Storage location to be excluded from availability check

Hi,
Our requirement is to exclude a storage location for availability check. Certain user exits are listed under programs FV45VFZZ / FV45VFZY / RV03VFZZ. Can any of them be used to block a storage location. If so what is the code to be written.
Regards,
KC

Dear Krishna,
Go to the transaction OVZ9 - carry out Availability check.
Select the requirement, Individual/Collective with the checking rule as A or B, where you want to stop the checking of Storage location and double clik.
Inside there is a tab Storage location inspection - there activate the checkbox.
Hope this helps. Reward points if satisfied.
Thanks and regards.
Augustine Ponraj.

Similar Messages

How can a qm-lot be excluded from availability check?

Hi experts,
in oppj I can exclude "stock in quality inspection" from availability check, but the qm lots are still handled as fixed receipts. This is ok, because the qm lots are not a stock. But the availability check shows available quantity and this is, what I don't want!
The question is: "How can qm-lots be excluded from availability check?"
Thanks for your help!
SAP Anwender

Dear,
when you talk about QM lot,
QM lot is created during PO GR or Production order GR. Hence before the GR, MRP showes a recipt is expected and recipt element is either production order or PO.
Now even after GR, system removes the PO/Production order and increase the stock.
Hence in availability check if you decativate QM stock, this stock will not be considered, if to be con sidered, then active the QM stock.
Pl come back if required

Storage location to be excluded from MRP Run

Dear Gurus ,
We are trying to exclude perticular Storage location from MRP Run with the Configuration setting
IMG >>> Production >>>.MRP >>>.Planning >>>>.Define Storage Location MRP per plant >>>> Indicator 1 is set
Still the Stock is being considered
As I know this can be done thr' MRP4 view , but we don't want to go Part No wise ,
Suggest better sloution
Thanx in advance

Vasu,
Above IMG path is only used for defulting the storage location exclusion in material master.
Whenever materials are extended to this storage nlocation in mm01 or mmsc, this defult value would be proposed automatically .
However this does not mean setting it in IMG would change existing materia storage location extensions automatically. Also MRP will not pick from above IMG settings.
Once again above setting is only valid from defulting the values while extending the Materials to storage locations.
Hope it helps.

Exclude storage location from Availability check

Hi,
We have to exclude 4 storage location out of 46 storage locations from availability check in sales order processing.
Please advice how to do it.
We can not use MRP area and MRP Groups to control this because of certain reasons.
Regards,
Avnish

Please check this..
spro...material management....consumption based planneng....planning...define storage location MRP...
Here give plant name and enter...
Against every storage location you ll have indicators for excluding,including the stock....
hope this clarifies..
For material availablity check in production order,
1. you need to delete the storage loation in OX09 (it is possible If no stock)
2. Or you need to transfer post the materials to a storage location xxxx which you can name as Blocked storage location...
F Y I....In OVZ9 you can exclude all the storage locations which is not your reequirement..
katrthick
Edited by: karthick PP on Mar 26, 2009 12:40 PM

How to exclude stock in transit from availability check?

Hello,
When we run availability checks, we would like to exclude stock in transit.
How can this be done?
Thx.
Andy

Hi,
Exclude the stock in transfer from availability check in tcode opjj.
Regards,
nandha

The system does not get Storage Location of the material from the Contract

Hi to all,
We are encountering a problem now regarding the PR to PO conversion. Our ABAPer has made a background job for the User to convert a PR to PO using ME59N.
Background Job : ZPTI_MM_PR_PO_CON
Program : RM06BB30
Tcode: ME59N
Variant : SAMPLE2_ME59N ( Plant, Vendor, POrg, Pgrp.)
Rule : When the PO is converted the STORAGE LOCATION of the material should be gotten from a CONTRACT/AGREEMENT instead of the SLoc defaulted in PR.
Problem: When the backround job is finished, the PO is converted but the STORAGE LOCATION did not get from the CONTRACT.
Steps done :
1. Create a Contract (ME31K)
    1.1 Specify the SLOC of the material
2. Create PR (ME51N) and enter the Contract Number inside the PR
    note : In the PR the material has a Storage Location which defaults from the Material Master.
3. Run SM36 and enter the job ZPTI_MM_PR_PO_CON
4. Set the job to "Immediately"
5. Click Steps icon and enter the program RM06BB30 and variant SAMPLE2_ME59N
6. Save
7. Go to SM37 and check the job if finished.
8. When the job is finished, check the PR if it has a PO.
9. Display the PO.
10. Check if the storage location in PO has gotten from the Contract
     The problem now appeared.
We have tried to use ME59N alone and not using the background job. The system has gotten the correct Storage Location, thus it got from the Contract.
Please help what should be checked on our side. Our ABaper is also currently debugging the program but we
are seeking help to fasten the solution.
Best Regards,
Elynne

Hi Elynne,
Definitively, it is a problem with ME59N background process.
It is better if you can create a message to SAP asking for the solution.
I only found the next SAP note:
Note 1287723 - ME59N in backgound does not populate PR details in PO.
But, I do not know if it will help to resolve your issue.
I hope this little information can help you in anyway.
Kind regards,
Sandra

Exclude stock reserved for production order from availability check

Hi Experts,
We have a problem in the availability check.
There is a material used as selling product and components in the same time.
When the material has been reserved completely for a production order, the new sales order still get confirmed despite there is no physical stock at all!
Please advise how to exclude the stock reserved for production order from the availability check in sales order? Many thanks!
Regards,
Qiang

Go to MM02 and check what availability check is maintained for that material. Next go to OVZ9, select that available check with the combination "A" and maintain "X" or "F" in the field "Incl.production orders".
thanks
G. Lakshmipathi

During MRP run unwanted plant and storage location include and exclude

Hi There,
During MRP run how to include and exclude the unwanted plant and storage location pls let me know the required configuration settings.
Thanks in advance.

HI,
To control whether a particular storage location will be included or excluded from the MRP run. (MD02/MD41).
To exclude it from MRP run :-
OMIR - Define storage location MRP per plant
Put the MRP ind. as.         1 - storage location stock excluded for MRP
To include it from MRP run:-
OMIR - Define storage location MRP per plant
Put the MRP ind. as.      space - storage location stock also planned at plant level and save it
Next go to transaction MM01 - tick only view MRP 2
Key in Plant and Storage Location
Look at the Storage Location MRP section
change the SLoc MRP indicator to space and save it
MMD1 - Create MRP Profile - MRP profile is a useful entry aid and makes it easier to manage MRP data.
You define which fields are filled with values when MRP data is entered in the material master record, which of these values can be overwritten and which not.   You use the information stored in a profile is standard information that is needed again and again in similar constellations when material master records are maintained.
Regards
KK

Can interfaces be excluded from AVC checking by custom activity type?

Certain interfaces with specific document types need to be excluded from the availability control checks. Can this be done via the derivation strategy for control object? If so, how?

Hi,
You need to use a special BADI for Account Assignment Derivation of AVC Ledger - FMAVC_DERI_AFMA
The methods of this BAdI are called in function module FMAVC_CALL_DERIVATION_ACO, immediately before or after deriving an availability control object.
Good luck,
Elena

I Movie message:No Storage Location set while importing from HD Handycam

While importing media from sony handycam (HD file based cam) the following message appears after the clips are ready to be imported:No Storage Location set. Cannot start ingestbecause there is no storage location set. Please set one under Storage in Preferences and try again.

I think these are the steps I took:
1 Shut down the computer completey and then startup again (Camcorder disconnected)
2 Connect camcorder and in iMovie follow the procedure to import from camera. This triggers the launching of iPhoto - but as iPhoto started to launch I had the mouse pointer on the iPhoto icon at the bottom of the screen and right clicked the mouse with the option button held and selected 'Force Quit'
It worked for me and I hope it works for you! Later when I went to import again, both iPhoto and iMovie behaved as expected.
The whole thing is a mystery to me and the original message is no help at all and gives no guidance as to how to solve this (common?) problem.
Hopefully this 'bug' can be fixed by Apple engineers -fingers crossed.

Need to exclude storage location from MRP.

Hi Gurus,
Is there an option to exclude a specified storage location from MRP at configuration level. But not at material level as in MRP4 view.
We have excluded the stoarge location in config OMIR, however the system considers that stock if the same is not excluded in MRP4 of that material.
Now, the problem is every time i need to go to the material master of every material i have to excude from MRP, which is very time consuming..!
Please advise me is there any option in point of view of Storage Location, just simply define the storage location to be excluded from MRP run.
Thanks in advance.
Naveen.

Dear,
Yes you can do it though OMIR or MMSC 1-Storage location stock excluded from MRP.
Also check this link for more details,
Exclude purchase order on storage location from MRP
Regards,
R.Brahmankar
Edited by: R Brahmankar on May 25, 2009 12:22 PM

Exclude storage locations from the MRP run

Hi all,
Is it possible to exclude stock of specific storage location from the MRP run?
Thanks for your help
Thomas

Hi,
2 things,
1. In OMIR for the storage location set that this location is excluded from MRP run (if am right the value to be maintained is 1)
2. In MM02 go to MRP-4 view of the material master, specify plant & the storage location which you want to exclude & in the field SLoc MRP indicator specify that this is excluded for MRP run (if am right the indicator is 1).
The step 1 ensures that all materials which are extended to this storage location will by default have the value 1. And step 2 ensures the materials already having this storage location view are excluded from MRP run.
Regards,
Vivek

Deactivation of storage locations from MRP run

Hi gurus,
How can i deactivate a particular storage location from MRP in a particular plant.
Regards
Kaisar

Hello,
There are 2 ways of doing that.
1. With the Transaction OMIR and selecting th indicator 1 Storage location stock excluded from MRP
This storage location will be excluded from MRP.
2. For a Specific Material(s), if you want the Storage location to be excluded from MRP:
You need to select the storage locatio MRP indicator as 1 in MRP4View of the Material.
Some concerns:
Your Materials are extended to the St.location say xxxx.
Now if you want this storage location to be excluded from the MRP.
By simply seeting the Customization settings will not work.
You need to manually select the MRP4 view and change the St.Loc MRP Indicator to 1.
The Materials created after this customization setting will adopt this settings automatically.
Hope this helps..
Regards,
Siva

Storage location exclusion from planning run

Hi All
I have excluded material from planning run by putting storage location exclusion indicator in MMSC for material.
Iam using kanban replenishment.
In material master, production storage location is same as that of put in MMSC.
I have created Planned independent requirement in MD61, when i do MRP system created planned order.
Please inform if storage location is excluded from MRP in MMSC then why system is considering requirement for that material at that storage location.

Hi Krishna
Please read help for Storage location MRP indicator
Storage location MRP indicator
Indicator that you use to exclude storage locations from material requirements planning at plant level.
If you do not set this indicator, stock, requirements, and receipts are included in MRP at plant level.
Use
You can exclude storage locations from MRP at plant level in one of two ways:
By excluding storage location stock from MRP
If storage location stock is excluded from MRP at plant level, no receipts for this storage location will be created in the planning run.
By planning storage location stock separately
If storage location stock is planned separately, the storage location is replenished with goods if the stock falls below the reorder point.

ATP at storage location level

Hi Gurus,
Can anyone help me how to check ATP at storage location level in the plant in Order and delivery processing.
I have seen configuration that ATP will happne at the plant level.
Venkat

Hi,
Availability Check at Storage Location Level
Example:
Plant stock (1000 pieces) is made up of the stock from storage location 1 (800 pieces) and the stock from storage location 2 (200 pieces). Requirement 2 in amounting to 500 pieces is to be withdrawn from storage location 1. This storage location currently contains 800 pieces. However, requirement 2 cannot be completely confirmed at plant level as only 300 pieces are available. Therefore only 300 pieces are confirmed for requirement 2. If the system confirmed the full requirement quantity, the availability of the confirmed issue 1, for which the issue storage location has not been specified and which draws on plant stock, would be jeopardized as it would be short of 200 pieces.
If the storage location is excluded from planning or if it is planned separately, then there is no longer the need for an additional check at plant level since stock from this storage location is not contained in plant stock.
If a storage location is excluded from planning or if it is planned separately, the check cannot be activated without a storage location (see Scope of the Availability Check).
http://help.sap.com/saphelp_46c/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm
Regards,
nandha

Storage location to be excluded from availability check

Similar Messages

Maybe you are looking for