STORAGE_PARAMETERS_WRONG_SET. when uploding catalogues ( not enough memory)

When a member of our SRM team tries to upload an xml catalogue of size
92mb the process hangs and we get a short dump
STORAGE_PARAMETERS_WRONG_SET. This does not happen when we upload
smaller catalogues. I changed the recommended parameters
abap/heap_area_dia and abap/heap_area_nondia i changed these to a lower
number and then to 0 as per the dump info. We still get this error for
larger catalogues. Any ideas, i looked at various notes but they seem to refer to reports and not catalogues.
Any ideas

may be notes 110172, 552209, 546361 would be helpful for you
you do not need to change "abap/heap_area_dia and abap/heap_area_nondia", the problem is limited virtual address space on 32-bit platforms. You can try to extend the address space as described in the notes above or reduce some SAP SHM (for example abap/buffersize, rdisp/ROLL_SHM, rdisp/PG_SHM etc.)
as long term solution you need 64-bit platform (note 996600).
or you can simply add 64-bit dialog instance to your landscape and leave the transaction run there.

Similar Messages

What does it mean when iTunes say "not enough memory" and won't let me buy songs?

Everytime I try to purchase a song, I get a message that says "The iTunes store cannot complete your request. There is not enough memory available." I have plenty of space on my computer. What does this mean, and how do I fix it?

You need to do as the message says and contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

When opening files "Not enough memory to load TIFF file."

Mac just had a new build of OSX 10.6.8.
Total memory 4gb of which over 3gb is free.
Open any image gives a memory error "Not enough memory to load TIFF file"

Open the linked tiff file(s) in photoshop, and resave with LZW Compression (OFF I Believe). I know you can place an lzw tiff adn usually works fine, but I believe i had this in the past and turned it off/chanegd the RLE settings and Illustrator was made happy. Also look for if the image is photoshop >> image >> 8 bits/channel.

A FIX for error message: When I try to open Snood (it's a game) I get this message. Not enough memory {Error # :: 0, in sound.cp@line 101 Can you help?

After years of playing Snood, w/o problems, I started getting this error message, on my iMac, OS 10.5.8,
with 4 GB of memory when opening Snood: Not enough memory {Error # :: 0, in sound.cp@line 101
My MacBook Pro w. Mac OS 10.6.8 did not have this problem.
Initially I thought that Snood raised its minimum requirement to Mac OS 10.6.
I had several correspondences with Snood. Their tech support is great. Quick and thorough responses.
They thought the issue was in Mac's system preferences/ Sound. It was.
I didn't realize that my sound input and output devices were gone.
The fix was resetting the PRAM. I found this advice on MacFixIt.com.
MacFixIt help with volume: http://reviews.cnet.com/8301-13727_7-10415659-263.html
Resetting the PRAM is on Apple support: http://support.apple.com/kb/HT1379
My sound (music!) is back, along with Snood. So glad I reset the PRAM before reinstalling the OS software!
Thank you to Snood, MacFixIt and Apple.
Happy new year all!

Good work, nice post/tip, thanks!

When I try to import, I receive the following message: "An internal error has occurred: not enough memory". I always download my photos onto an external hard drive.

Yesterday,I downloaded an update for Lightroom 5. Now when I try to import, I receive the following message: "An internal error has occurred: not enough memory". The message comes up right after I click import, before I choose a file to upload.Here is the information I can think of that might be needed to answer this question:
- I always download my photos onto an external hard drive.It is about 10 % full.
- It says I have Lightroom 5.6 64 bit
- I am working from a newer laptop (Windows). The internal drive on the laptop has 289 gb and I am using 61 gb total memory.
- I have edited 2794 photos in Lightroom and it is all in one catalog.
- I did not have this problem until I made the update. I did have my first "bug" earlier this week when one of my photos had a line show up through the middle of it when I exported it. I was able to export it a second time without the line.
If there is more info. needed, let me know. I do photography as a hobby and know enough about Lightroom to edit out blemishes and adjust color balance, but not too much more, so forgive my ignorance if this is an obvious fix.
Sincerely,
Adrianne

Not Enough Memory typically refers to RAM. How much RAM do you have on your 64-bit OS computer? Do you have other programs running that may be using most of the memory?

I just upgraded to Yosemite. Now when I try to open Excel, I get a message that there's not enough memory. When I check the storage under "about this Mac" it says I have 150 GB of 249 GB. Help please. Thanks

I just upgraded to Yosemite. Now when I try to open one particular document in Excel, I get a message that there's not enough memory. I can open other documents. The document I can't get to is the spreadsheet of my passwords. Go figure. When I check the storage under "about this Mac" it says I have 150 GB of 249 GB. I have a MacBook Air. Help please. Thanks, Connie

I just upgraded to Yosemite. Now when I try to open one particular document in Excel, I get a message that there's not enough memory. I can open other documents. The document I can't get to is the spreadsheet of my passwords. Go figure. When I check the storage under "about this Mac" it says I have 150 GB of 249 GB. I have a MacBook Air. Help please. Thanks, Connie

"There was not enough memory" error message when saving DNG and Jpeg

PC/Windows XP Pro. Pentium 4/2Gb RAM.
I am constantly getting memory errors when trying to save batches of images from ACR4 either as Jpegs or DNGs.
A couple of images in to the batch a small window appears with a list of the files and next to each of them is the line: "There was not enough memory."
These are 220Mb TIFF files that are processed in Hasselblad's Flexcolor on the same computer. I can process an entire folder full (sometimes 50 images) without a hitch in Flexcolor, but Bridge/ACR4 and CS3 can't handle any reasonable number of images.
Could it be something in my settings? For the record, they are:
In Bridge, under Edit/Preferences/Camera RAW preferences, Camera Raw Cache is set to 10Gb. Jpeg and Tiff handling boxes are both ticked.
Under Edit/Preferences/Cache, Cache Size slider is slightly over half way to the right.
In addition, I have CS3 pointed to a formatted 500GB scratch disk all to itself.
And CS3's RAM is set to 80%.
Finally, this computer is used for nothing else except image editing.
Any ideas?
Thanks.
D.

Thomas,
Thanks for the reply.
If you mean by "Public Beta", did I download the 10.4Mb plug-in (as per John Cornicello's link above) and install it at Program Files\Common Files\Adobe\Plug-Ins\CS3\File Formats in place of the old plug-in, then yes.
I always run ACR4 via Bridge, never via CS3. CS3 always comes after conversion in my workflow. Also, I like to give Bridge/ACR a free run of available resources. Nothing else is ever open when I'm running them.
In CS3 under Edit/Preferences/File Handling, under Image Previews I selected 'Never Save'. Not sure if this affects ACR though.
Also, as per the suggestion in the article referred to in my last post, I removed the tilde ~ to activate the Bigger Tiles plug-in. CS3's memory % is now set @ 90%.
The only thing I haven't done is to activate the Microsoft 3Gb switch. I can't find instructions that are clear enough. Also, it may be that it makes no difference when running Vista 64bit, as I am.
For what it's worth, with these fine tunings, CS3 now executes the Retouch Artist's Speedtest in 20 seconds, a shade faster than before. This is extremely fast, so my setup should not be the problem here. I hope! ;-)
Finally, is there any point in trying LR? Or is its file saving/cache setup the same as ACR's?
Thanks for taking an interest in my case. I'm very happy to be a guinea pig since I will constantly have to process large numbers of files and I'd like to overcome this problem
Many thanks.
D.

HT1535 When I plug my ipad into the computer to sync a message pops up saying it can not sync because there is not enough memory in the itunes library. Do I need to increase the memory in my itunes library and how?

When I plug my ipad into the computer to sync a message pops up saying that the ipad can not sync because there is not enough memory on the itunes library. Do I need to increase the itunes library memory and how do I do this, or do I just need to trasnfer things out of itunes? Thanks.

Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

TS1702 When I Had To Do An Update For GarageBand On My IPad 2. I Had Not Enough Memory For a that App Update. So I Deleted It And When I Tried To Purchase It Again It Says Installing When It's not So I Cannot Purchase My GarageBand. PLEASE ANYONE HELP!

When I had to do an update for GarageBand on my ipad2. I had not enough memory to instal the update. So I deleted the app and tried to install my app again but it says installing when it's not. So I can't purchase GarageBand ever again. PLEASE HELP!

Hi Ben...almost the same issue...read mine...not sure yet if it is solvable !!!!

X3 "Not Enough Memory" when trying to go to Media ...

Hey there
I did a software update on my phone "Nokia X3-00" but since i did that every time i want to go into my media player it just gives me the "Not Enough Memory" error.
Any help?

Nokia 7210 supernova-I have updated to the latest version v 07.23 n when i play music or view video and when load music player its says not enough memory. i have a 2gb memory on it.any help.

HT1386 Hi when I Try to sync it tells me it can not save cause there not enough memory but I have 13 fb left?

Hi when I Try to sync it tells me it can not save cause there not enough memory but I have 13 fb left?

Hello, peppertwist.
Thank you for visiting Apple Support Communities.
When receiving the not enough space alert, he is the best article to go through.
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
Cheers,
Jason H.

Error 83::8 (not enough memory to initialize PSL) when use layer styles in AEF

Hello!
Have error in AEF CS6 when i try to use layer styles in AEF. Error is "not enough memory to initialize PSL 83::8"
It works good if i start programm as Administrator.
My PC is: Windows 7, Intel core 7 with 2.7 Ghz, 6 Gb RAM, Nvidia GeForce 240.
I think i already know what the problem is:
After i bought my new SSD in need to change all temp files and scrathes disks to another HDD. And in conflicts with AEF ....
How can i fix it?

How can i fix it?
Check your file and folder permissions. Moving stuff around may invalidate old security tokens for user-specific folders. You may simply need to reclaim them and "Take Ownership" in the Security tab --> Advanced of your file properties dialog.
Mylenium

Not enough memory to complete operation when writing TDMS file.

Hello,
I am new to Labview and having a bit of trouble. I attach some code here. What I want to do is sample from a NI 9220 DAQ from 16 channels at 20kHz, while from a second NI 6009 sample from 4 channels at 1000 kHz. I want to append these together and then write to a TDMS file.
I have tried to write this code using NIDAQmx VIs but when I have it has resulted in the two DAQs not having the right timing with each other. The 6009 samples for a longer time.
I have now tried instead to use the DAQ assistant to read from the two VIs and it works in that TDMS files produced have the correct timing between the two DAQS. However, if I record for more than 2 minutes, in the end I want to end up recording for a much longer time, I have the "Not enough memory to complete operation" message appearing. This still happens even if I get rid of my charts to display the data, and also if I get rid of the NI 6009 completely and just keep the 9220 sampling at 20kHz. It happens even if I repalde my TDMS write and put a write measurement assistant in which I tell it to write a series of files that are each less than 2 minutes long.
I think it is something to do with the amount of data I am reading and is being held in memory. What can I do about this? Also, my charts display very slowly, basically evey second when the 20k are read in. However if I lower the amount of data read the charts don't display all the data points.
I attach my code, thanks for your help!
Alfredo
Attachments:
03_02_15.vi ‏688 KB

alfredog wrote:
Hello,
I am new to Labview and having a bit of trouble. I attach some code here. What I want to do is sample from a NI 9220 DAQ from 16 channels at 20kHz, while from a second NI 6009 sample from 4 channels at 1000 kHz. I want to append these together and then write to a TDMS file.
I have tried to write this code using NIDAQmx VIs but when I have it has resulted in the two DAQs not having the right timing with each other. The 6009 samples for a longer time.
I have now tried instead to use the DAQ assistant to read from the two VIs and it works in that TDMS files produced have the correct timing between the two DAQS. However, if I record for more than 2 minutes, in the end I want to end up recording for a much longer time, I have the "Not enough memory to complete operation" message appearing. This still happens even if I get rid of my charts to display the data, and also if I get rid of the NI 6009 completely and just keep the 9220 sampling at 20kHz. It happens even if I repalde my TDMS write and put a write measurement assistant in which I tell it to write a series of files that are each less than 2 minutes long.
I think it is something to do with the amount of data I am reading and is being held in memory. What can I do about this? Also, my charts display very slowly, basically evey second when the 20k are read in. However if I lower the amount of data read the charts don't display all the data points.
I attach my code, thanks for your help!
Alfredo
As far as your charts updating very slowly - the way your code is designed, your charts only get data when both 20K samples & 1M samples are done collecting. Have you tried setting up DAQ assistant for continuous sampling instead of 20K samples or 1M samples?
-BTC
New Controls & Indicators made using vector graphics & animations? Click below for Pebbles UI

Not enough memory error when passing an array to a chart

Hello.
I am trying to pass some data from a reading loop to a display loop using queues and charts.
In order to save on redraws I am reading the queue just once a while, flush it and pass the resulting array to the Chart. It is actually an array with clusters of three values.
Everything works fine unitl I actualy want to display the chart. I can pass the data and see it using an indicator without any problems.
When I wire the data to the chart it randomly shows : "not enough memory to complete this operation"
The fact is the array being passed to the chart is of random size.
The queue size is good for about 20 min. Labview shows an error after a few seconds. After clicking ok it prints out the results correctly and then a second or two later same error.
What am I missing here? Thanks
LV 2012 f3 I7 2.4GHz 16GB RAM
Attachments:
TestChart.vi ‏17 KB

Not sure if it helps or not but here is the error.
I put about 200 elements/s in the queue. That is why instead of reading it 200/s I just want it to read it once a while.
I am not sure what is a bigger burden:copying one 500 elements array twice a second or 200/s and 200 calls to the Queue.
The max size of the queue is not important here. I can set it to something more reasonable and will get the same error.
What will happen to my CPU usage if I put the Chart in the for loop and make 500 call to it? And then half a second later another 500 calls?
As I said at this point I do not know how much history I need or not but all I want is to be able to see a few s of it. If I loose the rest it is ok for now.
Lets says that all I care is to see it close to real time with a history of 5s. It would mean the queue buffer size of 1000.
Back to the main problem: why do I see the memory error window when I know clearly that I have plenty of memory left.
Attachments:
Error.jpg ‏18 KB

I am getting an error message when i try to export "Not enough memory" what do it do?

I am getting an error message when i try to export "Not enough memory" what do it do?

Your 400GB is not what I was speaking of. I was not speaking of disk space. I was speaking of memory.
The memory in your computer needs to be 8GB or more, and you must have a 64 bit operating system (which can still happen even if your computer is less than 12 months old). What operating system do you have? Is it 32bits or 64bits?

STORAGE_PARAMETERS_WRONG_SET. when uploding catalogues ( not enough memory)

Similar Messages

Maybe you are looking for