Storage Location STO !!

Hi
Can anyone explain me "Set Up Stock Transfer Between Storage Locations" ?
What is this concept?

>
Muralidharan Iyengar wrote:
> Hi Adithi,
>
> Please find the below steps to perform STO for S. Loc.
>
> SPRO > MM > Purchasing > Purchase Order > Set up Stock Transport Order > Set Up Stock Transfer Between Storage Locations > Here perform following activities;
>
> Activate Stock Transfer Between Storage Locations
> Assign Delivery Type and Checking Rule According to Storage Location
> Define Shipping Data for Stock Transfers Between Storage Locations
> SPRO > MM > Purchasing > Purchase Order > Set up Stock Transport Order > Set Up Stock Transfer Between Storage Locations > Set Up Storage-Location-Dependent Shipping Point Determination > Here perform follwowing activities;
>
> Define Rule for Determination of Shipping Point
> Assign Shipping Points According to Storage Location
>
> regards,
> Murali
This is for ECC6.0.
If you are using ECC5.0, you need to implement BADI  MD_EXT_SUP.

Similar Messages

  • MRP - Create STO for Stockk Transfer between Storage Locations

    Hi Everyone,
    I have a scenario where MRP run should create Planned Order as well as STO for a VSF Requirement. The reason is our Plant has got 2 Storage Locations. One is the Production Storage Location and the other is Warehouse Storage Location. The Planned Order should be for Production SLoc and STO should for Stock Transfer from Production to Warehouse Storage Location. Your suggestions are much appreciated to resolve this issue.
    Thanks,
    Jay.

    new releaes bring new features........
    not all new features can run in old environments.
    I know that companies did already Storage location to storage location STOs in 4.6c but they had z-tables to assign customer numbers at storage location level, and they had changed some  coding to make it happen.
    I am not sure if there is an OSS note that explains the steps and modifications needed......but try to search OSS.

  • STO for storage location to storage location with delivery charges

    Dear Users,
    Please advice the configuration & pre-requisites for storage to storage location STO with delivery charges within a plant.
    Thanks & Regards,
    Shyam

    Moderator message:
    Please put some efforts into a search
    Storage location to storage location stock transfers have been many times discussed as well as delivery charges in UB stock transfer order.
    Do not just post your requirements and expect others to do your job.
    If you dont know how to search, then please see these blogs:
    A good way to search the forum is with google. See this blog with details for a good search
    Getting the Most out of Google: Optimizing Your Search Queries
    This blog describes how to use the SCN search:
    How to use SCN search
    The discussions are not a replacement for proper training
    Thread locked

  • Availablity check at storage location level in STO

    Hi,
      There is an unique requirement from my client with respect to the Availability check at storage location level in STO
    Process:
      Based  on the inputs from APO we are creating STR for moving the material from one plant to another plant. These STR’s will be converted into STO through ME59N batch job. During STO creation process system will do the availability check and only if stock is available in the issuing plant then only STO will be generated.
    During this availability check the stock will be considered at plant level and not at storage location level.
    Requirement/Scenario:
    Issuing plant contains two storage location ( location A & B).FG stock exists in both the locations.
    Our requirement is system should create separate line items in the STO based on the availability of the stock in the respective storage locations.
    Example
    Total required qty: 1000  of material X
    material X - Stock in Storage location A  : 600
    material X - Stock in Storage location B : 400
    Two separate line item needs to be created in the STO
    Sl no
    Material
    qty
    Issuing storage location
    1
    X
    600
    A
    2
    X
    400
    B
    Is there any function module available for doing Availability check at storage location level so that it can be called in ME59N with the enhancement.
    Please suggest how to achieve this. If any enhancements needs to be done we will do it.
    Thanks & regards,
    Prashanth

    Hi Nilesh,
    in SAP standard the system is always checking on plant level first and then on the storage location level, there is no possibility to change this behaviour.
    I'm also not sure if the process is correct, because if you have also requirements on plant level only then you would create negative ATP if you confirm on storage location level even though there is no ATP on plant level.
    I'm also not aware of a user-exit that would suite your requirement, additionally according to the IMG documentation the user-exits in the availability check area should only be carried out in agreement with SAP.
    Regards,
    Markus

  • PO number not displaying for STO PO between storage locations in VL10B

    Hi Experts
    I have created a STO PO for stock transfer between 2 storage locations.
    The PO has been created correctly - along with the "Shipping" details aptly.
    However, when I execute VL10B along with the PO, the output screen doesn't show the PO created.
    I have checked various discussions and verified the same. However, I am unable to create the outbound delivery for the PO.
    Please help me on this.
    Best Regards
    Sudhi

    Remove everything from the selection screen (including shipping point and delv. date). Just put the PO in the Purchase Order tab. Check all the other tabs, material, user role etc for extraneous/incorrect info.
    Does the PO appear then?

  • Excise for STO for Storage location

    I have a requirement whre i want to create Excise invoice for STO between storage location, as i already raised this doubt in SD community, but did not got the satisfaction.
    As i want to use the same excise NUMBER series which is assingned to excise document when i create Excise with reference to Billing Document.
    Plz guide how i will configure for Excise for STO in case of Storage location transfer and how i will maintain the same series for the EXCISE which i have created for when i create excise with referecence to my billing document.

    not required

  • Shipping point in STO defined upon storage location

    Hello, all
    On stock transport order I want to set up shipping point in a way that it is determined regarding to storage location I have entered in header of STO.
    Storage location is saved in field EKKO-ZZLGORT (tab Customer data). Now I need solution how to determine or overwrite shipping point when entering items.
    For example:
    . if storage location is 100, shipping point should be AAAA
    . if storage location is 200, shipping point should be BBBB
    I know that shipping point is determined according to combination of Plant-Shipping conditions-Loading group. And it works this way now.
    Is it possible to do this via customizing ? If user-exit is needed please specify which and what must be modified. I'm not a programmer but I know business process. Will get help of programmer if needed.
    I'm looking for this solution because I want to prevent that VL10b puts Stock transport orders with different storage location in header on same delivery.
    Thanx in advance,
    RJ

    Hi,
    You should be able to use METHOD if_ex_me_process_po_cust~process_item to change the shipping point. We've created a customer table in which we've set the corresponding plant, SLOC and shipping point combination which is read during execution of the BADI.
    You can also use METHOD if_ex_le_shp_delivery_proc~save_document_prepare for changing the shipping point in the delivery.
    We've used above for return items. We're on 6.0 as well and for all non return items, standard customizing is available, but not for returns.
    Hope this helps.
    MdZ

  • Stock transfer between plants without STO and storage locations

    Hi.
    In case of stock transfer betwen storage locations with one step it is possible to do stock transfer between different stock types. But in Two step it is only possible to do stock transfer from unrestricted to unrestricted.
    In case of Stock transfer between Plants without STO in one and two step stock transfer, it is possible to do stock transfer  from unrestricted to unrestricted.
    Is there any reason for this?

    Hi
    Thanks for your reply. But i could not understand the sentence - But this is not possibles with 2 step procedure. becasue 2 step is recored will be maintained . In 2 step it not possible. Can you please eloborate on this
    Regards,
    Vivek Swarnapuri

  • Issuing Storage location in STO

    In the STO process the system is allowing to save the STO without Issuing storage location. But, at the time of delivery creation the system is throwing an error message that Zero delivery quantity is not permitted. Now if the issuing storage location is entered manually then the delivery can be created successfully.
    Please suggest the possible solution to avoid this.

    IMG >  Enterprise Structure > Assignment > Logistics Execution > Assign warehouse number to plant/storage location
    That's a WM configuration, and is irrelevant for picking storage location determination.
    In fact the determination is in the exact opposite direction, SAP will use the plant/storage location to determine the warehouse number, not the other way around.
    The correct path is: IMG -> Logistics Execution -> Shipping -> Picking -> Determine Picking location -> Assign Picking locations.

  • STO'S WITH STORAGE LOCATION AT HEADER LEVEL

    Sir,
    I want for sto's at header level Storage location to be enter manually.
    Means with supplying plant i want to explore storage location field.
    regards
    amey

    hi,
    normally during STOs creation system will do the availability check and finds in which storage location the stock is available for delivery/pgi and defaults it.PO will be created by the receiving plant .If you provide a storage location in the item details system will posts to that location during GR.I do not think so that at header level you can give a storage location for supplying plant.
    Regards,

  • How to get delivery address in STO for the storage location

    Hi All,
    We have to create STO from the reservation using MRP run. While system is creating the STO we need to populate the storage location address as delivery address (not the plant address ). How we can do that? what are teh settings required for this setup? please hlep in that.
    Regrads,
    Khan

    Hello...
    You can select the storage location in the line item itself which is adjecent to Plant for the line item.
    Regards
    Suresh

  • STO Between Storage location configuration

    Hi,
    We are using STO configured for Plant to Plant stock transfer.
    Now we wish to configure STO between Storage Location
    We wish to know whether STO between Storage locations can be used along with STO between Plants.
    We are in ECC 6.0.
    Regards,
    Kiran

    Hi Kiran,
    Yes, you can use STO with plant to plant as well as STO with st.loc to st.loc. but the plants have to be differnet plants.
    Check the customizing for st.loc. sto in ECC 6.0
    Cheers,
    Satish Purandare

  • Determination of Issuing Storage Location in STO

    Hi Gurus
    How can we auto determine the issuing storage location in Stock Transport Order (STO)? If it is via user exit, could you please provide the user exit?
    Appreciate yr help on this.
    Thanks
    Rgds..Sanjay

    Had you gone to this node
    Materials Management -
    > Purchasing -
    > Purchase Order -
    > Set up Stock Transport Order  -
    > Set up Stock Transfer between Storage Location -
    > Business Add In for Deterination of Issuing storage location.
    See /ISDFPS/MD_EXT_SUP may be useful .

  • STO settings between the storage location

    Hello,
    I am trying to set up the STO between the storage location can anyone please tell me the detailed configuration steps. I have created the STO but in hte delivery the document is not displayed. please help me out here

    Hi
    SAP offers a STO process between storage loactions and this is not active in Standard SAP.  You need to activate it and further deactivation can cause some discrepencies.
    Follow the steps
    1. SPRO > MM > Purchasing > Purchase order > Set up stock transfer between storage locations.
    2. Activate stock trasfers between storage locations -> this will enable maintaining issuing storage location in thhe line item of the PO
    3. If delivery based GI is required then
    3. You need to set up delivery type, checking rule for a purchase order document type and issuing storage location
    4. Define shipping data for the storage locations
    This should help you with the process
    with regards

  • STO - Delivery to be created from specific storage location

    Hi,
    My requirement is after STO creation stock would be consider from a specific Storage Location and if stock is not available in that specified storage location system should throw an error at the time of delivery creation(VL10B) or delivery would be created for the available stock in the specified storage location.
    Please advice what configuration to be done to achieve this functionality.
    Thanks,
    Victor

    Dear Venkatesh,
    Thanks for your prompt reply,
    But I could not find the Storage Location field in Purchase Order Header, checked in field selection layout 'UBF' and in table 'EKKO', wherein a Storage location field is available in Item Overview next to the receiving Plant.
    Plz help me out,
    regards,
    urendra

Maybe you are looking for