Storage location Locked in Delivery

Friends,
I have a requirement where Sloc should be protected in a delivery. What I mean by protected is that you cannot create deliveries from any other storage location but the one/two I specify? Does anybody know the whereabouts of doing this? Any advice would be appreciated. Do we need a user exit? I know that the it cannot be done by an authorization object.
Thanks

I am trying to use 'V02V0002' user exit. Will this satisfy my requirement?

Similar Messages

  • SHIPPING POINT AND STORAGE LOCATION DETERMINATION IN DELIVERY

    i made configuration setting for shipping point and storage location determination during delivery process. still system is not proposing this data during delivery.
      due to this reason lot of time is consuming during delivery creation.
    plz suggest the complete configuration flow for this determination.

    Dear Ram,
    Can you please specify the configuration that you have made? And which storage location determination rule are you using for your Delivery Type?
    Regards,
    Amitabha

  • Storage location determination in delivery

    Hi,
        In sales order for each line Item (Material) I have only one quantity.
    Which is store into the one plant (e.g. CJ01) at any one of the storage location (e.g. suppose there is JL01, JL02, JL03 storage location & my material store into one of the storage location at a time).
    But my requirement is that When I am creating Delivery that time appropriate Storage location in which material stored comes automatically into the picking .
    Can  it is possible?
    If yes then What setting I have to configure to do that?
    Please help me
    thank you

    Thank you
    Actually for my one Plant there is several storage location .
    E.g. STL1
           STL2
           STL3
    & In this Scenario For each material only one quantity.
    So
    at a time only one storage location it is available.
    My requirement is that when I am creating delivery s/m should pick up right storage location (in which material available) automatically in picking tab   .
    please help me

  • How to change the storage location while create delivery?

    Hi all:
       I have to question to trouble you,when I create a delivery with reference to a sales order,however every time it set storage location 'FG10' to the delivery automatically.I can modify it, but how to modify this default value?the sales order haven't information about storage location.
       thanks.
    Best regards
    lance

    Hi Lance
    Please try this:
    In SPRO, go to Logistics Execution - Shipping - Picking- Determine Picking location - assign picking locations
    here, for the reqmt plant and shipping point and storage conditions, define the applicable storage location. If you are not assigning any storage conditions in you material master, you may leave it blank. Storage conditions can be defined in the Material master in General Plant Data / Storage view.
    After maintaining this, try creating a delivery and see if the delivery gets created in the required storage location.
    Please reward points if this helps you
    Rgds
    Nageshwar

  • BAPI or FM to Update storage location in outbound delivery with many items

    Hello!
    I have an urgent problem.
    Storage location determination didn't work and were  created thousands of deliveries without storage location.
    We want to run LSMW using BAPI.
    Which BAPI can update storage location (for many items in delivery. We saw an option to update the first item' but not all of them)
    PLZ try to help
    thank You

    Hi,
    check this FM:
    RV_DELIVERY_PICK_UPDATE
    SD_DELIVERY_UPDATE_PICKING

  • Outbound Delivery and Storage Location

    hey everybody,
    this is our status quo:
    we create a outbound delivery based on a sales order & at the end of the creation of the delivery we are doing the goods issue immediately to do the material movement. we do that, because we need a material document for the physical packer in the storage. at the start of the physical packing he gives this material document to the person in the warehouse and this person picks the needed material.
    we need a solution for our new scenario:
    in the future we want use handling units within deliverys. in these HU's we want to pack the material included in the delivery note.
    here are the steps:
    1. outbound delivery creation
    2. we need a material movement (material document) from one storage location (A) to an other storage location (B)
    3. the packer is packing the material physical and within SAP in the new created handling units
    4. when the packing operation is finished, the packer gives information to SD person and the goods issue will be done. material movement will be done from the storage location (B).
    does anyone has an idea for us?
    another information: we don't want to do the material movement manually
    best regards & TIA
    chris

    Dear,
    As per standard SAP , once you assign the storage location in OUTBOUND DELIVERY, system will tend to pick the storage location assigned to it.
    But as per your client requirement, you need to do the transfer posting from one storage location to other storage location and then you would like to post the "Goods issue" from the new storage location.
    If it has to be done, you need to update the "Outbound delivery"  with new storage location before posting the  goods issue.
    Is there any business advantage with this new process,If  so i can suggest you one work around if you are doing transfer posting with respect to "Each out bound delivery"
    Details  as Follows:
    Step-1:
    While transferring the stock from one storage location to other storage location(Movement type:311 single step), mention the out bound delivery number in "Document header text" or "Material Slip".
    Step-2:
    Then take a report of those transfer posting documents and then update all the outbound deliveries for new storage location.To update in mass, you can set BDC with the help of ABAPER
    Step:3
    Then do "Post goods issue".
    Regards,
    pardhu

  • PO print outs having delivery address as of storage location

    Hello Experts,
    What setting need to be done to have storage location address as delivery address in PO by default.

    In your print program pass values plant and storage location in table TWLAD and in that table you will get address number .Use this address number in ADRC table and get address details in PO output form.
    Please explain above logic to your technical team and they will do program changes.

  • Storage location missing in Inbound delivery

    Hi ,
    When I am getting the ASN or confirmation for my purchase order.
    automatically Inbound delivery is getting created.
    But here the problem is missing the storage location in inbound delivery.
    I maintained the storage location determination (with situation) setup.
    could you please help me.

    The entry in OMB2 indicates that automatic creation of storage location data in the material master record at the time of the <b>first goods receipt</b> is allowed.
    As well the storage location data is only created automatically if the quantity is posted to the "normal" storage location stock. If you have goods movements to special stock (for example, to sales order stock), the data is not created.
    To my knowledge the PO generally does not have storage locations,while creating inbound delivery (manually or automatically) storage locations are copied from the material master. So, also check what S.loc. your material master has for the materials you are creating inbound deliveries.
    Regards,
    PATHIK

  • How to get delivery address in STO for the storage location

    Hi All,
    We have to create STO from the reservation using MRP run. While system is creating the STO we need to populate the storage location address as delivery address (not the plant address ). How we can do that? what are teh settings required for this setup? please hlep in that.
    Regrads,
    Khan

    Hello...
    You can select the storage location in the line item itself which is adjecent to Plant for the line item.
    Regards
    Suresh

  • STO for storage location to storage location with delivery charges

    Dear Users,
    Please advice the configuration & pre-requisites for storage to storage location STO with delivery charges within a plant.
    Thanks & Regards,
    Shyam

    Moderator message:
    Please put some efforts into a search
    Storage location to storage location stock transfers have been many times discussed as well as delivery charges in UB stock transfer order.
    Do not just post your requirements and expect others to do your job.
    If you dont know how to search, then please see these blogs:
    A good way to search the forum is with google. See this blog with details for a good search
    Getting the Most out of Google: Optimizing Your Search Queries
    This blog describes how to use the SCN search:
    How to use SCN search
    The discussions are not a replacement for proper training
    Thread locked

  • How to update storage location & batch split on delivery items?

    Any idea how to perform the following using a BAPI or function call with regards to updating a Delivery (VL02/VL02N)?
    1) Enter or update a storage location on a delivery item?
    2) Batch split a delivery item to give multiple batch    numbers. For example if delivery item is '101' then    after batch split additional delivery items with batch number assigned will appear as '900001', '900002', '900003', etc Entering a single batch number is straight forward and can be done using WS_DELIVERY_UPDATE/_2
    Do not wish to use BDC or call transaction. Any help appreciated.

    hi sailatha..
    im doing BDC for VL01N transaction.. how can i pass multiple storage locations for picking quantity..  my requirement is  if the material is not there in the specified storage location it should search in the other storage locations for delivery.
    how can i solve this issue bcoz in the VL01N screen i can pass only one storage location.
    this is urgent requirement..
    kindly revert me back if u can help.
    thankx
    helpful answer will be rewarded.

  • Split the Delivery based on Storage location

    HI all,
    How to Split the Delivery based on Storage location when creating delivery.  is  there any functional setting ?
    Thanks
    Krupali

    Hi KR and Lakshmipathi,
    I am having exactly the same requirement.  My requirement is that i need to split one Sale Order line into multiple line items in delivery based on the stock in a particular storage location at the time of delivery creation.
    Eg.
    Line item 10 in Sale order for quantity 100.
    Storage location stock  in the priority
    ST01 = 40
    ST02 = 25
    ST03 = 2000
    I wish to have 3 line items in delivery like
    Line item           Storage Location             Qty
    10                     ST01                                40
    20                     ST02                                25
    30                     ST03                                35
    I was able to do the same in the BADI LE_SHP_DELIVERY_PROC ~ SAVE_DOCUMENT_PREPARE
    But i am facing problems regarding the inconsistency in delivery document such as Picking status update etc
    Suggest if there is any better method to do.
    Thanks in advance.

  • Automatic storage location determination based on delivery document type

    Dear All,
    How can automatic storage location will be determined based on sales order type or delivery type.
    Ex: If the business sells the material storage location automatically determined as SL12.
    If the customer returnns the material storage location should be SL01.
    Please suggest for retun process automatic storage location determination.
    Best regards,
    Ramesh

    Dear Guru Lakshmipathy,
    Fine, but we have some picking rules are MALA, RETA and MARE.
    Currently we have onle on plant 1010 and shipping point 1010.
    storage location for outbound deliveries determined based on MALA rule has been assigned to LF.
    can we use RETA or MARE to determine the storage location for returns delivery.  If yes kindly
    explain. And where is storage condtion available in sap.
    Best regards,
    Thanks

  • Two storage location concept in EWM AFS ROD.

    Hi Experts,
    This post looks very old so opening a new thread.
    http://forums.sdn.sap.com/thread.jspa?threadID=1563967
    As mentioned I would like to know the working of AFS and ROD storage locations in EWM.
    ROD -- F1 Unrestricted in putaway  ,      AFS -- F2  -- Available for sale.
    1. I can perform goods receipt for both the storage location using inbound delivery.
                  For  ROD  stock will go to stock type F1
                  For   AFS stock will go to stock type  F2.
    2. As per the information I can not perform goods issue from ROD ie I can not create a Outbound delivery to issue the goods from ROD storage location.
    3. If any goods issue is needed I should transfer the goods from ROD storage location Stock type F1 to AFS storage location in EWM, may be by transfer posting.
    Does these points make sense ?
    Regards
    Shashank
    Edited by: Shashank Balooni on Aug 11, 2011 2:47 AM

    Self:
    In EWM we have to use two storage locations : 0001 (ready on dock ) and 0002 (available for sale )...
    In configuration ewm : availibility group 001 + 0001 and  availibility group 002 + 0002
                                     availibility group 001 + F1 and  availibility group 002 + F2
    Create delivery and confirm the warehouse task : stock moves to 001  F1 , Storage type maintained in Warehouse process type  > and this will trigger receipt in 0001 at IM
    Later when the goods receipt is posted in EWM from delivery the stock will move from 001 / F1 to 002/ F2 in 0002 store in IM
    Hope this helps !
    shashank

  • Picking quantity from a different storage location during batch split??

    Hi Gurus,
    Have an issue with doing batch split in a delivery with batches from several storage locations.
    Have delivery XXXXXX where I want to pick batches from several different storage locations.
    I click on the batch split button and select the different batches and quantitys.
    The issue here is that I would like to have the different storage locations entered automatically based on the selection of the batch I have made.
    The only storage location that is entered here or possible to be entered is the defaulted storage location that is in the first screen...
    My question is why can I get the storage location where the batch is located and acctually exists when I do select the batch in the batch split...
    The table LIPS and LGORT is not filed with the storage location so I do not know how I could fill this field with the correct storage location data...
    Thank You for all Your help!
    BR,
    Christian

    Hi Christian,
    you have not jet got an answer  -- here my suggestion.
    You have to use the Userexit Mv50afz1. Here you can do some checks and  you can do a popup, where you can sign the LGORT, where the batch is.
    In any case, you need an ABAPer
    In documentation, there is signed, that you should not change database other as Save_prepare - and that's too late.
    In one solution at my company, i show in a message the right information. In an other solution, i made a modification of table lips.
    But dont change the index of the current lips/xlips. That may have the effect of incorrest LIS - System.
    If nessesary create an ylips- Line of the position.
    Use an assign-command to avoid the change of the index.
    hans

Maybe you are looking for