STORAGE_PARAMETERS_WRONG_SET when drill down in FAGLB03

hi Experts
i have a memory problem when i try to drill down information on transacction FAGLB03, i check the parameters
-abap/heap_area_dia and
-abap/heap_area_nondia
and do the recomendation for the the dump, but dont work.
any idea?

hi
the operating system is Windows 2003R2.
best regards.

Similar Messages

Pie Chart legend text when drill down too larger

Dear Gurus,
I have this report with Pie chart:
*)Table:
Element Group
Earnings 100
Deductions 30
When drill down (after click on Earnings/Deductions), it become detail like this:
Element Group Classification Name
Earning Regular
Earning Irregular
And the Pie chart legend show this: Earnings, Regular Earnings
->how to remove Earnings?I just want to show classification name as legend.
I use OBIEE 11.1.1.3
Any help will be appreciated
Regards
Joe
Edited by: JoeSSI on Aug 10, 2012 12:33 AM
Edited by: JoeSSI on Aug 10, 2012 12:35 AM
Edited by: JoeSSI on Aug 10, 2012 3:24 AM

Hi Joe,
There was a bug associated with repeated legends in 11.1.1.3 version.Can you check the below document and see if the mentioned patch helps,
Vertical Bar Charts In OBIEE 11g Display Repeated Labels In The Graph Legend [ID 1376185.1]
Regards,
Dpka

Error Message appears when drilling down from a report.

Hi,
I am using CR XI R2.
I have an rpt file that displays a chart from a sub report.
I tested it on the CR designer and report viewer - works ok.
When I display this report in my .Net application, I get an error message when drilling down from this chart : "The Report Application Server failed"
When looking at the log files I see this error message:
4 19 13:11:14.770 5336 5564 (\servers\ras\dtsagent\reporthandler.cpp:11622): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11618 ErrorCode:997 ErrorMsg:"" DetailedErrorMsg:""
This is a Viewer error - but when drilling down from the Report Viewer I don't get this exception.
Does anyone know what this mean?

Too strange and my require a phone support case;
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Three ideas:
1) Install CR designer on one of the boxes where this does not work and try to run the report there
2) Add a line to your code and save out the report just after your database logon once ( .saveAs). try to run this report in the CR designer.
3) Use the [modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility to compare the runtime - both CR and db client between computers that work and those that do not.
Ludek

Limit the members shown when drilling down

Hi,
Is it possible to limit the members shown of a level, when drilling down? I have a dimension in groups with a medium level that has a lot of members, and when I drill down from the top level in this dimension, a lot of members are shown and the graph is too confused.
Thanks in advanced...

Hi all,
I have discoreved how to do this programmatically.
//Limit series to 10 elements
graph.setDisplaySeries(10);
graph.setDisplaySeriesLimit(10);
graph.setAutoLayout(Graph.AL_NEVER);
graph.setLegendScrollbarPresence(ThinGraph.SP_NEVER);
graph.setLegendSeriesCount(10);
graph.setScrollbarPresenceSeries(ThinGraph.SP_NEVER);
//And limit groups to 10 elements
graph.setDisplayGroups(10);
graph.setDisplayGroupsLimit(10);
graph.setScrollbarPresenceGroups(ThinGraph.SP_NEVER);
Hope this helps someone with the same problem...

Issue with drill down to FAGLB03

We have report painter reports that were linked to FS10n (Balance display) on the report interface (in the report library - GR22) so that when we drill-down on a line item in the report, it will show all the detail postings for that line item from FS10N.
We recently created a new client by copying our current system and applying a patch. We are on ECC 5.0, and the new patch level is 17.   When testing this new client, we found that FS10N no longer works.   We did activate the new GL but we did not completely turn on all the functionalities. THis is the same as in our other clients (QAS, PRD) and FS10N works perfectly there (QAS and PRD are on ECC 5.0 patch 10).
In the new client, when we go into FS10N, it gives us a message to use t-code FAGLB03.    We then changed our report painter library to interface to FAGLB03. However, when we drill down from the report, it's still showing FS10n.
In the new GL, is there another way to configure the report interface? I used t-code GR22.
Thank you,
Lanny

Hi Sunil,
Thanks for the reply. And yes, the message regarding FAGLB03 is informational only so this is fine if I were to go to FS10N directly to look up a specific account balance. But when I drill down from my report, I only get to the selection screen of FAGLB03/FS10N and the account number showing on that selection screen is not the account number on which I drill down on from the report.
In our PRD or QAS client, when I drill down from a line item in the report, it immediately takes me to the line item display where it listed all the documents posted to that specific account, so I did not have to reinput the account number and re-execute FS10N.
I tried assigning FBL3N in the report interface, but that did not work either. The report drilldown still takes me to the selection screen of FAGLB03.
rgds,
Lanny

OBIEE 11g Report-When drilling down to lower level, totals are not matching

Hi All,
I am creating a report in Analytics 7.9.6.3 , OBIEE 11g - Let’s say Budget Cost/Actual Cost based on the Date Dimension
Have selected the Fiscal Year Dim, Fact Budget Cost, Fact Actual Cost
FY BCost ACost
2011 100 120
2012 150 140
Total 250 260
But here when I am drilling down from Year to Quarter and Period - The values are not matching with the totals....
FY FY Qrt BCost ACost
2011 2011 Q1 80 100
2011 Q2 100 90
2011 Q3 110 120
2011 Q4 90 130
Total 380 440
Fiscal Year, Fiscal Quarter Budget Cost and Actual Cost are not returning correct results – When selecting cost's by fiscal year, or filtering on a specific fiscal year, the amount returned does not equal the fiscal year total;
when I am drilling down to Quarter and Period Level the BCost & ACosts are bumping the Numbers as above and not matching with totals
Any suggestions?

Check out the query in both the times.Execute against database and try to sum the data for quarter/period and compare it with Year data.
Just try to differentiate is it a report total that is getting wrong or the data in the database table itself is getting wrong stored.
Mark as helpful if it helps.
Regards,
Veeresh Rayan

Workspace error when drilling down on Essbase Cube

An Interactive Reporting Service error has occurred.-Failed to acquire requested service.
(2001)
We're trying to create OLAP queries in IR to deploy through workspace. When I drill down on any dimension, after deploying to workspace, I get the generic error above. Has anyone seen this error?

I have created one report using Essbase cubes in OBIEE11G and when I am archiving the same report at one local server and unarchiving it at some other server then at the other server I am facing this error.
Any replies will indeed be helpful.

How does OBI decide what column to display when drilling down on hierarchy

Hi All,
Lets say I have a logical table called Custom_Account which has Level 1 through 10, where 1 being the total level and 10 being the detail level. I have created a level based hierarchy.
On the total level, lets say I have 2 columns called Hier1_code and Hier1_name, and in the next level, I actually have four columns, Hier2_code, hier2_name, hier2_desc, hier2_details.
Now what configuration settings do I need to make in order for OBIEE to display all the fouce columns from level 2 when a user clicks on a column from level1?
Meaning, how do I define the columns that would be displayed upon drilling down from a parent level to child level.
Can someone please give some clear explanation, as I am confused here.
Thank you,
Peter.

Hi Peter,
After you have defined a hierarchy, you could open the properties of any level in the hierarchy and set the 'Use for Display checkbox' in the "Keys" tab for all the columns you would like to be displayed at this level.
Hope this helps.
Thank you,
Dhar

Rag: Query performence - Report taking long time when drill down a Char.

Hi All,
After executing the report when we try to Drilldown PO Char, then the report used to take long time nearly 60 to 90 minutes and thorough an errors that "An error is occurred during loading" or "Connection Timed Out".
The report is created on Multiprovider which is build on 7 infocubes and the data for the PO char is coming from all the 7 cubes.
So we have created Aggregates on the 5 Infocubes based on system proposal.
Then,
We checked in RSRT, the data is coming from all 5 Aggregates and also when we drill down the PO also the data is coming from 5 Aggregates itself.
But,
The report is running fine and also when we drilldown the PO to show all the PO values, then the report showing all the POu2019s details by taking nearly 15 mins only.
Here our concern is why the report is taking 15 mins when we drill a PO char.
Could any one give suggestions please.
Thanks in Adv.
Raju. E

Hi,
please check this list for query performance:
http://sapbwneelam.blogspot.com/2007/10/checklist-for-query-performance.html
Regards
Erwin

Error when drill down with essbase hierarchy

Hi ,
I am displaying one bar chart with, one Ragged hierarchy dimension "Region" ( structure : total region - > India , US -> India south , US south -> chennai , California) and "revenue" (measure) .
Sometime's the drill down is happening smoothly (region - > sub region - > city) but sometimes its throwing below error :
Error Codes: OAMP2OPY:QIKSHNQU
DXE compiler error. Coordinate in target list must match to*coordinate in group by list. Source name:*
GroupbyAndCoorTableCompiler::run. XML: <sawxd:expr*xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"**xmlns:sawxd="com.siebel.analytics.web/expressiondxe/v1.1"**xmlns:sawq="com.siebel.analytics.web/querydxe/v1.1"**xsi:type="sawq:groupbyField" refCoorID="5"/>*
FYI , I have a product prompt attached with this graph . i.e , when user selects "total product" and drilling down its
working perfectly but when selects "network products" its throwing the mentioned error .
OBIEE version used : 11.1.1.6.2 (Build 120604.0813 BP1 64-bit)
essbase version used : 11.1.2.1
Thanks
sayak

I have created one report using Essbase cubes in OBIEE11G and when I am archiving the same report at one local server and unarchiving it at some other server then at the other server I am facing this error.
Any replies will indeed be helpful.

Error when Drill down on top level of hierarchy node

Hi Gurus,
The following error occurs when I drill down to a "Actual Line items sub report" using the "top node" of an hierarchy based report .
But, the same drill down works fine when I drill down using the very sub level of the same hierarchy (without any further levels of hierarchies).
System error in program SAPLRRK0 and form NACHLESEN_INIT_NODE-01-
Any help or work around suggestion would be highly appreciated.
Thanks
Ajay

Hi,
Thanks for the start.
But, My Hierarchy is already active.
Any other place to check for?

Weird behaviour when drilling down in time hierarchy

Hi Experts,
We have time hierarchy
year--->quarter--->month--->week--->day.
But when im drilling down from Quarter it is showing the week level and not the month level and then again if i m trying to drill down from quarter then it is showing the month.
What can be the issue here?
Regards

Hi,
just check what u have set into preferred drill path tab for Logical level quarter.
Regards,
Vikas
Edited by: user7312087 on Jul 7, 2009 12:27 AM

Incorrect grand total when drilling down

Hi,
I have a simple crosstab report showing budgets and costs against consortia. The consortia names are the row headers.
There is a heiracrhy of practices within consortia.
I have a 'grand total' calculation at the bottom.
When I drill down from any consortium to the practices within it, the total is fine - even if I drill down from all the consortia, as long as I drill down from each consortium one at a time.
BUT - if I drill down to practice level in one go (from the heading bar above the consortium names), the total is doubled!
Has anyone else had this problem? Any solutions?
Thanks

Hi,
The total is doubled because the level1 itself is a total of level2. So, the report will looks like this:
Consortium 100
Practice1 50
Practice2 50
The solution, I would suggest is first have subtotals for each change in Consortium and then add a calculation as SUM(subtotal). Dont display the subtotals.
This is just a workaround though.
Hope this helps,
Yogini

"Enable query drill" opt. with multiple DPs launch all when drilling down

Hi folks,
I am using BO XI R2 and i am experiencing a weird behavior.
I have created a report with 11 data providers and the option "Query drill" enabled. The reason is that I have several COUNT DISTINCT measures that need to go to the database when I drill down (not possible to aggregate them). Basicaly, I have one data provider per item where item could be a table or a chart.
Now, when I do a drill down in one of dimensions in the tables/charts, I check the processes in the database and it looks like it is launching all the data providers, not just the one I am doing drill down with, so the performance is very poor. Anyone has experienced this behavior? Am I missing anything?
Thanks in advance

Hi John,
Following information might be helpful in resolving the issue.
You are able to drill only in one dimension in one report tab. The same dimension contained in 2nd report tab based on the same data provider is not drilled.
This is contradictory to what is documented in the product guide. See page 75 of the guide xir2_wi_analysis_en.pdf section 'Query drill and other reports based on the same data provider':
"Query drill and other reports based on the same data provider
If your document contains other reports that contain dimensions on which you drill in query drill mode, these reports are affected because the query drill modifies the dimensions they contain.
Example: Drilling on a dimension that appears in another report If you have two reports based on a query that contains Year, Quarter and Sales Revenue, and you use query drill to drill down to Year = 2001 on the first report, Web Intelligence also filters the data for Year in the second report to include 2001 only.
You can avoid this (at the cost of retrieving duplicate data into Web Intelligence) by creating a new data provider and rebuilding the other report against it. Now when you drill in query drill mode, the other report remains unaffected."
I hope this will help you.
Regards,
Sarbhjeet Kaur

Remove totals when drilling down

All,
I have an Operating Statement style report with Total Revenue and Total Operating Expenses and then a Net Operating Income Total that sums the two sections. However, when I drill down the hierarchy of accounts I end up with totals that are repeated several times. For example: when I drill into an account "Provision for Doubtful Acounts" to the lowest level under Total Operating Expenses I get the lowest level account's amounts, then Provision for Doubtful Amounts Total, which is the same, Total Operating Expenses, which is the same, and Net Operating Income Total, which is the same.
This gets to be super repetitive. Is there any way to make it so when I drill down some of the subtotals fall away so that there is only one total?

950121 wrote:
All,
I have an Operating Statement style report with Total Revenue and Total Operating Expenses and then a Net Operating Income Total that sums the two sections. However, when I drill down the hierarchy of accounts I end up with totals that are repeated several times. For example: when I drill into an account "Provision for Doubtful Acounts" to the lowest level under Total Operating Expenses I get the lowest level account's amounts, then Provision for Doubtful Amounts Total, which is the same, Total Operating Expenses, which is the same, and Net Operating Income Total, which is the same.
This gets to be super repetitive. Is there any way to make it so when I drill down some of the subtotals fall away so that there is only one total?Yes, the answer is don't use "drill down." Use Navigation>Value Interaction.
Then you can create each detail report with totals you want to see.

STORAGE_PARAMETERS_WRONG_SET when drill down in FAGLB03

Similar Messages

Maybe you are looking for