Storage location,Stocktype,Batch no for 2lis_03_um

hi experts,
We have recently extracted Inventory Data from ECC to BW System, and client was reconciling the data in 0IC_C03.
we have extracted from 2lis_03_bx,2lis_03_bf and 2lis_03_um.
and for the Valuations which 2LIS_03_UM-->0IC_C03  client is saying that there is no Storage Location, Stocktype, Batch number.There is no "storage location" for valuations, this means that if you search on a storage location you will miss price changes. so we need storage location to be filled out in the cube.
The same goes for batch number, stock type and Base Unit of measure.
What is the solution to achieve this? Last month only we have initialized the data and delta loads are happening everyday.
instead of enhancing the data source can we change in the Transformations level to get Storage location,Stocktype,Batch number and 0BASE_UOM.
if i have to enhance the data source do i need to take downtime and Initialize the delta again.
please provide me the solution..
eXPERTS any updates plz
regards
venuscm
Edited by: venugopal vadlamudi on Oct 14, 2010 6:20 AM

Note 589024 - Reports in BW with storage location and stock type chars.

Similar Messages

  • Storage location and Batch updation for components in Production Order.

    Hi Friends,
    After creating Production Order,need to update components with Storage Location(RESBD-LGORT) and Batch(RESBD-CHARG).
    Plese any one can help me by providing FM/BAPI for the same(Update Component level)
    Points will be rewarded.
    Thanks,
    Prb.

    Hi Prathap,
    Path - OCHA
    Condition type,access sequence, strategy type,
    Work on automatic batch determination. Assign standard search procedure to order type dependent parameter, check against manual entry.
    Make sort sequence for material by CU 70, tick ascending order, Then assign component in COB1, enter selection values and sort sequence. In finish product material master set automatic batch determination.
    System will copy the required material with batch & storage location, also check against manual entry.
    I think it will solve your problem.
    Regards,
    Suhas

  • Stock on posting date -storage location and batch wise

    Dear All
    I need to developa report exactly same as MB5B but with storage location and batch wise.
    We need  storage location wise opening stock, total receipts, total issues and closing stock, and values for given time period.
    I have gone through some history tables like MCHBH and MBEWH.
    But all the history tables are having fileds for period wise but not date wise.
    Any focus on this?

    You have to read the coding of MB5B to see how SAP is doing it.
    The stock per date is calculated, starting from a month end, adding or reducing quantities based on movements until the date in question is reached.

  • Link between storage location and batch number to retrive the salk3 field

    HI,
    In my report i need to give the output as follows
    For each lgort with related batch number we need to get the salk3.So i need to get a link between lgort , batch number to retrive the salk3.can any one give the tables from which i can get the link and retrive the data.
    note: My report output should look like the fields lgort batch  and unrestriced value of stock in tcode mb52.
    subhashini.
    Edited by: subhashinikb on Apr 1, 2011 9:38 PM

    Hi,
    In 2 steps, u can get the unrestricted stock value.
    step1: Get material no (MATNR), plant (WERKS), batch (CHARG) and unrestricted stock (CLABS) from table MCHB by sending Storage location and batch number.
    Step2: Get standard price STPRS from table MBEW based on condition where MATNR = MCHB-MATNR, BWKEY = MCHB-WERKS and BWTAR = MCHB-CHARG.
             unrestricted value in MB52 will be (MCHB-STPRS) * (MCHB-CLABS).

  • Error in storage location determination in VL02N for cross comapny stck trf

    Hi,
    currently we are doing intercompany stock transfer & after VL10B we are doing VL02N & we are getting an error "enter storage location cross company stock transfer".
    where as we have already define the storage location in OVL3
    error message text
    message type-E
    message class-M7
    message number-018
    message variablr1-stor.location
    Regards,
    Tushar

    First check whether in MMSC that storage location is maintained.
    Also Standard explanation for M7018 is as follows:-
    If the storage location or batch is missing it may be possible to enter
    * in the field and branch into the  storage location/batch selection
    list. You can find out whether this function is defined for this field
    via the F1 help.
    Procedure
        Enter a value in field "" or press F4 (possible entries).
    From the above, it is clear that in VL02N, you have to maintain the required value.
    thanks
    G. Lakshmipathi

  • Picking quantity from a different storage location during batch split??

    Hi Gurus,
    Have an issue with doing batch split in a delivery with batches from several storage locations.
    Have delivery XXXXXX where I want to pick batches from several different storage locations.
    I click on the batch split button and select the different batches and quantitys.
    The issue here is that I would like to have the different storage locations entered automatically based on the selection of the batch I have made.
    The only storage location that is entered here or possible to be entered is the defaulted storage location that is in the first screen...
    My question is why can I get the storage location where the batch is located and acctually exists when I do select the batch in the batch split...
    The table LIPS and LGORT is not filed with the storage location so I do not know how I could fill this field with the correct storage location data...
    Thank You for all Your help!
    BR,
    Christian

    Hi Christian,
    you have not jet got an answer  -- here my suggestion.
    You have to use the Userexit Mv50afz1. Here you can do some checks and  you can do a popup, where you can sign the LGORT, where the batch is.
    In any case, you need an ABAPer
    In documentation, there is signed, that you should not change database other as Save_prepare - and that's too late.
    In one solution at my company, i show in a message the right information. In an other solution, i made a modification of table lips.
    But dont change the index of the current lips/xlips. That may have the effect of incorrest LIS - System.
    If nessesary create an ylips- Line of the position.
    Use an assign-command to avoid the change of the index.
    hans

  • Unable to set plant and storage location in Batch as required/mandatory

    Hi Experts,
    I am having a problem regarding field controls.
    I would like to make plant and storage location as mandatory/required in MSC1N,MSC2N,MSC3N and MSC4N.
    I have follow the path below
    SPRO-logistics-general-batch management-bath master-field selection batch master-assign field to field groups
    What i can see is field groups are being assigned to field name.
    My question is, where do we go to to set the field group?
    Thanks in advance!

    Hi Dex,
    You have gone to the right location.
    On 'change view field control for batch master record' against each transaction like MSC1, MSC2,MSC3 and MSC4 there are number of dots '............'.
    Double click on each dot against the transaction you want to modify. Each dot corresponds to different fields. Over here you can specify wheter you want to make the field required, optional etc.
    Hope this helps.
    Tarang

  • Exclude storage location during batch determination

    Dear SAP Gurus,
          My client senario is PP-PI. We are using batch determination in process order. Suppose my raw material is 'A'. It is present in ST1-100 qty, ST2-200 qty and ST3-150 qty. Now during batch determination i want to consider only ST1 and ST2 in determination and don't want to include ST3 in determination. But during determination system consider all 3 locations. So how can i exclude ST3 from batch determination.
    What things i have to do for this. Please help me out.
    Thanks and Regards,
    Harish Gunjatay.

    Hi,
    Sol 1:
    U can create Storage location as one Characteristic and while determining the batch, you can play with this characeteristic. Just this logic strikes my mind. See the posibility. And by "Reference Characteristic" concept if u can establish automatic updation of this characteristic, it will be superb.
    Sol 2:
    In Bactch Information Cockpit I think u can filter the storage location out. Try this also.
    Kiran.

  • Inspected stock posting to multiple storage location without batch

    Hi,
    At the time of Usage Decision, I want to post the inspected stock to multiple storage location i.e., Rejected Stock to Scrap Storage Location, Qualified Stock to Unrestricted Use Storage Location.
    Quick response will be appreciated.
    Anandkumar KS

    The scrap line has no storage location since that stock is typically written off and scrap cost center is defined in configuration.
    A possible alternative is to set up VMENGE08 and VMENGE09 with the same material movements you want to use.  You obviously aren't using the 553 movement type as that writes off the material.  That could give you two lines to use for your scraping.  I can't remember if these stock posting lines give you the storage location option or not and I don't have a sandbox available to test today.  If you need to post more then two grades in one inspection lot, you'll have to do the first two postings, save the UD, then come back in and do a second posting for the next two grades.
    Read the configuration help file you'll find in confg for "Define Inventory Postings" under the QM config.
    You can also change the displayed names of the stock posting lines.  That's explained in the config file as well.
    Craig

  • Storage location mandatory for inter stock transfer

    Hi,
    Document where only issuing plant has storage location and user has not entered storage location in destination tab.
    It is observed that where u201Cstorage locationu201D is missing  in u201Cdestination tabu201D, system is not able to determine batch no ( mvty 351 ). Since batch number is not fetched it gives further error in Batch level valuation and subsequent issue at some different price.
    Please analyze the above issue suggest us as to making storage location mandatory to solve batch valuation problem.
    I have tried to add storage location field LGOBE in the mvt type 351.  I am getting error field LGOBE is not allowed with mvt type 351.
    Please help me urgent.
    Thanks in Advance,

    Hi,
       With mov type 351 you issue the material from the supplying plant. This material is then get transfeered to the INTRANSIT stock.
    Once you do goods receipt against the STO this Intransit stock is moved to the Receiving Plante.
    Hence, no destination storage location will be allowed for mov type 351.
    Rajesh

  • Multiple physical inventory document active for same material-storage locat

    hi experts,
    I am using transaction code MI31 for creating physical inventory document for all materials at a particular warehouse(storage location). User is selecting direct generation of of PI documents in the transaction. If by mistake he presses execute button more than once system is creating as many copies of physical inventory documents. As per ERP system logic it sound very wrong to have multiple physical inventory document active for same material-storage location ( no batches or special stocks exist ).
    Is there a message number or some standard setting to prevent such occurrence.
    regards
    Avinash

    Hi,
    Syetem won't create again physical inventory document, if allready PI is active for the same part number,  plant, storage location & batch/valuation type.
    Check your PI documnets
    Regrads
    KRK

  • Storage Location & Batch Number

    Hi Experts
    I am doing Milestone confirmation of the last operation, at that time the Materials are also Issued to the Production Order, the storage location and Batch number should appear in the goods movement screen so that Milestone confirmation is successful.
    Can you let me know where I should maintain inorder that the storage location and batch numbers are derived and the milestone confirmation is done without any errors.
    Please revert on the above.
    Thanks....

    Dear Jade,
    The storage location and Batch of the component are populated from production order. To default the location of a component in the order creation, you need to maintain it either in BOM>Item details>Status/Lng text Tab or in material master MRP-2 view of the component.
    For Batch to appear automatically on goods movement screen of confirmation, you need to carry out the batch determination on Change order> component overview screen. You can carry out batch determination on goods movement screen also (As per your choice).
    I hope this will solve your problem.
    Regards,
    Uday

  • Storage Location in DS 2LIS_03_UM

    Hi Experts,
    We are facing the problem by not having the storage location in DS 2LIS_03_UM. I already searched the threads and there are a plenty of topics regarding this issue, also regarding to DS 2LIS_03_BF. As we are reporting on storage location level, the informations from the DS 2LIS_03_UM are very importatnt for us.
    I am also wondering why the TA MCBA includes data on storage location (not only from 2LIS_03_BF but also from 2LIS_03_UM) and the DS 2LIS_03_UM cant extract the storage location information.
    Is there any possibility to get the storage location information in the DS 2LIS_03_UM? Maybe also by insert programm code in the Extractor?
    Thanks for your help,
    Best regards,
    Roman

    Hi Kunal,
    Thanks for you honest answer - even if I didnt want to hear, that its just possible with enhancing the extractor :-).
    But your absolutely right - i also think, that this is the last and only option. But the main question is, how to enhance the extractor, when the revelations dont have any storage location on line item. Therefore i would need the connection between revelations and material movement items to get the correct storage location for revelations. Do you have an idea how to come from revelation item to material movement item? As I think thats a custom adjustment, there is no "global rule" for that.
    Thanks again for you answer,
    br
    Roman

  • Report for material documents with storage location

    Hi gurus,
    I would like to know if there is a report to display material documents but in the same screen display storage location from and storage location dest.
    Thanks for your help.
    Regards.

    Hi,
    You can use MB51 or MB59 with customised layout selection for your requirement.
    With regards,
    Ajay.

  • Purchase info record for PO determine by Storage location

    Dear Guru,
    Can you please advice when during the creation of PO, is there possible to determine the Purchase info record by the Purchasing Org, material, Vendor as well as "Storage Location".
    Reason,
    Sometime we need to raise the PO those customer who will be exempted from the governamt VAT or duty which the goods has to delivery to the country Bonded warehouse.
    I created 2 Storage location;
    1.) 1000 for general WH
    2.) 2000 for Bonded Wh
    So i would like to know if we can create 2 different info record determine by Storage Location?
    Thank you very much,
    Regards
    Chee Wee

    Hi
    In Standard SAP it is not possible

Maybe you are looking for