Storage not available

I Don't have enough storage to take a picture! I have deleted apps, picture and emails but nothing helping ! I bought more storage but still not helping ?

Purchasing iCloud storage is not going to help you with your issue. Your device does not have enough available storage to perform the task you want performed. Go to Settings>General>Usage, and under "Storage" at the top, review what is taking up so much room on your device. You may need to remove more apps. If you have a lot of videos that you have taken with your camera, you may need to import those to your computer so you can delete them from your device.
Cheers,
GB

Similar Messages

Available storage not available

I bought more storage again, I should have 20 GB available, still can't take pictures, video or download iOS7 What's up? Thanks!

Unfortunately, you thought you were doing the right thing to purchase storage, but the purchase does not help at all.
Your iPhone has however much storage it came with when you purchased it. That number cannot change.
What you purchased was additional storage space for iCloud backups. This will not help you at all.
To clear space on your iPhone, go to Settings > General > Usage. This will display your storage hogs. Reduce some of them.

Local storage not available

Hello,
I am trying to create a non-clustered server pool with a single VM server 3.1.1, using Manager also at 3.1.1.
So far I've created a Server Pool and added the discovered server to this pool.
The next step would be to create a repository on this server by going to Repositories tab, add a repository and click the "physical disk" radio button. At this point I am able to select the desired Server Pool.
However, I don't see any available disks to choose as the repository - only blank combo boxes:
http://d.pr/i/4eYY
http://d.pr/i/T0G3
This looks to me like a wrong window, since the label is for a san server and not a physical disk array or something along those lines.
The internal server disks are arranged in a raid configuration and a single partition.
I can't figure out what I'm missing. Please advise.

>
What make/model is your hardware, also what RAID controller?
HP DL380/5's have known issues because Oracle uses an unsupported driver.
>
Its a proliant ml150 g6 server, with a P410i Smart Array Controller.
The controller is the same as mentioned in note 1373817.1, which is probably what you are looking at as well. I've experimented with that solution with no positive results yet.
>
To see local storage to the VM the disk must be empty. You can not make one large partition on your raid array and use that same partition for your VM installation... and then expect to see the free space available to be used for a repo.
Check out page 49 of the user guide
As long as no partition and data are present the device will be detected as a raw disk. The choice is yours
to use the local disks either to provision logical storage volumes as disks for virtual machines or to install a
storage repository. If you place a storage repository on the local disk, an OCFS2 file system is installed.
You will have to break up your RAID volume into multiple LUNS. You should then be able to see the unused LUNS. I've personally never done this but I do have some SSD drives I use for extending database cache. I can see these drives just fine locally. The key is there can't be a file system on the disks. Oracle VM expects a raw device.
>
Oh, I shouldn't have said a single partition, as far as partitions go, it's the default layout: /, /boot, swap and free space (it's a single drive as far as RAID goes). Can that work?
Thanks for that info, I might have to reconfigure the RAID as you suggest, I wasn't aware that it must be a raw device, that brings much valued insight :-) Although I should have expected this since VM 2.1 probably works in a similar way, I just never used the VM Manager and didn't study repos.py closely.

Purchased storage not available

I just purchased more iCloud storage (the 10GB plan) but it's still reading that I only have 5GB available. Do I have to activate this plan in some way?

There is a difference between iCloud storage and storage on your iPod. Purchasing iCloud storage does not give you more storage on your iPod.
To download and install an app the iPod needs storage available equal to about three times the file download size.
If you sync from your iTunes library less storage available is required.
Does the app/iPod meet this?

Adobe flash player settings for local storage not available on menu.

The right-click menu for Flash Player does not show the icon for local storage and I can't save online games. Only settings for 'display', 'microphone', and 'camera' show.

The root cause is that the anti-clickjacking logic in our dialog is throwing a false positive (it thinks the dialog is obscured or otherwise tampered with). This happens a lot with videos when pixels are moving behind the dialog.
The easiest way to solve this is to just allow local shared objects.
Go to Control Panel > Flash Player > Storage and select Allow sites to store information on this computer.

I have purchased extra storage but still storage not available

I have purchased extra storage but I still do not have enough space

judyreef wrote:
I did not know this. How do I get extra storage on my device?
By deleting or syncing data off of it to free up space.

Android USB storage not available without restarting udisks2

My problem seems to be specific to Arch (I've got Chakra, Debian, Fedora, and Back|Track installed on other partitions and all is well there), when inserting a USB drive, everything seems to work fine, the Device Notifier alerts me of the new drive, and it shows up in Dolphin. BUT, when I plug in my phone as a mass storage device, it doesn't work. The phone shows up in lsusb, as well as systemctl (sorta) -- the 'sdc' entry is there, just not the partition entries (sdc1, sdc2, etc.) -- same thing in the /dev directory (sdc, but no sdc[x]). Now, if I run "systemctl restart udisks2.service" the partition entries show up in systemctl, the /dev directory, and Dolphin, and the Device Notifier alerts me accordingly... This has got to be something stupid I'm missing. I've been Googling this all day. Anybody got any ideas?
Edit:
Sorry, forgot to mention it's an Android (gingerbread) phone, and I'm running the lts kernel.
Last edited by BuddyLuvve (2013-02-14 06:17:51)

How did you start KDE? As recommended from [https://wiki.archlinux.org/index.php/KDE#Using_KDM_(KDE_Display_Manager) here]?
If you are using xinitrc, please read [https://wiki.archlinux.org/index.php/Xinitrc Xinitrc]. You may have some polikit problem using this method.

CC desktop app fonts and storage not available

How do I get these to work?

nciscyber - obviously you understand this stuff which is wonderful. Can you please give me the novice explanation of what you just posted? I have the same issues / screenshots as posted above.
SInce I have PS CC shouldn't I be able to save / open files from the CC from inside PS? I expected to see a "save" option (in addition to my hard drive folders) for my Creative Cloud. My misunderstanding? Is this "coming soon"? Thanks so much.

XML Publisher report ends up with Warning: not enough storage is available

Hi,
We have customized the AR Invoice print program (Invoice Print Selected Invoices) and have made converted the Oracle 6i report to XML Publisher.
We have around 13000 AR invoicesin the system and when i try running the report for around 300 invoices, it works fine. When i try running it for more, It gives a warning and when i try to open the xml file to see if it is fully generated. I found that the XML File is broken in between and gives an error "not enough storage is available to complete this operation.".
We have around 2 GB space in temp but we are not sure, why this is happening.
Appreciate your help. Many Thanks in advance.
Regards,
Kesava
Mob: 1-832-332-4303

Hi Kesava
Can you check the $APPLCSF/$APPLOUT directory and see if you can see the file and its size? Maybe open it with vi or emacs and goto the last line and see if its complete.
You might also check the OPP log for this request to see if there is anyting in that log?
Regards
Tim
http://blogs.oracle.com/xmlpublisher

Report Builder 3.0 - Not enough storage is available to process this command

I have a customer who uses Report Builder to create adhoc reports against a SQL data warehouse. However, users intermittently encounter the exception "Not enough storage is available to process this command", which appears to relate
to creating/drawing the report.
It would appear that a user can define the required Report SQL, run the report and export it to Excel. However, on occasions, when the user reviews/amends the report SQL, or specify a new value for a existing report parameter, and then try to run the
report, they get an exception, as per the snippet below:-
System.ComponentModel.Win32Exception: Not enough storage is available to process this command
at System.Drawing.BufferedGraphicsContext.CreateCompatibleDIB(IntPtr hdc, IntPtr hpal, Int32 ulWidth, Int32 ulHeight, IntPtr& ppvBits)
at System.Drawing.BufferedGraphicsContext.CreateBuffer(IntPtr src, Int32 offsetX, Int32 offsetY, Int32 width, Int32 height).
The error can also occur after trying to re-export the report to excel. In this case the export works.
In all cases, the user is given the option to continue or quit, but clicking continue just causes the error to be re-displayed so the user has to quit Report Builder and re-open it..
We have monitored the user's resources (citrix session) and they are not using all their RAM or temporary folder space.

Hi jocelyn,
As per my understanding, you got the error on occasions when you change the parameters to run the report, export it to excel or preview the report, right?
Did your report have large amount of rows or columns or did you have image or chart in the report? Did this issue happened on the other reports too?
Your issue can be caused by many factors:
If you have some image or chart in the report. Based on the callstack crashing at System.Drawing, it looks like GDI+ may be a problem. Make sure you have the latest updates installed for GDI+. The interaction of the content of the report with GDI+
may also be something to investigate. If you have many images in the report, each image is a distinct GDI object and could potentially cause a problem.
It also probably running out of space on your computer, so you may need to check the space on your c: drive. If you are running out space, you can try to reboot the computer or delete a few things or somehow getting a bigger hard drive to check the
issue again.
If the issue only happend on this report, I recommend you to recreate an same report to have a test.
Similar thread below for your reference:
SharePoint 2010 SSRS Integrated - Report Hangs and crashes
System.ComponentModel.Win32Exception: Not enough storage
is available to process this command
Not enough storage is available to complete this operation
If your issue still exists, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

XML generated with Warning: Not enough storage is available to complete ..

Hello Experts,
Using XML publisher to generate a report. Report is generated when data is less. I get Not enough storage is available to complete this operation warning when there is a huge data.
The same problem is mentioned here XML Publisher report ends up with Warning: not enough storage is available

Hi Fabien,
If Uint8Array works fine on the other computer, it should not be the problem of the API, but instead it could be the setting or configuration for IE.
Actually using XHR for 500MB zip file is not suggested, base on the documentation:
How to download a file, XHR wraps an
XMLHttpRequest call in a promise, which is not a good approach for big item download, please use
Background Transfer instead, which is designed to receive big items.
Simply search on the Internet, and looks like the not enough storage error is a potential issue while using XMLHttpRequest:
http://forums.asp.net/p/1985921/5692494.aspx?PRB+XMLHttpRequest+returns+error+Not+enough+storage+is+available+to+complete+this+operation, however I'm not familiar with how to solve the XMLHttpRequest issues.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I have an iPod 4s and I am trying to update to IOS 6.1.6. I keep trying to download but it will not allow me to click download and install. I have checked my storage and I have more than enough storage space available. Do you guys have any suggestions?

I have an iPod 4s and I am trying to update to IOS 6.1.6. I keep trying to download but it will not allow me to click download and install. I have checked my storage and I have more than enough storage space available. Do you guys have any suggestions?

The only available, signed, iOS, for your iPod, is iOS 7.1. That's why you can't install iOS 6.1.6.

Win 7 Pro x64 Error 0x8007046a: Not enough server storage is available to process this command.

I installed Win 7 Pro x64 on a reasonably decent machine (Nvidia nForce 680i SLI, core 2 duo, 4 gig ram). It was a clean install on a freshly formatted partition. While copying a large bunch of files from another machine on the LAN, I get "Error 0x8007046a: Not enough server storage is available to process this command." It does give me the option to retry and continue, but the error inevitably pops up again later during the copy. Googling the error, I found a reference to it, suggesting I go to the registry and increase the IRPStackSize (but this article was not specific to Win 7). I tried increasing it as high as 32 hex. This reduces the frequency of the error, but does not eliminate it completely. Also, I now see a new error sometimes that says, "Too many files are currently in use. Quit one or more programs and then try again." That's odd, because I don't have anything else running. I haven't seen these errors when copying files to different partitions on the machine, so I assume it's something to do with network.

Hi,
To troubleshoot the issue, please try to do an In-Place Upgrade to repair the system.
1. Start the computer by using the current Operating System.
2. Insert the Windows 7 DVD in the computer's DVD drive.
3. Use one of the following procedures, as appropriate:
If Windows automatically detects the DVD, the Install now screen appears. Click Install now.
If Windows does not automatically detect the DVD, follow these steps:
a. Click the Start Button, type Drive:\setup.exe in the start search box and then click OK.
Note: Drive is the drive letter of the computer's DVD drive.
b. Click Install now.
4. When you reach the "Which type of installation do you want?" screen, click Upgrade to upgrade the current operating system to Windows 7.
Thanks,
Novak

OVM 3.3.1: NFS storage is not available during repository creation

Hi, I have OVM Manager running on a separate machines managing 3 servers running OVM server in a server pool. One of the server also exports a NFS share that all other machines are able to mount and read/write to. I want to use this NFS share to create a OVM repository but so far unable to get it to work.
From this first screen shot we can see that the NFS file system was successfully added under storage tab and refreshed.
https://www.dropbox.com/s/fyscj2oynud542k/Screenshot%202014-10-11%2013.40.00.png?dl=0
But its is not available when adding a repository as shown below. What can I did to make it show up here.
https://www.dropbox.com/s/id1eey08cdbajsg/Screenshot%202014-10-11%2013.40.19.png?dl=0
No luck with CLI either. Any thoughts?
OVM> create repository name=myrepo fileSystem="share:/" sharepath=myrepo - Configurable attribute by this name can't be found.
== NFS file system refreshed via CLI ===
OVM> refresh fileServer name=share
Command: refresh fileServer name=share
Status: Success
Time: 2014-10-11 13:28:14,811 PDT
JobId: 1413059293069
== file system info
OVM> show fileServer name=share
Command: show fileServer name=share
Status: Success
Time: 2014-10-11 13:28:28,770 PDT
Data:
FileSystem 1 = ff5d21be-906d-4388-98a2-08cb9ac59b43 [share]
FileServer Type = Network
Storage Plug-in = oracle.generic.NFSPlugin.GenericNFSPlugin (1.1.0) [Oracle Generic Network File System]
Access Host = 1.2.3.4
Admin Server 1 = 44:45:4c:4c:46:00:10:31:80:51:c6:c0:4f:35:48:31 [dev1]
Refresh Server 1 = 44:45:4c:4c:46:00:10:31:80:51:c6:c0:4f:35:48:31 [dev1]
Refresh Server 2 = 44:45:4c:4c:47:00:10:31:80:51:b8:c0:4f:35:48:31 [dev2]
Refresh Server 3 = 44:45:4c:4c:33:00:10:34:80:38:c4:c0:4f:53:4b:31 [dev3]
UniformExports = Yes
Id = 0004fb0000090000fb2cf8ac1968505e [share]
Name = share
Description = NFS exported /dev/sda1 (427GB) on dev1
Locked = false
== version details ==
OVM server:3.3.1-1065
Agent Version:3.3.1-276.el6.7Kernel Release:3.8.13-26.4.2.el6uek.x86_64
Oracle VM Manager
Version: 3.3.1.1065
Build: 20140619_1065

Actually, OVM, as is with all virtualization servers, is usually only the head on a comprehensive infrastructure. OVM seems quite easy from the start, but I'd suggest, that you at least skim trough the admin manual, to get some understanding of the conecpts behind it. OVS thus usually only provides the CPU horse power, but not the storage, unless you only want to setup a single-server setup. If you plan on having a real multi-server setup, then you will need shared storage.
The shared storage for the server pool, as well as the storage repository can be served from the same NFS server without issues. If you want to have a little testbed, then NFS is for you. It lacks some features that OCFS2 benefits from, like thin provisioning, reflinks and sparse files.
If you want to remove the NFS storage, then you'll need to remove any remainders of any OVM object, like storage repositories or server pool filesystems. Unpresent and storage repo and delete it afterwards… Also, I hope that you didn't create the NFS export directly on the root of the drive, since OVM wants to remove any file on the NFS export and on any root of ony volume there's the lost-found folder, which OVM, naturally, can't remove. Getting rid of such a storage repo can be a bit daunting…
Cheers,
budy

DCIM folder is not available in the internal storage, and the internal storage folder shows it`s empty

DCIM folder is not available in the internal storage, and the internal storage folder shows it`s empty
Pls help me in resolving the issue

DCIM folder is not available in the internal storage, and the internal storage folder shows it`s empty
Pls help me in resolving the issue

Storage not available

Similar Messages

Maybe you are looking for