Storage location from Shopping Cart is overwritten in PO

Hi
I am trying to convert a Shopping Cart to Purchase order using the sourcing application. However while doing that my Shopping Cart Storage location always gets overwritten by one particular Storage Location in PO. Even if i try and change the storage location to the correct one in PO, it again gets overwritten. This is causing problem during the Goods Receipt.
I am using the SRM 5.0 version and recently the system got upgraded to Support Pack 9.
Any help in this regard would be highly appreciated.
regards
manoj

Hi Manoj,
Please go through the following observations based on the information you have provided :
1. Check the Extended Attributes tab for the user whether the concerned plant and storage location were maintained or not.
2. Check whether that particular storage location is maintained for the concerned plant or not.
3. Check for the same using different user and different plant storage location combination.
Its difficult to say exactly what is the problem but for me it looks to be the storage location is not maintained for a particular plant thats why its taking the default storage location (generally the first one in alphabetical order)
Please revert after checking the above observations for further help.
Reward points for suitable answers.
Rgds,
Teja

Similar Messages

  • Auto creation of po from shopping cart

    hai gurus
    Iam in SRM 5.o,CLASSIC Scenario.
    In configuration for "Auto creation of po from shopping cart"i  have given "purchase order if item data complete,otherwise PR"in  SPRO>SRM>srmserver>cross application basic settings>Define  objects in Backend(PR,PO,requisition)
    So shopping cart is been created with PUR org,PUR GROUP,Vendor tax code,account assignment etc,but  purchase requisition is created and not  purchase order.Is there any  settings left over
    Thanks in Advance
    chandra

    Hello Chandra,
    You also could use the PR (in ECC) and try to convert it into a PO (ME57). If it asks you for some additional data (e.g. vendor, price, ..) this might indicate, that it is missing in the SC.
    Also, you could try and debug transaction ME59 (auto PO creation) to see, what's missing/checked.
    Good luck.
    Franz

  • Error in creating PO from shopping cart

    Hi,
    While creating PO from Shopping Cart in SRM, we are getting the error message "Net price must be grater than 0" and the PO is not getting generated.
    Is this issue is somewhere related to maintainance of pricing conditions? if yes, how can we maintain that?
    Regards,

    Hi,
    Are you creating PO directly from shopping cart or through PR.If through PR (Purcahse requisation) then chack the valution price in valution tab in PR (ME53N)
      PO directly from shopping cart then check the price in Basic data of the shopping cart.if price is there it should reflect in PO.Check your shopping cart free Zero value shopping cart.

  • Excluding storage location from MRP run in Long Term Planning

    Hi,friends,
         In my scenario , i want to exclude storage location from MRP run in long term planning.When i set storage location MRP indicator "2" in SPRO and SLoc MRP indicator "1" MRP4 in material master, i can exclude the storage location after run MRP with MD01/MD02,and i can see the expected result in MD04.But in Long Term Planning scenario the storage location can not be excluded after run MRP with MS01/MS02,and the requirements list in MS04 include the stock in the storage location i want to exclude. i dont know if i miss something.Plz give me some advice.
    Regards
    Joey

    Hi,
    Refer the OSS Note 208017 - LTP: Long-term planning and storage locations
    ==========================================================================
    Symptom
    In long-term planning (Transactions MSBT / MS01 / MS02 / MS03), the MRP indicator of a storage location for a material is not taken into account (material master, view MRP 2 [up to and including Release 3.1I] or MRP 4 [as of Release 4.0A]).
    The storage locations excluded by MRP or planned separately are also planned in the plant segment.
    Additional key words
    LTP, MM01, MM02, MM03, master data, MRP indicator, LGORT ...
    Cause and prerequisites
    The MRP indicator for a certain storage location of a material is only taken into account in operative planning (requirements planning, MRP).
    The long-term planning occurs exclusively at plant level.
    Solution
    This is no error. The system works as intended.
    The individual storage locations should not be distinguished in the long-term planning, in order to perform a comprehensive long-term planning.
    This is important, for example, within the kanban processing where the storage locations with kanban MRP are excluded from the MRP, but in spite of that should be included in the long-term planning.
    ==========================================================================
    Regards,
    Siva

  • I want to exclude a storage location from MRP

    I want to exclude repair storage location from MRP so that the stock with repairs storage location should not be considered for other demands.
    Also repair storage location stock should not be calculated against 'stocks'  term in MD04.
    How to do this ? Pls share.

    Hi,
    In transaction OMIR, choose your plant & then for the storage location you want to exclude from MRP enter 1 (exclude from MRP).
    After this setting is maintained, whenever a material is created in this plant & storage location, it will have MRP indicator as "1" in the mrp 4 view .
    For materials already in this storage location if the MRP indicator "1" is not maintained in mrp 4 view, please go for a mass change maintenance in the material master & maintain this indicator.
    Stock in the excluded storage location will not add up to the stock which is displayed in the top in the md04 screen. This stock will be displayed separately in the bottom of the screen.
    Please let me know if you have any questions.
    Regards,
    Senthilkumar

  • Exclude stock at a storage location from the Productionn Planning run

    Hi,
    We have to exclude a storage location from the Production Planning run. We already implemented a user exit in CIF and changed the stock at the storage location to a category Z1 that is not relavant to SAP, but the stock at the location is still being consitered for production planning.
    Please suggest a way so that it is excluded from the Production planning
    Regards,
    Sireesh

    Hi Sireesh,
    Please try these following options.
    1) Filter this storage location in the programme /SAPAPO/RMSDPDEP by writing customised code with an abapper, so that it will drops the storage location stocks not getting planned during deployment
    2) Try anyof these user exists
    APOBP011 Enhancement for Stock BAPIs (BUS10504)
    APOCF011 Inbound Processing: Stock
    APOCF027 Customer-Specific Enhancements: Stock
    3) Exclude the category from the ATD receipts category group maintained in the master data
    Regards
    R. Senthil Mareeswaran.

  • Deactivation of storage locations from MRP run

    Hi gurus,
    How can i deactivate a particular storage location from MRP in a particular plant.
    Regards
    Kaisar

    Hello,
    There are 2 ways of doing that.
    1. With the Transaction OMIR and selecting th indicator 1 Storage location stock excluded from MRP
    This storage location will be excluded from MRP.
    2. For a Specific Material(s), if you want the Storage location to be excluded from MRP:
    You need to select the storage locatio MRP indicator as 1 in MRP4View of the Material.
    Some concerns:
    Your Materials are extended to the St.location say xxxx.
    Now if you want this storage location to be excluded from the MRP.
    By simply seeting the Customization settings will not work.
    You need to manually select the MRP4 view and change the St.Loc MRP Indicator to 1.
    The Materials created after this customization setting will adopt this settings automatically.
    Hope this helps..
    Regards,
    Siva

  • Need to exclude storage location from MRP.

    Hi Gurus,
    Is there an option to exclude a specified storage location from MRP at configuration level. But not at material level as in MRP4 view.
    We have excluded the stoarge location in config OMIR, however the system considers that stock if the same is not excluded in MRP4 of that material.
    Now, the problem is every time i need to go to the material master of every material  i have to excude from MRP, which is very time consuming..!
    Please advise me is there any option in point of view of Storage Location,  just simply  define the storage location to be excluded from MRP run.
    Thanks in advance.
    Naveen.

    Dear,
    Yes you can do it though OMIR or MMSC 1-Storage location stock excluded from MRP.
    Also check this link for more details,
    Exclude purchase order on storage location from MRP
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on May 25, 2009 12:22 PM

  • Reservation not getting created from shopping cart for stores order.

    Hi experts,
    Reservation not getting created from shopping cart for stores order,process used is some custom BADI.Extended classic scenario is the procrss .
    Please help me
    Thanks in  advance.

    Hello,
    please check below wiki:
    Determination of the follow-on document type
    Regards.
    Laurent.

  • Default Storage location from the Material master

    Can we default the storage location from the material master into the reservation line item in trasaction MB21?

    enter the production storage location in material master MRP2 view.
    Edited by: Jürgen L. on May 7, 2008 6:52 PM

  • Default Storage location from PO to GR

    Dear All,
    How i can made storage location from to come automatic while i am doing the GR through MIGO movement type 101, but it should be changeable but main thing it should appear from PO while i am doing GR.
    regards,
    qsm sap

    Hi,
    First Storage location should be extended in Material master.
    Then you can include this Storage location in PR . If you are creating PO based on PR then it will copy to PO.
    While doing GR in MIGO with respect to PO the system will default this Storage location & stock will be posted to that Storage location.
    If you extended in Material master but not inputed in PR/PO system will not default in MIGO.
    One other option is In IMG settings if you set the checkbox set storage location automatically.
    Then in MIGO you can directly choose any storage location which is created for your plant.(Make sure the str loc should be part of Plant)
    No matter if you extended in material master/PR/PO
    rgds
    Chidanand

  • Table for storage location from MIGO in the index "where"

    Hi,
    I would like to know the in which table is saved the storage location.
    I would like to take the storage location from MIGO in the tab index Where.
    Thanks.
    Dede

    Hi Glen,
    If I got it right... You want table MSEG for movement (table T001L for Sto. Location master - tcode OX09).
    Cheers.

  • Exclude purchase order on storage location from MRP

    Hi Everyone,
    We have excluded storage location 1200 from MRP.
    The result shows only stock on 1200 excluded from MRP, PO on storage location 1200 (storage location 1200 in PO) still considered in MRP.
    Is there any way to exclude PO on 1200 i MRP also?
    Best Regards,
    Bin

    Dear,
    Go to MRP 4 view of the material master .
    In the field SLoc MRP indicator field "1".
    If it is for a material than in the material master level it can be done. If you are looking for all materials in that storage location, than it is better to define this in SPRO->Production->MRP-->Planning-->Define Storage Location per MRP plant. Here for that storage location in that plant you need to define "2" - Storage location stock planned seperately or "1" - Exclude Storage location from MRP.
    Also u can use t.code MMSC.
    Select Material & Plant and Assign MRP =1 for the Sloc to be excluded
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on Nov 14, 2008 9:32 AM

  • Replicating storage locations from SAP SRM

    Dear Experts,
    How to replicate the storage locations from ECC to SAP SRM? How you can restrict the selection of storage location in SAP SRM based on the plant selection? i.e. plant 1000 has three storage locations say 1001, 1002, 1003. Now, when the user selects the plant 1000 as delivery address in direct procurement scenario, then the system should allow only the three values in value help?
    Thanks and regards,
    Ranjan

    HI Ranjan,
    Did you try by removing 'Storage Locations" from Extended Attributes in PPOMA_BBP?
    thanks,
    Rahul Mandale

  • Exclusion of storage location from ATP

    Hi Gurus,
    Can anybody pls tell me how should i exclude a storage location from ATP check.
    Regards
    Kaisar

    Hello,
    The below link may be useful..
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/f4/7d326d44af11d182b40000e829fbfe/content.htm
    Regards,
    Siva

Maybe you are looking for