Storage Location Prompt (F4) Not Working

Hello,
I have added several storage locations in the extended attributes in PPOMA_BBP. However, when in the shopping cart, I cannot prompt for a list of values.  The list of values display pop-up does not show nor does a 'No values found' pop-up show. 
What did I miss?  Oh, and yes I did a BBP_LOCATIONS_GETALL earlier.
Thank you in advance for any assistance.
Dean.

Hi,
Check the following points:
-The storage location's plant is also affected to the user as an extended attribute
-The plant's company correponds to the user's company code (function tab at the company org level correctly filled)
-The logical system of the storage location corresponds to the log syst. where the following document (PO or PR) is to be created
Hope it helps.
Vadim

Similar Messages

  • Material deletion flag at storage location level is not working

    I have a material that is created in some plants and also in some storage locations within each plant. If I mark the deletion flag at plant level I am not able to create a PO -> Me051 error message appears. Whereas if I mark the deletion flag at storage location level nothing appens. I am able to create a PO and also to create to goods receipt. Is there any customization that I should do in order to get the error message?
    Thanks in advance.

    storage location level deletion flag is not checked at order creation.
    it is assumed that you can change the storage location when you do the receipt.
    MRP run is at plant level, so the requirement is valid even the storage location view is flagged for deletion.

  • IPhone 6 location services/gps not working

    Anyone else have an issue with iPhone 6 location services/gps not working? I have had it happen to me twice where it stopped working for good 7 or 8 hours and then all of sudden it starts working again. For example, directions don't work, every time I open Apple Maps it will say "Cannot determine location", then when I press the location icon on the bottom left, it will try to search again and have an approximate location but not exact, where as the iPad that I have right next to it is able to pin point the exact location. Sometimes the location circle is pulsing blue sometimes its gray. If I am driving and have tracking on it won't track, and so on.  I have tried to setup the phone as new without restoring the backup, when it stopped working with no luck, it still didn't work. I went and restore it back from backup and few hours later it started to work again. This has happened twice now since I got the phone last Friday.

    Check your "Privacy" settings on your iPhone see what apps are using your location.

  • Storage location Data is not saving in table MARD using BAPI method.

    Hi Experts,
    TABLES: T001L, "Storage Locations
            MARA,  "General Material Data
            MAKT,  "Material Descriptions
            MBEW,  "Material Valuation
            MARC,  "Plant Data for Material
            MARD.  "Storage Location Data for Mate
    DATA: BAPI_HEAD   LIKE BAPIMATHEAD,  "MATERIAL
          BAPI_MAKT   LIKE BAPI_MAKT,    "Material Description
          BAPI_MARA1  LIKE BAPI_MARA,    "Client Data
          BAPI_MARAX  LIKE BAPI_MARAX,
          BAPI_MARC1  LIKE BAPI_MARC,    "Plant View
          BAPI_MARCX  LIKE BAPI_MARCX,
          BAPI_MBEW1  LIKE BAPI_MBEW,    "Accounting View
          BAPI_MBEWX  LIKE BAPI_MBEWX,
          BAPI_MARD1  LIKE BAPI_MARD,    "Storage location
          BAPI_MARDX  LIKE BAPI_MARDX,
          BAPI_RETURN LIKE BAPIRET2.
    DATA: BEGIN OF INT_MAKT OCCURS 100.
            INCLUDE STRUCTURE BAPI_MAKT.
    DATA: END OF INT_MAKT.
    DATA: BEGIN OF INT_MAT OCCURS 100,
             WERKS(4),     "Plant
             LGORT(4),     "Storage location
             MTART(4),     "Material type
             MATNR(18),    "Material number
             MAKTX(40),     "Material description
             MATKL(9) ,    "Material group
             MBRSH(1),     "Industry sector
             MEINS(3),     "Base unit of measure
             GEWEI(3),     "Weight Unit
             SPART(2),     "Division
             EKGRP(3),     "Purchasing group
             VPRSV(1),     "Price control indicator
             STPRS(12),    "Standard price
             PEINH(3),     "Price unit
             SPRAS(2),     "Language key
             BKLAS(4),     "VALUATION CLASS
             VERPR TYPE VERPR_BAPI,    "MOVING PRICE
             BWTTY(1),     "Valuation Catogory
             MLAST(1),     "Price determination
             MLMAA(1),     "Material Ledger
             EKLAS(4),     "Valuation Class for sales order stock
             QKLAS(4),     "Valuation Class for Project Stock
             ZKPRS TYPE DZKPRS, "Future price
             ZKDAT TYPE DZKDAT, "Valid From Date
             BWPRS TYPE BWPRS,  "Tax price 1
             BWPS1 TYPE BWPS1,  "Tax price 2
             VJBWS TYPE VJBWS,  "Tax price 3
             ABWKZ TYPE ABWKZ,  "Devaluatin indicator
             BWPRH TYPE BWPRH,  "Commercial price 1
             BWPH1 TYPE BWPH1,  "Commercial price 2
             VJBWH TYPE VJBWH,  "Commercial Price 3
             XLIFO(1),          "LIFO/FIFO revelant
             MYPOL(4),          "Pool no for LIFO
             MMSTA(2),          "Plant specific material status
             AUSME TYPE AUSME,  "Unit of issue
             QMATA(6),          "Material Authorization group
             RBNRM(9),          "Catalog Profile
             WEBAZ TYPE WEBAZ,  "Goods reciept processing time in days
             PRFRQ TYPE PRFRQ,  "Recurring Insepction
             SSQSS(8),          "QM Control key
             QZGTP(4),          "Certificate Type
             QSSYS(4),          "Required QM system for vendor
           END OF INT_MAT.
    DATA: V_MATNR TYPE MARA-MATNR.
    SELECT-OPTIONS:
                PLANT    FOR  MARC-WERKS OBLIGATORY MEMORY ID PLT,
                S_LGORT  FOR  MARD-LGORT MEMORY ID STL,
                MATERIAL FOR  MARA-MATNR MEMORY ID MAT,
                MATLTYPE FOR  MARA-MTART MEMORY ID MTY,
                DIVISION FOR  MARA-SPART MEMORY ID DIV.
    PARAMETERS:  F_FILE LIKE RLGRAP-FILENAME
                 DEFAULT 'C:\DATA\ZMATERIAL.XLS' MEMORY ID F_FILE,
    GETDATA AS CHECKBOX, "Tick to download materials data to local harddisk
             UPDDATA AS CHECKBOX. "Tick to update date to Materials Master
    IF GETDATA = 'X'.
       PERFORM DOWNLOAD_DATA.
       PERFORM DOWNLOAD_FILE.
    ENDIF.
    IF UPDDATA = 'X'.
       PERFORM UPLOAD_FILE.
       PERFORM UPDATE_MM.
    ENDIF.
    FORM DOWNLOAD_DATA.
    SELECT * FROM MARC  WHERE LVORM EQ ' '
                          AND WERKS IN PLANT
                          AND MATNR IN MATERIAL.
        CLEAR MARA.
        SELECT SINGLE * FROM MARA WHERE MATNR =  MARC-MATNR.
        CHECK MATLTYPE.
        CHECK DIVISION.
        CLEAR MBEW.
        SELECT SINGLE * FROM MBEW WHERE MATNR =  MARC-MATNR
                                    AND BWKEY =  MARC-WERKS.
        CLEAR MAKT.
        SELECT SINGLE * FROM MAKT WHERE SPRAS =  'EN'
                                    AND MATNR =  MARC-MATNR.
        CLEAR MARD.
        SELECT SINGLE * FROM MARD WHERE WERKS IN PLANT
                                  AND   LGORT IN S_LGORT.
        WRITE:/ MARC-WERKS,    "Plant
                MARD-LGORT,    "Storage location
                MARA-MTART,    "Material type
                MARA-MATNR,    "Material number
                MARA-MATKL,    "Material group
                MARA-MBRSH,    "Industry sector
                MARA-MEINS,    "Base unit of measure
                MARA-GEWEI,    "Weight Unit
                MARA-SPART,    "Division
                MARC-EKGRP,    "Purchasing group
                MBEW-VPRSV,    "Price control indicator
                MBEW-STPRS,    "Standard price
                MBEW-PEINH,    "Price unit
                MBEW-BKLAS,    "VALUE CLASS
                MAKT-SPRAS,    "Language key
                MBEW-BKLAS,    "Valuation Class
                MBEW-VERPR,    "Moving price
                MAKT-MAKTX,    "Material description
                MBEW-BWTTY,    "Valutaion Catogorey
                MBEW-MLAST,    "Price Determination
                MBEW-MLMAA,    "Material Ledger
                MBEW-EKLAS,    "Valuation class for Sales order stock
                MBEW-QKLAS,    "Valutaion Class for Project Stock
                MBEW-ZKPRS,    "Future Price
                MBEW-ZKDAT,    "Valid From Date
                MBEW-BWPRS,    "Tax price 1
                MBEW-BWPS1,    "Tax price 2
                MBEW-VJBWS,    "Tax price 3
                MBEW-ABWKZ,    "Devaluatin indicator
                MBEW-BWPRH,    "Commercial price 1
                MBEW-BWPH1,    "Commercial price 2
                MBEW-VJBWH,    "Commercial Price 3
                MBEW-XLIFO,    "LIFO/FIFO revelant
                MBEW-MYPOL,    "Pool no for LIFO
                MARC-MMSTA,    "Plant specific material status
                MARC-AUSME,    "Unit of issue
                MARC-QMATA,    "Material Authorization group
                MARA-RBNRM,    "Catalog Profile
                MARC-WEBAZ,    "Goods reciept processing time in days
                MARC-PRFRQ,    "Recurring Insepction
                MARC-SSQSS,    "QM Control key
                MARC-QZGTP,    "Certificate Type
                MARC-QSSYS.    "Required QM system for vendor
                INT_MAT-WERKS = MARC-WERKS.    "Plant
                INT_MAT-LGORT = MARD-LGORT.    "Storage Location
                INT_MAT-MTART = MARA-MTART.    "Material type
                INT_MAT-MATNR = MARA-MATNR.    "Material number
                INT_MAT-MAKTX = MAKT-MAKTX.    "Material description
                INT_MAT-MATKL = MARA-MATKL.    "Material group
                INT_MAT-MBRSH = MARA-MBRSH.    "Industry sector
                INT_MAT-MEINS = MARA-MEINS.    "Base unit of measure
                INT_MAT-GEWEI = MARA-GEWEI.    "Weight Unit
                INT_MAT-SPART = MARA-SPART.    "Division
                INT_MAT-EKGRP = MARC-EKGRP.    "Purchasing group
                INT_MAT-VPRSV = MBEW-VPRSV.    "Price control indicator
                INT_MAT-STPRS = MBEW-STPRS.    "Standard price
                INT_MAT-PEINH = MBEW-PEINH.    "Price unit
                INT_MAT-SPRAS = MAKT-SPRAS.    "Language key
                INT_MAT-BKLAS = MBEW-BKLAS.    "VALVATION CLASS
                INT_MAT-VERPR = MBEW-VERPR.    "MOVING price
                INT_MAT-BWTTY = MBEW-BWTTY.    "Valutaion Catogorey
                INT_MAT-MLAST = MBEW-MLAST.    "Price Determination
                INT_MAT-MLMAA = MBEW-MLMAA.    "Material Ledger
                INT_MAT-EKLAS = MBEW-EKLAS.    "Valuation class forS.O Stock
                INT_MAT-QKLAS = MBEW-QKLAS.    "Valutaion Class for Project
                INT_MAT-ZKPRS = MBEW-ZKPRS.    "Future Price
                INT_MAT-ZKDAT = MBEW-ZKDAT.    "Valid From Date
                INT_MAT-BWPRS = MBEW-BWPRS.    "Tax price 1
                INT_MAT-BWPS1 = MBEW-BWPS1.    "Tax price 2
                INT_MAT-VJBWS = MBEW-VJBWS.    "Tax price 3
                INT_MAT-ABWKZ = MBEW-ABWKZ.    "Devaluatin indicator
                INT_MAT-BWPRH = MBEW-BWPRH.    "Commercial price 1
                INT_MAT-BWPH1 = MBEW-BWPH1.    "Commercial price 2
                INT_MAT-VJBWH = MBEW-VJBWH.    "Commercial Price 3
                INT_MAT-XLIFO = MBEW-XLIFO.    "LIFO/FIFO revelant
                INT_MAT-MYPOL = MBEW-MYPOL.    "Pool no for LIFO
                INT_MAT-MMSTA = MARC-MMSTA.    "Plant specific material
                INT_MAT-AUSME = MARC-AUSME.    "Unit of issue
                INT_MAT-QMATA = MARC-QMATA.    "Material Authorization group
                INT_MAT-RBNRM = MARA-RBNRM.    "Catalog Profile
                INT_MAT-WEBAZ = MARC-WEBAZ.    "Goods reciept processing
                INT_MAT-PRFRQ = MARC-PRFRQ.    "Recurring Insepction
                INT_MAT-SSQSS = MARC-SSQSS.    "QM Control key
                INT_MAT-QZGTP = MARC-QZGTP.    "Certificate Type
                INT_MAT-QSSYS = MARC-QSSYS.    "Required QM system for
                APPEND INT_MAT.
                CLEAR  INT_MAT.
    ENDSELECT.
    ENDFORM.
    FORM DOWNLOAD_FILE.
    call function 'WS_DOWNLOAD'
      EXPORTING
        FILENAME                      = F_FILE
        FILETYPE                      = 'DAT'
      FILETYPE                      = 'WK1'
      tables
        data_tab                      = INT_MAT
      EXCEPTIONS
        FILE_OPEN_ERROR               = 1
        FILE_WRITE_ERROR              = 2
        INVALID_FILESIZE              = 3
        INVALID_TYPE                  = 4
        NO_BATCH                      = 5
        UNKNOWN_ERROR                 = 6
        INVALID_TABLE_WIDTH           = 7
        GUI_REFUSE_FILETRANSFER       = 8
        CUSTOMER_ERROR                = 9
        OTHERS                        = 10.
    IF SY-SUBRC = 0.
       FORMAT COLOR COL_GROUP.
       WRITE:/ 'Data Download Successfully to your local harddisk'.
       SKIP.
    ENDIF.
    ENDFORM.
    FORM UPLOAD_FILE.
    call function 'WS_UPLOAD'
      EXPORTING
        FILENAME                      = F_FILE
        FILETYPE                      = 'DAT'
      FILETYPE                      = 'WK1'
      tables
        data_tab                      = INT_MAT
      EXCEPTIONS
        FILE_OPEN_ERROR               = 1
        FILE_WRITE_ERROR              = 2
        INVALID_FILESIZE              = 3
        INVALID_TYPE                  = 4
        NO_BATCH                      = 5
        UNKNOWN_ERROR                 = 6
        INVALID_TABLE_WIDTH           = 7
        GUI_REFUSE_FILETRANSFER       = 8
        CUSTOMER_ERROR                = 9
        OTHERS                        = 10.
    IF SY-SUBRC = 0.
       FORMAT COLOR COL_GROUP.
       WRITE:/ 'Data Upload Successfully from your local harddisk'.
       SKIP.
    ENDIF.
    ENDFORM.
    FORM UPDATE_MM.
    LOOP AT INT_MAT.
    CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
      EXPORTING
        INPUT              = INT_MAT-MATNR
    IMPORTING
       OUTPUT             = INT_MAT-MATNR
    EXCEPTIONS
      LENGTH_ERROR       = 1
      OTHERS             = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Header
        BAPI_HEAD-MATERIAL        = INT_MAT-MATNR.
        BAPI_HEAD-IND_SECTOR      = INT_MAT-MBRSH.
        BAPI_HEAD-MATL_TYPE       = INT_MAT-MTART.
        BAPI_HEAD-BASIC_VIEW      = 'X'.
        BAPI_HEAD-PURCHASE_VIEW   = 'X'.
        BAPI_HEAD-ACCOUNT_VIEW    = 'X'.
    Material Description
        REFRESH INT_MAKT.
        INT_MAKT-LANGU           = INT_MAT-SPRAS.
        INT_MAKT-MATL_DESC       = INT_MAT-MAKTX.
        APPEND INT_MAKT.
    Client Data - Basic
        BAPI_MARA1-MATL_GROUP     = INT_MAT-MATKL.
        BAPI_MARA1-BASE_UOM       = INT_MAT-MEINS.
        BAPI_MARA1-UNIT_OF_WT     = INT_MAT-GEWEI.
        BAPI_MARA1-DIVISION       = INT_MAT-SPART.
        BAPI_MARAX-MATL_GROUP = 'X'.
        BAPI_MARAX-BASE_UOM   = 'X'.
        BAPI_MARAX-UNIT_OF_WT = 'X'.
        BAPI_MARAX-DIVISION   = 'X'.
    Plant - Purchasing
        BAPI_MARC1-PLANT      = INT_MAT-WERKS.
        BAPI_MARC1-PUR_GROUP  = INT_MAT-EKGRP.
        BAPI_MARC1-PUR_STATUS = INT_MAT-MMSTA.
        BAPI_MARC1-ISSUE_UNIT = INT_MAT-AUSME.
        BAPI_MARC1-QM_AUTHGRP = INT_MAT-QMATA.
        BAPI_MARC1-GR_PR_TIME = INT_MAT-WEBAZ.
        BAPI_MARC1-INSP_INT   = INT_MAT-PRFRQ.
        BAPI_MARC1-CTRL_KEY   = INT_MAT-SSQSS.
        BAPI_MARC1-CERT_TYPE  = INT_MAT-QZGTP.
        BAPI_MARC1-QM_RGMTS   = INT_MAT-QSSYS.
        BAPI_MARCX-PLANT      = INT_MAT-WERKS.
        BAPI_MARCX-PUR_GROUP  = 'X'.
        BAPI_MARCX-PUR_STATUS = 'X'.
        BAPI_MARCX-ISSUE_UNIT = 'X'.
        BAPI_MARCX-QM_AUTHGRP = 'X'.
        BAPI_MARCX-GR_PR_TIME = 'X'.
        BAPI_MARCX-INSP_INT   = 'X'.
        BAPI_MARCX-CTRL_KEY   = 'X'.
        BAPI_MARCX-CERT_TYPE  = 'X'.
        BAPI_MARCX-QM_RGMTS   = 'X'.
    Accounting 1
        BAPI_MBEW1-VAL_AREA      = INT_MAT-WERKS.
        BAPI_MBEW1-PRICE_CTRL    = INT_MAT-VPRSV.
        BAPI_MBEW1-STD_PRICE     = INT_MAT-STPRS.
        BAPI_MBEW1-PRICE_UNIT    = INT_MAT-PEINH.
        BAPI_MBEW1-MOVING_PR     = INT_MAT-VERPR.
        BAPI_MBEW1-VAL_CLASS     = INT_MAT-BKLAS.
        BAPI_MBEW1-VAL_CAT       = INT_MAT-BWTTY.
        BAPI_MBEW1-ML_SETTLE     = INT_MAT-MLAST.
        BAPI_MBEW1-ML_ACTIVE     = INT_MAT-MLMAA.
        BAPI_MBEW1-VM_SO_STK     = INT_MAT-EKLAS.
        BAPI_MBEW1-VM_P_STOCK    = INT_MAT-QKLAS.
        BAPI_MBEW1-FUTURE_PR     = INT_MAT-ZKPRS.
        BAPI_MBEW1-VALID_FROM    = INT_MAT-ZKDAT.
    *ACCOUNTING 2
       BAPI_MBEW1-TAXPRICE_1    = INT_MAT-BWPRS.
       BAPI_MBEW1-TAXPRICE_2    = INT_MAT-BWPS1.
       BAPI_MBEW1-TAXPRICE_3    = INT_MAT-VJBWS.
       BAPI_MBEW1-DEVAL_IND     = INT_MAT-ABWKZ.
       BAPI_MBEW1-COMMPRICE1    = INT_MAT-BWPRH.
       BAPI_MBEW1-COMMPRICE2    = INT_MAT-BWPH1.
       BAPI_MBEW1-COMMPRICE3    = INT_MAT-VJBWH.
       BAPI_MBEW1-LIFO_FIFO     = INT_MAT-XLIFO.
       BAPI_MBEW1-POOLNUMBER    = INT_MAT-MYPOL.
        BAPI_MBEWX-VAL_AREA   = INT_MAT-WERKS.
        BAPI_MBEWX-PRICE_CTRL = 'X'.
        BAPI_MBEWX-STD_PRICE  = 'X'.
        BAPI_MBEWX-PRICE_UNIT = 'X'.
        BAPI_MBEWX-MOVING_PR =  'X'.
        BAPI_MBEWX-VAL_CLASS =  'X'.
        BAPI_MBEWX-VAL_CAT       = 'x'.
        BAPI_MBEWX-ML_SETTLE     = 'X'.
        BAPI_MBEWX-ML_ACTIVE     = 'X'.
        BAPI_MBEWX-VM_SO_STK     = 'X'.
        BAPI_MBEWX-VM_P_STOCK    = 'X'.
        BAPI_MBEWX-FUTURE_PR     = 'X'.
        BAPI_MBEWX-VALID_FROM    = 'X'.
       BAPI_MBEWX-TAXPRICE_1    = 'X'.
       BAPI_MBEWX-TAXPRICE_2    = 'X'.
       BAPI_MBEWX-TAXPRICE_3    = 'X'.
       BAPI_MBEWX-DEVAL_IND     = 'X'.
       BAPI_MBEWX-COMMPRICE1    = 'X'.
       BAPI_MBEWX-COMMPRICE2    = 'X'.
       BAPI_MBEWX-COMMPRICE3    = 'X'.
       BAPI_MBEWX-LIFO_FIFO     = 'X'.
       BAPI_MBEWX-POOLNUMBER    = 'X'.
    *Storage Locations
        BAPI_MARD1-PLANT      = INT_MAT-WERKS.
        BAPI_MARD1-STGE_LOC   = INT_MAT-LGORT.
        BAPI_MARDX-PLANT      = INT_MAT-WERKS.
        BAPI_MARDX-STGE_LOC   = INT_MAT-LGORT.
       WRITE:/ BAPI_HEAD-MATERIAL, BAPI_MARC1-PLANT ,BAPI_MARD1-STGE_LOC.
        call function 'BAPI_MATERIAL_SAVEDATA'
          exporting
            HEADDATA                   = BAPI_HEAD
            CLIENTDATA                 = BAPI_MARA1
            CLIENTDATAX                = BAPI_MARAX
            PLANTDATA                  = BAPI_MARC1
            PLANTDATAX                 = BAPI_MARCX
          FORECASTPARAMETERS         =
          FORECASTPARAMETERSX        =
          PLANNINGDATA               =
          PLANNINGDATAX              =
    <b>      STORAGELOCATIONDATA        =  BAPI_MARD1
           STORAGELOCATIONDATAX       =  BAPI_MARDX</b>
            VALUATIONDATA              = BAPI_MBEW1
            VALUATIONDATAX             = BAPI_MBEWX
          WAREHOUSENUMBERDATA        =
          WAREHOUSENUMBERDATAX       =
          SALESDATA                  = BAPI_MVKE1
          SALESDATAX                 = BAPI_MVKEX
          STORAGETYPEDATA            =
          STORAGETYPEDATAX           =
          IMPORTING
            RETURN                     = BAPI_RETURN
          TABLES
            MATERIALDESCRIPTION        = INT_MAKT
          UNITSOFMEASURE             =
          UNITSOFMEASUREX            =
          INTERNATIONALARTNOS        =
          MATERIALLONGTEXT           =
          TAXCLASSIFICATIONS         =
          RETURNMESSAGES             =
          PRTDATA                    =
          PRTDATAX                   =
          EXTENSIONIN                =
          EXTENSIONINX               =
    IF BAPI_RETURN-TYPE = 'E'.
       WRITE:/ 'Error Message ', BAPI_RETURN-MESSAGE.
    ENDIF.
    ENDLOOP.
    ENDFORM.
    <b>i am using this bapi method to copy materials from one plant to another plant using storage location so here what happenig is everyting is going correct but only the storage location data is not saving in table mard so any body faced this kind of problem please tell me.... and one more dbt
    bapi_marcx-pur_status = 'x' what is 'X' here??? is that mandatory field or required field ???
    points wil be rewarded.
    reagrds,
    sunil k airam.

    In the HEADDATA structure, STORAGE_VIEW should also be set as 'X' , in order to update storage location data
    for example
    BAPI_HEAD-STORAGE_VIEW = 'X'.
    Also, PUR_STATUS corresponds to field MARA-MSTAE whose domain has value table T141, therefore values in the field are checked against T141
    Edited by: Harris Veziris on May 12, 2008 12:37 PM

  • Location switching does not work on Vista

    Hi, my location switching does not work.  I have reinstalled my Access Connection several time but still does not work. I have several profiles and I need to switch manually depending on my location profile. My Access Connetion however seem to know the right profile (dot  next to the profile indicate it picked up the right wireless signal) but never connect to the profile
    Is there any Vista feature that is controlling the access as well? Do I need to disable? I remember the older version of Access Connection will ask to disaable some windows services when using Access connection.
    My Config is
    - R61
    - Intel(R) Wireless WiFi Link 4965AG. File Version 11.1.1.16
    - OS Vista 32 Business - with up to date patches
    - Access Connection 4.42 for Vista Build 7RCN38WW
    Thank you in advance for pointers

    Hi, my location switching does not work.  I have reinstalled my Access Connection several time but still does not work. I have several profiles and I need to switch manually depending on my location profile. My Access Connetion however seem to know the right profile (dot  next to the profile indicate it picked up the right wireless signal) but never connect to the profile
    Is there any Vista feature that is controlling the access as well? Do I need to disable? I remember the older version of Access Connection will ask to disaable some windows services when using Access connection.
    My Config is
    - R61
    - Intel(R) Wireless WiFi Link 4965AG. File Version 11.1.1.16
    - OS Vista 32 Business - with up to date patches
    - Access Connection 4.42 for Vista Build 7RCN38WW
    Thank you in advance for pointers

  • My auto location service is not working on iphone 4s after updating to ios 8.1.3

    Hi every one
    i have recently facing a problem my compass and other apps which require location service are not working on my Iphone 4s, after i have upgrade my iphone ios to 8.1.3. Settings are correct i.e. location service is 'ON' and apps require location service are allowed to use my location.
    is anyone facing the same issue. Need your valuable suggestions and advices.
    Regards
    Muhammad Shahbaz
    Pakistan

    Greetings Biyase, 
    Thanks for contributing to the Apple Support Communities. 
    It sounds like the Outlook app is not launching after you updated iOS. In this case, I recommend the troubleshooting steps found at this link:
    If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    Sincerely,
    Jeremy 

  • Cascading prompts are not working after UNX conversion.

    Hi,
    We have converted universe to UNX format, but after conversion the cascading prompts are not working. Following is the one of the example of the cascading prompt which is having issue:
    We have cascading object named u201CGroup - Deviceu201D as below:
    CONCAT(CONCAT(@select(Performance Management\Group\Group Name),' - '),@select(Performance Management\Device\Device Name))
    In the SQL Assistance windows, validate button properly validates this object.
    Based on the above object, we have filter named u201CEnter/Select Group u2013 Deviceu201D with following definition:
    @select(Performance Management\Performance Reporting Objects\Performance Custom Dimensions\Group - Device) In  @prompt('Enter/Select Device Names','A','Performance Management\Performance Reporting Objects\Performance Custom Dimensions\Group - Device',Multi,Free,Not_Persistent)
    When I click on the validate button for this filter, it doesnu2019t says whether the expression invalid or valid. It does not return anything. I checked the error log windows of IDT and it shows below error once we validate the above filter:
    Message: Unhandled event loop exception
    java.util.ConcurrentModificationException
         at java.util.AbstractList$Itr.checkForComodification(AbstractList.java:372)
         at java.util.AbstractList$Itr.next(AbstractList.java:343)
         at com.businessobjects.semanticlayer.qt.internal.ParseExpressionServiceImpl.getScriptWithAnswers(ParseExpressionServiceImpl.java:753)
         at com.businessobjects.semanticlayer.qt.internal.ParseExpressionServiceImpl.getGeneratedScript(ParseExpressionServiceImpl.java:695)
         at com.businessobjects.semanticlayer.qt.internal.ParseExpressionServiceImpl.getGeneratedScript(ParseExpressionServiceImpl.java:673)
         at com.businessobjects.semanticlayer.qt.internal.ParseExpressionServiceImpl.getObjectSQLCombinations(ParseExpressionServiceImpl.java:369)
         at com.businessobjects.semanticlayer.qt.internal.ParseExpressionServiceImpl.getWhereParseSQL(ParseExpressionServiceImpl.java:298)
         at com.businessobjects.bimodeler.universe.panes.properties.ExpressionParserSQLBindings.parseExpression(ExpressionParserSQLBindings.java:58)
         at com.businessobjects.bimodeler.shared.dialogs.expression.ExpressionEditorComposite$7.widgetSelected(ExpressionEditorComposite.java:330)
    This problem is for all the cascading prompts, and only single level prompts are working after conversion to UNX.
    Can anyone please help on this? Am I missing any manual changes which are mandatory after UNX conversion for this to work.
    Thanks,
    Nilesh

    Hi Henry,
    Thanks for your reply. Yes I have raised SAP ticket for this.
    We are at BI 4.0 SP2 Patch 12.
    This problem is for all the cascading prompts which created using objects which are having u201CLOV based on Query Panelu201D, it doesnu2019t return the results, when I edit the LOV > edit the query and then click refresh to see the data, the refresh button does not appear.
    So I tried creating u201CLOV based on a custom hierarchyu201D as indicated in SAP note u2013 1666504 but it also doesnu2019t work. I used the object (that uses the LOV based on a custom hierarchy) to create the new cascading prompt, when I used this prompt in WEBI report, it only displays prompts for first value and not the second based on first input.
    I searched SAP KB and found this note u2013 u201C1620378 - Cascading (nested) prompts are not working for Web Intelligence reports in BI 4u201D which describes bug related to cascading prompts in unv as well as unx. But I am not sure if itu2019s the same which I am getting.
    Thanks,
    Nilesh

  • Storage location value is not adopting fron PO into GR

    Hi All,
    I'm making Goods receipt with reference to Purchase Order. For few materials the storage location value is not adopting fron PO into GR. It's in disable mode. So i'm not able to maintain the stock at storage location level. What could be problem? Please help me on this.
    Thanks
    Anilkumar Dalai

    Dear Expert,
    PO is with refrence to Order 'f' Category.
    is it a Production order or a Customer Sales Order?
    or is it a financial internal Order?
    Could you please be more specific??
    In case please check which Sloc you have assigned in the order with ref to which you created PO.
    Please change directly in the order.
    Raghavan

  • I have a 4s i upad te to ios7 and the location (GPS) is not working

    I have a 4s i upad te to ios7 and the location (GPS) is not working, mapa is working, but cant find places or tell me my location...  Can ana One help me ????

    Hello James,
    The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
    Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
    Hope this helps,
    Thanks
    Vijay

  • Since updating the recent OS on my iPad my location services do not work.  Maps "Cannot determine location"  and "Find Me" is running in circles.  How can I delete the update on my iPad???

    Since updating the recent OS on my iPad my location services do not work.  Maps "Cannot determine location"  and "Find Me" is running in circles.  How can I delete the update on my iPad???

    You can't delete the update and your problem probably is not in the Update.
    Check to see if Location Services is turned ON. (Settings > Privacy > Location Services)
    What model iPad Mini do you have? WiFi or WiFi + Cellular
    Have you recently changed WiFi routers?

  • In va02 tocde after entering the data only storage location field is not saving.why?

    Hai
    in va02 tcode after entering the data only storage location field is not saving. why?

    Hi Purnaiah,
    Are you using any user exit for this or not?
    Check for the below exit, this may be the place where you can implement your code for saving the value.
    SAP MV45AFZZ calling the user exit with a form USEREXIT_SAVE_DOCUMENT
    Regards,
    Rafi

  • TS3274 Location service  is not working on iPad retina

    Location service is not working I tried everything
    Is it hardware of software problem

    Your Wi-Fi only iPad do not have GPS.
    It gets it position from Apple's router data base. Your location may not be in the data base.

  • Bought a new router location services will not work hooked up old router location services came right back on

    bought a new linksys router location services will not work on i-pad hooked old router back up and it started working again linksys was no help

    WiFi iPads determine location through a database of router locations. Your new one is not in the database, give it some time and it will be added.

  • Storage Location from USERTEMP1 not picked during Goods Issue

    Hi All,
    We had populated the USERTEMP field in FMDERIVE with the Storage Location using the steps mentioned in the following thread
    Fund Center not getting populated through FMDERIVE
    The problem is that during a Goods Issue made from MIGO, this particular field is not getting picked up in the USERTEMP (trace was set up in FMDERIVE, which showed that the USERTEMP is empty).
    But in the case of PR/PO and other purchases, the USERTEMP is getting derived properly with the storage location.
    Why is that the USERTEMP behaves differently for a Goods Purchase and a Goods Issue ?
    Requesting help from the experts on this issue,
    Thanks,
    Wy.

    Hi Eli,
    We replicated the development we did for procurement (copying from storage location into USERTEMP) by finding out the enhancement point and the code worked fine here.
    One important thing to note is that the buffer need to be cleared everytime, before a value is entered here - the USERTEMP field is static otherwise.
    Thanks for your inputs,
    Wy

  • Storage location in QA32 not appearing

    HI GURUS
    IN QA32 , STORAGE LOCATION IS NOT APPEARING FOR FEW MATERIALS . IN PURCHASE ORDER WE HAVE CONSIDERED ASSET ACCOUNT ASSIGNMENT CATEGORY , WITH VALUE & QUANTITY UPDATION . BUT DURING GRN STORAGE LOCATION IS NOT TAKEN INTO ACCOUNT SO IN QA32 ALSO STORAGE LOCATION IS NOT APPEARING. IS THERE ANY OPTION WHERE STORAGE LOCATION SHOULD APPEAR IF IN GOODS RECEIPT IT IS THERE OR NOT.

    hi AK Marwadi ,
    Thanks for your response, they need storage location for reference in QA32 to keep a track otherwise they are not checking those documents at all . they should go to purchasing document for storage location . Please let me know apart from development anything can be done in standard.
    Regards,
    Sowmya

Maybe you are looking for