Storage Locations for Plant

Hi
In application (no access to SPRO), where can I find the storage locations which assigned to a particular plant.
Any Tcode..
regards
RG

You can check in any MM transaction code like in MMBE or in MB52 or in MB51 or in MM03....etc.
In the selection screen of MMBE please go to storage location field and press F4.
Now system will display all storage location with plant and if you wants to see all storage locations belongs to only one plant,in the out put of this field u can enter the specific plant and it will display all storage location for that plant.
I hope it will help.

Similar Messages

Automatically creation of storage location for material, in MF60

Hi all,
my collegue of PP module uses MF60 transaction.
When he puts XXXX as Replenishment storage location, the system tells him this error: To stge loc. XXXX does not exist for material M1010000182 in plant 0001.
In MM i have activate the automatic creation of storage location for plant 0001 and for all movement types.
Why MF60 does not respect this requirement?
If I try to do movement type 311 with MIGO, manually, there's no problem to transfer the material from a storage location to , XXXX s.loc.
Is there something more that I have to do?
Thanks in advance!
Best regards
Alba

Thanks a lot...
the note says:
Summary
Symptom
A material without storage location view exists.
If within a single material document, this material is moved in such a way that no change in stock occurs in total, the system does not create a storage location automatically even if this is set in Customizing.
Additional key words
OMC3, XLAUT
Cause and prerequisites
All postings to a segment (for example, material, plant, storage location) are only executed if a change in stock occurs. Only in this case, storage locations are created automatically. This way it is made sure that no empty segments are created.
Solution
The system behaves correctly.
Header Data
Release Status:
Released on: 07.07.2000 22:00:00
BUT why IF i do 311 in MIGO, system creates automatically storage location (also if no change in stock occurs in total).
AND if doMF60 (that does mouvement 311), system does not create automatically the storage location?
Best regards
Alba

Default Plant and storage location for components in MFBF

Hi,
I have 2 plants 1000-procurement plant and 2000- production plant. I am using special procurement key 70( Withdrawal from alternative plant from 1000 to 2000) for components in Plant 2000. The requirements for the components are transferred from 2000 plant to 1000 plant. The 1000 plant run MRP for the dependent requirements and procure the materials and transferred to the production storage location in Plant 2000.The raw materials are purchased in plant 1000 and transferred to Plant 2000 production storage location based on the manual reservations created with movement type 301. This is fine.
But when I do backflush in MFBF the plant and storage location for the components issue are displayed as plant 1000 which is the procurement plant and the production storage location in plant 2000-production plant location. In the BOM the production storage location is production storage location of plant 2000. Since we use the special procurement key system defaults the plant as 1000(procurement plant) insteadd of 2000(production plant). can we make this plant default to the production plant 2000 as default in the MFBF goods issue screen.
thanks and regards
Murugesan

Hi MURUGESAN !
      Can you give me some information more in Special Procument Configure in plant 2000 like:
          - Procurement type (maybe F)
          - Special procurement (Maybe U)
          - Plant (Maybe 1000).
          - Issuing plant (maybe 2000)
       We will check together.
       Regards,
      Tony

Reg storage location for all the materials in the plant.

Dear Gurus,
In my plant I would like to know the storage location for all the materials in the plant.can u guys suggest me the solution?

If Stock is there in Each Storage Location then You can Run MMBE Report by Inputting Material & Plant. Then it will Show All the Storage Location Stocks for a Plant.
Or you can Run MM60 Report Which will give you Detail Report.
Else you Can Check in MMSC List of Extendable Storage Locations.
Regards,
Ashok

Change storage location and plant for Return Delivery (outbound)

Hi,
I'm trying to achieve the following:
Sales orders contained the 'normal' plant. Whenever a return delivery is created it should default the plant to a 'return delivery plant / storage location'. I've looked in to this and it seems we've got multiple options, however i would like to check:
- Implement V02V0002 user-exit and link with 'return' movement type. Will this ensure plant change aswell?
- Use standard RETA rule and define ?situations?. Could somebody clearify whether we can achieve our goal with this: Change plant and storage location?
Any suggestions to achieve the above are very much appreciated.
Note: Material contains both views for 'return plant/storage location' and 'normal plant/storage location'.
System is R/3 4.6c with IS Retail activated.
Kind regards,
Tim

Hi,
The delivery is created against/follow-on a sales order / subscription order / invoice. I don't think we use/have a 'return sales order'. Yes, we only use 1 plant / storage location for the returns of goods.
To sum it up:
- Implement badi/user-exit ensuring that the plant is changed/defaulted in to our 'returns plant' for return documents.
- Configure storage location via 'shipping condition'.
Correct?
Ps. I don't think we'll achieve changing the plant via configuring a shipping condition for our return document type. As the plant from the sales order doesn't match with the shipping condition it won't be taken in to account? And yes: It is mandatory/requirement to change the plant for customer return documents.
Thank you for your inputs.
Kind regards,
Tim

How to find out the plants and storage location for a given company code

hi
How to find out the plants and storage location for a given company code

Hi
Check for Assignem,ent of Plant & compnay code in OX18
& for Combination of Plant & Storage location in OX09
The total org structure can be viewed in EC01 - Click on Structure -> navigation
& Continue, Click on the Compnay code & the wole structure can be viewed
Thanks & Regards
Kishore

List the storage location for all the plants

Hello
How could I list all the storage locations of all the plants in single view.
I have tried V_T001L but it is go plant by plant level.
rgds
Nile.Y

Hello,
Following link may help you.
List of Storage Locations by Plant
BR,
Tushar

Stock transfer between Plant/Storage location to Plant/Storage location

Dear Experts,
This is a MM component of SAP Retail.
We have 4 brands ( Plants of type B, Plants of type C etc) that needs inventory from the same Distribution center (Plant A) for some common products. Here the direction is to prioritize the inventory per brand. The requirement is one brand should not take the inventory of the other brand.
To overcome this problem , the solution proposed is to have different storage location for different brands in the same DC.
When we run replenishment planning for the brands and do a ATP check, the availability check should consider only the one issuing storage location in the DC which we allocated for the brand.
I do see the following set up in SPRO and I have done the following.
Step1: Activate Stock Transfer between Storage Locations SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> u2018Activate Stock transfer between storage locationsu2019
Step2: Assign Delivery Type and checking rule according to storage
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations->Assign Delivery Type and Checking Rule According to Storage
Step3: Define Shipping Data for Stock Transfer between Storage Locations
SPRO ->Material Management ->Purchasing ->Purchase Order ->set up stock transport order ->set up stock transport order between storage locations -> Define Shipping Data for Stock Transfers between Storage Locations 
Step4: Define Rule for Determination off Shipping Point SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations -> Set-up Storage-Location u2013dependent shipping point determination->Define rule for determination of shipping point
Step5: Shipping Point Assignment According to Storage Location
SPRO->Material Management->Purchasing->Purchase Order->set up stock transport order->set up stock transport order between storage locations-> Set-up Storage-Location u2013dependent shipping point determination-> Assign Shipping Points According to Storage Location
Question.No:1- After completing the above set up in me21n, the issuing storage location field is greyed out. I am not able to enter any value here. Can you please help.
Question.No:2
I do see the following setting.
Under IMG ---> Material Management ---> Purchasing --> Purchase Order --> Set up Stock Transport Order -->Business Add-In for Determination of Issuing Storage Location
Display the IMPLEMENTATION
Double click on the method GET_SUPPLYING_SL
Click the Execute button
Click the detail button on IF_EX_MD_EXT_SUP
Execute GET_SUPPLYING_SL
There is a prerequisite for this BADI .I have done those things.What i dont understand is where to force the combination of supplying site/issuing stor.loc/receiving site/receiving stor.loc
Kindly provide your inputs.
Thanks,
Vasanthan

Dear,
Have You configure MRP in second plant (where you want to transport the Material).
Please try with this and do again Po for stock transport.
Regards
Piyush Patel

Where and how to find the storage locatation for the consignment stock

where and how to find the storage locatation for the consignment stock (customer stock ) for more than one storage location .
table :msku
material no    -   werks - batch
xxx                   sg11 - 200352ac
table : mchb
material no    -   werks -lgort - batch
xxx                   sg11   sg10   200352ac
xxx                   sg11   gs11   200352ac
note : each stock location having same batch no in different storage and my question how to find which link for msku to mchb .

Hi,
Try the table MARD: Storage Location Data for Material, where in the field LABST will give the stock field, against a given material/plant/Storage Loc.
Regards,
JLN

MIGO: determination of storage location for empties

Hello SD experts,
Case: plant A delivers materials to plant B (interplant delivery). This delivery is posted GR through TC MIGO (based on delivery). Now, the issue is that SAP is not able to automatically determine the storage location for the empties (crates and crate containers). Can ayone tell me how we can let SAP do this automatically?
Currently, we use WM for all finished products (storage location 0100). Empties are however not WM managed (storage location 0110). Empties are calculated and added in the delivery (user exit MV50AFZ1); not in the sales order.
All replies are highly appreciated!
Thanks and kind regards,
Wander

Hi,
- If storage location for picking is not specified in the order item, the system determines the storage location when it creates the outbound delivery and copies it into the delivery item. Otherwise, the storage location entered in the order item is used in the outbound delivery.
- The system determines the picking location based on a rule defined in the delivery type. The following rules are shipped in the standard system:
- MALA: The picking location is determined based on the shipping point, the delivering plant, and the storage condition for the material as defined in the material master.
- RETA and MARE: These rules are mainly used in trade scenarios.
- You can also use the customer exit in SAP enhancement V02V0002 to implement storage location determination.
- The picking location search is activated for each delivery item category.
<b>Reward if helpful.</b>

Block Storage Location for Material Movement

Dear MM Gurus,
pl let us know how to block storage location for a material in Plant.
Requirement is transfer posting (MIGO) should not allow by using 311 mov type in sloc, error message to receive.
example ;
material ; 5000
sloc ; 0001
sloc ; 0002
migo-transfer posting should not happen by using 311
5000
0001 - to 0002
we want to block sloc-0002, how to block sloc, pl help if any solution available.
thanx in advance
regards
srihari

Hi,
You can block the material completely for any movement type by checking <b>X Plant matl status</b> in Basic data view of material master.Or if you want to block specific movement type it will have to done thro authorisation but will apply to all materials .Here the authorisation object M_MSEG_LGO can be worked to remove the movement type or storage loaction .
Dhruba

How do I maintain storage location for Planned Orders in APO

Dear all,
Can you help us in maintaining storage location for planned orders in APO. The storage location from material master need to be updated in product master of APO and the same shall be automatically picked from product master during Supply Network Planning run.
Material master CIF is live.
We have got the following content error in CIF consistency check. How ever this is nt goging to harm any thing, but we would like to maintain in both R/3 and APO.
Error:
Plant and storage location in SAP APO: 2004
Plant and storage location in SAP R/3: 2004 FGPA
Thanks in advance
Ram Mohan Rao Kolanupaka

Instead of maintaining additional master data, i would rather use CCR user exits to switch off comparison of planned order at storage location level if the APO storage location is blank. This way you would not have to make changes to PPMs everytime a new scale out of the solution happens.
In SE18 check the user exit /SAPAPO/CIF_DELTA3 (interface RELEVANT_FOR_COMPARE_ORDHEAD)
If it is not possible to switch off this comparison then I guess changing master data is the next step. Do explore with a developer though about the first option.

Is ther a way to block storage location for a particuler User id?

Hi,
Is ther a way to block storage location for a particuler User id.
If yes, how to do it?
Points will be awarded....
regards,
sathya

Hi,
Go to SPRO > MM > Inventory Management and Physical Inventory > Authorization Management > Authorization Check for Storage Locations > Here activate the authorization for storage location under plant
And use authorization object as "M_MSEG_LGO"
Regards
Merwyn

New storage locations for sites

Hi
I have a system landscape of dev, qas and Production systems.
I have a requirement of creating new storage locations for all the existing sites.
But in IS-retail all the store sites are created in WB02.
Many of the sites are not there in dev and qas systems.
Now storage locations being a configurable value i am not able to create new locations in dev system.
Kindly advise how to go ahead
Sunil

You can check in any MM transaction code like in MMBE or in MB52 or in MB51 or in MM03....etc.
In the selection screen of MMBE please go to storage location field and press F4.
Now system will display all storage location with plant and if you wants to see all storage locations belongs to only one plant,in the out put of this field u can enter the specific plant and it will display all storage location for that plant.
I hope it will help.

Storage Locations Vs Plants

Dear Experts,
An appealing business case is to move to a world where locations currently set-up as "plants" (inventory managed but necessarily WM managed), can be mapped as "overflow" storage" locations as that indeed is the physical "truth".
Now given I am talking of a productive system with SD,MM,PP, LE, WMS, APO SNP, CTM are implemented, what all considerations do I need to keep in mind before fiddling with such a drastic change..
I can only think of some repurcussions..basis general and intuitive understanding of ECC-APO integration, but nevertheless this is a major change that needs systematic evaluation of all side effects. The case for benefits is simplicity, ease of planning, reducing number of "plannable" locations (on which MRP and CTM - supply distribution is run)
Example of the supply chain model
- I have a "site" that has 10 plants making 50 products not necesarily unique. e.g. 2 plants making same stuff, 2 others making some other stuff, one dedicated to one material etc. (no case of one plant making 2 products)
-I have storage locations that are currently (incorrectly) are used to manage "quality" status of stocks e.g. 0001 means good, 0002 means on hold, 0003 means near expired etc.
-I have WMS warehouses mappping to plants. not necessarily unique e.g. 5 plants and 3 storage locations is one warehouse and another 5 plants and 3 stoarge location is another warehouse. The need for warehouse is based on material groups needing different ambient stoarge conditions
-I have CTM implemented with quotas, rules and lanes defined from these plants to customer locatons.
-I have MRP being done on manufacturing plants (for procurement) with some storage locations being excluded
-I have SNP planning (for deployment) in supply network based on net requirements at plants (distribution centers)
-I have distribution plants with its own storage locations using stor locs to managae quality status of stocks
-I hire third party warehouses as needed and also defined as plants (DC's) that also has storage locations for managing quality status.
I am looking forward to some feelers and scare factors that such a replacement of plants to storage locations may entail. Obviously it means a lot of things.. changes to valution, WMS,pegging, CTM results etc.
Let me know if you want me to elaborate more on business context. Also please re-assure if such a change to a productive system is at all advisable plus any SAP warnings.. I browsed but didnt find much on such a "re-engineering" exercise.
Regards,
Loknath

Dear,
You can create more plants by the same way I have created plant 2001.
- Tcode SPRO (IMG Customizing)
> Enterprise Structure
>> Definition
>>> Plant Maintenance
>>>> Maintain maintenance planning plant
And the storage locations:
- Tcode SPRO (IMG Customizing)
> Enterprise Structure
>> Definition
>>> Materials Management
>>>> Maintain storage location
Best regards,
Eduardo Junior

Storage Locations for Plant

Similar Messages

Maybe you are looking for