Storage Location Level BW Stock Report
Hi Experts,
Does anybody know whether there is a BI Content report that shows storage location level stock information?
Best Regards,
FIRAT KAYIRAN
Hi all,
I know these queries based on infocube 0IC_C03. But these queries doesn't have a storage location detail. Anyway thanks for replies.
Similar Messages
-
No Stock value at Storage location level in BW report
I am facing problem in getting stock valuation at storage location level.
The problem is that, in R/3 Stock valuation is done at plant level, when we do storage location to storage location movement , only stock quantity gets changed and no FI entry is getting generated . So there is no movement of stock values at all. when we load this transaction data into BW , obviously i will arrive with wroung value . so what to do in this case ?
Thanks & Regds,
KavanHi Kavan,
Could you please explain the scenario & provide the Ds you are using.
Thanks & Regards,
Suneel -
Need to display the Stock Values at storage location level - 0IC_C03
Hi All,
I am developing Stock Movent Report on 0IC_C03 - Material Stocks/Movements.
I have more than one storage location for plant. Stock quantities are calculating at storage location level and Stock Values are calculating at plant level.
I have no issues with quantities. Only problem with Values.
2LIS_03_UM is not picking the starage location, so that the revaualtion values are falling under unassigned nodes. When i set filter on storage location these values were not showing as they are under un assigned nodes (#).
I want to get the Stock Quantity and Stock Values at Storage location level in my report.
I found that soulution for that is Applying SAP Note : How to Realize summarized display of stock values on storage
I have done development as per the document. But when i run the Query it is going to debug mode first and then it saying This program cannot display the webpage
Can any one faced the same situation, Please help me if so.
Thanks in Advance.
Gopal NHi Sachein,
I am getting this An exception(CX_RSR_PROPAGATE_X) occured when debugging, and then it leads to next screen saying that:
This program cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
What you can try:
Check your Internet connection. Try visiting another website to make sure you are connected.
Retype the address.
Go back to the previous page.
More information
Please let me know you need any more information.
Thanks in Advance
Gopal N -
Opening and closing Stock report at Storage location level- date wise
Dear all
Is there any standard report to view opening and closing stock at storage location level? ( we have MB5B which resets the entry screen if we enter SLOC details).
Thanks
SamDo I have the option of selecting Storage Location wise opening and closing stock on a particular date or period, that is what I have requested? Is it possible, evenafter selecting storageloc/batch stock and entering all the SLOCs in the selection creen, the report output does not contain any SLOC, and using ctrl+F8 or display variant does not have SLOC as a field also.
pls gudie
sam -
Stock report in BW (valuated stock and Storage Location level)
Dear All,
Regards.We got an situation here,
Case 1: R3 (MB5B) (Both "Storage loc" and "Valuated stock" shows the same Stock Qty)
1).The BW Stock Report shows values the Correct Values for "Receipt Qty" and "Issue Qty" with the Correct "Quantity total Stock" aswell.
Case 2 : R3 (MB5B) (Stock is different between "Storage Loc" and "Valuated Stock")
1).The BW Stock Report shows the "Quantity Total Stock according to VALUATED STOCK Level(MB5B),but the "Receipt Qty" and "Issue Qty" according to STORAGE LOCATION Level(MB5B) .
We followed the "How to Handle Inventory "Doc with the proper sequence of Loading of Infosources and Compression.The data is sitting fine at the cube level.
It would be great if someone can throw some Light on this issue,on how the Query shows a COMBO of both Valuated stock and Storage Location stock....Held up with this issue for quite sometime..Had a look at the Oss Note (589024)...........
Manythanks
ArunHI,
In Inventory we have two quantity fields given to satisfy the requirement.
Valuated stock Qty - 0VALSTCKQTY
Storage Location qty - 0TOTALSTCK
You can make use of them based on your requirement. Hope this helps for you.
Thanks,
Arun -
Report on QI, Blocked, Returned Stocks at Plant & Storage location level
Hi,
Would like to know any reports which gives QI, Blocked, Returned stocks at Plant & Storage location level.
Regards,
Vengathi,
What do you exactly mean say by "Returned stock"..
Also go through by MMBE tcode ...
Regards
Priyanka.P -
Opening and closing stock at storage location level
Dear all
I need a std report which will give the opening and closing stock at storage location level, Or should I go for dev. if yes please guide me.
Regards
SamuelHi,
check if you can use S_P00_07000139 report, select "Display stock movement by plant (with amount) and further select Sloc from layout.
Regards,
Vikas -
Stock valuation down to Storage location level
Dear all,
System setup for stock valuation is till Plant level. And understand that's how data stored in table MBEW and MBEWH until plant level only.
Eventhough that is system standrd, is that possible to get the stock valuation until Storage location level?
For eg: In MB5B, there is opening stock, closing stock and the material movement posting. I need to get opening and closing stock for each storage location.
Could you please comment if there are tables store these data? Kindly comment.Hi Afshad Irani,
Thanks for your reply. Understand from the previous post that stock valuation for storage location can be done via table MARDH or report MC.9, but this tools are excess base on period/month basis.
My case, i need to report storage location stock for both (1)last month 06.2010 and (2)yesterday's stock 06.07.2010. So i can use MARDH table to report (1)last month stock for each storage location. While for (2) yesterday stock, table MARDH isn't help.
Could you please advice further? -
Valuated Stocks at Storage location Level
Hi Gurus,
Our client wants to develop a report on Quantity and Value of the Stocks at Storage location level. Is there any standard table/T.code where we can see this? We have tried in the Standard reports too.
We have tried this getting from various tables like MARA,MARC,MARD,s031 & S032. But it is hitting the performance heavily. Please advice if anything can be done on this.
with regards,
SaakithyanRefer this link
http://wiki.sdn.sap.com/wiki/display/ERPSCM/StockTablesandStockTypes
check reports: MC.9 ,S_p00_07000139 also if it fits -
How to realize summarized display of stock values on storage location level
Hi all,
we have implemented in Release 3.5 a report to analyze Stock values on storage location level according to the "How to...realize summarized display of stock values on storage location level"- paper. The report is running witout problems.
Now we are going to upgrade our BW-system to release 7.01 in technical environment, we have not upgraded our reports.
Executing the report in release 7.01 we get an error message "Object field I_S_DATA-0TOTALSTCK not found"
The error is coming from line 14 Inc GET_FIELD_POSITION_D in Prog CL_EXM_IM_RSR_OLAP_BADI.
Unfortunately the document "How to... realize summarized display of stock values on storage location level" can no longer be found in SDN.
Is there any new How to - document for this kind of reporting?
Does anybody can give me advice for chances in coding?
Thank you for answers.
Best regards,
Andreas
Edited by: Andreas Förner on Dec 9, 2009 1:52 PM
I have got a solution from support.
The solution is described in note 924320.
AndreasHi,
I assume you have also created class "ZCL_IM_Z_MATERIAL_PRICE".
In the implementation of virtual InfoObjects
ZCL_IM_Z_MATERIAL_PRICE we have changed the method INITIALIZE:
OLD:
* fill the global variable
UNASSIGN <l_global>.
ASSIGN (l_global_name) TO <l_global>.
CHECK <l_global> IS ASSIGNED.
<l_global> = cl_exm_im_rsr_olap_badi=>get_field_position_d(
i_fieldnm = <l_s_sfk>-kyfnm <--
i_s_data = i_s_data ).
ENDLOOP.
NEW:
* fill the global variable
UNASSIGN <l_global>.
ASSIGN (l_global_name) TO <l_global>.
CHECK <l_global> IS ASSIGNED.
<l_global> = cl_exm_im_rsr_olap_badi=>get_field_position_d(
i_fieldnm =
<l_s_sfk>-VALUE_RETURNNM
i_s_data = i_s_data ).
ENDLOOP.
This solved our issue. Please regenerate the query after
implementing the correction.
Hope it solves you issue too.
Best regards, -
MCHB,MARD - Stock available at plant level and storage location level
Hi ,
How to determine how much stock available at Storage location level and Plant level. (Lot is not maintained).
In MCHB-Stock at lot level is shown.
In MARD-Stock at Storage Location level is shown lncluding
the stock maintaned at the lot level.
If i want to know the stock which is not maintained in Lot, i.e, Stocks directly maintained at Storage location / Plant.
Do I need to subtract the MCHB Value from MARD Value ?
Is there any other way available to find the stocks which is not maintained at lot level.
Regards
PrasathHi prashant,
What do u mean by stock maintained at SL level without batch level. Do u mean that some materials are subjected to batch management and some or not?
If that is the case, for all batch managed materials, u can see the stock at batch level and also same is summed up at SL level. But still what ever u are getting from MARD table isstock at SL level only.
If u have activated batch management for any material, it will always be shown at lot level also.
hope this clarfifies query
award points if found useful -
SIT Value and Stock value at storage location level
HI
Can anyone tell me how to get the following:
1. The value of the Stock in Transit on monthly basis
2. The value of the stock at storage location level. The Stock value is correct at plant level
Thanks in advance.
SoumenHello,
(1) please have a look into the Howto Guide:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92c0aa90-0201-0010-17b1-bf5b11c71257
(2) Please have a look into the note:
589024
And consider to use the feature Constant selection.
http://help.sap.com/saphelp_nw04s/helpdata/en/d2/02223c5f00612be10000000a11402f/content.htm
I hope this helps, Michael -
MC.9 drill down at storage location level
In mc.9 report stock against plant xxxx at storage location drilldown
I see
In total valuated stock is 0
But
at storage location 0040 I see 423.686 as valuated stock
and at storage location 5M06 I see minus 423.686 as valuated stock
Client need to have not stock at plant level.
In total I see 0
But client is bothering about valuate stock he is getting at storage location level.
Thanks,
KiranHi Jurgen,
For plant xxxx there is nil stock in mc.9 report. only I see sloc to sloc transfer of qty. for example sloc 0001 has qty + 100 & sloc 0002 has qty -100.
Finance is asking to user that this + - qty should not show in mc.9 and asking him to get it removed.
What should I suggest to user and finance.
Thanks,
Kiran -
Opening and closing balance values at storage location level
Dear all,
I want to know opening and closing balance values and receipts and issue values at storage location level for certain period.
I tried with MB5B, it is not giving value at storage location level, it is giving quantities at storage location level and values at plant level. But requirement is: please see below example:
All values are in USD
Storage location: 1001 1002
Opening Balance: 2000 3000
Receipts: 1000 2000
Issues: 2000 3000
Closing Balance: 1000 2000
Please help in this regard (I want value of the stock only, not qty)
Regads,
Veerappa
Edited by: Chinna Veerappa on Jul 27, 2010 5:27 PM
Edited by: Chinna Veerappa on Jul 27, 2010 5:28 PMvlauation is at plant level (MBEW table) the storage location level does not carry values (table MARD).
You may have to develope your own ZMB5B program and calculate yourself what is not stored in SAP. -
Storage Location level ATP check with CRM
Hi:
I am on an implemenation where the integration is between CRM, EWM and GATP. So, consider the situation where the sales order check is done through CRM and a call to GATP is made.
Some background on supply
EWM would like to receive the goods into storage location ROD (Received On Dock) and then do a movement type to move it to storage location AFS (Available For Sale). The sales orders should consider only the supply from storage location AFS and not ROD.
First question is, is it possible to do a storage location level determination in CRM? I don't think so but wanted to confirm. The reason is because even a plant determination is not possible in CRM when you integrate with GATP (the plant is determined through Rules).
Now, suppose that we have determined the storage location called AFS (in gATP through enhancement) and will do an ATP only at that level in GATP. Suppose that the first plant that will be checked is Plant A and then based on the location determination procedure, the next plant that will be checked is Plant B. When the system checks supply at Plant B, then the question is this: will it still check only at storage location AFS in Plant B or will it check at the plant level? The requirement will be to check at the same storage location level (which means that whatever process we used to determine the storage location at Plant A has to be followed for Plant B also).
One option that can be considered is to check at the Storage Location MRP Area level (there seems to be better support for RBA and Storage Location MRP Area than just storage location). See SAP Note 412314. But this is also complicated.
Another option is to not check at the storage location level but represent the various stocks with stock types (stock type ROD and stock type AFS) and only the stock type AFS will be used in the list of ATP categories.
Please share any experience that you may have in this.
Thanks,Hi Satish,
In my project also we had this requirement to determine the correct Storage location after plant has been determined by using rules.
What we did is as follows:
- We created a Z table which had entries for all plants and preferred storage locations for those plant (only one entry per plant) in your case it will be like:
Plant A - AFC
Plant B - AFC
Plant C - AFC
- We used a ATP user exit in APO to get the storage location of source plant ( which was determined in APO via rules) from the Z table.
I hope this helps.
Please let me know if you have any questions.
Thanks,
Anupam
Edited by: Anupam Sengar on Dec 20, 2011 12:03 AM
Maybe you are looking for
-
Cannot delete email from POP account
I have a POP mail account. Several emails keep coming in my inbox over and over. I have deleted them on the POP server. I have deleted them from my inbox & trash. I have rebuild my mail. I have unchecked store deleted messages on the server, saved, r
-
XMLP link or url is not worlking
Hi, I have installed obiee 11.1.1.6.0 . I am able to access analytics, console, em but not BI Publisher. When i check the servers from opmnctl all 5 servers are up and running.Can any one tell the reason why am not able to access BI Publisher url .
-
OBS not working after Installation
Hi All, I am having a had time to make OSB 10.3.0.3 x64 working on my Dell 1850 x64 machine with Windcows Server 2008 x64 on it. OK, I've done is: I do have a SCSI card attached to this server and a tape drive. All system is up to date with all lates
-
Hi, I am calling a transaction as; CALL TRANSACTION 'MM06' USING BATCH_ITAB MODE pMODE MESSAGES INTO MES_ITAB UPDATE 'S'. in BATCH ITAB: 'X' 'SAPMM03G' '0100', ' ' 'RM03G-MATNR' "any matnr, ' ' 'RM03G-WERKS' "any werks, ' ' 'RM03G-
-
How many cost centers can we assign to a org unit
can anyone pls tell me tht How many cost centers can we assign to a org unit ?? thanks waiting for reply asap