 only.
Since approvers or purchaser are not very sure about the correct storage lcoation to which material should move therefore storage location at PO level or 105 level will not help me.
Any work around ??
Regards
Shreyh

Storage location for 331 movement

Dear All.
Is it possible to assign storage location for sample usage movement in UD inspection lot stock tab. our requiremnt is through lot post material by 331 movement to Scrap storage location.
Regards.
dev123

Hello Dev,
Not really!
By 331 movement stock reduces from system.
Storage location is required for those movement types for which stock is either stored or transferred from one location to another.
What you can do is, you can transfer this quantity to block stock instead of sample usage. Later you can scrap this by 555 movement.
Regards,
Anand Rao

Block Storage Location for Material Movement

Dear MM Gurus,
pl let us know how to block storage location for a material in Plant.
Requirement is transfer posting (MIGO) should not allow by using 311 mov type in sloc, error message to receive.
example ;
material ; 5000
sloc ; 0001
sloc ; 0002
migo-transfer posting should not happen by using 311
5000
0001 - to 0002
we want to block sloc-0002, how to block sloc, pl help if any solution available.
thanx in advance
regards
srihari

Hi,
You can block the material completely for any movement type by checking X Plant matl status in Basic data view of material master.Or if you want to block specific movement type it will have to done thro authorisation but will apply to all materials .Here the authorisation object M_MSEG_LGO can be worked to remove the movement type or storage loaction .
Dhruba

Error:storage location for material's valuation type does not exit

create physical inventory document for material , it has a error message "Storage location X105 for material 0004AA00 plant 1151 valuation type **** does not exist", MMSC is ok, so i don't know what question?

Hi Yan,
If no previous goods movements have been posted yet for the combination of the relevant material, plant, storage location and valuation type the physical inventory cannot be done.
The table MCHB is used for both batch managed materials and materials with split valuation. You can only create a physical inventory document for a material with   split valuation when both, a MARD and a MCHB segment are available.
When you create a valuation type in the material master, only the table MBEW is updated - an entry is not created in the table MCHB. This is needed however to perform a physical inventory for this material.
This MCHB segment is created when you perform a goods receipt for the material, but (like with batches) a physical inventory posting cannot   create this entry in the table.
You will need to create a material posting for these materials if you wish to create a physical inventory for them. On the other hand, please,    consider that it is not necessary to create a physical inventory for those materials which have not suffered any goods movement at all.
If you want to make a physical inventory for a material valuated separately, you have to proceed as follows:
- make a goods receipt (561)==> then the stock segment will be created
- make the reversal of the goods receipt
- make the inventory.
Hope this can help
Regards,
Mauro

Automatically creation of storage location for material, in MF60

Hi all,
my collegue of PP module uses MF60 transaction.
When he puts XXXX as Replenishment storage location, the system tells him this error: To stge loc. XXXX does not exist for material M1010000182 in plant 0001.
In MM i have activate the automatic creation of storage location for plant 0001 and for all movement types.
Why MF60 does not respect this requirement?
If I try to do movement type 311 with MIGO, manually, there's no problem to transfer the material from a storage location to , XXXX s.loc.
Is there something more that I have to do?
Thanks in advance!
Best regards
Alba

Thanks a lot...
the note says:
Summary
Symptom
A material without storage location view exists.
If within a single material document, this material is moved in such a way that no change in stock occurs in total, the system does not create a storage location automatically even if this is set in Customizing.
Additional key words
OMC3, XLAUT
Cause and prerequisites
All postings to a segment (for example, material, plant, storage location) are only executed if a change in stock occurs. Only in this case, storage locations are created automatically. This way it is made sure that no empty segments are created.
Solution
The system behaves correctly.
Header Data
Release Status:
Released on: 07.07.2000 22:00:00
BUT why IF i do 311 in MIGO, system creates automatically storage location (also if no change in stock occurs in total).
AND if doMF60 (that does mouvement 311), system does not create automatically the storage location?
Best regards
Alba

Error in Transfer posting for movement type 303

Hi Sir,
I am getting following error while doing Transfer posting for movement type 303 thru BAPI_GOODSMVT_CREATE
Error in Function:
Order    not found or not permitted for Goods Movement.
I am passiing all mandatory parameter for it as per BAPI Documentaion in tcode BAPI
Transfer posting
Transfer posting without reference to a reservation
The following fields must be populated:
Material number
Plant
Storage location
Movement type
Movement indicator
Quantity in unit of entry
ISO code unit of measurement for unit of entry
If I am doing manually by MB1B tcode, it is successfully done.......here its not asking any ORDER No...
Please help me .........
Regards,
Krishan

I'm not sure what you're system set up is...   So I'd suggest looking at everything you enter on the screen and then checking to make sure you are passing all the information in the BAPI.
With that said our system does require posting date, and batch. You might check that.   Also check that you've included all the required information in the header.
Did you use the same data when you tried to process the BAPI that you used when you tried to do MB1B manually?

Re: Creation of storage location for halb which was not assigned primarily

Creation of storage location for halb, every thing processed with raw materials for production orders reg fert and even settled. Later a storage location is to be created for halb. When I created storage location for halb and when I want to post initial stock through MB1C I am getting error saying material type and storage location not maintained. Can any one solve my problem. Thanks in advance.

Hi Vachanala,
Are the material masters of your materials extended to the new storage location / have you defined automatic creation (for movement) in customizing (SPRO > Material Manegement > Inventory management & PI > Automatic movements > Create Storage Location Automatically)?
If the material masters are not extended you can't book those materials to that SL.
BR
Csaba
material master
http://help.sap.com/saphelp_46c/helpdata/en/ff/515ee849d811d182b80000e829fbfe/frameset.htm
automatic creation of storage data
http://help.sap.com/saphelp_46c/helpdata/en/a5/6330f243a211d189410000e829fbbd/frameset.htm

Re: Changing Inspection lot origin from 08 to 05 for movement type 322 and 349

Reference discussion: Changing Inspection lot origin from 08 to 05 for movement type 322 and 349
With reference to the above discussion and your explanation for user EXIT QAAAT0001, it was stated that:
If you only have two inspection types, you can mark one as preferred. Then with exit use logic that if MM = 311 use preferred inspection type, if 911 use, non-preferred inspection type.
May I ask what are you refer to for MM? It seems like movement type to me, however, I can't find movement type field in the structure within the component of EXIT_SAPLQAAT_002. Appreciate if you could shed some light on this.
Best Regards,
CY
Branched from older discussion by moderator. When there are questions concerning an older discussion, please create a new discussion with reference to the older one. Thanks!

Yes.. you are correct. But with the info that is provided by EXIT_SAPLQAAT_002, you should be able to identify the proper material document in table MSEG which will have the material movement.
You can use the values of plant, batch, material number, Purchase order number, Order number, item number, storage location as well as the current date since the exit would normally be executed on the same date the material movement was done. You'd also probably only execute the logic if QKZ is "X".
Craig

Print out for movement types

Hi Friends,
How to configure print out for movement type 561 or for scrap ?
Can you pl tell me step by step where and how to configure?
Appreciate your help.
Thanks,
Venkat

Hi Venkat,
What you want to print. if you only want to print out the transaction done thr movement type 561. If you are not going through any development then follow the under mentioned process :
Go to MB51- Select the material, Plant & storage location- put the movement type 561 & 562- select the ranges of date- execute it. System will give the report. Then for print out go to List tab and select the print. After clicking on the print tab, you have to fill some informations like- Output device- Put Locl then No of copies-then click on continue. System will give you to select the printer. Just select and print.
If this is enough then ok otherwise inform me.
Hope this will clear your issue.
T & R,
Brijesh

Default Plant and storage location for components in MFBF

Hi,
I have 2 plants 1000-procurement plant and 2000- production plant. I am using special procurement key 70( Withdrawal from alternative plant from 1000 to 2000) for components in Plant 2000. The requirements for the components are transferred from 2000 plant to 1000 plant. The 1000 plant run MRP for the dependent requirements and procure the materials and transferred to the production storage location in Plant 2000.The raw materials are purchased in plant 1000 and transferred to Plant 2000 production storage location based on the manual reservations created with movement type 301. This is fine.
But when I do backflush in MFBF the plant and storage location for the components issue are displayed as plant 1000 which is the procurement plant and the production storage location in plant 2000-production plant location. In the BOM the production storage location is production storage location of plant 2000. Since we use the special procurement key system defaults the plant as 1000(procurement plant) insteadd of 2000(production plant). can we make this plant default to the production plant 2000 as default in the MFBF goods issue screen.
thanks and regards
Murugesan

Hi MURUGESAN !
      Can you give me some information more in Special Procument Configure in plant 2000 like:
          - Procurement type (maybe F)
          - Special procurement (Maybe U)
          - Plant (Maybe 1000).
          - Issuing plant (maybe 2000)
       We will check together.
       Regards,
      Tony

Destination plant, description, material are editable for movement type 313

Hello
We are using movement type 313 for the transfer posting between storage location. We use MIGO for the same.
Ideally for the movement type 313, the destination plant and material should not be visible. We enter the material, batch,plant and storage locaiton in "From" side and enter only the storage location in "To" side of the MIGO screen. But now suddently after the EHP4 upgrade, we could able to enter the plant and materil in the "To" side also.
I checked the Field selections in OMJJ for movement type 313 and found that plant and material fields are suppressed.
Do you have any clue on why suddenly i am facing this problem and what could be possible solution.
Thanks
Venkat.

Sounds like you're just dumping your spec here. What have you tried exactly to solve this yourself?
Thomas

Error during search for movement type (953)

Hi All,
When I'm trying to issue goods to an internal order, I get the below error
Error during search for movement type (953)
The explanation is as follows
The movement type of the warehouse system and certain parameters are assigned to each movement type of the inventory management system
In this case no movement type of the warehouse management system was assigned to the inventory management movement type used by the paramaters enclosed in parantheses in the eror message.
Is there some config missing in this case?? Please let me know how to overcome this error
Regards,
Ashwin

when you create new movement types in MM, then you certainly have to create WM movement types too, if you want use the new movement types to post at a warehouse managed storage location.
This customizing needs to be done in IMG > LE > WM > Activities > transfers > define movement types
and
IMG > LE > WM > interfaces > inventory management > define movement types

Storage Location for Movement type

Similar Messages

Maybe you are looking for