Storage location material status

Hi,
I wanted to ask if anyone knows if / how can we maintain storage location - material status.
I mean to use the same functionality of plant material status which determines which of the logistic processes a specific material participate in.
We need the same thing but at storage location level. The reason is, that at some times several storage locations are going through a (physical) change, e.g. redecoration.. and we need to "block" them for some processes like, stock transfer, purchase requisitions... and so on...
Regards,
Doron Oded.

Hi,
Well, thanks for your answer, but it is insufficient..
We need to block the storage location for processes which are not necesseraly manual, like MRP, ATP, and in places where there is no check at storage location level - Logistic execution (deliveries, shipments), Purchasing... and so on..
If for example, a storage location is damaged due a storm, or any other act of god (or man).. We need to block it to all logistic processes. The question is - what is the best way..?
Thanks,
Doron Oded.

Similar Messages

  • MRP4 view exclude storage location & material provided by vendor/customer..

    Hi
    Could anyone please tell me in MRP4 view for a material,where is the option so that i can exclude or include the storage location stock from MRP?
    and also in which T code i should indicate the material is provided by vendor/material provided by customer?In CS01wher's this option?
    Please help me
    Thanks & regards
    Raj

    Hi Karthik,
    MRP area is nothing to do with storage locations settings in MRP4 view. If you want to activate MRP area and use the MRP run at MRP area level then you have to customized MRP area either at storage location level or sub-contractor level (in MRP master data settings )... then you need to assign this MRP1 view of the material and with valid MRP type.  Now when you run the MRP then planning will be carried out at this MRP area for this part.
    With storage location indicators in MRP4 view (must enter with putting the stoarge location values from MM02/MM03) you can exclude the stock of this storage location (indicator 1) in the palnning run or you can plan seperately with indicator2 with using re-order level. Here no need of MRP area.
    If helps rewards points.
    Regards
    TAJUDDIN

  • UD for a Material in HU-Storage location

    Hi Gurus,
    I have situation where Stock posting tab is not coming while doing the UD for a material
    Process flow is below:
    1. Creation/Release of Process - Inspection lot get created since early lot creation status REL CALC
    2. GR of Process Order is done in MIGO in Hu storage location
    3. Inbound Delivery is created (WM integration)
    4. Inbound Delivery is processed with TR creation/Confirmation
    5. Stock can be seen in Q under HU active storage location & Material document is created in IM . Inspection lot status is same
    6. Result recording is done against Lot Status INSP RREC
    7. While doing UD. Tab for Stock posting is missing. Status UD   ICCO CLAS STUP
    This inspection type has following settings: - tick post to insp stock, Insp with task list , early lot creation , auto UD etc
    Not sure what I am missing some settings since that is HU storage location
    Please guide
    Thanks,
    Ishwar

    Hi Yogini,
    Thanks for that .
    I tested as per suggestion but that is also not working basically no inspection lot is getting created for the GR after completion of WM transaction
    I have tested my senerio for non-HU storage location (doing GR in no-HU storage location ) & that works correctly . After UD i was able to see tab for stock posting & stock get posted successfully
    I think need expert advice who has work on QM-WM integration part ... can we able to post the stock from Quality stock from HU storage location to unrestricted use using only IM transaction ( QA11/12 ) or do i need to perform some additional steps in WM ?
    Thanks,
    Ishwar

  • Storage Location In Goods Receipt.

    Hi experts!
    In automatic goods receipt for Production Orders, the storage location to the good movements is defined in material master (MRP2 - Production Storage Location), and copied to Production Order during the creation.
    I have some semi-finished materials that can be used to produce more then one finished materials, where the goods issue for this material are executed in diferent storage location. I want that the storage location to SFP goods receipt is defined in accordance with your use in the next production line (FP).
    Example:
    Material 10 (SFP). This material is component of the material 20 (FP) and material 30 (FP). In production of the material 20, the goods issue storage location is A. In production of the material 30, the goods issue storage location is B. If the Production Order of the material 10 is created to reservation of the Material 20, the storage location defined in Production Order of the material 10 is A. If reservation of the material 30, storage location B.
    In short, i want know that is possible change the goods receipt storage location automatically, looking the next Production Order goods issue storage location.
    MTS Environment.
    Picking by MF60 is not a option, we need send the material directly to the next goods issue storage location.
    Any suggestion?
    Thanks a lot.
    Best Regards,
    RMS

    Hi,
    I can think of three things to check which determines storage location automatically.
    Please go through each of these things and check what is applied to your scenario.
    1) Check whether you have given production storage location in MRP2 view of material.
    If you maintain prod sto loc at material level of SFP, it will be copied to all the production orders for all the FPs.
    e.g. for Material 10 (SFP) you maintained prod stor loc (Lets say A sto loc) at MRP2 view, Sto loc A will be copied to all the production orders of both FPs Material 20 and Material 30.
    2) Check whether in the work center you have assigned a supply area, supply area is usually assigned to storage location.
    3) Check BOM of that material, go in to each of the component details and go to "Status/long text" tab and check whether you have assigned supply area or production storage location.
    If you maintain it at the BOM item level, sto loc will be copied from here.
    e.g.
    In BOM details of Material 20 (FP), go to BOM Item details of Material 10 (SFP) and maintain sto loc A in  supply area or production storage location of Status/long text" tab.
    It will copy prod sto loc A for all the production order of Material 20 (FP)
    In BOM details of Material 30 (FP), go to BOM Item details of Material 10 (SFP) and maintain sto loc B in  supply area or production storage location of Status/long text" tab.
    It will copy prod sto loc B for all the production order of Material 30 (FP)
    I think this is what you want, you can maintain diff sto locations in BOM as explained above, It should solve your issue.
    I hope this explanation is sufficient to solve your problem.
    Do revert in case you need more explanation.
    Regards,
    Abhay Kapase
    Edited by: AbhayKapase on Aug 7, 2011 7:38 AM

  • WRONG STOCK DISPLAY AT STORAGE LOCATION LEVEL

    Hello to All,
           I've made stock transfer within plant using Mvt. 311, & now when I'm disaplaying storage loc. data in MMBE, MM03 & MC.5, it is showing negative stock for storage location from which it is transferred along with stock value as negative.
       As per IMG settings, negative stock is not allowed also not in the material master. Pls. guide me how to correct this stock, is it related to LIS updation, if yes then what is it's procedure.
    Thanks
    Amit

    If in MMBE, system is showing negative stock then negative stock has to be allowed for that plant, storage location & material.
    Pl check & confirm using following path.
    IMG -> Material Management -> Inventory Management & Physical Inventory -> Goods Issue / Transfer postings -? Allow negative stock.
    Regards
    Bhavesh Mistry

  • Automatically creation of storage location for material, in MF60

    Hi all,
    my collegue of PP module uses MF60 transaction.
    When he puts XXXX as Replenishment storage location, the system tells him this error: To stge loc. XXXX does not exist for material M1010000182 in plant 0001.
    In MM i have activate the automatic creation of storage location for plant 0001 and for all movement types.
    Why MF60 does not respect this requirement?
    If I try to do movement type 311 with MIGO, manually, there's no problem to transfer the material from a storage location to , XXXX s.loc.
    Is there something more that I have to do?
    Thanks in advance!
    Best regards
    Alba

    Thanks a lot...
    the note says:
    Summary
    Symptom
    A material without storage location view exists.
    If within a single material document, this material is moved in such a way that no change in stock occurs in total, the system does not create a storage location automatically even if this is set in Customizing.
    Additional key words
    OMC3, XLAUT
    Cause and prerequisites
    All postings to a segment (for example, material, plant, storage location) are only executed if a change in stock occurs. Only in this case, storage locations are created automatically. This way it is made sure that no empty segments are created.
    Solution
    The system behaves correctly.
    Header Data
    Release Status:     
    Released on:     07.07.2000  22:00:00
    BUT why IF i do 311 in MIGO, system creates automatically storage location (also if no change in stock occurs in total).
    AND if doMF60  (that does mouvement 311), system does not create automatically the storage location?
    Best regards
    Alba

  • Can we block a material for particular storage location ?

    We can allow material to storage locations by MMSC. Can we block a material for particular storage location ?
    Please share ur view.

    Hi,
    If you want a material to be blocked, go to the Basic data 1 view of the material,there in the genral data you have " X-plant material status ". Also in Cost estimate 1 view of the material you have Plant Specific Material status. Use the options available to block the material in these two views.
    Also u can goto MM06 where put material,plant,storage location.When u select enter just tick the check box of material,plant and storage location and save it.
    Pls reward if found useful.
    Regards,
    Indranil
    Message was edited by:
            INDRANIL BHATTACHARYYA

  • Material is blocked in Plant and storage location due to Physical Inventory

    Dear Experts,
    Our user trying "Post goods issue against 201 movement type,but its giving error message
    "Batch DOM-S(NE) of material 7503020004 is blocked in plant 2000, storage 
       location 2101 due to a physical inventory".     
    we are not using any physical inventory here,give me sugestion.
    i checked physical inventory document MI22,here its doc.status is active.how to solve this issue.    
    Thanks in Advance
    varun

    >
    madhu varun tirupati wrote:
    > Dear Experts,
    > Our user trying "Post goods issue against 201 movement type,but its giving error message
    > "Batch DOM-S(NE) of material 7503020004 is blocked in plant 2000, storage 
    >    location 2101 due to a physical inventory".     
    > we are not using any physical inventory here,give me sugestion.
    >
    > i checked physical inventory document MI22,here its doc.status is active.how to solve this issue.    
    >
    >
    > Thanks in Advance
    >
    > varun
    >
    madhu varun tirupati wrote:
    > Dear Experts,
    > Our user trying "Post goods issue against 201 movement type,but its giving error message
    > "Batch DOM-S(NE) of material 7503020004 is blocked in plant 2000, storage 
    >    location 2101 due to a physical inventory".     
    > we are not using any physical inventory here,give me sugestion.
    >
    > i checked physical inventory document MI22,here its doc.status is active.how to solve this issue.    
    >
    >
    > Thanks in Advance
    >
    > varun
    Dear Experts,
    We have a simulation in our quality server,even though a physical inventory document is existed for the material,doc  status showing active in MI22,but its allowing me to issue goods,but its not allowing in our production system.
    please give

  • BLock  Storage Location for Material

    Hi experts,
    Some Unwanted storage location exists for some materials .  I want to to block them for transfer posting .  I tried to do it thru MM06.  It is only giving warning msg but not an  error msg.
    Please suggest.
    Regards,
    ( Rajneesh Gulati )

    Dear,
    Please Set storage location level deletion flag in material master.
    Than GO,
    SPRO -> Materials Management -> Inventory Management and Physical Inventory -> Define Attributes of System Messages.
    Click on Settings for System Messages.
    Change Status W to E for Message Number M7 127 - Material & & & flagged for deletion.
    Than try to make material document.
    You can't do it.
    Regards,
    Mahesh Wagh.

  • Block Storage Location for Material Movement

    Dear MM Gurus,
    pl let us know how to block storage location for a material in Plant.
    Requirement is transfer posting (MIGO)  should not allow by using 311 mov type in sloc, error message to receive.
    example ;
    material ; 5000
    sloc ; 0001
    sloc ; 0002
    migo-transfer posting should not happen by using 311
    5000
    0001 - to 0002
    we want to block sloc-0002, how to block sloc, pl help if any solution available.
    thanx in advance
    regards
    srihari

    Hi,
    You can block the material completely for any movement type by checking <b>X Plant matl status</b> in Basic data view of material master.Or if you want to block specific movement type it will have to done thro authorisation but will apply to all materials .Here the authorisation object  M_MSEG_LGO    can be worked to remove the movement type or storage loaction .
    Dhruba

  • Report for material documents with storage location

    Hi gurus,
    I would like to know if there is a report to display material documents but in the same screen display storage location from and storage location dest.
    Thanks for your help.
    Regards.

    Hi,
    You can use MB51 or MB59 with customised layout selection for your requirement.
    With regards,
    Ajay.

  • Link material to profit center at storage location level

    Hello,
    I have one plant 0001,  two storage location assigned to this plant (MAG1, MAG2).
    In " MAG1", I am keeping the consignment stock (stock blongs to my vendor), hence when I create the material at the storage location I need that profit center be set to PF1
    "MAG2" is my own stock location, so when I create material at MAG2 level, I need that profit center be set as PF2.
    Does standard SAP allows such scenario.
    Is there any possibility to map this scenario
    Many thanks for your help
    Meher Souayeh

    Dear,
    Basically GUIXT script work mainly from Technical point of view..
    Here they can write codes accordinly so that if you want to make any sort of changes in the application or if you want to put some restriction parameters then by writing codes, it is very much possible to get the desired output.
    Hope this clears your doubt.
    Utsav

  • Material deletion flag at storage location level is not working

    I have a material that is created in some plants and also in some storage locations within each plant. If I mark the deletion flag at plant level I am not able to create a PO -> Me051 error message appears. Whereas if I mark the deletion flag at storage location level nothing appens. I am able to create a PO and also to create to goods receipt. Is there any customization that I should do in order to get the error message?
    Thanks in advance.

    storage location level deletion flag is not checked at order creation.
    it is assumed that you can change the storage location when you do the receipt.
    MRP run is at plant level, so the requirement is valid even the storage location view is flagged for deletion.

  • Material stagging at storage location level

    Hi Guys,
    When i do material stagging at storage location level (MF60) material moved from one storage location to another storage location 311 and material document is created in system .
    I want to do it through two steps that is material issue from one location and receipt in other location
    how to do it , what configuration need to be done .
    I do not have in WM in scope of implementation.
    Thanks and regards
    Thamizhchelvan G

    Dear,
    The movement type 313 removes the stock from the first storage location and in conjunction with this movement type yuo use Movemnt type 315 which in turn places the material in the receiving storage location.
    In OMBA you will see Goods Issue Doc Type..
    If you click that in the next screen , you will find Tcodes & Doc Type...
    Now Go to that T code & Press F4 in the Movement types filed...
    So the Above Doc type is applicable to those Mvt types..
    These transactions are attached to the Movment types in OMJJ transaction, select the movment type click on Allowed transactions page.
    So based on the transaction attched to the Movement type the document type is determined for the Movement types.
    Hope clear to you.
    Regards,
    R.Brahmankar

  • Material Stock at storage location for particular date!

    Dear Friend,
    I need a table or bapi which gives stock for particular storage location on particular day. That is MMBE and if you go into detail list (shift+f7). I want same thing.
    I have tried in MARD table, but it gives stock of a material for most current date.
    Waiting for your early Reply.
    Regards,
    Bhavin Shah

    hi check:
    MB_ADD_PURCHASE_ORDER_QUANTITY
    Regards
    Ashok P

Maybe you are looking for