Storage section check indicator -- ID & Pick point

Dear Gurus ,
1. I have defined new storage type with NO storage section check. then maintained material with storage type indicaor.with storage type search strategy only.
in this case the system does not suggest the bin or even storage type.
But if i maintain the storage section indicator & section search strategy then the system proposing Bin while creating TO.
Then what is the use of deactivating the storage section check while defining the storage type??
2. Can anybody explain me what is the ID point storage type & Pick point storage Type.
Is it mean that the perticular material from storage type can be only picked or putaway from the
storage type that is assighned ID or pick point?
If yes in which scenario it will be utilised or how it works?

What are the other influencing factors you have set for your storage type search? For example stock status, WPC? Activity - E or A or 2-step?
2. Can anybody explain me what is the ID point storage type & Pick point storage Type.
See here for ID point:
http://help.sap.com/saphelp_erp2005/helpdata/en/c6/f846b74afa11d182b90000e829fbfe/frameset.htm
and here for Pick Point:
http://help.sap.com/saphelp_erp2005/helpdata/en/c6/f847124afa11d182b90000e829fbfe/frameset.htm

Similar Messages

Override the storage section check for manual entries

Hi All,
I am facing a issue on Storage section search.While creating To system is giving correct Storage section according t the settings but if I would like to change the storage section to different storage section system is not giving any error message.It is giving only warning message check your enteries.
So I would like know is there is config settings to avoid another storage section selcetion which are not assignned storage search indicator.
I have checked in help.sap.com .I following information .
To set up the strategy for storage sections, see the section on activating storage section searches under Strategies in the Warehouse Management IMG documentation.
If storage section checking is active for the storage type, then the system searches in the storage type only for those empty storage bins in storage sections that have been allowed for the material being put away. When you are creating a transfer order and manually enter a storage bin, then the system checks whether the bin is in a storage section that is allowed for the material.
*You can also make an entry in customizing that permits you to override the section check for manual entries.*_
Can please advice me inorder activate the config for override the section check for manual entries or any warning message.
Thanks & regards,
Srikanth

HI,
Thanks for your reply.
I want Error message.
Regards,
Srikanth P

Storage section indicator functionality

Hi All,
Generally we are using Storage section search for WM in SAP.Previously by using this we restricting some goods movements to particular storage sections.But now this storage section search indicator functionality is not working .I have checked all configuration for storage section search .Everything seems to be correct but this functionality not working .
example: storage section indicator 001 should only be linked to storage section A, but it is also possible to put away in storage section B ?? We have only added section A to 001.
Can you please advice me what configuration settings needed to revert back the settings.
Thanks & Regards,
Srikanth P.

Hi
Check wther the storage section check active indicator is set at storage type level.
Storage section is used to further divide the storage type. It will be used only for Putaway process.
Check the following also
Storage section definiition for the wh no/storagetype combination
Storage typw indicator to the wh no
Material master storage section indicator
Storage bins created with the storage section
Hope it helps
Thanks/karthik

Putaway in storage section PA1 is not allowed

Hello,
While creating TO against TR in LT04 system is giving error message as above said in subject line.
I have checked in LX20 and LS04 bins are there even though still getting same error.
Please let me know what could be the reasion and solution for this issue.
Thanks in advance.

you get this error if the storage section check is made active in customizing transaction OMLZ
here you first define one or more storage section indicators (also named storage area indicator).
then you define a storage section search per combination of warehouse and storage type and storage section indicators and assign the possible storage section for this combination.
in the storage bins (LS01N) you enter the storage section to which this bin belongs.
in the material master you enter the storage section indicator
if a bin is determined which has a storage section that is not among the listed storage sections from the storage section search then the error you have is issued.

Problem over storage section search

Hi all .
Actually , I'm facing a strange problem . When , I came to storage section search option , I got noticed that one of my warehouse's storage type ( RES - reserve storage type ) pre- assigned with "Y" option while activating the storage section search option - that means storage section determination but no check ....
In storage type settings , I made " storage section check " option , remains unchecked . That's fine - but , the paradox , I did the same storage type setting for other storage type , and they showed as " blank " not Y ...
my question is why it shows as Y , instead of blank ?
thanks in advance ............
regards
arghya

As a part of the customizing and implementation of WM, you need to check this customizing step.
When you activate the storage section check, you ought to check this step too, to make sure your
ST's have this setting as required.
So, the default values for this indicator are the following:
* On check (in ST settings) => set to X
* On uncheck (in ST sett.) => Set to Blank
I don't know if there is an option to set the default values for the actions in ST settings, but I highly doubt there are. Also, it seems that in your case it didn't change it at all, so it definitely isn't standard behavior of the system.
You need to test a bit more.
E.g. set to blank, and then activate the check, go back and see what is the result.
Then set to Y manually, then uncheck it at ST level. Again, return to check the indicator.
Now, don't change manually, but go again to ST settings and activate. Return to see the indicator value.
You can try a few more similar tests if you like...
This will give you an idea of what are the rules behind the ST settings => section search indicator (X,Y,Blank).
I have tried at two system now, and both of them behave exactly like I stated before.
Whenever I check ST section search, indicator is set to X.
When I uncheck it, indicator is reset to Blank.

Different storage section get picks while TO creation

Dear expert
Different storage section ( not which has been assigned in strategy) get picks while TO creation
Regards
Karan

Different storage section ( not which has been assigned in strategy) get picks while TO creation
You probably didn't activate the section determination for the storage type. If don't activate this, he ignores your configured strategy.
IMG: Logistics Execution -> Warehouse Management -> Strategies -> Activate Storage Section Search -> Activate, and then check the setting for your storage type.

Transaction code to check warehouse stock with storage section combination

Hello Gentalemen,
Is there any transaction code to check the warehouse stock with combination of storage section in Warehouse Management?
Please let me know.
Thanks

You can use LX02 or LX03. In the tool bar click the third button which will give you the dynamic inputs from LDB(click the storage bin drop down and click on storage section). You can provide the storage section there.
Kesav

User exit to change the storage section indicator (MLVS-LGBKZ)

Hi.
I'm looking for a user exit which be able to change the storage section indicator (field MLVS-LGBKZ) proposed by the material master data in the process of creating a TO (transaction LT06). I haven't found any user exit for this. Do you know any user exit to change this value?
Thanks in advance

hi,
thank you for your response.
whatever the exit which you have been provided, not calling when i creating PR through MD50.
i need an exit which will trigger when we create PR through MD50.
Many thanks,
Regards,
kiran

Putaway in storage section 100 is not allowed

hi,
I am facing a problem
while creatin a TO i am getting an error Putaway in storage section 100 is not allowed
All the strategy for the patricular storage type and the storage section is maintained in the config.
Thanks in Advance
Sunil

your target storage bin has a storage section 100 assigned.
your material master has a storage section indicator.
In OMLZ (storage section search) find the record for your warehouse and storage type having the storage section indicator from your material master, and check into what storage sections (below 1..., 2...., 3,,,) you can putaway the stock.

Storage section sap wm

We have 2 storage section for 1 storage type they are high frequency & low frequency. We are facing issues where most of the bin in high frequency is being taken by 1 material. for example 1 material has occupied 8 -10 pallets. We want to have only 1 or 2 pallets of that material in high frequency storage section so we can have space for other high frequency mateirals. We want to use control qty i.e. if order qty is more than 600 then pick from low frequency storage setion.
How Do I achieve this changes.

Hi Kiran,
you have to distinguish between putaway and picking.
Here in this example,. "A" may high, "C" may be low freq. used material.
For putaway:
If all "A" bins are empty and you store lots of same material with "A", all "A" bins are used until they are 100% occupied by WM.
To avoid this, you may use fixed bins for each material in a "A" bin region. As an alternative (if you cannot use fixed bins) you may code own putaway strategy where the quantity of a material is checked before a "A" section bin is used.
For picking:
If you want to pick large qty from "C" and small qty from "A" you may setup removal strategy "large/small qty" but then you need two storage types which also reverts settings for putaway.
Best regars,
Matthias

Storage section not allowed

I was trying to create a TO with LT01 and mvt type 999.
Its giving an error - 'Putaway in storage section 'A' is not allowed.
It is not allowing to delete these storage sections. I have only 2 storage sections for this storage type.
1.Why this error is coming?
2.What controls this?
Please explain.

SPRO>Logistics Execution>Warehouse Management>Strategies>Putaway Strategy>Define Strategy for XXXXXBins>Click on any of the entries(the bins and data u r working on) and click on the glass symbl...then you will the indicator for Addn Stock....
If you also go through the below, check there as well...
SPRO>Logistics Execution>Warehouse Management>Define Storage Types>Click on any of the entries(the bins and data u r working on) and click on the glass symbl...then you will the indicator for Addn Stock....

WM- Wrongly triggered storage section in 902 storage type

hi
   I maintained the storage section( B11) in 902/ WE-ZONE . When i generated the GRN against purchase order ,
   during transfer syatem storage type 902 is triggering the storage section 001.. i dont want system trigger the storage
   section 001 for storage type 902..the system should generate the 902 for storage section(B11)
With Regards
Dinesh
Edited by: code acess on Dec 29, 2011 5:22 AM

Hi,
This is a std system behaviour, since the configuration is done like this in SPRO.Please check for the settings against storage type 902.
spro->Logistics execution->WM->Master data-->Define storage type -
>Define stsorage section
The system picks the section from here
Regards,
Velu

Diff b/w activate storage section chk via menu path & OMLZ

Hi,
In SPRO>LE>WM>Strategies>Putaway strategies>Define strategy for Fixed Bin,
While activating putaway strategy as "Fixed Bin" it is not possible to tick the check Box "Storage Chk. section active" & getting error as "If you have st.pl.str. "Fixed bin", the area check must not be active"
But in Tcode OMLZ, i can able to activate this Storage section Chk.
I want to understand why such difference & what is the impact if i activate it in OMLZ
Regards,
Baskar

Hi,
OMLZ is storage section search and the menu path is for putaway strategy, both are completely different.
Error message, is you are giving a particular bin as fixed bin but the storage section search is active for that. When the storage section search is active, i beleive fixed bin indicator is not possible.
Regards,
Prabu

WM Pick point

Hi,
for picking from a storage type that is managed by a sub-system I would like to set up a pick point storage type similar to the identification storage type for inbound movements.
I checked the pick point functionality, but that is not what we are looking as it is restricted to handling partial picks in SU managed storage types.
Basically we want any outbound movement from our externally managed storage type to move through a storage type / area / bin.
Any ideas?
Regards
Andreas

Hi,
It was not clear to me why the pick point doesn't fulfill your requirement. Both full and partial SUs go trough it when you do the picking.
Of course, if you don't want to restrict the process only to SU-managed storage types, you cannot use it. But you wrote:
I was rather looking for something analogous to the identfication point for inbound processes:
ID point is used only in case of SU management...
http://help.sap.com/saphelp_47x200/helpdata/en/c6/f8471f4afa11d182b90000e829fbfe/frameset.htm
Other solution might be VAS:
http://help.sap.com/saphelp_47x200/helpdata/en/17/e8d63790630c4fbd27b0dea62d89b7/frameset.htm
Just my ideas I don't know what is the best solution.
Regards,
csaba

WM: Error occurred during storage section search (FGWM05 001)

HI friends
              i done GRN 101(movement type) with mb31 for production order ..based on TR Iam trying to create transfer order i have
the below error. where i missed the configuration
"Error occurred during storage section search (FGWM05 001)"
    Message no. L3 041
Diagnosis
    No storage area search has been defined for this material and this
    storage type.
Procedure
    Contact your system administrator! Note down the material and the
    storage type listed within parentheses in the error message.
with regards
dinesh
Edited by: code acess on Jun 28, 2011 8:30 AM

Hi
In WM customizing Please check for your warehouse/Storage type combnation the storage section search is on and valid.
IMG>Logistics Execution>WM>Strategies>Storage section search
if there is no entry then maintain it. The nest error may be storage bin. Make sure that you create storage bin for whsno/storage type/storage section combination by using LS10 or LS01N)
Hope it helps
Karthik

Storage section check indicator -- ID & Pick point

Similar Messages

Maybe you are looking for