Storage Location in PR
Hi,
While creating PR, the storage location for some materials are coming automatically and for some materials the storage location is not coming (while the storage location is available in material master). Any idea about this?
Thanks,
Hi
Suppose if the material is assigned/extended for one storge loc in material master system gives that storage loc in PR but the same material is extended for the many storage loc in material master then system allow for the user to select.
Regards
Ganesh
Similar Messages
-
Opening and closing stock at storage location level
Dear all
I need a std report which will give the opening and closing stock at storage location level, Or should I go for dev. if yes please guide me.
Regards
SamuelHi,
check if you can use S_P00_07000139 report, select "Display stock movement by plant (with amount) and further select Sloc from layout.
Regards,
Vikas -
Report including open purchase order quantity for one storage location
Hello gurus,
I am looking for a report giving me the total/available stock and the open purchase order quantity for all materials stored in a certain storage location.
I.e. like this:
Plant 0001, storage loc. 01
Material stock open purchase order quantity
100000 200 pcs. 50pcs.
Is there such a report in SAP standard?
Thanks
AliciahI
U want the report like this ,
MAterial stock availablein storage location and with Open PO quantity for the same material.???
This report u can get in 2 different transaction . the n u can combine and create one custom transaction .
One is for materil stock in storage location is MB52 or MB5B
THen ME2N for open PO quantity for that material. -
Hi Experts,
We want a report Date Wise(As on 31.03.2008) and Storage Location Wise Quantity & Value Report for only Finish Materials. Is there any report ?
From Mb5b we canot get storage location wise report as we get only plant level qty and value.
Pl. guide us.
Regards,
YusufHi Yusuf,
Try the Tcode: MC.9 there enter the site and article and executeYou will get details of the article
stock, value. if you double click the article you will get the details of storage location.
Hope it will be help for you
Regards
GK -
Stock on posting date -storage location and batch wise
Dear All
I need to developa report exactly same as MB5B but with storage location and batch wise.
We need storage location wise opening stock, total receipts, total issues and closing stock, and values for given time period.
I have gone through some history tables like MCHBH and MBEWH.
But all the history tables are having fileds for period wise but not date wise.
Any focus on this?You have to read the coding of MB5B to see how SAP is doing it.
The stock per date is calculated, starting from a month end, adding or reducing quantities based on movements until the date in question is reached. -
Storage location wise Opening/Closing Stock on posting date (mb5b)
Hi,
Report mb5b gives opening stock and closing stock as on date. In the selection screen, if we do not enter specific storage location then the opening/closing stock is displayed as sum of all storage location stocks for a given material.
Where as if we enter storage location, it gives storage location specific output. (with Storage loc/batch stock radio button)
My requirement is - without entering storage location in the initial screen, the system should display storage location specific opening/closing stock.
To get this, presently I need to execute mb5b transaction individually for every storage location.
Warm regards,
MSHi Madhavi
This report you can have in T code MC.6 and another t code for opening and closing stock in t code MC.9
Regards
Vivek
-- Reward if helpful
Edited by: Supergene on Feb 28, 2008 3:17 PM -
Opening and closing Stock report at Storage location level- date wise
Dear all
Is there any standard report to view opening and closing stock at storage location level? ( we have MB5B which resets the entry screen if we enter SLOC details).
Thanks
SamDo I have the option of selecting Storage Location wise opening and closing stock on a particular date or period, that is what I have requested? Is it possible, evenafter selecting storageloc/batch stock and entering all the SLOCs in the selection creen, the report output does not contain any SLOC, and using ctrl+F8 or display variant does not have SLOC as a field also.
pls gudie
sam -
MC.9 drill down at storage location level
In mc.9 report stock against plant xxxx at storage location drilldown
I see
In total valuated stock is 0
But
at storage location 0040 I see 423.686 as valuated stock
and at storage location 5M06 I see minus 423.686 as valuated stock
Client need to have not stock at plant level.
In total I see 0
But client is bothering about valuate stock he is getting at storage location level.
Thanks,
KiranHi Jurgen,
For plant xxxx there is nil stock in mc.9 report. only I see sloc to sloc transfer of qty. for example sloc 0001 has qty + 100 & sloc 0002 has qty -100.
Finance is asking to user that this + - qty should not show in mc.9 and asking him to get it removed.
What should I suggest to user and finance.
Thanks,
Kiran -
Mc.9 Multiple storage location issues
Hi,
I am fetching data from mc.9 in my program but if the use enter multiple storage in selection only 1st value is printed following is code and how will i come to know which material is for which storage location since mc.9 data is not getting stored anywhere
SELECT-OPTIONS : SLOC LIKE S031-LGORT.
SUBMIT RMCB0300 WITH SL_WERKS-LOW = PLNT
WITH SL_LGORT IN SLOC
WITH SL_MTART = 'HALB' WITH SL_MTART = 'VERP'
WITH SL_MTART = 'ROH' WITH SL_MTART = 'FERT'
WITH SL_SPMON-LOW = FPERIOD
WITH SLV_NO = 'STK'
WITH SL_SPMON-HIGH = FPERIOD EXPORTING LIST TO MEMORY AND RETURN.
while append to internal table even if i specify both high and low value it prints low and high incorrectly how will this problem will solved
itab-lgort = sloc-low.
Help required for same.
Thanks
ShrutiHi Shruti,
I simulated the code given by you and all the storage locations are being populated in the backed.
You can check this by putting a breakpoint at the below code in RMCB0300 and checking the value of sl_lgort[]. You will receive the number of SLOC inputs provided.
AT SELECTION-SCREEN OUTPUT.
FLG_FOUND = FALSE.
PERFORM SPEZIAL_AT_SELECTION_SCREEN_O IN PROGRAM (LIS_PROGNAME)
CHANGING FLG_FOUND
IF FOUND.
This is a data issue and you may not have any records for the selected input.
Regards,
Jovito.
Edited by: dsouzajovito on Dec 29, 2010 5:56 AM -
Report for material documents with storage location
Hi gurus,
I would like to know if there is a report to display material documents but in the same screen display storage location from and storage location dest.
Thanks for your help.
Regards.Hi,
You can use MB51 or MB59 with customised layout selection for your requirement.
With regards,
Ajay. -
Goods Receipt requirement other than standard storage location
Hi,
SAP Guru,
Kindly guide on how to take receipt of Raw Materials against Purchase order or without Purchase order at other than RM01 or RM02 Storage Location
i.e. we purchase RM from Vendor A and we give this material to Vendor B for Job work and then we take GR from Vendor B
We generated 2 Purchase Orders for Vendor A and Vendor B
We cannot take receipt from Vendor A becuase they supplied prohibited material which cannot be taken as receipt directly in to SAP Standard Storage location instead we require to take receipt of same which accounts for Vendor B through which we can do Billing activity
With Regards,
kunal shethhi
as the vendor B is ur subcontractor ,u an use sub vendor deliery in po
create po for vendor A
now initem level delivery address tab ,at right side in vendor field give vendor B and tick for SC vendor
now the delivery will be done at vendor side
just try it
regards
KI -
Opening and closing balance values at storage location level
Dear all,
I want to know opening and closing balance values and receipts and issue values at storage location level for certain period.
I tried with MB5B, it is not giving value at storage location level, it is giving quantities at storage location level and values at plant level. But requirement is: please see below example:
All values are in USD
Storage location: 1001 1002
Opening Balance: 2000 3000
Receipts: 1000 2000
Issues: 2000 3000
Closing Balance: 1000 2000
Please help in this regard (I want value of the stock only, not qty)
Regads,
Veerappa
Edited by: Chinna Veerappa on Jul 27, 2010 5:27 PM
Edited by: Chinna Veerappa on Jul 27, 2010 5:28 PMvlauation is at plant level (MBEW table) the storage location level does not carry values (table MARD).
You may have to develope your own ZMB5B program and calculate yourself what is not stored in SAP. -
Stock valuation down to Storage location level
Dear all,
System setup for stock valuation is till Plant level. And understand that's how data stored in table MBEW and MBEWH until plant level only.
Eventhough that is system standrd, is that possible to get the stock valuation until Storage location level?
For eg: In MB5B, there is opening stock, closing stock and the material movement posting. I need to get opening and closing stock for each storage location.
Could you please comment if there are tables store these data? Kindly comment.Hi Afshad Irani,
Thanks for your reply. Understand from the previous post that stock valuation for storage location can be done via table MARDH or report MC.9, but this tools are excess base on period/month basis.
My case, i need to report storage location stock for both (1)last month 06.2010 and (2)yesterday's stock 06.07.2010. So i can use MARDH table to report (1)last month stock for each storage location. While for (2) yesterday stock, table MARDH isn't help.
Could you please advice further? -
MCHB,MARD - Stock available at plant level and storage location level
Hi ,
How to determine how much stock available at Storage location level and Plant level. (Lot is not maintained).
In MCHB-Stock at lot level is shown.
In MARD-Stock at Storage Location level is shown lncluding
the stock maintaned at the lot level.
If i want to know the stock which is not maintained in Lot, i.e, Stocks directly maintained at Storage location / Plant.
Do I need to subtract the MCHB Value from MARD Value ?
Is there any other way available to find the stocks which is not maintained at lot level.
Regards
PrasathHi prashant,
What do u mean by stock maintained at SL level without batch level. Do u mean that some materials are subjected to batch management and some or not?
If that is the case, for all batch managed materials, u can see the stock at batch level and also same is summed up at SL level. But still what ever u are getting from MARD table isstock at SL level only.
If u have activated batch management for any material, it will always be shown at lot level also.
hope this clarfifies query
award points if found useful -
Storage Location level ATP check with CRM
Hi:
I am on an implemenation where the integration is between CRM, EWM and GATP. So, consider the situation where the sales order check is done through CRM and a call to GATP is made.
Some background on supply
EWM would like to receive the goods into storage location ROD (Received On Dock) and then do a movement type to move it to storage location AFS (Available For Sale). The sales orders should consider only the supply from storage location AFS and not ROD.
First question is, is it possible to do a storage location level determination in CRM? I don't think so but wanted to confirm. The reason is because even a plant determination is not possible in CRM when you integrate with GATP (the plant is determined through Rules).
Now, suppose that we have determined the storage location called AFS (in gATP through enhancement) and will do an ATP only at that level in GATP. Suppose that the first plant that will be checked is Plant A and then based on the location determination procedure, the next plant that will be checked is Plant B. When the system checks supply at Plant B, then the question is this: will it still check only at storage location AFS in Plant B or will it check at the plant level? The requirement will be to check at the same storage location level (which means that whatever process we used to determine the storage location at Plant A has to be followed for Plant B also).
One option that can be considered is to check at the Storage Location MRP Area level (there seems to be better support for RBA and Storage Location MRP Area than just storage location). See SAP Note 412314. But this is also complicated.
Another option is to not check at the storage location level but represent the various stocks with stock types (stock type ROD and stock type AFS) and only the stock type AFS will be used in the list of ATP categories.
Please share any experience that you may have in this.
Thanks,Hi Satish,
In my project also we had this requirement to determine the correct Storage location after plant has been determined by using rules.
What we did is as follows:
- We created a Z table which had entries for all plants and preferred storage locations for those plant (only one entry per plant) in your case it will be like:
Plant A - AFC
Plant B - AFC
Plant C - AFC
- We used a ATP user exit in APO to get the storage location of source plant ( which was determined in APO via rules) from the Z table.
I hope this helps.
Please let me know if you have any questions.
Thanks,
Anupam
Edited by: Anupam Sengar on Dec 20, 2011 12:03 AM -
Storage Location Level ATP check through CRM
Hi:
I am on an implemenation where the integration is between CRM, EWM and GATP. So, consider the situation where the sales order check is done through CRM and a call to GATP is made.
Some background on supply
EWM would like to receive the goods into storage location ROD (Received On Dock) and then do a movement type to move it to storage location AFS (Available For Sale). The sales orders should consider only the supply from storage location AFS and not ROD.
First question is, is it possible to do a storage location level determination in CRM? I don't think so but wanted to confirm. The reason is because even a plant determination is not possible in CRM when you integrate with GATP (the plant is determined through Rules).
Now, suppose that we have determined the storage location called AFS (in gATP through enhancement) and will do an ATP only at that level in GATP. Suppose that the first plant that will be checked is Plant A and then based on the location determination procedure, the next plant that will be checked is Plant B. When the system checks supply at Plant B, then the question is this: will it still check only at storage location AFS in Plant B or will it check at the plant level? The requirement will be to check at the same storage location level (which means that whatever process we used to determine the storage location at Plant A has to be followed for Plant B also).
One option that can be considered is to check at the Storage Location MRP Area level (there seems to be better support for RBA and Storage Location MRP Area than just storage location). See SAP Note 412314. But this is also complicated.
Another option is to not check at the storage location level but represent the various stocks with stock types (stock type ROD and stock type AFS) and only the stock type AFS will be used in the list of ATP categories.
Please share any experience that you may have in this.
Thanks,
SatishHi Satish,
In my project also we had this requirement to determine the correct Storage location after plant has been determined by using rules.
What we did is as follows:
- We created a Z table which had entries for all plants and preferred storage locations for those plant (only one entry per plant) in your case it will be like:
Plant A - AFC
Plant B - AFC
Plant C - AFC
- We used a ATP user exit in APO to get the storage location of source plant ( which was determined in APO via rules) from the Z table.
I hope this helps.
Please let me know if you have any questions.
Thanks,
Anupam
Edited by: Anupam Sengar on Dec 20, 2011 12:03 AM
Maybe you are looking for
-
Dymanic action with jQuery selector not working in version 4.2.2
Hi, We're in the process upgrading to APEX version 4.2.2. We have an issue is with a report with a link that's firing a dynamic action with a jQuery selector. The first sequence in the dynamic action is Confirm. When we click the link in the report i
-
I can't get Netflix even though it shows I paid two days ago. It's supposed to automatically renew in iTunes. Netflix says it's an Apple communication problem. They had a live person tell me so I believe them.
-
How can i convert my invoice which is in smart forms to xml file
how can i convert my invoice which is in smart forms to xml file.
-
The program can't start because MSVCP90.dll is missing
Hello, after installing Adobe PDF Test Toolkit when I would like to start the Adobe Reader this error message appears "The program can't start because MSVCP90.dll is missing". I have tried it with the following Adobe Reader Versions: - Adobe Reader X
-
Deriving ITEMCATEGORY from SHIPPING TYPE in VA01
Hi, When Ship type is selected as "DIECT SHIP" at the header level all material items on the sales order should change to item category 'YYAC'. If the ship type is chnaged to DIRECT SHIP at the line item level, then only the material lines item categ